HR & FINANCE why we are not usning into LO

Hi All.........
i have one doubt about LO.
that is we are using all applications exept HR & FINANCE.
why?
can you please clarify this doubt.
Thanks,
Chal

Hi chalapathi,
In Lo we are useing many Application Except FI and some datasources
which datasource support Delta it will maintaing LO Extr which is in LBWE
rest of datasource does't sopport delat
Regards,
Malli

Similar Messages

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

Billing document are not flowing into FI and COPA

Hello SAP CO gurus,
please help me out by giving possible reasons why Billing document are not flowing into FI and COPA.
what are the settings need to check?
is there any option to get release by manual?
Initiatives rewards with points........
Regards
Chandra.

Hello Chandra,
Check whether any standard cost estimate is existing for that material for which your billing. If it is there then check whether costing key from COPA is able to access the cost estimate.
I am also working on the same issue but not solved yet.
regards
Nivas

"An error occurred during activation. Try again." Why can I not sign into imessage?

"An error occurred during activation. Try again." Why can I not sign into Imessage?

Hi,
You stated earlier that you had already deleted the "madrid" .plist with no effect.
Can I check you did this with the app closed down or at least restarted the app straight afterwards ?
If you did that close the app if open and access the ~/Library/Preferences folder again.
This time delete com.apple.imessage.bag.plist
This item stores the Apple server used for your Login to the iMessages server and contains a date/time reference.
Restarting the app after deleting this file will make it reconnect with the iMessages servers in a fresh manner which my solve things.
It may sort out any date/time issues with the stored date.
Messages is one of the app that Apple have "Sandboxed".
This means that some of it's operations are held away from other apps to prevent one app bringing down several others.
This is turn means that the route or path used by the app to Read and Write to the various .plists is different to the direct placing in ~/Library/Preferences.
The Path is ~/Library/Containers/com.apple.iChat/Data/Library/Preferences
Mostly the items in here are then Aliases that point to the actual originals in ~/Library/Preferences. However there are exceptions.
You can copy and paste the Path above in to the Finder > Go Menu > Go to Folder dialogue box to access this folder.
Once there use the Finder's View Menu > Show Path Bar.
This adds a collection of folders across the bottom of the Finder window.
Right click on the Preferences folder at the right hand list of the Path.
Chose the Get Info option.
In the Info panel scroll to the Bottom.
Your Shortname should appear (with (Me) as well) and you should have Read and Write Permissions
If you highlight this and then use the Cogwheel type iCon it should reveal you shortname again but in Greyed out form which mean you Own the File/folder
Repeat this for each containing folder until the Library item on the left (you don't need to do the Little House icon one)
You should have Read an Write Permissions and Own all of them.
Can you confirm this ?
8:04 pm Sunday; June 15, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT1212 I just did the update and this phone is one week old. Why can I not get into it now

I just did the update and this phone is one week old. Why can I not get into it now

The passcode is the answer to the prompt "Enter Passcode" that you are very likely seeing.
If not, you need to help us by telling us the exact symptoms of what you are seeing.

Agile plm forum please or reply as to why you are not going to have one.

agile plm forum please or reply as to why you are not going to have one.

I also replied to your other posting. I am a product manager on the Agile team. At this time, we are using the Support Communities page as a discussion forum rather than the OTN discussion forums. Please repost into the Support (Metalink) Communities area.
Other options include the Yahoo group WRAU and reviewing the PLM blog at http://blogs.oracle.com/PLM.
Thanks.

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna

How can I fix this? Text and images collide, space and margins are not taking into account. The whole page layout is a mess.

Hi,
Whatever I design in muse is totally different from what the preview in the browser shows. Texts crashed with images, and spaces and margins are not taken into account,
Is there a way to fix this? Is it a bug?
Thanks.

Hi Federico,
Please take a look at this forum post for a similar discussion : Aligning multiple HTML objects on one page?
Regards,
Aish

When I sort bookmarks in "organize bookmarks" they are not sorted under the bookmarks pulldown menu. Latest additions are not integrated into the sort

When I sort bookmarks in "Organize Bookmarks" they are not sorted under the pulldown menu on a regular page. Recently added bookmarks are not inegrated into to sorting.

See this:
[https://support.mozilla.com/en-US/kb/Sorting+bookmarks#Sorting_by_name]

Tax and pricing info are not flowing into Idoc orders02-eledp04 and 05

Hi,
We are carrying out SRM5.5 -SUS and ECC6.0 Integration using PI 7.
We are configuring for the MM-SUS Scenario.
Now,to accomodate the Tax / Pricing we have installed the add on
component LOCINSUS and we are having doubts on how to use it:
1) Tax and pricing information are not flowing into IDOC- orders02
(e1edp04 and e1edp05 segments are not present in the created IDOC). The
condition print indicator in checked on ECC System and we have also
implemented SAP note 995986.
2)In create ASN transaction , we are not able to see the Excise Invoice
Number and Date field in Basic data tab as expected from SAP Library
document although we have installed the Localization Add on component.
Please help us to reso1ve these issues,
Regards,
Mani
099890-22217.

Mani,
Did you resolve this issue, because we are having the same issue in ECC6 with IDoc ORDERS02.
If you did resolve this issue could you please let us know how, much appreciated.
Bill.

Customer receipts and payments are not flowing into PS module

Dear Team,
I am new to the PS module..... Customer receipts and payments are not flowing into PS module. Kindly let me know the missing configuration steps.
Thanks !!!

Sagar Kapadia wrote:
> 1) What is the pre-requisite configuration for activation of Commitments and Project Cash management in the PS system?
> 2) Is there any word of caution which needs to be kept in mind at the time of activation?
> 3) once activated, what will the impact on the data? Are there any chances of data inconsistency?
>
Only one pre-requisite is the creation of FM area.
As I suggested earlier, please read SAP help which will answer all your queries.
Please follow the below path...
SAP Help Portal >>> SAP ERP Central Component >>> Financials >>> Project System >>> Payments >>> Project Cash Management.

Material delta changes are not flowing into CRM

Dear All,
material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
Do I need to create the new product hierarchy also in CRM manually?
Appreciate any inputs
Raj

Hi Raj,
Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
Then go to SMW01 and reprosess the struck Bdoc.
Reward points if helps,
Regards,
Paul Kondaveeti

Revenue values are not flowing into COPA

Dear Experts,
We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
May I know the exact reasonu2026.
Please suggest me in right wayu2026.
Regards,
Balaji Bhonsle.

Hi Balaji bhau
I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
See if the Billing Type has been entered in KE4W and the VF reset for it
Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
br, Ajay M

Why exceptions are not using in BAPI

Hi,
I would like to know why exceptions are not using in STANDARD bapi.Is there any reason for this.
Please explain me clearly
Thanks in advance
Thanks and Regards,
Venkat

Hi,
If the exception is being handled by the caller, meaning that the exception is listed in the EXCEPTIONS section of the
funciton call, then the program will handle it gracefully and continue processing,if it is not in this section of the
funciton call, and it is raised inside the funciton module,
it will issue an ABAP dump and end. This is true for
foreground processing as well as background processing.
https://forums.sdn.sap.com/click.jspa?searchID=12141509&messageID=5433799
Regards
Kiran Sure

HR & FINANCE why we are not usning into LO

Similar Messages

Maybe you are looking for