HR ABAP Pinch Feature

hi,
my requirement is related to HR ABAP,
theres a feature called PINCH,
which has following tree/node present...
PINCH
|___TCLAS
        |____A Master Date and time
                |___________Position
now currently the client doesnt have the Position which i have shown in the fig above, they want that to be added into the node,
my question is if we can add the Position node on the tree, what effect will it have on  business.
and if it handles the HR requirement properly, how do i add such a node in that tree.
cheers,
Aditya.

Hi,
Problem is not clear...
PINCH is administrator group which defaulting positions. The administrator group is reponsible for PY, TM and PA.

Similar Messages

  • How can I turn off the Pinch feature while in IE Browser yet continue to use the writing feature

    I found that I can use a stylus pen while in a browser with my HP TouchSmart 300.  It works flawlessly to write however when I rest my hand on the screen (to write)  it recognizes my hand as one point and the stylus pen as the other and the pinch feature makes my screen big or small.  If I could turn off the pinch feature yet leave the writing feature on, all would be perfect.  Can anyone help, please

    It's not possible, it doesn't use pressure on the screen to sense your stylus or hand, it uses the sensor array around the screen.

  • In version 4.0 I can't use the pinch feature on my trackpad to zoom in and out. Is there a setting in Firefox for this?

    I installed v4.0 of Firefox and can no longer use the pinch feature on the trackpad of my MacBook. It seems to work OK in Safart and I'm wondering if there is a setting in Firefox to enable me to use that feature. The way the feature works is that you pinch your thumb & forefinger together or spread them apart to zoom in and out.

    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in cmd_fullZoomReduce
    browser.gesture.pinch.in.shift cmd_fullZoomReset
    browser.gesture.pinch.out cmd_fullZoomEnlarge
    browser.gesture.pinch.out.shift cmd_fullZoomReset

  • Can I turn of pinch feature in Safari 6?

    Hi Everyone.  First post here.  Just upgraded to Mountain Lion two days ago and overall I really like most of it.  I print web pages to PDFs for work many times a day, and some of the sites the pages come from differ in size.  Many of the pages I pring to PDF are only one page, but some are slightly into a second page.  In older versions of Safari, I could pinch two fingers together to adjust the page so the second pages fit onto one page of a PDF, but now pinching two fingers together displays all open tabs.  Is there any way to turn that off?  I would imagine that I can probably adjust some print settings and come up with the same solution, but the pinch to resize feature was just so easy for me. 
    Thanks everyone.  Hope there is any easy solution!

    I have found that you can adjust the scale in the print options screen before you click to save as a PDF.  It works, but not as user-friendly for me as the pinch feature.  Although it helps for now, I'd still like to know if pinch to tabs can be disabled.  Thanks!

  • Using a Mac Book pro with fire fox 4 pinch feature does not work

    I am using a Mac Book Pro an when I upgraded to Firefox 4 I lost the feature of Pinch to view. back to a previous version and it works in there. is Fire Fox 4. Any one got the same problem

    Hello vdurphey, go from 3-bar menu button > Preferences > Content panel > '''Uncheck''' the '''Block pop-up window'''s
    '''OR (i think better option)''' add an exception to your site in '''Exceptions...'''
    see for more information : [https://support.mozilla.org/en-US/kb/pop-blocker-settings-exceptions-troubleshooting#w_pop-up-blocker-settings Pop-up blocker settings]
    thank you

  • ABAP-HR Feature

    hi friends,
    could u plz tell me what is FEATURE Concept in ABAP-HR? and wher we can using this????/
    with regards,
    Priya.S

    Hi,
    When dealing with the HR module or HR data we use the FEATURE concept to define the number range for the various sub-modules and for the other object in HR.
    Ex: To define the number range for the PERNRs,PAYROLL periods,accounting documents etc.
    The T.code for the FEATUREs is [PM03].
    For various modules and various infotype data, there will be a feature. We have to go to that t.code and by using the "feature" value, we can define the charecteristics like number ranges.
    Regards,
    Arun

  • How do I turn off the fancy flick and pinch features in the iPad?

    I'm using my iPad with my son who is severely physically handicapped. He can't do a simple single finger tap and instead uses all five fingers on the pad while moving his hand back and forth. This actually works just fine within the apps he wants to play with, however he often accidentally switches apps, pulls down the calendar, or pulls up more options because he is accidentally performing fancy moves on the pad by mistake. Can I turn off those features - or maybe lock the screen so it's "stuck" in one app and can't move to another by accident?

    You can turn off the multitasking gestures which may be causing the screen to move form app to app when he swipes left to right or swipes up from the bottom.
    Go to Settings>General>Multitasking gestures>Off. That should help some.
    Unfortuantely - You can't turn off the notification center - the calendar that pulls down from the top. If you swipe down from the top, that is always going to appear on the screen. 
    And there is no way to simply lock into one app. You can lock the screen orientation via the side switch or in the task bar at the bottom of the iPad - double tap the home button and swipe to the right to find the screen lock icon all the way on the left -  it isn't locked by the side switch.
    There may be iPad cases that will aid you in preventing your son from accidentally performing these screen movements with his hands, however, you would have to search for those with a Google search or maybe post a more specific question in this help site in order to get input from others in similar circumstances. You need something along the lines of a kiosk case - but one that allows more freedom of touch.

  • Error: Assignment to feature PINCH did not take place

    Hello
    I am trying to do initial data entry using PB10, but the system is throwing an error as "Entry B02 does not exist in T526" (B02 is my personal Administrator) which I have maintained in T526 and when I try to continue removing the Pers Officer, the system is throwing an error as "Assignment to feature PINCH did not take place". The PINCH feature is also maintained for the applicant class
    I have attached the screen shots here. Can some one help me out with the solution? Thanks in advance
    Regards
    Hemanth

    HI Hemanth,
    Can you paste the screenshot of pinch feature its not attached in the previous message. Return value of the PINCH feature must be APPPL for applicant as shown below,
    Regards,
    Mithun K

  • Error was caused by operation ERROR in feature PINCH

    Dear All,
    We have created a new personnel area alongwith new personnel sub areas and assigned it with company code successfully. but when we performing hiring action it is giving error that "Error was caused by operation ERROR in feature PINCH".
    Please assist me in resolving this issue.

    Dear Majid Khan,
    Can you share screen short of PINCH feature where we can better understand,
    1. If you have properly maintained PINCH feature make sure that Administration Group name should be defaulted.
    2. Check PINCH feature is in Active mode or ....?
    Ur's
    Mohan

  • Questions on the feature PINCH

    Hi All,
    1. What is APPL? is it default return value for this feature?
    2. What is **** ?
    3. If I given the return value as APPL, can I give any other group name in 'define administrator'
    4. I need an administrator for each
    5. In 0001, it asks Administrator group. What shall I give there? The same APPL or can I create any other group in 'define administrator and assign?
    6. Can I create more than one group?
    7. Can I make more than one person as an administrator for Payroll/Time etc?
    8. We are creating an administrator, but there we are not adding any employee id. So where we assign the employee with the administrator?
    9. What is SAPname? Is it user name?
    10. Do we need to give the return value for both TCLAS A & B?
    Thanks in advance
    ET

    Hi,
    1. APPL is default return value for Transaction Class B means Applicant.
    2. For defaulting Administrator group from Personnel Area.
    3. You can default administrator from PINCH feature according to your need.
    4. You can configure and default.
    5. In info type 0001 'Administrator group' can be defaulted from PINCH.
    6. Yes you can create.
    7. For each Administrator Group there can be multiple 'Personnel Administration', 'Time Management Administrator', 'Payroll Administrator' and you can configure in T526 pooled table.
    8. With a administrator you can assign SAP User ID with Name, Telephone number.
    9. Yes SAP user Name
    10. If you have recruitment you can configure B also. Otherwise let this remain same as 'APPL'.
    Regds.
    Suman

  • Pinch open and close does not work, can anyone hepl me?

    The pinch feature does not work anymore on my macbook air
    I checked in system preferences, trackpad, and this feature is 'checked'.
    I have turned off the computer, what else can I try?
    Thanks

    Click on the Apple icon at the top left of the screen. Select "System Preferences", then "Trackpad".
    Be sure to select:
    "Pinch Open and Close" in the "Two Finger" Menu...
    Sly

  • Help about uiscrollView pinch

    i have some huge photos in my array. first i resize them and show it with scrollView one by one. and now i want to add pinch feature for my every image for that i downloaded and checked ScrollViewSuite example of Apple. and i applied the codes about pinching part in my project. but i cant pinch them as in Apple's sample code. when i pinch it acts like i copy the image and one of them zooming. is there anyone who can help me about that ?

    Well your probably in labor but try holding down the power and home button and when the slide to power off comes keep holding until it flicks off then keep holding till you see the apple symbol.

  • Steps for ABAP Mapping

    Hello,
         Can any one explain how to do ABAP mapping?and necessary trancsaction codes for this?
    Ex: I am sending PO to reciever system.
    And if posibel screen shots....plz
    Thank you

    Hi Jyotsna,
    Which mapping we need to use..
    /people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/mapping%2btechniques
    ABAP MAPPING...
    You can implement the following mapping programs by using the ABAP Workbench:
    •     ABAP mappings [Seite 375] in ABAP objects
    •     XSLT mappings (ABAP Engine) [Seite 376]
    Use
    ABAP mappings are mapping programs in ABAP objects [Extern] that customers can implement using the ABAP Workbench.
    Prerequisites
    Note the prerequisites in the sections Purpose and Integration as well as the Restrictions in Mapping Development with the ABAP Workbench
    Features
    An ABAP mapping comprises an ABAP class that implements the interface IF_MAPPING in the package SAI_MAPPING. The interface has a method EXECUTE with the following signature:
    Importing Parameter                                               Parameter Meaning
    SOURCE(Type XSTRING)                                   Source XML document
    PARAM(Type Ref To  IF_MAPPING_PARAM)            Parameter object for read access to runtime constants (see below)
    TRACE (Type Ref To IF_MAPPING_TRACE)     Trace object for writing messages in the mapping trace (see below)
    Exporting Parameter                                                  Parameter     Meaning
    RESULT (Type XSTRING)                                Target XML document
    Exception: CX_MAPPING_FAULT
    Applications can decide themselves in the method EXECUTE how to import and change the source XML document. If you want to use the XSLT processor of SAP Web AS, you can use the ABAP Workbench to develop a stylesheet directly (see XSLT Mappings (ABAP Engine) [Seite 376]) rather than using ABAP mappings
    Runtime Constants
    In ABAP mapping you can read access message header fields. To do this, an object of type IF_MAPPING_PARAM is transferred to the EXECUTE method. The interface has constants for the names of the available parameters and a method GET, which returns the respective value for the parameter name. The constants are the same as in Java mappings [Seite 367], although the constant MAPPING_TRACE does not exist for ABAP mappings. Instead, the trace object is transferred directly using the parameter TRACE of the method IF_MAPPING~EXECUTE (see above).
    regards,
    Kishore

  • Use of ABAP Stack

    Can you please let me know what is ABAP Stack

    Fundamentals 
    Summary
    A comprehensive integration and application platform, SAP NetWeaver™ heralds a new approach to IT development and applications. It brings together the disparate worlds of packaged applications and custom development in a single ecosystem, in which enterprise applications as we know them become the building blocks of a new generation of service-oriented applications.
    Custom development with SAP NetWeaver™ is about the very latest in application development practices. Efficiency and flexibility are the watchwords. Application development is based on the model-driven paradigm – as little coding as possible, paired with maximum application robustness and flexibility with regard to front-ends. It is about visual, pattern-based programming that still offers complete control for the power developer.
    By SAP AG
    23 May 2007
    Architectural Background
    SAP NetWeaver is based on a dual-stack architecture based on ABAP and Java. While ABAP has been with SAP for years and provides a robust and scalable development and runtime environment for any type of business programming, Java is based on open standards and leverages SAP NetWeaver to the broad community of Java developers. In a service-oriented environment, however, the programming language boundaries disappear, since components written in one language (for example, ABAP) can expose their capabilities as services that are consumed by components written in another language (for example, Java). The interoperability is achieved through Web services standards that have been implemented for both stacks. Likewise, SAP’s user interface strategy is built on top of the Web Dynpro programming model that is supported seamlessly both in the Java and in the ABAP space.
    The question of which environment you should use when depends on a couple of criteria that have to be weighed up carefully.
    ABAP’s strength lies in its proven application server architecture. The language is based on a strong integration of OPEN SQL and manages large data sets known as internal tables. This allows use of ABAP in transaction-oriented environments with good performance. The development environment (ABAP Workbench) is tightly integrated in the application server. Since ABAP is essentially a server-based development infrastructure, work in large development teams is organized by means of the correction and transport system in a distributed development landscape. ABAP supports a variety of data types that are optimized for business processes. Many important engines of SAP NetWeaver such as the BI OLAP engine or the XI integration engine are implemented in ABAP.
    Java focuses more on the user interface side although more and more applications make use of the entire Java stack from user interface through business logic to persistence. Many of the ABAP scalability features have been adapted for the Java stack, such as the proven scalability using a J2EE dispatcher and J2EE server nodes (that correspond to the ABAP dispatcher and work processes). The NetWeaver Development Infrastructure organizes distributed development in teams by means of a central repository and build and transportation services similar in philosophy to ABAP’s change and transport system. However, there are subtle differences that have to be taken into account. Java development is carried out on the client side in the NetWeaver Developer Studio. A local J2EE engine makes it easy for Java developers to work offline and later integrate their work in a central test system. Sources are checked out locally so that you only need to connect from time to time to the development infrastructure. SAP has implemented a lot of SAP NetWeaver components in Java, such as the J2EE server itself, the Portal, and the Developer Studio to name just a few.
    ABAP and Java are code-based environments. Although they offer model-driven and highly-graphical tools such as the Web Dynpro View Designer or the Web Dynpro Data Modeler you end up in editor and debugger sessions, since most of the developer’s work has to be done here.
    Finally, it is important to note that SAP NetWeaver is in transition from an integration platform to a composition and business process platform.
    Composite applications can be developed on top of SAP NetWeaver and are supported by the composite application framework (CAF) and Guided Procedures.
    Both technologies accelerate composition on top of SAP NetWeaver, but are integrated in the Developer Studio and leverage existing technologies such as Web Dynpro and Adobe Forms integration.
    Regards
    Ben

  • Mackintosh user - unable to resize screen using pinch

    I am unable to use the pinch feature on my Mac to resize the Firefox browser. I read the community blog about another Mac user who experienced the same problem and his solution is beyond my expertise. Nevertheless, I would really like to use Firefox instead of Chrome or Safari because I enjoy the independent community branding of Firefox. However, without the simple ability to use a primary feature of the Apple computer to resize the browser makes it a more unlikely transition. I have never had resizing issues with Chrome -- why is it so with Firefox? And why is it so laborious to accomplish?
    Please help. I really want to a sole user of Firefox. Thanks

    Hi, I think that works only with safari alone.

Maybe you are looking for