HR:Address Issues after RUP6

Hi All,
We have recently applied RUP6 in our prod enviornment.What we found every employee got default Work Location Address
populated same as Employee Primary Address.
I have verfied the data in per_address table and the employee has only one record.
I did verify in the per_addresses_v view and and the employee has only one record.
We cloned the PROD to a another Instance and the address is fine in the cloned Instance.
We did not find this issue in our Test Instance was applied RUP6 Patches.
This issue is not on the Known Issues of RUP6.
Anybody encountered this issue.Are there any profile changes in PROD ?.If so why this issue will not be in the
cloned instance.
Any input is highly appreciated.
Thanks,
A

Please see if these docs help.
Concurrent Program > Update Tax Records After Location Address Change Report Resets State Unemployment (SUI) Of Work at Home Employees [ID 276117.1]
Understanding Employee Address and Location Address within Oracle Human Resources (HRMS) [ID 469674.1]
Thanks,
Hussein

Similar Messages

Self-assigned IP address issue after upgrade

I do a lot of file transferring from my mac to another pc laptop, so I've got them hooked together with an ethernet cable. I had this issue in the past, where I'd try to connect but my network settings kept saying the "ethernet has a self-assigned IP address and will not be able to connect". The solution I found to fixing this was to open up the Advanced Settings, and change the IPv6 configuration to "Link-local only" and then everything would work perfectly.
I upgraded to Yosemite yesterday, however, and now that solution no longer works. Still getting self-assigned IP. How can I fix this??

I took the following from the Aztech website:
8) Can Aztech HomePlugs work with Apple MACs?
Yes they can, Aztech HomePlugs work with Apple MACs. However, there is a requirement for using the Utility software. The Utility software will only run on Microsoft Windows 98SE / ME/ 2000/ XP/ Vista.
Which contradicts itself, if the Utility is required but only runs on Windows, how does that work on a Mac?

Authorization issue after the Support packs upgrade

We're having problem on authorization issue after the SP upgrade.
One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
And the SU53 showing problem on S_TCODE FAGLL03.
How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
Thank you in advance.

How can i send you the trace file? What is your email address?
If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
Anyhoo... (copy right @ David)
What are the objects been caught in category RC=4, RC=12?
Relate them with functional aspect of the transaction (error screen)
Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
Regards,
Arpan Paik
Edited by: P Arpan on Aug 23, 2011 2:36 PM

Issues after Upgrade from Oracle 10.1.0.5 to 10.2.0.5 in Windows Server2003

Good Morning Good People,
I have run in to some issues after upgrading my 10.1.0.5 database to 10.2.0.5. Initially after the firtst upgrade from 10.1.0.5 to 10.2.0.0 one has to run Critical Patch set 4 to get to 10.2.0.5. Well after initial up grade everything worked fine. I could connect to the database from within the server as well as remotely through SQL*PLUS client. However, after completeing the patch I'm still able to connect to the database from within the server, but remotely i get the following error:
ORA-12514 : TNS Listener does not currently know of service requested in connect descriptor.
I also get Error ORA-12505: TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=mcquery2)(protocol=tcp)(port=1521))(connect_data=(sid=mcquery)(server=dedicated)))
I've tried serval different things to trouble shoot the issue but nothing seems to work.
If anyone has run into s similar issue please help. This is ruining my weekend! LOL!
Edited by: user10835577 on Aug 29, 2010 9:15 AM

From the client or the server?
SERVER:
tnsnames.ora:
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
FROM REMOTE SQLPLUS Client:
tnsnames.ora
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
Thanks,
Malcolm
Edited by: user10835577 on Aug 29, 2010 12:01 PM

Exchange 2013: Problem with Default Global Address List after migration

I just completed a migration from Exchange 2007 to Exchange 2013. The 2007 box has been decommissioned just last week. I have been seeing weird issues with our offline addressbook and global address list, since the migration, but always thought
it was related to Ex2007. Well the issues still exist and here's what i've found so far:
1. If any user goes to Schedule Appointment in Outlook, and they click the Rooms button (on the Scheduling Assistant page), we get a LONG wait (about 5 mins or more) and then an error that says: "The operation could not be completed because
an offline address book is not available. Download a copy of the offline address book." When i click OK, the address book is up, with the "All Rooms" list showing blank (we have 3 rooms in Exchange currently).
2. Now if I go to the Address Book in Outlook it opens to the GAL and it's up to date... I can also force an update to the offline address book after adding a new group or entry, so i know offline address books are being updated properly and
working. HOWEVER, if i go to any of the other address lists (besides Contacts and GAL) under All Address Lists (All Contacts, All Groups, All Rooms, All Users and Public Folders) I get the same error given above: "The operation could not be
completed because an offline address book is not available. Download a copy of the offline address book."
3. I went to the Exchange 2013 EAC and went to Organization -> Address Lists. Everything under here said 'NO' under the Up-to-Date column. When i looked at the properties on each list, and clicked save, I had to update to the new version.
After doing this, the Up-to-Date column said 'YES'. I could do all lists EXCEPT for the GAL. It still says 'NO'
4. The last thing i did was set my Outlook to NOT be in cached mode. This should give me a direct connection to the GAL and all lists, if I'm not mistaken... So when i do this, I cannot even open see the GAL. The ONLY option in the
Address Book that comes up is Contacts (which are my personal ones).
5. I just now ran Get-GlobalAddressList | fl in powershell on the Ex2013 server. I see some things that make me wonder... First; nothing in the RecipientFilter field, however, there is something in the LdapRecipientFilter field.
Second; the RecipientFilterType field says "Legacy". and Third; the RecipientFilterApplied field says "False".
Didn't know what these should all be, but it appears maybe this is the cause of all my issues?? Can someone help me out here.. even if i have to recreate a new GAL, i'm fine with that, I just don't know all the steps to do so. I just need it
to work!
Thanks
Jeff
-Jeff

Hi,
In my opinion, it is better to confirm whether the GAL is good, first.
How about the GAL working in OWA?
If GAL working well in OWA, it seems the issue on the Outlook Client or Connectivity side.
Please trying to run Outlook on the safe mode to avoid some AVs, add-ins and firewall for testing.
Please follow the steps as below to narrow down the OAB issue.
Following are the locations that .lzx files in CAS server and BMX server:
CAS:
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
MBX:
C:\Program Files\Micorosft\Exchange Server\V15\ExchangeOAB
Please verify whether the .lzx files update to the latest.
1. If the .lzx files in MBX server not update to the latest.
It should be an issue on the OAB generation side.
2. If the .lzx files in MBX server is latest, but CAS server not.
It should be a distribution issue.
1) Please run Get-OabVirtualDirectory command in EMS to verify whether at least one OAB VD exist in the org. If not, please create a new one.
2) Please make sure whether any setup for Web Distribution. Selecting the “Enabling an Offline Address Book for Web Distribution” checkbox.
3) Please force restart File Distribution services to distribute OAB files manually.
3. If the .lzx files in MBX server and CAS server are all update to the latest.
It should be the connectivity between CAS server and Client issue.
1)Please verify the network.
2)Please check DNS, MX, etc. configuration.
3)Please run “Test E-mail AutoConfiguration” to check the AutoDiscover details.
   Please make sure the OAB URLs are correct.
   If the OAB URLs are incorrect, please using following command to re-set them:
   Set-OABVirtualDirectory -Identity "ServerFQDN\OAB (Default Web Site)" -ExternalUrl
https://www.contoso.com/OAB -InternalUrl
https://mail.contoso.com/OAB
4)Please checking the App log and finding solutions from Microsoft Technet articles or KB, according to the Event ID.
5)If it still not working after performing the methods above unfortunately, please trying to re-build OAB Virtual Directory.
   Article for reference:
   Remove, Re-Create, and Reconnect an Offline Address Book Virtual Directory
http://technet.microsoft.com/en-us/library/bb123595(v=exchg.141).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Why can't I open and retrieve my files from iPhoto and my address book after importing the files from my Power mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295

Is there a fix for the wifi connectivity issue after ios6 update?

Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

WRT600N weird MAC Address issue

I've had the Linksys WRT600N for several months. One day the internet connection stopped working, after I power cycled it, I called support and they had me change the router to clone MAC address after that it worked. If I took off the cloned MAC the internet wouldnt work. So I got curious after that and I restored the router the settings file I had backed up previously. I tried my internet connection and everything worked. No clone MAC address, however, after about a month it stopped again. The issue was making sure clone mac address was on. My question is why does that keep happening there shouldnt be a reason that it would need my computers mac if my isp doesnt need me to do thaa. (ISP = Optimium) Has anyone had this problem or know what the cause is?

You have to tell what you did exactly if it did not work.
Generally: many ISPs (most cable ISPs) only grant you a single public IP address, i.e. a single device connected to their service. Most do this by storing the MAC address of the device connected to the modem. If you connect a different device with a different MAC address into the modem they won't accept it. You won't get an IP address. You don't have internet. Only the device with the MAC address stored (or a modified MAC address set to the stored MAC address) will have internet.
Some ISPs reset the stored MAC address if you call them. With a few ISPs this is the only option.
Most ISPs reset the MAC address after a few hours of inactivity or in fixed intervals.
Some ISPs recognize if you reset the modem and reset the MAC address then.
After it is reset you can connect a different device and it will get the IP address.
Now, if your internet at some point does not work and for a test you connect the computer directly to the modem and you get internet then, at that moment you already have locked in MAC address of the computer and you have to use the MAC address clone on the router.
Thus, if you need the MAC address clone or not depends on what you did when exactly after how much time of inactivity when the internet did not work anymore.

MAC address issue----Spearman

Saw your comments on this in the post about the 1.9 bios for neo2platty ....
I can confirm that My MAC address issue was caused by the bios that you sited in your comments....all F's were written to My nvidia lan too...
only solution from what I have read is too rma it...'bummer'
just thought You would like to know.... Your not alone

I had the same problem yesterday and after many hours searching the web I ended up with this post that made me really desperate... But I didn't give up and while trying a new bios flash because of random crashes when in the bios, I noticed the obvious: you can change the MAC address when flashing
use the last version of the dos flasher with the parameters /nvmac:xxxxxxxxxxxx/wb after the name of the bios file; it's explained if you ask the help with the /help parameter. You can find the mac address on a stick on the parallel port.

Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home. Any suggestions on where to look to fix this?

Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?

That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

WiFi issue after 6.1.2 upgrade

I upgraded my OS to 6.1.2 and now I'm having troubles connecting to the internet at work. I did reset my network settings and inputted the appropriate password and still having issues. It identifies the network but when open safari or an app requiring internet connection it goes nowhere. Is anyone else having this issue. Does anyone know how to fix this problem. Keep in mind my connection works fine at home.

Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Lumia 1520 Battery Discharge Issue After Updating ...

After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
Steps I've Taken:
Soft-reset
Full factory-reset
Moved all apps off microSD card (this improved situation maybe 5%)
Disabled almost all background app use in Battery Saver
Replaced microSD card when I thought this was a memory write/read issue
Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
Other reported cases:
Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
Attachments:
Battery drains fast.JPG ‏147 KB

Issue After Rating setting is enabled to the Discussion Board List in SharePoint 2013.

Hi ,
We are facing issues After Rating field is added to the Discussion Board List in SharePoint 2013. We are getting below error while adding a new item or editing a new item. Did anyone got this issue earlier and any solution for this.
Ashish Kumar Baranwal

Users which were getting issues actually getting below error:
[COMException (0x81020014): One or more field types are not installed properly. Go to the list settings
page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String
bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter
pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +0
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName,
Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter
pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +565
[SPException: One or more field types are not installed properly. Go to the list settings page to delete
these fields.]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName,
Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFil
Ashish Kumar Baranwal

Issue After Rating field is added to the Discussion Board List in SharePoint 2013

Hi ,
We are facing issues After Rating field is added to the Discussion Board List in SharePoint 2013. We are getting below error while adding a new item or editing a new item. Please help on this.
Ashish Kumar Baranwal

Users which were getting issues actually getting below error:
[COMException (0x81020014): One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID,
String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress,
Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +0
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +565
[SPException: One or more field types are not installed properly. Go to the list settings page to delete these fields.]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +2336
Ashish Kumar Baranwal

IPhone syncing issues after iTunes upgrade

Hi
I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
I tried authorizing the computer but I just get "This computer is already authorized".
there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
Would re-installing iTunes help?
Any ideas?
Thanks
Chris

Hi Chris,
Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
-Jason

HR:Address Issues after RUP6

Similar Messages

Maybe you are looking for