HR enhancement packs ECC 6 with Oracle

Hi There!
I need some assistance to trying to find the EHP's for HR. i have downloaded the EA-HR and SAP HR support packs to level 35 to get it to the right level but i am having difficulties in trying to find the EHPs and EHP support packs. According to note 1061967 I can only get EHP stack 2 becuase for stack 3 the EHP support packs 4 to 7 are not available so i think its pointless getting stack 3.
I need to find the EHP HRSPs which i cannot find them and nor can i find the EHP SPs. I cannot find a oss note that references the location where to find them, i have searched marketplace in every way possible and used Solution Manager Maintenance Optimizer but it cannot find them. Can anyone please help me in trying to find them?
your help is much appreciated.
Thanks,
Mani

use MOPZ, choose old system and select upgrade and it should give option to select EHP's

Similar Messages

ERP 6 Enhancement Pack 2 conflict with Add-on AFS 6.0

I am installing ERP 6 Enhancement Pack 2 in IDES server which ERP 6.0 with add-on AFS 6.0 installed. I ecountered below error on ERP 6 Enhancement Pack 2 conflict with Add-on AFS 6.0 :
Conflicts Between Add-On P3A V600 and other components
Component
Release
Add-On Piece List
Information on
Conflict Resolution
SAP_APPL
602
SAPK-602DDINSAPAPPL
Unresolvable
SAPK-602DFINSAPAPPL
Unresolvable
SAPK-602DOINSAPAPPL
Unresolvable
SAPK-602DRINSAPAPPL
Unresolvable
SAPK-602DWINSAPAPPL
Unresolvable
SAPK-602DZINSAPAPPL
Unresolvable
Pls advise.
Thanks.
Edward

Hi Edward,
in the Master Guides on http://service.sap.com/erp-inst, we recommend that you check the Add-On compatibity prior to installing the enhancement package. For Add-Ons you might need for instance separate "Conflict Resolutions", and should make sure that these are available. You contact the owner of this Add-On to find out more.
If this topic is solved for an Add-On, but the issue still persists, it might be a support topic.
(An Add-On in this sense is anything which you install in addition to the Standard SAP ERP. As the enhancement packages alter SAP ERP, the add-on might need to react. For SAP Add-Ons, this is done with conflict resolution transports)
regards,
Andreas R

Insyall Enhance Pack 4 along with ERP 6.0?

Hi,
I need to build new ERP 6.0 system with enhancement package 4.
Is it possible to install EHP4 along with ERP 6.0 installation?
Thanks,
Ram

Hi,
Basically there are two steps for the installation:
1. Installation of SAP ERP 6.0 (including SAP EHP 1 for SAP NW 7.0)
2. Installation of selected parts of Enhancement Package 4 for SAP ERP 6.0
So, the first step is to use sapinst to install the ERP 6.0 with NW 7.01 (the BASIS part)
Then the second step is to use the sapehpi to install the EHP4 for ERP 6.0 (the application part)
Read the master guide and installation documents at
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000082027&_SCENARIO=01100035870000000202&

EM Packs with Oracle Standard Edition

Hi,
1) Enterprise Manager Packs like Diagnostic, Tuning, Change and Configuration Management Pack can be licensed only with Oracle Enteprise Edition (according to sales people)
2) I can manage Oracle EE and SE databases with Grid Control 10g (from technical perspective)
3) With Database Control or Grid Control i can use the EM packs features with EE and SE (from technical perspective)
Questions:
1) Does anybody know what is the way to license EM packs to use with Oracle SE?
2) For example if i have one Oracle EE and 3 Oracle SE in my shop: Does anybody know if i can license EM packs with my Oracle EE and use them with my 3 Oracle SE?
I know that they are sales questions but maybe someone has an answer.
Thank you

You are right these are sales questions and I'm not a sales representative, so I can't give you an official and legally binding answer.
1) Technically spoken (you are again right) in many cases it's possible to use much more features than licensed.
But If you have SE and you want to use the EM management packs you have to contact your Oracle sales person to buy the proper licences.You do this in the same manner as you would do for any basic software.
2) If you have an 'out-of-the-box' licence agreement this is not possible, you cannot mix EE and SE licences. But talk to your sales representative, Oracle has more different licence flavours than one can imagine. I think it's possible to reach an agreement,which fits your needs.
Werner

BizTalk 2010 wcf-oracledb adapter with Oracle Database 12c

Hi,
My customer is currently running BizTalk 2010 adapter pack wcf-oracledb with Oracle 11g.
They want to upgrade the oracle database to 12c.
Is it possible to use BizTalk 2010 wcf-oracledb adapter with Oracle 12c?
Thank you.
br, Johan

Hi,
No it is not supported.
For the Oracle Database Adapter
Supported server versions: Oracle database version 11.1, Oracle database version 10.2, Oracle database version 10.1, Oracle database version 9.2
Supported client versions: Oracle Data Access Components for Oracle Client 11.1.0.6 with Patch Set 11.1.0.7, Oracle Data Access Components for Oracle Client 11.1.0.7
Refer:
Microsoft BizTalk Adapter Pack 2010 Documentation
Rachit
Please mark as answer or vote as helpful if my reply does

SRM 7. 0 with ECC 6.0 Enhancement Pack

1) My client just upgraded their R/3 to ECC 6.0, but no Enhancement Pack.
2) They are trying to upgrade from SRM 5.0 to SRM 7.0 in the near futures.
3) During their first SRM phase, their scenario is limited to the following:
a. R/3 RFQs are pushed to SRM via RFC call (custom program)
b. SRM vendor logs in to see the RFQs and creates Quote
c. SRM buyer evaluates the quotes
4) Question: In order to run the above mentioned scenario without issues, is Enhancement Pack 4 a mandatory component for them, or can ECC 6.0 without any EnH support it already? If it's mandatory, which sub-components of the EnH 4 must be activated in order to support the scenario?
5) Question: In their next SRM phase, they are trying to run scenarios like PPS and Doc Builder. In that case, is Enhancement Pack 4 a mandatory component?
6) Last: Is there any SAP official documentation that maybe answers the question that I listed above?
Thanks.

Hello Jay,
Please find the upgrade information:
https://websmp206.sap-ag.de/upgrade-srm
EhP4 is not mandatory for strategic sourcing, data transfer via RFC can be used.
The benefit with EhP4 for your scenario will be new feature of "Collective Processing of purchase requistion" CPPR; where buyer can select the PReq line items on the portal & create RFx directly in the SRM system. All data transfer is via PI in this scenario. Creating a RFQ in ECC is not a good idea, when you can leverage the RFx capabilities of SRM.
New features: Blog:
/people/michael.jud/blog/2008/09/10/srm-70-in-the-business-suite
Official information :
http://service.sap.com/srm click on SRM 7.0 external view
Hope this solves.
Thanks
Ashutosh

GTS 8.0 with ECC Enhancment Pack 4 SP2

Hello-
We've recently upgraded our ECC system to Enhancement Pack 4, SP2. We'd like to install GTS 8.0, however I'm unable to find the requirements for GTS 8.0 in enhancement pack terms. I'm only able to find that it requires SPS16, which I'm not able to find any comparisions relating SPS16 to Ehp4 SP2 to see how they stack up.
Basically, can anybody find or refer me to material for GTS requirements in terms after Enhancement Pack 4? Or a note that compares SPS to EhP versions?
Thanks in advance!!
Jeff

Hi Jeff,
SAP note 1266777 provides the information on installation of GTS on ECC with Enhancement Pack.
Best regards,
Howard

Enhancement Pack 2 for ESS for ECC 6.0

Can anyone provide me with document on the new functionality of Enhancement Pack 2 impact on ESS for ECC 6.0?
Or where I can find this documentation?
What areas of ESS & MSS does it cover?
Thanks
WB

Thanks Chris
Still confused.
Are you able to tell me what is the latest enhancement pack for ESS, the reason for asking is that I'm looking for more details on the new iViews as contained in Note 1048386 see below
Thanks
WB
In the previous ESS Business Package (BP) version, the links for starting processes were provided in the workset Life and Work Events. With EhP2, the links for starting the processes are provided in the workset that the process belongs to thematically (for example, the process 'Change of Working Time' is provided in the workset 'Working Time'). The following list provides an overview over the processes available in the standard system and the worksets they are assigned to.
Benefits and Payment
o Company Loans
o Membership Fees Sports Club
o Status Overview
Working Time
o Change of Working Time
o Status Overview
Own Data
o Change of Address
o Personnel File
o Status Overview
Life and Work Events
o Maternity Leave
o Birth of a Child
o Termination
o Status Overview
The available processes are integrated in the navigation of the ESS Homepage Framework.

Security Guide for Enhancement Pack 4 for ECC 6.0

Hello,
I am trying to analyse the impact of applying Enhancement pack 4 for ECC 6.0, Can someone help me find any security guides for it.
It is an existing system and few additional modules are being implemented.
Kind Regards.

Hello,
We have applied EHP4 on an exisiting(running) ECC 6.0 System. Can someone help me find answers to below queries
a) What is the SAP standard process to start with Security bit.
b) Do we need to run SU25 steps. If yes, which one of them.
c) Since the purpose of applying EHP4 was to activate few set of new business functionalities, we intend to affect the existing security design at the minimal. What is the best approach for this.
Kind Regards,
Abdul

Impact of enhancement pack 3 on ECC

Hi,
can you please explain what are the impacts of enhancement Pack 3 on the SAP ECC server, and how if we migrate to EHP-3.
thanks
Regards
SR

Syed,
The question you have asked is more from a technical point of view...I'll put this into a laymen language
let's say..your organization is currently running on IS Oil and wants to use certain feature of IS Health Care or IS Media...so instead of installing the whole package, only that part will be activated; now if that feature can be met by say installing EhP3...the Basis guy needs to ensure that he has install and fulfill the technical requirements first..then only from the functional side you will be able to activate and use the feature.
one note of caution: Once activated, you can not switch off this functionality
SAP Notes are there with all the information and the prerequisites for installation.
You can check that on [www.service.sap.com|www.service.sap.com]
Regards,
N

GUIxt with Enhancement Pack 5

We are in ECC 6 and are in the process of updating to enhancement pack 5. We are having to make changes to the guixt scripts due to changes in screen names, etc. One issue I am having is with TIP. It does not seem to work properly. It is a customer screen and the script is getting activated, but the tip icon does not appear and it overwrites the field description with the tip information. Anyone have any idea.
The syntax for the tip is
Tip F[%#AUTOTEXT002] "Format: Employee # + dash + password i.e 9999-ABCDE"
the field name is correct and the 'format employee #... shows up, just not as a tip.
Any help is welcome.

Hi,
Don't know if this issue is resolved but in case it is not:
Tip [Name of your element] "Format: Employee # + dash + password i.e 9999-ABCDE"
Good luck

Performance Issue with RF Scanners after SAP Enhancement Pack 5 Upgrade

We are on component version SAP ECC 6.0, and recently upgraded to Enhancement Pack 5. I believe we are on Net Weaver 7.10, and using RF scanners in one plant that is Warehouse Managed. Evidentially when we moved to EHP5, the Web SAP Console went away and we are left with ITS Mobile. This has created several issues and continues to be a performance barrier for the forklift drivers in the warehouse. We see there is a high use of java script, and the processors canu2019t handle this. When we login to tcode LM00, on a laptop or desktop computer, there are no performance issues. When we login to tcode LM00, with the RF scanners, the system is very slow. It might take 30 seconds to confirm one item on a WM Transfer Order.
1.) Can we revert back to Web SAP Console, after we have upgraded to EHP5?
2.) What is creating the performance issues with the RF Scanners now that we switched over to SAP ITS mobile?
Our RF Scanners are made by Intermec, but I donu2019t think that is where the solution lies. One person in our IT Operations has spent a good deal of time configuring SAPITS to get it to work, but still it isnu2019t performing.

Tom,
I am sorry I did not see this earlier.
I'm currently working on a very similar project with ITS mobile and the problem is to accurately determine the root cause of the problem in the least amount of time. The tool that works is found here: http://www.connectrf.com/index.php/mcm/managed-diagnostics/
Isolating the network from the application and the device is a time consuming process unless you have a piece of software that can trace the HTTP transaction between host and device on both wired and wireless side of the network. Once that is achieved (as with Connect's tool) you can then you can begin to solve the problem.
What I found in my project is that the amount of data traffic generated by ITS mobile can be reduced drastically, which speeds the response time of the mobile devices, especially with large number of devices in distribution centers.
Let me know if I can answer more questions related to this topic.
Cheers,
Shari

Import ABAP error during ECC 6.0 installation on Win2003 with Oracle

Dear friends,
I am trying to install ECC 6.0 IDES version on Windows 2003 server with oracle 10g. In fact I had tried few days before and I was getting the same error message. I had posted a separate thread for this and after few suggestions I have moved the sorce data to internald HDD which was earlier on external HDD. Secondly the page file only 4096MB and now I have changed it to 24GB. But still it is giving errors. Only thing is that I have changed the page file size after istalling Oracle, will this effect installation? or is this because of any files corrupted source HDD?
Kindly help me to solve this problem. I would be very much thankful to you. Here I am attaching DOKCLU.log; PCL2.log; sapinst.log; and import_monitor.java.log.
Please let me know if you need any further information.
- Ravinder.
============================================
Error log from DOKCLU.log is as below:
++++++++++++++++++++++++++++++
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Apr 2 2006 23:26:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -l DOKCLU.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: DOKCLU created #20101202103735
(RFF) ERROR: invalid checksum in data file "D:\SAPDVD\IDES-Exp 2\EXP2\DATA\DOKCLU.001"
current table was "DOKCLU"
(DB) INFO: disconnected from DB
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
============================================
Error log from PCL2.log
+++++++++++++++++
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Apr 2 2006 23:26:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i PCL2.cmd -dbcodepage 4103 -l PCL2.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: PCL2 created #20101202103740
(RFF) ERROR: invalid checksum in data file "D:\SAPDVD\IDES-Exp 2\EXP2\DATA\PCL2.001"
current table was "PCL2"
(DB) INFO: disconnected from DB
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
============================================
log from import_monitor.java.log
+++++++++++++++++++++++
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 1, waiting 2, completed 40, failed 16, total 59.
Import Monitor jobs: running 2, waiting 1, completed 40, failed 16, total 59.
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 41, failed 16, total 59.
Loading of 'SAPAPPL0_10' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 42, failed 16, total 59.
============================================
log from sapinst.log
+++++++++++++++
Import Monitor jobs: running 2, waiting 9, completed 32, failed 16, total 59.
Import Monitor jobs: running 3, waiting 8, completed 32, failed 16, total 59.
Loading of 'SAPSSEXC_1' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 33, failed 16, total 59.
Import Monitor jobs: running 3, waiting 7, completed 33, failed 16, total 59.
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running ...
ERROR 2010-12-03 05:43:19
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-12-03 05:43:19
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .

Hi Rahul,
Thanks for your valuable inputs, but when tried giving the below sqlplus command it is asking for user name and password and there I got stuck. Could you please let me know what is the default user and password or is there anyway we can skip it?
Resolution
stop the all oracle services.all r automatic mode.
restart the system
==> When we restart system again all the automatic oracle services starts right, do we need to stop them again before executing the below command?
login through
goto command promt and type
sqlplus "/as sysdba"
==> after this command it is asking for user name and password
sql> startup
exit
c:---->lsnrctl (I do not understand this command, is it at C prompt or at SQL prompt?
lsnrctl>status (also do not understand how to give this command)
(look for the following message)
The command completed successfully
exit
now u start the installation.
Kindly help, it would be great if you could me your contact details, I will not disturb you but just in case of any help. Thanks once again. - Ravi.

How to Check Enhancement Pack of ECC system

Hi Experts,
I want to check enhancement pack of My SAP R/3 ECC 6.0 system.
Where can i find this information can you please help.
In System --> Status --> in component version i can see "SAP ECC 6.0".
On click of the button provided below this component version , i can see following details:
SAP_ABA             700                     0011     SAPKA70011     Cross-Application Component
SAP_BASIS     700                     0011     SAPKB70011     SAP Basis Component
ST-PI             2005_1_700     0005     SAPKITLQI5     SAP Solution Tools Plug-In
PI_BASIS             2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
SAP_BW             700                     0011     SAPKW70011     SAP NetWeaver BI 7.0
SAP_AP             700                     0007     SAPKNA7007     SAP Application Platform
LCAPPS     2005_700                     0003     SAPKIBHD03     LC Applications (LCAPPS) 2005_700
SAP_APPL     600                     0006     SAPKH60006     Logistics and Accounting
from this information can you please help me identify my SAp R/3 ECC 6.0 system's enhancement pack version?
Regards,
Ashish Shah

SAP_APPL 600 No EHP
SAP_APPL 601 EHP1
SAP_APPL 602 EHP2
SAP_APPL 603 EHP3
SAP_APPL 604 EHP4
SAP_APPL 605 EHP5
SAP_APPL 616 EHP6
SAP_APPL 617 EHP7
Sorry if i am wrong....thats how i find it...i am an ABAPer.
Regards,
Vishnu

ECC 6.0 Enhancement Pack 5 upgrade phase ADJUSTCHK faillure

When I run the Enhancement Pack Installation, I get a hard failure at the MAIN_SHDCRE/ADJUSTCHK phase. The error message says "No lines found in logfile matching "UMODPRO\.INX". The log follows...
1 ETQ201 Entering upgrade-phase "ADJUSTCHK" ("20111006131443")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_SHDCRE/ADJUSTCHK'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'SAP_MOD_EHP'
2 ETQ399 Arg[1] = 'ADJUSTCK.ELG'
2 ETQ399 Arg[2] = 'ADJUSTMT.INF'
4 ETQ010 Date & Time: 20111006131443
4 ETQ265 Starting report "RSUMOD01" with variant "SAP_MOD_EHP" in batch
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RSUMOD01" with job count "13144400" scheduled
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20111006131819
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ248 Missing log file(s) of report "RSUMOD01", matching "UMODPROT\.INX"
What does this mean?
Is the backslash supposed to be in the name UMODPROT.INX?

Hi,
Please check in SM37 if there is any job failure in the system. And also check if there is any dump.
Thanks
Sunny

HR enhancement packs ECC 6 with Oracle

Similar Messages

Maybe you are looking for