HR ALE Replication and total automation

Dear All
Can we totally automate the SRM ORG replication from SAP-HR, so that we don't need to adjust any settings manually in SRM?. (We can load the attributes using the exit available in the idoc exits). Has any one tested this and working for you?. Can we automate the function tab setting (like marking an ORG as Purchase ORG/Purchase Group/Company) while loading the data into SRM from HR?.
Thanks in Advance.
velu

Check thread
Re: SRM org and HR org in SAP ECC
Regards
Lauren

Similar Messages

Oracle Replication and SQL*Load direct Path

We are setting up Oracle replication and have a few tables which are loaded using SQL*Loader Direct path. I have following questions:
1. Can MultiMaster replication replicate direct patch sqlloaded data.
2. If the answer to the above question is no, should we set up a new snapshot replication group . All other tables are in the Multi Master replication.
3. Another question is on the number of replication groups. How many of these we should create. We have total of about 500 tables and database size is about 450 Gig. We plan to replicate all the tables and the refresh interval we want to be one minute for all the tables. Does having more/less replication groups help??
Thanks for your help

We are setting up Oracle replication and have a few tables which are loaded using SQL*Loader Direct path. I have following questions:
1. Can MultiMaster replication replicate direct patch sqlloaded data.Yes, I don't think it should matter how the table is getting updated.
2. If the answer to the above question is no, should we set up a new snapshot replication group . All other tables are in the Multi Master replication.see above
3. Another question is on the number of replication groups. How many of these we should create. We have total of about 500 tables and database size is about 450 Gig. We plan to replicate all the tables and the refresh interval we want to be one minute for all the tables. Does having more/less replication groups help??
Thanks for your help I believe what Oracle recommends is that you split up your tables into replication groups transactionally. I personally have 6 replication groups supporting 700+ tables. They are broken up more by business function than by number and size.

Adv Replication AND Label Security

Has anybody implemented Adv Replication AND Label Security?
I am looking for any advice and warnings.

Your replication administrator accounts (REPADMIN,etc) will need to have the OLS READ (or FULL) privilege for the policy on the replicated tables so that the predicate is not added. These users will see and replicate everything, there is no way (in Adv. Rep) to replicate data based on the OLS label (say, to only replicate things that are S instead of TS).
As long as your replication admins have full privilege (or potentially the system privilege EXEMPT ACCESS POLICY, but this bypasses all policies/vpds and shouldn't be used unless you need to and understand the impacts), everything will work out just fine.
Likely you are aware but if you intend to have the data protected on the target(s), it will need a copy of the policy and the policy applied to the tables as well. You can use database managed OLS and manage the policy in both (or all) places, or evaluate central management of the policy in OID. As much as the OID method has its advanages, I would stick to managing the policy in the database (and automating distributing the changes to different environments) unless you have another good reason to use OID.

Internal table in Excel output with Header and Total

Hi All,
I have a selection-screen of a report where there is option to specify the path of a file to be stored in local PC. This Report gives output in ALV format which displays header and total of columns.
Now, the requirement is, when the user specifies a path for the file in selection screen it should download in the specified location with header and total row into an excel format.
The issue is, I have the internal table with data without total and header row and the total is getting displayed in the screen through ALV feature. I am not sure, how to give the same output in downloaded excel with header row and total as it is displayed on screen.
Please let me know, if you have any suggestions.
Thanks & Regards,
Anshumita.

try using TOP OF PAGE event and write the number of records in the header part.
hope this will help.

Display 6 line items and total in main window

Hi,
I want to display only 6 line items in main window( on first page and also total of the main window of first page), and consecutively in all the apges i want to display only 6 line itms and total in each page of main window, how to write logic for this.
Thanks,
Donlad

Hi r u talking about Snmartform if yes
Let us take the page you are using as PAGE1, you can achuve this using the Command Node. call the same page after 6 items as follows
1.create Table.--->Main area , Header and footer.
2.Declare a variable V_count type sy-tabix.
a.Now click on the table tab>Main Area>right Create>Command (insert a command node after the Line type you r using to print the data), in this COMMAND node give the condition V_COUNT = 6. GOTO>PAGE1 (it maens you r triggering the new page after the 6 lines.
b. after this command noder insert the Program lines heate increase the value of V_COUNT.
Maintain another variable the use that for page totals...
total can be doneautomatically by using the TABle-->CALCULATION TAB.
let me know if you more clear info, iam sure u r problem willbe solved.

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

Do not include some lines in Subtotals and totals in ALV

Hello All,
I am printing a report with all sale order details and Quantities( delveered ,conformed etc..) iam doing subtotals based on the material and Plant.
In this if the document date is less than the SY-DATUM, we should not include the quantity into the subtotals and totals, Only the orders wiht doc date GQ to Sy-datum then display them..
As of now I am using ALV grid display and doing the sums by
l_wa_fcat-do_sum = c_x. (field catalog) for the whole colom) but i want to avoid sum row from tehe calculation based on the condition.
<b>Do we have any way to achive this, like if we want to have separate color for a purticular Cell then we add an extra field in outout table and we link this field with layout-coltab_fieldname in the same way or any other way if we have</b>.
I will be thankfull to if you can provide me your valuable suggesstions on this. it is very urgent. I am trying in all the ways from my side.

Hi,
see this code,
Complete code for the ALV grid example
This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
The example shows:
How to setup the ALV grid
How to ste focus to the grid
How to set the title of the grid
How to allow a user to save and reuse a grid layout (Variant)
How to customize the ALV grid toolbar
Refresh the grid
Set and get row selection and read line contents
Make and exception field (Traffic light)
Coloring a line
Steps:
Create screen 100 with the ALV grid. Remember to include an exit button
Add a change button to the ALV grid toolbar
Create screen 200 the Change screen
The screens:
The code:
   REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
   TYPE-POOLS: icon.
   TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
   CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L   I N T E R N A L   T A B L E S
   *DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
   TYPES: BEGIN OF st_sflight.
           INCLUDE STRUCTURE zsflight.
      Field for traffic light
   TYPES: traffic_light TYPE c.
      Field for line color
   types: line_color(4) type c.
   TYPES: END OF st_sflight.
   TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
   DATA: gi_sflight TYPE tt_sflight.
G L O B A L   D A T A
   DATA: ok_code         LIKE sy-ucomm,
    Work area for internal table
         g_wa_sflight    TYPE st_sflight,
    ALV control: Layout structure
         gs_layout       TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
   DATA:
     go_grid             TYPE REF TO cl_gui_alv_grid,
     go_custom_container TYPE REF TO cl_gui_custom_container,
     o_event_receiver    TYPE REF TO lcl_event_receiver.
   DATA:
Work area for screen 200
     g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
   DATA:
Internal table
     gi_index_rows TYPE lvc_t_row,
Information about 1 row
     g_selected_row LIKE lvc_s_row.
C L A S S E S
   CLASS lcl_event_receiver DEFINITION.
     PUBLIC SECTION.
       METHODS:
        handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING
            e_object e_interactive,
        handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
          IMPORTING e_ucomm.
   ENDCLASS.
      CLASS lcl_event_receiver IMPLEMENTATION
   CLASS lcl_event_receiver IMPLEMENTATION.
     METHOD handle_toolbar.
Event handler method for event toolbar.
       CONSTANTS:
Constants for button type
         c_button_normal           TYPE i VALUE 0,
         c_menu_and_default_button TYPE i VALUE 1,
         c_menu                    TYPE i VALUE 2,
         c_separator               TYPE i VALUE 3,
         c_radio_button            TYPE i VALUE 4,
         c_checkbox                TYPE i VALUE 5,
         c_menu_entry              TYPE i VALUE 6.
       DATA:
           ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
       CLEAR ls_toolbar.
       MOVE c_separator TO ls_toolbar-butn_type..
       APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
       CLEAR ls_toolbar.
       MOVE 'CHANGE'        TO ls_toolbar-function.
       MOVE icon_change    TO ls_toolbar-icon.
       MOVE 'Change flight' TO ls_toolbar-quickinfo.
       MOVE 'Change'        TO ls_toolbar-text.
       MOVE ' '             TO ls_toolbar-disabled.
       APPEND ls_toolbar    TO e_object->mt_toolbar.
     ENDMETHOD.
     METHOD handle_user_command.
Handle own functions defined in the toolbar
       CASE e_ucomm.
         WHEN 'CHANGE'.
           PERFORM change_flight.
       LEAVE TO SCREEN 0.
       ENDCASE.
     ENDMETHOD.
   ENDCLASS.
S T A R T - O F - S E L E C T I O N.
   START-OF-SELECTION.
     SET SCREEN '100'.
   *&      Module USER_COMMAND_0100 INPUT
   MODULE user_command_0100 INPUT.
     CASE ok_code.
       WHEN 'EXIT'.
         LEAVE TO SCREEN 0.
     ENDCASE.
   ENDMODULE.                 " USER_COMMAND_0100 INPUT
   *&      Module STATUS_0100 OUTPUT
   MODULE status_0100 OUTPUT.
     DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
       l_layout TYPE disvariant,
Utillity field
       l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
     DESCRIBE TABLE gi_index_rows LINES l_lines.
     IF l_lines > 0.
       CALL METHOD go_grid->set_selected_rows
           EXPORTING
             it_index_rows = gi_index_rows.
       CALL METHOD cl_gui_cfw=>flush.
       REFRESH gi_index_rows.
     ENDIF.
Read data and create objects
     IF go_custom_container IS INITIAL.
Read data from datbase table
       PERFORM get_data.
Create objects for container and ALV grid
       CREATE OBJECT go_custom_container
         EXPORTING container_name = 'ALV_CONTAINER'.
       CREATE OBJECT go_grid
         EXPORTING
           i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
       CREATE OBJECT o_event_receiver.
       SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
       SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
       l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
       gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
       gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
       gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
       gs_layout-info_fname = 'LINE_COLOR'.
       LOOP AT gi_sflight INTO g_wa_sflight.
         IF g_wa_sflight-paymentsum < 100000.
      Value of traffic light field
           g_wa_sflight-traffic_light = '1'.
      Value of color field:
      C = Color, 6=Color 1=Intesified on, 0: Inverse display off
           g_wa_sflight-line_color    = 'C610'.
         ELSEIF g_wa_sflight-paymentsum => 100000 AND
                g_wa_sflight-paymentsum < 1000000.
           g_wa_sflight-traffic_light = '2'.
         ELSE.
           g_wa_sflight-traffic_light = '3'.
         ENDIF.
         MODIFY gi_sflight FROM g_wa_sflight.
       ENDLOOP.
Grid setup for first display
       CALL METHOD go_grid->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_variant       = l_layout
                   i_save           = 'A'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gi_sflight.
   *-- End of grid setup -
Raise event toolbar to show the modified toolbar
       CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
       CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
     ENDIF.
   ENDMODULE.                 " STATUS_0100 OUTPUT
   *&      Module USER_COMMAND_0200 INPUT
   MODULE user_command_0200 INPUT.
     CASE ok_code.
       WHEN 'EXIT200'.
         LEAVE TO SCREEN 100.
         WHEN'SAVE'.
         PERFORM save_changes.
     ENDCASE.
   ENDMODULE.                 " USER_COMMAND_0200 INPUT
   *&      Form get_data
   FORM get_data.
Read data from table SFLIGHT
     SELECT *
       FROM zsflight
       INTO TABLE gi_sflight.
   ENDFORM.                    " load_data_into_grid
   *&      Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
   FORM change_flight.
     DATA:l_lines TYPE i.
     REFRESH gi_index_rows.
     CLEAR   g_selected_row.
Read index of selected rows
     CALL METHOD go_grid->get_selected_rows
       IMPORTING
         et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
     DESCRIBE TABLE gi_index_rows LINES l_lines.
     IF l_lines = 0.
       CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
            EXPORTING
                 textline1 = 'You must choose a line'.
       EXIT.
     ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
     LOOP AT gi_index_rows INTO g_selected_row.
       IF sy-tabix = 1.
        READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
       ENDIF.
     ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
     CLEAR g_screen200.
     MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
     LEAVE TO SCREEN '200'.
   ENDFORM.                    " change_flight
   *&      Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
   FORM save_changes.
     DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
     MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
     MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
     IF g_wa_sflight-paymentsum < 100000.
       g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
       g_wa_sflight-line_color    = 'C610'.
     ELSEIF g_wa_sflight-paymentsum => 100000 AND
            g_wa_sflight-paymentsum < 1000000.
       g_wa_sflight-traffic_light = '2'.
       clear g_wa_sflight-line_color.
     ELSE.
       g_wa_sflight-traffic_light = '3'.
       clear g_wa_sflight-line_color.
     ENDIF.
     MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
     CALL METHOD go_grid->refresh_table_display.
     CALL METHOD cl_gui_cfw=>flush.
     LEAVE TO SCREEN '100'.
   ENDFORM.                    " save_changes

LabVIEW Run Time Engine and ActiveX Automation Server

Hi,
I have a question related to LabVIEW Run Time Engine and ActiveX Automation Server:
We have a tool developed in LabVIEW and TestStand. End user interface is a LabVIEW GUI (it's an executable) which executes TestStand sequences. Some TestStand sequences call lower level LabVIEW VIs.
Everything works fine with LabVIEW installed, but I was wondering if I could run this tool on deployment machine with only LabVIEW run time engine installed. We are using LabVIEW 6.1 and with only the run time engine installed, I get the error message: "Unable to launch the 'LabVIEW.Application' ActiveX automation server ".
BTW, we are planning to upgrade the versions soon.
Is it possible to make things work only with the run time engine?
Thank you.

Thanks for the response, Brian.
I did upgrade to LabVIEW 8.0 and TestStand 3.5. Everything works fine on the development computer where LabVIEW and TestStand is installed. On the target computer in the lab, I installed LV RTE 8.0 and TestStand 3.5, and now when a VI is called in a sequence file, I get the following:
RunState.PreviousStep.Result.Error.Code -18002
RunState.PreviousStep.Result.Error.Msg "LabVIEW: The VI is not executable"
So, the executable opens and works fine (which means that the LV RTE is installed properly), but when a sequence calls a low level VI, it does not make it through.
comments/suggestions are appreciated. Thanks.

Questions on replication and h/w load balancer

          Why does h/w load balancer have to support passive cookies and inspect them to
          dispatch the request to the primary server first? If we have in-memory replication
          and if h/w loadbalancer just dispatches the http request from the client to any
          of the weblogic servers in the cluster wouldnt this work?
          Is it to pin the session to the creator server to minimize the chance of replication
          misses due to n/w issues, member server slow speed, buffer overwrite etc.
          -Shiraz


Yes, and previous to 6.1 (?) if the request showed up at the wrong server it
          would fail.
          Peace,
          Cameron Purdy
          Tangosol Inc.
          Tangosol Coherence: Clustered Coherent Cache for J2EE
          Information at http://www.tangosol.com/
          "Shiraz Zaidi" <[email protected]> wrote in message
          news:3c15aa10$[email protected]..
          >
          > Why does h/w load balancer have to support passive cookies and inspect
          them to
          > dispatch the request to the primary server first? If we have in-memory
          replication
          > and if h/w loadbalancer just dispatches the http request from the client
          to any
          > of the weblogic servers in the cluster wouldnt this work?
          >
          > Is it to pin the session to the creator server to minimize the chance of
          replication
          > misses due to n/w issues, member server slow speed, buffer overwrite etc.
          >
          > -Shiraz

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

At 60 and totally confused w/version . Not clue with how to use it and how to change it. My question - If a new version of i-tunes can be offered why not the older version as being a choice? Too simple or just impossible to do? I hate to drop i-tunes.

At 60 years of age and totally challenged by todays technology I find it impossible to understand i-tunes Version 11. Don' ask me to try to try go back to a earlier version ( as much as I would like to). I have read some of the advice given, as well as intended as it is, I don't understand the process. I don't want to drop i-tune but I will. I am sure my library is not as large as many others who use it but it is just as important to me. This really saddens me.
I do have two question if some one can help me. First, someone mentioned that if I go to previous restore point this might correct it. Yes or no? Secondly, if Apple can offer us a new version to download why can't they offer an older version to download. Too simple or impossible to do.

You can still drag and drop a song into a Playlist, in the same manner as before. Simply use the left-click of your mouse to select-and-hold the song (left-click-and-hold, don't release the click) and drag it to and then drop it (release the click) into the Playlist you want. (You cannot drop it into a Smart Playlist, you can only drop it into a Regular Playlist.)
... and here's a screenshot dragging the song "Lazy Orbit" into the Regular Playlist "Sat 4th June 2011". A small + symbol also appears in the drag, but it doesn't show up on screenshots. If the move is forbidden, a red slash through a red circle appears instead of the + symbol.
As for the Albums thing; in the Column Browser, right-click anywhere in the Column Browser header (see my screenshots in my previous post) and a menu appears. Deselect Albums on that menu to remove Albums from the upper Columns:
... and for the columns underneath (with the songs list etc.), right-click on that header bar and once again, deselect Albums from the menu that appears. The Albums column will then be removed from the lower columns list.
ed294 wrote:
You would think with all the complaints they are getting they would want us, the buyers, to be satisfied with there product.
Well, my advice to you is: do not think about what you think iTunes cannot do, instead, think about what you want to achieve - and then work out how to achieve it.

Maintenance view: how to read EXTRACT and TOTAL table

Hi, All,
I created a maintenance view, as stated in the documentation, there are 2 internal tables EXTRACT and TOTAL available in running environment. Now I want to read a record from the internal table by using "READ TABLE...."
In my example: the table strucutre has A, B, C 3 fields.
So I tried to use "READ TABLE EXTRACT with key A=' xyz' assigning <fs>", in this case, the syntax check shows error saying that the specified type has no structure and no component can be called.
So how can I search a row in the table EXTRACT and TOTAL by giving a field value? Is there any other way to get data from the table?
Thank you!

Hi Yongying,
I know this is an old post, but, may be this is still helpful for you or for others with the same problem.
Just add the option "CASTING" at the end of your READ statement:
"READ TABLE EXTRACT with key A=' xyz' assigning must be full typed or at least, be of the same type of the Z table from which is generated the itab EXTRACT.
Regards,
José Gabriel.

Difference between free slack and total slack

Hi
I am using MSP professional 2010. I have a doubt in it how can differentiate free slack and total slack.
While scheduling the project total slack is always same as the free slack in Activity. And always 0 at summary task level

Free Slack is the number of days that an activity can have before it starts delaying the next (successor) activity.
Total Slack is the number of days that activity can have before it starts
delaying the whole project.
If you look at the snapshot below ID 4 have Total Slack of 4 days but no Free Slack (as it doesn't have any intermediate Successor other then the last task of the Project which is driving the Project Finish Date) but Total Slack of 4days.
Total Slack of 4d is showing that it has buffer of 4 days before it finally delay the over-all project finish date.
Sapna S

How do you copy and paste automation?

Is there a way to copy and paste automation in logic instead of redrawing the same automation later in the song I asked the same question a few weeks ago and some one replied to go to automation preferences and change the setting move automation with regions to always or ask I did this but this simply just moves the automation with the region if you drag it from its original place I want to copy and paste the region and the have the automation with it hope someone knows what I'm on about cheers
p.s does any know if there is a key board command to turn the cycle mode on/off I looked in the key command preferences but could not find it

Hold down the option key, then drag the region. This will copy the regions AND the automation (as long as you have automation preferences set to move the automation with the region).
Also, there is a hidden feature in Logic, that used to be called the automation folder. t was accessible via a key command in Logic 6, and then they removed that key command in version 7. Why they hid this is beyond me, as it is a very useful thing.
But if you go to your key commands and assign a key command to "Automation Event List", this will open an Event List window showing you the songs automation. Now with that List Window open, hit Apple/1. This opens a new Arrange page, but you'll notice that this new arrange page is showing you all the songs automation data, represented as regions.
From this page, you can then cut and move your automation just like you do audio and MIDI regions.

How to get subtotal and total per project in PS Module cl_gui_alv_grid

Hi all,
i have a requirement of getting Subtotals and totals of few column in the alv grid. as i have already used cl_gui_alv_grid class to display the grid , so what excatly i have to follow to get the values.
i have tried with :
wa_sort    TYPE lvc_s_sort
    wa_sort-spos = '1'.
    wa_sort-fieldname = 'POST1'.
    wa_sort-up = 'X'.
    wa_sort-subtot = 'X'.
    APPEND wa_sort TO t_sort.
    CLEAR: wa_sort.
And in fieldcat have passed X to do_sum field.
and
      CALL METHOD grid1->set_table_for_first_display
     EXPORTING
           is_variant                    = w_variant
           i_save                        = 'A'
           is_layout                     = t_layout
           it_toolbar_excluding          = t_toolbar_excluding
     CHANGING
        it_outtab                        = it_final_1[]
        it_fieldcatalog                  = t_fieldcat
        it_sort                          = t_sort
     EXCEPTIONS
       invalid_parameter_combination     = 1
       program_error                     = 2
       too_many_lines                    = 3
       OTHERS
But i coudnt see any subtotal column and total column in the grid.
please help

But i coudnt see any subtotal column and total column in the grid.
please help
you did every thing correct.
but if you want the subtotals you have to do one more thing.
that is you need to mention the do_sum = 'X'. for the columns which you want to see the subtotals(quantities, currency etcc) in the fieldcatalog.

HR ALE Replication and total automation

Similar Messages

Maybe you are looking for