Hr data transfer in SRM system throgh Idoc

Dear All,
i am trying to send data throgh idoc in sap hr in srm system i am using basic type is HRMD_ABA05 to update somefirlds from t code ppoma , when i am processing idoc my idoc status is green but changes are not gettin reflected also i am unable to see any database update in infotype 0001, will you pls tell me why this is happening and also which is table for infotype 0001.
Many Thanks
Regards
Santosh L

It is important for the user that is creating the IDOC (sending it from the source system) does actually have access to the data. The IDOC will be limited in data, dependant on the users authorisations.

Similar Messages

ERec - Data Transfer from eRec system to HCM System

Hello All,
Currently am able to do the data transfer from eRec system to HCM system but am finding some inconsistencies here.
In our scenario we are on ehp4 and no XI in place, We are doing via RFC only. Stanalone eRec system
So here are few queries and if someone can address these would be really great and appreciate the help
1) While i do the data transfer activity, when i select activity and don not give the Hiring Date in the Org Assignment Column it throws an error "When transferring data using XI, the hiring date must be specified". But am not using XI, then why should it give this error?
Also is it not possible that i do the data transfer without any hiring date?
Also there are two options Planned and Completed. When i do the data transfer i keep it in planned status and do it it automatically saying that Complete
Is this correct
2)Now when i do the data transfer it is getting appeared in HR system when i execute the PA48 tcode.
Here my queries are
a) Suppose i do a data transfer for a candidate Abc on 10.10.2010 and run the PA48 tcode it appears in the list as hire date 10.10.2010
Now as a recruiter am again doing the data transfer for the same candidate Abc for 11.10.2010 and againg when i see PA48 there is again another entry for the Abc candidate for hiring
Is this correct process. How should these duplicate entries to be avoided. Pls help me
3) Also i case if I want additions infotypes to be transferred in PA48 how should we go for this development
Pls help me in these queries

Hi ,
Check the following OSS notes.
1. 1006679
2. 997181 ( Read the attachment in the OSS note ) gives the detailed information regarding EREC and HR)
Let me know if you need more info.
Regards,
Ram

How does IDOC data transfer happensbetween two system?

Hi,
If there are data in system A and I need to transfer to system B using IDoc.
What are the key things which will enable data transfer from system A to system.
It would be great if someone can explain how does IDOC data gets transferred from system A to sytemB.
Regards,
Rachel
Moderator Message : Search for available information or Read SAP documentation. Thread locked
Edited by: Vinod Kumar on Apr 26, 2011 12:37 PM

thanks for all your replies...
let me write down what i have understood ..plz correct me if i have not followed properly..
1) Once IDocs successfully reach R3 , a function module specific to the Idoc type is called "<b>automatically</b>" and updates database...
2) this function module we specify in the process code while creating partner profiles
basically all we need to do is to specify correct function module, right?
the rest of the process ie . updation in the tables(database) is done automatically..
Once database is updated, where can i see the added/updated records in database?
also how do we find this function module?
I am using MATMAS05...
Regards,
Roshani

Product Contract and supplier data transfer from SRM to SAP XI

Dear MDM Guru's
I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
Please help.
Regards
Jacob

HI Jacob,
I believe below documents will give you the information which you are looking.
[SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
[SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
[SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
Please revert if you still get any question, after going though these documents..
- Shiv

Regarding data transfer from SAP system to XI

Hi Experts,
I have a program in which a file of type XSTRING is sent to SAP Business Connector through a Function module. Now we want that file to be transferred to third party system through XI as interface instead of SAP BC.
Can anybody suggest what will be the required steps ?
Also please mention the required things to be done on ABAP part.
Thanks in adv.,
Akash

Hi Gordon,
We don't have the idoc creation part in our program so it will be better if we can use xstring file only.
Can you suggest any function modules for data transfer to XI ?
Thanks,
Akash

Exporting data from R/3 system as IDOCs

As I am working with MDM and not familar with R/3 very much, is there any manual or baisic guidlines how to export master data as IDOCs from R/3 ?
Thank you in advance

Hi Vytas,
to send the data from R3 system to MDM System, you need to follow procedure as mentioned below:
1. you can use the transaction "MDMGX" in R3 system to extract the refrence data to the mdm system via FTP Server.generally this transaction is used to extract the lookup tables data into the repository.
for using this, you can use the option there in transaction MDMGX as "Define repositories and FTP Server" and configure all the required details and you have to install the ftp server on MDM server.then to extract the data, there is a option as "Start Extraction" and your data will be extracted from R3 to MDM inbound port via FTP Server.
for further details about MDMGX, you can refer SAP Note No-964991.
2. to extract the main table data from R3 to MDM, you can use the transaction "MDM_CLNT_EXTR".
for detail info about this transaction, just refer the SAP Note No.-836985, 1035601, 844558.
both transaction will be used for extracting the data from R3 to MDM as per your business requirement.
I hope, this will help you.
any further info, just let me know.
Regards,
Saurabh...
Reward with points if found helpful.

Vendor data transfer from SRM to R/3.

Hi,
I create a Business partner in SRM, I need to transfer it to R/3 ????
Pls advice how to transfer the same.
regds
pavan.

Hi,
Pls see the foll thread for solution/workarounds:
Re: Self registered Bidders to be transferred to ECC
Other related threads:
Tranfer vendor data from SRM to ERP (R3 / ECC)
Vendor replication from SRM to R/3?
External Vendor replication from SRM to R/3
https://forums.sdn.sap.com/click.jspa?searchID=571462&messageID=1487382
Replication of Vendor master from SRM to backend.
BR,
Disha.

Understanding the data transfer from source system to PSA

hi experts,
i an new to BI. i have created a transactional data source for VBAK table and replicated that to BI. Created transformations and info package for uploading the data into PSA. i just want to know the sequence of steps that the system executes when we run the infopackage. i know that it makes a rfc call to source and brings the data back to BI. i want to where that RFC call happens and what is the RFC FM name etc.,. I tried to debug the process using /h, but as you know, it is very difficult to debug the whole standard code. it is very complex. i got lost some where in the middle. if anybody has any idea / or done any research on this ,please share your findings.
thanks

Hi,
Once you click on Start buton in Infopackage,
1. BW system wil send on erequest to ECC along with DataSource details.
2. Based on BW request ECC will respond and it will send message OK and starts extraction.
3. Based on InfoPackage selection the Data will executes in ECC and picks the data in Packets.
4. And ECC will send the data in teh form of Datapackets to BW (Idocs)
5. Once the selection creatiro is over the Job will finish.
6. You can see the data in BW
Thanks
Reddy

Material Master data transfer to external system

Dear All,
We are creating the Interface between SAP and MES system for transfering the material master. The plan is to use the standard Idoc type/message type i.e is MATMAS05.
I have done basic settings like defining parnters, port, partner profile etcc. and trying to trigger the IDoc using transaction code POIM. I am getting a message called " "0 Idocs were generated (According to the selection and filter)". I could not findout why system is throwing this message.
Please help in this issue.
Regards,
Senthilraja

Thanks Uwe,
I tried to create IDoc with BD10 for material master and I am getting two error msg as below.
Msg one
1 master IDocs set up for message type MATMAS
then Msg two
0 communication IDoc(s) generated for message type MATMAS
Is it able to get why this msg is comng and no IDoc's were generated..
Regards,
Senthil

No DSR- data transfer to ABAP- system

Hello,
DSR data were not transferred from J2EE to ABAP- system.
I checked the Note 926590 "- DSR data is not displayed in transaction ST03G" but i can't find any errors
for example:
Service dsr started. (3203 ms). (std_server0.out)
INFO: DSR: Dynamic Library dsrlib.dll (version 24) successfully loaded. (sapccmsr.log)
if i use the testprogram for display DSR- Data i get an error "it is an internal error occurred".
Best regards
Lutz

Hi,
Please go though Note 1090526 - No DSR data in ST03G and STATTRACE - Troubleshooting.
Let me know if it helps.
-roshan

Data transfer b/w SAP to Java using IDOC and Interface SAP Jco

Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector (Version 3.0.5)" we are planning to use. As per our understanding, from Java side one program needs to be written to connect with SAP as "Registered program". This registered program will appear in SAP GATEWAY automatically and using tRFC, TCP/IP connection both SAP and Java system will be connected.
In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
5. Any sample Java program for the SAP Jco version 3.0.5 to create the "Registered program" with SAP..? (e.g. SAP Listener program).?
If anybody has detailed steps or explanation please share it with us.
Thanks in advance
Warm Regards,
VEL

Hi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P

IDOC data transfer SAP to Java using SAP JCo

Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector" we are planning to use. In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
If anybody has detailed steps or explanation please share it with us.
Warm Regards,
VEL

Hi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P

Data transfer from one crm system (Prod) to another crm system ( quality)

Hi,
I have a requirement in which i have to transfer a set of data ( BP, Product, Sales Order etc) for a given date range from production system to Quality system. I am more concerned abt the Business documents which move from CRM to ERP.
I thought of moving those outbond bdocs which are generated in crm system for the passing the data into ERP from Prod to Qty sytem and try to reprocess them as an inbound bdocs in Qty through some program. But i came to know that bdocs will not contain the full data of the business documents which gets created in CRM system. So if i reprocess those bdocs also i will not get the full data of those businesss documents.
Any other alternative is there ?
Regards,
M Khan

Hi,
In the all the data transfer between SAP systems RFC is the best option.
Just create a source system for the new BW system and it will work.
Thanks
Message was edited by:
Ajeet Singh

Data transfer from one BW system to another

As there are, at least theoretically, a myriad of ways to push data from one BW system to another, I was wondering if anyone had some key thoughts or experiences to share. I see that OpenHub/InfoSpoke and the Data Mart Interface / Export DataSources seem to be the main methods of choice.
What are the differences, and what are the key points to consider between these two or other recommended ways (for BW3.5)?
Thanks in advance,
Thomas

Hi,
In the all the data transfer between SAP systems RFC is the best option.
Just create a source system for the new BW system and it will work.
Thanks
Message was edited by:
Ajeet Singh

Data transfers from SRM to R/3

Hi,
i have follwing questions?
1. How date transfer from SRM to R/3?
2. Why PO transfer throught RFC? why not IDoc? and why confirmation and invoices are transfer using IDOC?.
3. config document for EBP-SUS?
Thanks
Rams

Hi Rams,
The data transfers between SRM using ALE (Application Link Enabling) via RFC & IDOCs...
P.O is transferred to R/3 using RFC. Confirmation and invoice through IDOCs.
Since P.O is the leading document and of course legal document, there should not be any duplication. Means if it generates two P.O numbers one in SRM & the other in R/3 they are considered as two different P.Os.And will be an issue during audit.
Where as confirmation and invoice posting documents are internal documents and the docs created in the back end with the back end number range. In this case same number is not mandatory.
Hope this makes you more clear.
Award points for helpful answers.
Rgds,
Teja

Hr data transfer in SRM system throgh Idoc

Similar Messages

Maybe you are looking for