HR-ABAP--infotype for the event

Hello Gurus,
I have the event type as FMLA .I have got the infotype for this event as P0672.
Can you please tell me the infotype for this event type OFLA .
Thanks,

I don't understand the question, could you provide us with the transactions you use.
If I hear HR, infotype and event, I'm thinking transaction SWEHR3 and business objects BUS1065, EMPLOYEET and FAMILY
Regards, Rob.

Similar Messages

  • Infotype for OFLA Event

    Hello Gurus,
    I have the event type as FMLA .I have got the infotype for this event as P0672.
    Can you please tell me the infotype for this event type OFLA .Please its urgent.
    Thanks,

    I don't understand the question, could you provide us with the transactions you use.
    If I hear HR, infotype and event, I'm thinking transaction SWEHR3 and business objects BUS1065, EMPLOYEET and FAMILY
    Regards, Rob.

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

  • Need ABAP code for the below Services requirement

    Hi,
    We have a requirement to show all the services for a particular Purchase order number.For this I built a view on 2 tables ESLL and EKPO.Now based on the below logic I need to bring the services for the Purchase order..
    1.Enter PO number,item no. and Doc category in EKPO and find the Pack no.
    2.Now take the Pack no. of EKPO and give in ESLL and find the Sub pack no.
    3.Now take this Subpack no. and Give this sub pack as Pack no. in ESLL
    4.This will be the Service entry record for that PO number.
    Can any one Please suggest me to how to write the ABAP code for the above logic.
    Thanks & Regards,
    Dinakar

    Hi Dinaker,
    Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
    Thanks,
    SAPBWI

  • Why does calendar assume the time in an event subject,is the time you want for the event?

    If I try to enter any number with a colon, Calendar assumes, that's the time for the event.  Not sure why this change was made.  I need to enter a time in the subject line, and a different time for the event to happen.  Old version allowed this with no problem.  What do I need to do in Mavericks to allow this.???
    Many thanks in advance for any solutions.
    Ned C:

    Hi,
    I have a small application called Multi Event Filter available on the Mac App Store which creates Calendar events from text or spreadsheets.  While not really what it was designed to do, a side effect of Multi Effect Filter is that it retains the times entered for events in the titles.
    You can find more ablout Multi Event Filter here.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Discussions Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • What to use for the events of 2 keys pressed simultaneously?

    Question:
    What to use for the events of 2 keys pressed simultaneously? As the key listener has limited functionality, in this case, I need something that can act to two events (see below)
    Goal
    1. A user presses right and up at the same time
    2. Program responds to this event changing BOTH the vertical and horizontal speeds of the player
    Problem
    I currently have a key listener to do this, using key pressed, however, it only acts to up OR right at one point in time. So the user can only increase his or her vertical speed; or horizontal speed at one point in time. Instead of increasing them both.
    Example
    Here is an example of the game: http://www.kongregate.com/games/MINDistortion/bubbles-2

    DarrylBurke wrote:
    I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
    dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
    P.S. I tested it out. Works like a charm.
    -Create booleans to handle each key
    -Set to true on press
    -Set to false on release
    -Check and update in separate thread accordingly

  • WARNING : CAN NOT ALLOCATE BLOCK FOR THE EVENT !

    Im developing a packet filtering program on Solaris 2.6. When program is executed for a while this warning message appreas :
    WARNING : CAN NOT ALLOCATE BLOCK FOR THE EVENT !
    and screen gets frozen,
    if please somebody knows when and why this message appears, please help...
    Thanks in advance,
    emre celebi
    [email protected]

    Im developing a packet filtering program on Solaris 2.6. When program is executed for a while this warning message appreas :
    WARNING : CAN NOT ALLOCATE BLOCK FOR THE EVENT !
    and screen gets frozen,
    if please somebody knows when and why this message appears, please help...
    Thanks in advance,
    emre celebi
    [email protected]

  • Looking for an ABAP-code for the customer-Exit Variable

    Hello,
    I have defined a Variable (Interval) which should be processed through Customer-Exit on characteristic Supplier-Date (date format). This Customer-Exit Variable is called ZDATE.
    We have another time characteristic Fiscal year / period (0FISCPER) which has single mandatory input variable for ex.  003.2011. This input variable is called ZFISCPER.
    Now I have to write an ABAP-Code where the customer exit variable ZDATE is derived (fiscal last year to last period) from input variable ZFISCPER in INCLUDE ZXRSRU01.
    Means when the input variable (ZFISCPER) is 003.2011 then the customer exit variable ZDATE should be calculated in INCLUDE ZXRSRU01 as 01.01.2010 u2013 28.02.2011 (fiscal last year to last period).
    Since I am quite new in ABAP, I will be grateful if you could write me sample ABAP for this.
    Many thanks.

    Hi,
    should be something like:
    DATA: l_s_range TYPE rsr_s_rangesid,
    input LIKE sy-datum.
    When 'ZDATE'
    CONCATENATE '0101' 0FISCPER+3(4)-1 into l_s_range-low. "You get 01012010
    CONCATENATE '01' Fiscper+1(6) into input.                            "You get 01032011
    l_s_range-high = input-1.                                                     "You get 28022011
    APPEND l_s_range TO e_t_range.
    Greetings
    Roman

  • Need ABAP help for the logic in C_T_DATA

    Hi
    I have a scenario where I need to write ABAP in CMOD for the c_t_data which  appears as below:
    St Dt(sobid)    Enddt(sobid)    Sobid    ObjectID   St Dt(ObjectID)     Enddt(ObjectID)
    21.08.09            27.08.09         34567    40001        23..09.09                 29.09.09
    21.08.09            27.08.09         34567    40002        24..09.09                 29.09.09
    21.08.09            27.08.09         34567    40003        25..09.09                 29.09.09
    21.08.09            27.08.09         34567    40004        26..09.09                 29.09.09
    21.08.09            27.08.09         34567    40005        27..09.09                 29.09.09
    I need to compare all the Start dates of the object ID for every  Sobid with the start date of  Sobid field  and need to set the flag if any of the start dates of  object id is different from the Sobid Start date.
    Please advise what would be the best way to write the ABAP.
    Thanks in advance.

    Hi,
    first you can store these 2 dates into some internal table sat it_sobid  and it_ObjectID.Now
    sort  it_sobid ascending.
    loop at  it_ObjectID.
    Read date from  it_sobid  binary search index sy-index.
    it_ObjectID-date =  it_sobid-date.
    flag = 'y'.
    endloop.
    you can write some logic like this. Its just a rough idea you can modify according to ur need.
    Regards,
    Ravi

  • Ical puts the date in and leaves no room for the event??

    A couple of months ago ical suddenly started adding the date to my event entries and now in month view there is only room to see the date, not the event. How do I turn that off?
    What it does is if I type in "7:30 p call john doe"  it puts it in the calendar as "call john doe" and then on the other side of the entry it says in light grey " May 18, 7:30pm to May 18, 8:30pm "  .
    so because it says all that in light grey, there is no room for "call john doe"
    so my calendar says:  c May 18, 7:30pm to May 18, 8:30pm
    in other words, the event is completely displaced by the date which I dont need to see because the event is already in the box for that day.
    how can I turn this off and why did it start happening?
    thanks,
    Katarina

    nobody has an answer?? has it happened for anyone else.

  • Can you set alerts specific for different calendars so when you create an event, the alert for the event is already set?

    On google calendar if you had a calendar for work and one for school, you can set alerts for earch so when you add a class or work related event, the event is set with alerts for that calendar. Can you do that with iCal?

    Hi Steven,
    This is one of the reasons why I wrote Dates to iCal.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries.
    Best wishes
    John M
    <hr/>As I sell software on my site and ask for donations, the Apple Discussions Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Add 2 infotypes for the employee sub group .......

    hi all,
    i got hold by a issue. as per the business requirement i have to add 2 infotypes for a infogroup . the main issues here is the those infotype should appear only for one of the employee sub group not for all. kindly do the needful.
    grab the points for the solution.
    thanks
    vikram

    hai vikram,
    we can do it by using IGMOD feature.
    Reward with points.
    Regards,
    Chiran Reddy.

  • How to avoid extended checks for the events used in ALV.

    Hii,
    I hav delvpd an alv report in which i hav used events for which i haven't declared PERFORM for the same. but when i had checkd in the Extended program checks it says that form interface is not called directly.. check for dynamic PERFORMS...
    how to avoid this error in the extended check program.

    Another option can be calling the routine from the program itself with a check that never satisfies.
    like:
    if 1 = 2.
    perform top_of_page.
    endif.
    form top_of_page.
    endform.
    Regards,
    Joy.

  • Is it possible to specify a template other than the default for the Event Details Layout?

    Just exactly what it sounds like, and probably a n00b question –– but any help appreciated. Basically, it looks as though the Detail Layout for an event clicked on through calendar display automatically pulls the default template; I'd like to use a different one there.
    Thanks,
    T.E.D.

    Hi,
    Click the "More options" bit on the event - See the Template selection dropdown? There.

  • ABAP QUERY FOR THE VENDOR EMAIL ADRESS

    I am asked to create a report that generates the vendor acct number,partner functions and email address of the vendor. Iam able to create a report for the vendor acct number and partner function by using a query on tables LFA1 and WYT3. Iam not able to include the vendor email address from table ADR6. Can any one tell me how I can also include the vendor email adress into the report. How I can  link all the 3 tables LFA1,WYT3,ADR6??
    Regards,
    Sunil

    Hi
    Are you developing  a report for this code?
    Prepare a executable report in Se38 and go to the Tcode
    SE93 and there create a Report Transaction (second radiobutton)  by giving the Program name and screen number 1000. Save it, Come out and execute that transaction code.
    <b>It seems you have forgotten to reward the points for this
    and closed the thread.
    Reward points if useful</b>Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

Maybe you are looking for