HR forms custom fields display

Hi,
1) I am designing a payslip, HR forms in PE51. I need to display some fields from a custom developed infotype.Example, I am displaying fields from p9030(custom developed) for employee shifts details, no pays. How can I include this fields from p9030 to payslip form.
2) In sm30 for V_T512Q, I am not able to add fields of a table longer than 11 characters. How will we add those fields to forms.
Regards,
Karthik.k

Can anybody help.?

Similar Messages

Custom field display as a checkbox in SRM - Shopping Cart

Hi Friends,
I added a new field on SRM Screen.
Field details are as follows
Field Name : ZZPCARD_ORDER
Domain : char_x (Checkbox)
When I see BASIC DATA screen on Shopping Cart, I am getting this field as a simple character field but NOT as a CHECKBOX. Can anyone help me to display this as CHECKBOX ? FYI,I have tried with different data elements / domain available as checkbox. Customer fields are displayed dynamically in subscreen so it is bit difficult to find field attributes.
Thanks and Warm Regards.
Pras Durafe

Hi
Pls refer to the following thread for more details
Custom fields not display in SRM5.5 Basic Data Frame
Hope it helps.
Pls reward suitable points.
Regards
- Atul

OTL Timekeeper Form Custom Field map to specific Element Input Value

Hello Everyone,
I have the below requirement.
1. Create a custom field in OTL Timekeeper Form. This field is based on the Element Selected on the timecard.
2. Once the Timecard is transferred to Payroll, the custom field should go to a specific input value of that element.
I know how to perform Step 1 above. But i am unable to find out how i can map the value in custom field to a specific Input value of the element.
Any inputs are appreciated.
Regards,
Jay

Any tips people?
Can this be achieved?
This is what i have done so far.
1. Created a new Value set for the custom field.
2. Created an alternate mapping to map the value set value to InputValue13.
3. Created the alternate name.
4. Added the alternate name to 'OTL Alternate Names' DFF.
5. Added the Alternate name to the 'Preferences'.
Testing:
1. Created a Timecard populating the custom field.
2. Timecard submitted and approved successfully.
3. I verified that the custom field value goes into attribute13 of hxc_time_attributes where the attribute category is the corresponding element (should it be against the attribute category: Dummy Element Context? If Yes, then how to do it?).
4. Then i ran the program 'Transfer Time from OTL to BEE'. This transferred the values into hxt_timecards_f, hxt_sum_hours_worked_f, hxt_det_hours_worked_f. But nowhere in these tables do i see the custom value.
Did i miss any step? I did not define anything in the 'Define Mapping Components' of Deposit/Retrieval Process because InputValue13 is already part of it unter type 'Dummy Element Context'.
5. Since it is not in hxt tables, i did not find it in pay_batch tables too.
Any guidance is appreciated.
Regards,
Jay

Custom field display on PO (me23n)

Hi, there.
On me23n screen in ECC60, I see descriptions of plant, material and material group code appear on
the screen, instead of code value.
I need to create a custom field on me23n and I need to make description of the custom field appear,
just like other standard field.
(The custom field has a custom master table with description ).
How could I achive this, without creating another custom filed for decsription?
Please, let me know.
Thanks...

Hi
Pls refer to the following thread for more details
Custom fields not display in SRM5.5 Basic Data Frame
Hope it helps.
Pls reward suitable points.
Regards
- Atul

Oim reconciliation not update after adding custom fields

In Oracle Identity Manager 11.1.2 with connector
Connector for Oracle Internet Directory Release 11.1.1
I reconciliated users LDAP to oim, and after I add custom fields for target reconciliation, and I try to update these users with the new custom fields resend reconciliation event, this new custom fields displays in the event reconciliation page and do not in the user form for LDAP.
I already create the new form with the news custom fields associated with the application Instance.

Solution:
FVC (Form Version Control Utility) comes with OIM which updates the form which are associated with existing users.
Using the Form Version Control Utility - 11g Release 2 (11.1.2)
OR
Update PROCESS_FORM_TABLE set PROCESS_FORM_TABLE_VERSION =(Select SDK_ACTIVE_VERSION from SDK where SDK_NAME='PROCESS_FORM_TABLE');COMMIT;NOTE:Replace PROCESS_FORM_TABLE with actual process form i.e. "UD_XXX"

Creator in custom field entry point display method - Process Manager

Hi All,
I'm trying to create a custom field in Process Manager that grabs the creator user id and the current calendar year and displays a table of vacation taken for the year in an entry point. The problem is that I cannot figure out how to grab the creator's uid without using an iProcessInstance object which is not created until the form is submitted.
Does anyone know how I can do it?
Thanks in Advance for your help
-Dug

Hi Ghanesh and SRM experts,
I went through your link mentioned below and I have the EXACT same issue. I am using SRM 5.5 and I have added a custom field to the quotation item level. I am unable to make this field editable no matter what I do .
1) I have gone through all notes mentioned in your scrap and I have implemented them all .
2) I have added the custom field to INCL_EEW_PD_ITEM_CSF_QUOT and INCL_EEW_PD_ITEM_CSF.
3) I have also implemented BADI BBP_CUF_BADI_2 and I confirm that the method MODIFY_MODE_QUOT is never getting called. MODIFY_SCREEN is getting called , and the value of the flag ET_FIELDS-XINPUT is always 'X'. Still the quotation field is display only.
Your post is dated a few months back. If you have solved this problem could you please let me know how.
Help from anyone who anything about the above will be appreciated.
Thank You .
Regards,
Ajali Sen

Customize Approval Form to add custom fields using SharePoint Designer

Hi,
i have a created a Custom approval workflow using SharePoint Designer 2010. This is two steps approval WF, All i did put the variable "CancelonRejection" Value "Yes" and one Approval action with 2 different users as Serial. Right now
Status, Requested by, Consolidated comments and comment fields are available on the approval form. Now i want to add some fields with radio buttons on Approval Form, so that 1st approver can select those radio/check box. Once 1st approver will approved this
then display all the values on 2nd approver approval from or send email to 2nd approver along with all the information from 1st approver.
Thanks in advanced!

Hi,
According to your post, my understanding is that you wanted to customize Approval Form to add custom fields using SharePoint Designer.
In the SharePoint Designer, you can customize the task form.
Here is a great article for your reference:
Creating Custom Workflow Task Approval Forms with SharePoint Designer 2010
However, every task can only have one task form.
That is to say, the two approvors will have the same task form.
As a workaround, I recommend to customzie the task form using InfoPath.
You can create different view for the approvors.
You need to add form load rules to swich views based on the approvors.
More information:
Using Multiple Views in Customized List Forms
Add, delete, and switch views (pages) in a form - InfoPath
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Custom field's text not getting displayed in standard report

Hi All,
I have a requirement like this .
There is a Custom field which we have added in a standard FICO report ie S_PL0_86000030 ( G/L Account - Balances ).
The custom field is added through a report painter , while seeing the config of report painter the custom field is showing the selection text , but when we run this transaction S_PL0_86000030 , the technical name of that field appears in the selection screen .
For example if the field is ' matnr' then we give the text as 'Material Number' . Then in the screen this field is getting displayed as Matnr instead of Material Number.
Please suggest me on this.
Thanks,
Sumit

In transaction GRR2
Insert->
selection parameters ->
take the variable type as >Tesxt varaible for selection parameter
chosse >material no.
hope ths helps
Bhanu

Custom field not getting displayed in SUS PO item level

HI all,
We are using SRM 5.0, ECC6.0 and ECS scenario.
As per SAP note 762984, we have enhanced the structures such as :
INCL_EEW_PD_ITEM_CSF_SUSPO
INCL_EEW_PD_ITEM_CSF
and have added a record in the following place in SPRO:
Supplier Relationship management-> Supplier self service->Make field control settings for tables.
| Item | Display | Z.PO.ITM.VIEW
| Item | Change | Z.PO.ITM.EDIT
But we are unable to display the field in the SUS screen.
We had also referred to the following blog :
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
but had no success.
Please let us know if we did something wrong or are we missing something.
Also please let us know if BSP changes are really necessary to do this as neither in the SAP note nor in the above mentioned blog, there is any mention about this.
Regards
Kishan

Hi Bharadwaj,
Thank you for your inputs. I executed the program but it didn't display the field.
But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
Regards
Kishan

Custom fields in additional data B not displaying - Sales Order

Hi gurus,
I added some custom fields to the addtional data B tabstrip in sales order screen, but they didn't display. This is in the client's system. BUT in our own system it works perfectly. The screen has been activated.
Maybe it's because of the version difference?
Anyone experienced this before?
Any suggestion will be great.
Thanks

Resolved by myself.
For those who would have the same question, please refer to SAP note 386694.

Custom Field value is not getting populated in Display mode

Hi Experts ,
I have created a custom field on sales tab for BP Role Bill to prty in BP transaction in SAP CRM. The problem i am facing is that , after i chose my sales area field value is not populating in first time no matter whether i am in display or change mode but the moment i switch to the other mode the value is being populated. Kindly help me in solving this.
Regards,
Ameet

Dear Chetan,
If the field is added through AET, can you please check the Get & Set Methods?
If the field value has fixed values which you have defined while creating, then check GET_V & GET_P methods.
Thanks & Kind Regards,
Ravi Kumar A R

Custom fields not display in SRM5.5 Basic Data Frame

Hello Everybody,
      I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
     No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
    I added these fields by help of 672960 OSS notes..
   Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
Is there anything else do i need to display custom fields in basic data frame??
I have one more question..
When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
To display all the fields which are display in GUI Mode also should display in URL..
To bring this functionality , What do i need to do?
I appreciate if you answer these questions..
Thanks,
John.

Hi Disha,
We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF". We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
I will be gald to provide any kind of info.
Thanks in advance...

GRC CUP - How to add a custom field in "Select Roles/Groups" form

Hi Forum,
I created a custom field "REGION" in CUP configuration. I used this field in "Role Attributes"
In "New Account" workflow, when i click on Select Roles/Groups" a screen for Select Roles/Groups will display to select the roles by different combinations.
I need this "REGION" field in the above selection creria to select roles by REGION.
How to make this field "REGION" appear in above selet cretiria.
Thanks,
RAM
Edited by: Ram.Sathish on Apr 21, 2011 3:46 PM

you can not add custom fields in the search, have you thought about using the company field as the fied for location?
Regards,
Chinmaya

Need to Make end customer field mandatory in sales order form.

I need to make end customer field mandatory when sales channel entered as some value...
for this i have used when validate record on order form
when i enter a value in sales channel as desired value the form is getting saved automatically and the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
let me know the sequence how it works if any one knows.

Sanni,
>
when i enter a value in sales channel as desired value the form is getting saved automatically and (then) the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
>
Which trigger are you using to do the "getting saved automatically'?
Does this trigger fire before the trigger that is making the field mandatory?
Regards,
PS: Is this an Oracle EBS query? If yes, this is the wrong forum
Edited by: Prabodh on Jun 14, 2012 4:48 PM

Custom field in Account Master Data Tcode BCA_CN_ACCT_03 - Display Account

Hi all,
I want to add a custom field in Basic Data tab of display account screen : Tcode BCA_CN_ACCT_03.
Please give step-by-step solution.
Points assured!
Jogdand M B
Edited by: Jogdand M B on May 19, 2008 5:36 PM

Solved by myself
I write here the response because I didn't found it anywhere:
When you are adding a custom field to MAKT table you have to add it to appending structres SKTEXT and DMAKT too because the standard uses them to read/write the data to MAKT. It's easy to do but hard to find out

HR forms custom fields display

Similar Messages

Maybe you are looking for