HR forms character format

Hi,
How we will make a field Bolder in HR forms. Tcode PE51.
Regards,
Karthik.k

Hi,
It is not possible to make a Field Bold in PE51 (HR Forms).
All the fields printed normally.
Regards,
Anji

Similar Messages

Protection of character format in Smart Forms

Dear All,
Similar to the "protected" option in SAP Script for Character format, please let me know "how to protect a character format in Smart forms?"
Regards,
Anand

Hi,
By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
Also, chck the following link:
Page-protection option disabled in Folder node for Smartform
Let me know in case you need further assistance!
Thanks,
Varna

SAP Standard Text (SO10) Character format in Adobe forms

Hi Friends
I created a standradrd text using 'S010' with Few character formats like 'bold' and 'italic' but when created 'Inlude text' element in adobe forms i could see only text coming in pdf output but not the formatting. Is there any way i could get the text character formatting also from standard text to adobe?. I appreciate your help.
Thanks

Total Posts: 534
Total Questions: 183 (4 unresolved)
Forum Points: 0
You ask a lot, but never helped a living soul. Why would anybody help you/ do your job?
By the way the same question was asked a zillion times, so if you would care to search you would not receive this comment.
Otto

Reg paragraph formant and character format

Hi All,
How to assign particular paragraph formant and character formant for a particular text node that I have created.I know how to create paragraph formats and characters using smartstyles and also I assigned this smartstyle in my smartform to that particular text node,but I am not getting where do I select the paragraph format and character format to assign it to the text node?could you please suggest some body how to do this?
Regards
Mahesh

Select the text you have written in the created text element and on top of the text only there is an option for Paragraph and character formats which will give you the dropdown list with all the paragraphs and character formats u have created. choose the desired one and it will reflect..
OR alternately you can go to the editor and wite the code as in SAP SCRIPTS by providing the Paragraph name or Character name urself.
REWARD POINTS IF USEFUL

Character format on include text in smart form ??

hello,
i want to apply a character format on my include text, as we do on text elements .. how to apply it on include text ??
thanks..

Hey dude ,
Just go to the <b>output option</b> of the text and include the smartstyle, where you have mentioned the required charecter format. Before doing this you should have activated your smartstyle .
Your problem will be solved.
Regards,
Kunal.

How can I get a list of SAPScipt character formats?

I know that SAPScript use the <> for capturing - i.e. preceed text and fields with <NN> and end with </> to change the format.
For example <B> is for bold.
i want to know where i can get a list of all the possbile values - have looked thru SDN and the Web with no success on this.
I used to know this but it have been many years since used sapscript.
Thanks

Hi
I am not sure that I have understood your question correctly.
But if you want to see all the character formats available inside the form in SE71, there is a push button named "Character Format". Press that button and you would see all the character formats available for the form.
Raveesh

Edit an Existing Character format

Hi,
I have a pblm to solve.
In so10 transaction I have <text name> which is of text id PALT and I want to change a character format in that.Please help me.
point will rewarded for useful answers.
Thanks.
regards,
Arul

Hi
Open the standard text in SO10.
FORMAT -
> Change Style
FORMAT -
> Change form
You can use/change paragraph and character formats which are there in the attached style/form.
Regards,
Raj

Dynamic character format in SMARTFORMS

Dear Gurus,
I want to make a dynamic character format in smartforms. I did it in SAPscript and success.
what I did in program before passing to smartform :
d_note = '<XX> dynamic text </>'
and pass it to SAPscript and smartforms :
&d_note&
in SAPscript I made new character format XX as BOLD and UNDERLINED. it works for SAPscript. the output become = dynamic txt
unfortunately when I do this in smartforms, it is a fail although I have set new character format XX as bold and underline in smartstyles. the output become = <XX> dynamic text </>
any guru has a solution for this smartform?

Hi Sendy,
You cant use tags (eg- <XX>) in smartfomrs like you did in sap scripts. Use your style in the smartform( form attributes) with all character formats and paragraph formats which you need. When you create a new text module in the smartform you will get two drop down lists for the paragraph formats and character formats in the top of the editor. Type your text there and highlight then choose 'XX'(or any other character format) character format from the drop down list.
Hope this would help.
Cheers,
Jeewana

Clarification on character format in scripts

Hi
i have a standard from name j_1a_F007_cd_mem. in this form in the main window there is a statement like this <bd>j_1ai02_barcode in the third line. but in this form this <bd> character format has not declared any one. im surprising how this is working with out declaring. can any one please clarify this one how this is working. whether this character format is calling from some where.
Thanks in advance.
Rahul.

hi,
U will find the Char format <BD> in char fomats along with Barcode format.
if u don't find them there then reimport the script from client 000 and see.
You can the find that in the Character formats radio button and there itself you can see the barcode option.
reward if helpful
regards,
sravanthi

SmartForms Character Formats, Fonts, and Sizes?

Does anyone have any good documentation, links, or suggestions related to character formats, fonts, and sizes we can use in SmartForms? My biggest challenges are trying to decide which fonts and their sizes to use in my windows.
For instance, what are good small, or medium, or large, font types to use under different scenarios, and what suggested sizes should be used with them? It would be nice to have some kind of a tip sheet that would refer to this. Because I spend more time playing with configuration then I do actually coding.
Open to all or any suggestions. Thank-You.

hi,
please check in these link
SmartForms & Smartstyles
Re: SAP Smart Forms
hope this will help u..
pradeep
Edited by: pradeep kandgal on Jan 6, 2009 3:24 PM

Creating a Character Format

Hai,
I am unable to create a new Character format in Scripts(se71)
in english language.
The script is copied from client 00.
Would any one help me.
Regards,
Swetha Singh

Swetha,
Can you breif it up, What is the error u are getting?
Any how the process is like this
For copying or modifying a standard script,
copy the standard form using client 000
go for utilities >copy from client > give form name and target form name
now give the name of the modified form in se71 and go for change, with language en.
Go for Character formats -> go to standard attributes > give the character format -> asks for a pop-up with create new character element ->give the meaning -> save it.
Let me know is the same process u are using.
If u still feel not able to do revert with the process u had used
reward points
regards
shailendra

Character Formats showing up in TOC

TOC entries for, say, "Heading4", are nominally controlled by the paragraph format of the generated "Heading4TOC" format.
Sometimes the body narrative will have local mods to the Heading4 text. Depending on what you're doing, you may want those mods to show up in the TOC, or you may not. In my case, I did not, and was surprised to see a TOC entry show up in color.
It turns out that if you apply a Character Format to text used for TOC (and perhaps IX, LOF etc) generation, that ChrFmt is retained when rendering the TOC.
So if you want the local enhancement to appear in the TOC, use Chr Fmt. I verified this by setting a heading word to Character Format "Symbol" (which applies the Symbol font`, all else As-Is). The TOC entry had that word in Symbol glyphs.
if you don't want the local enhancement to appear in the TOC, use local overrides. I verified this by just doing a Format > Font > Symbol on the same word of the heading. The TOC entry had that word in roman.
In my case, I have a table imported (as EPS) from a spreadsheet. I want the table title to appear in TOC, but of course Frame can't "see" that text. So the anchor line is that title in Heading4, which does appear in TOC. This particularly H4 has a local color override that is set invisible via Color Views. I want the TOC entry to be visible, but the Heading4 text in the body to be invisible. This works if the Heading4 has the invisible color applied with the graphics tools. It doesn't work if I use an invisible text Character Format.
Another way to hack this particular problem is to put the Heading4 title in a text frame behind the imported image. Then it requires no character formatting magic. But you can't see it during edit, and you need to hope that the table white fills really are, and aren't just transparent.

The TOC will only reproduce the character format of the heading if it has that character format in its catalogue.
Thanks for contributing that. It stands to reason that if TOC gen is honoring and replicationg the ChFmt, the easiest way to implement that is just to drag the format in with the text being cloned.
Building on this, you can control the appearance of the TOC entry by defining the character format – if you wish, differently from how it is defined in the main text. So your Heading 4 override may be coloured white in the main text, but black in the TOC.
Thanks again. I'm going to use this starting now, since the present manual set has need of it.
The key aspects of the implementation:
The ChFmt name needs to be something very self-evident to future document stewards, like "Hide_Except_TOC".
In all .fm files except TOC, its definition is
all As-Is, except for Color,
which is an existing author-use-only color "Invisible Text" already set Invisible by Color Views during render.
In the TOC file, the definition of "Hide_Except_TOC" is
100% As-Is.
(first time I've ever defined a format like that)

Problem with paragraph style overrides and character formatting

I've had this problem for a long time, and sometimes it resolves itself, sometimes it doesn't. Finally I'm begging for help.
I am typesetting academic articles into a journal. We use endnotes. The endnotes have both italic and regular formatting--italics for book and journal titles, and foreign phrases.
Sometimes when I place the text, the formatting reverts to whatever it was in Word. To try to fix that, I've begun stripping the Word formatting from the original document, making everything "Courier New" and just importing it like that. I figured this would clear a lot of the problems I've had with fiddly formatting issues.
I was mistaken.
Here is what happens:
When I place the document it comes up in the original Courier New font, with italics and other formatting intact. If I click "article style" which is the main article paragraph style format, normally it changes. but if I right click and select "apply article style" it is more likely to change the paragraph to the proper style, with italics and other formatting still intact.
But when it gets to endnotes, I'm sort of screwed.
My endnotes style is a bulletted style, so that I can have the endnote numbers consistent. but this seems to screw all the style formatting.
Here is what I do:
With the cursor in endnote text, I click "bulleted endnote style". The character format remains the same, with a + beside the style. The endnote number format is different, however. If I click "clear overrides" it does in fact change to the proper formatting, but it strips any italics or other character in the text. This is frustrating because many of these endnotes have lots of italicized journal and book titles, and it takes a long time to figure out which ones I need to reitalicize manually.
I have tried to use the "customize style import>Style mapping" but it has not fixed anything.
Please help me figure out how to make these transitions more smoothly. I am open to suggestions both on how to make the changes once the document is placed in the Indesign file, and also making modifications to formats in the native Word file so that I don't have these problems.
Thanks
Dan

Sorry, that last message wasn't supposed to send (if that's not obvious!). I was writing it and got interrupted. Damn iphone.
I know why there are two numbers. This is not an issue. What I didn't finish writing was that, the note number before i bullet it is a different font/ format. Again, not a problem. Here is something interesting, though. If I delete that original number by placing the cursor in the middle of it (say a between the 4 and 2 of 42) then delete everything by Shift+arrow forward, press delete then delete the rest of the unnecessary characters, THEN apply the style formatting, it works just fine. Is it something to do with the character codes of those original note numbers?
Word drops in so many hidden codes that it screws everything up!

Issue with character formats using duplex printing in smartform

Hi all,
I am getting a problem with character formats using duplex printing in smartform. I am using a text module with a bold character to display text in a window. The problem is that on the first back page,the text is being printed normally (without bold), but on the next pages, the back pages are being printed with the bold character format.
Can anyone know where is the problem..please.
Points to be rewarded..
Thanks.
Regards,
Zaheed.

Hi Zaheed,
Normally this should not happen.. and also there is no internal formatting done by SAP.. it will show based on what fomatting option we have specified..
If you are saying it is happening in ur case then
     1. Recheck whether whether you have same text module getting printed on the
         two page. If they are different then then individual check formatting option for
         each..
      2. If above point does'nt work for you ..then instead of bold char use normal
          format for text element and see if it is printing same on both page..
Try this out and let us know your findings...
Enjoy SAP.
Pankaj Singh

How to change the automatic character format in Message Editor?

Hi experts,
We use PI 7.31, AAE adapter in our scenario. When we use the message monitor in Adapter Engine, we choose one message and open it in Message editor, we can see the message payload with AUTO Character Format: Windows-1252.
The problem is we have some CN characters and they cannot display in correct formats.
So, is there any way to change the AUTO Character format?
The other question is, can we see the message after mapping in java message monitor?
Thanks.
Kevin

Hi,
The Quantity field which is used in sales order has a standard Data Type:QUAN
with Decimal Places:3 so u cant change the settings in standard data element CRMT_SCHEDLIN_QUAN
If u want the quantity field without decimals then u need to create a Z data element.
Regards,
PePe

HR forms character format

Similar Messages

Maybe you are looking for