HR Infocubes and Reports

Hi,
CAn i know the standard Infocubes for OM, HR, Benefits, Recruitment, Qualifications, Time, and Payroll and also
standard list of BI reports.
Thanks
Eswar

hi
You can find this info on the SAP help. Here are some links to get you started:
http://help.sap.com/saphelp_nw04/helpdata/en/36/8d863c651f11d3971b006094b969cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/90/18c5394dbfef35e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/22/7883373c1af326e10000009b38f8cf/content.htm
Hope this helps...

Similar Messages

Develop report based on INFOCUBE and ODS

Hi,
Pls, can anybody help regarding developing reports based on INFOCUBE
and ODS object
i am using SAP BW 7.0
what is the transaction code for reports
what are the steps to develop reports
Thanks\
- Mubeen.

There is no transaction code as such as you have to use the front-end application to create queries off your Cubes/ ODS.
open Bex query designer -> select info provider (cube or ods) -> drag and drop the keyfigures in columns, -> char in rows -> save.
Also look at
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm

BI content InfoCube missing for reporting and reports show'~' in with KFs

Hello friends,
I need help with the following two issue with the business content query that I have
installed in DEV system.
1. I have installed a BI content infocube and 5 standard
   queries with it, I am able to see and execute the query but some other
   users are not able to see the Infocube listed under Infoarea. The same
   users were able to see the Infocube if they tried creating a new query.
2. When I execute the same installed standard BI content query all the key figures values in columns are shown with a '~' symbol before and after it.
   example: $ 198.63 and -$ 0.02
   How do I over come this ? and what might be the reason ? Please suggest.
Thanks,
SONU.

Hi Sonu,
In Tcode SU01 check roles and profiles for your users.
Then in PFCG check the authorizations for that specific roles you have found in SU01.
Maybe your users have restrictions on query names: maybe they are authorized to execute only query starting with "Z" and BC query start with "0".
Ciao.
Riccardo.
PS: If Bhanu has solved your problem for item 2 I think you have to assign points...

Unable to consolidate data from two DSOs into an InfoCube for reporting.

Hello Experts
I am working on BW 7.0 to create BEx Report as below:
This report will have data coming from two different sources, some data from COPA DSO [such as Customer Number, Product Hierarchy1, Product Hierarchy2, Product Hierarchy3, Product Hierarchy4. Product Hierarchy5, Product Hierarchy6 and a few other Key Figures] and the rest [such as Product Hierarchy, Reference Document, Condition Type (both Active & Inactive), Condition Value and a few other Key Figures] from another DSO (ZSD_DS18) which is a copy of the BCT DSO (0SD_O06). I've chosen this DSO because this is the BCT DSO which is used to store data from a Standard Extractor 2LIS_13_VDKON.
Below are the screenshots of these 2 DSOs:
I have successfully extracted the data from 2LIS_13_VDKON (includes PROD_HIER but not Customer Number) and loaded into a DSO (ZSD_D17).
All the testing is done using only one Sales Document No (VBELN).
First test that I tried is.. to create an Infocube and loaded data from ZCOPA_01 and ZSD_DS18 and when the LISTCUBE was run on this InfoCube, the data is coming up in two different lines which is not very meaningful. Screenshot below:
Therefore, I have created another DSO (ZSD_DS17) to Consolidate the data from ZCOPA_01 & ZSD_DS18 establishing mappings between some of common Chars such as below:
ZCOPA_01                    ZSD_DS18
0REFER_DOC <->        0BILL_NUM
0REFER_ITM    <->        0BILL_ITEM
0ME_ORDER    <->        0DOC_NUMBER
0ME_ITEM        <->        0S_ORD_ITEM
51 records are loaded from ZSD_DS18 into ZSD_DS17 and 4 records are loaded from ZCOPA_01 into ZSD_DS17 for a particular Sales Document Number.
When I am using a Write-Optimized DSO, data is coming in just 1 line but it is showing only 4 lines which is aggregated which is as expected since W/O DSO aggregates the data. However, when I use Standard DSO, the data is again splitting up into many lines.
Is there something that I am missing in here while designing the Data Model or does this call for some ABAP being done, if so, where or should I have to talk to the Functional Lead and then Enhance the Standard Extractor, and even if I do that, I would still have to bring in those Key Figures from ZCOPA_01 for my reporting?
Thank you very much in advance and your help is appreciated.
Thanks,
Chandu

in your (current) InfoCube setup, you could work with "constant selection" on the key figures
for the COPA key figures, you'll need to add product hierarchy to the key figures with a selection of # and constant selection flagged
for the SD key figures, you'll have to do the same for customer & the product hierarchy levels (instead of product hierarchy)

Infocubes and info objects

Hi guys,
i'm new to BI. can any one differentiate between Infocubes and info objects..
please be a bit specific.....

Hi,
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
Structure
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.
The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
ODS versus Info-cubes in a typical project scenario
ODS
why we use ods?
why is psa & ods nessasary
InfoObject: Basic building block of BW.. ( Its like a field )
Definition
Business evaluation objects are known in BI as InfoObjects. They are divide into characteristics (for example, customers), key figures (for example, revenue), units (for example, currency, amount unit), time characteristics (for example, fiscal year) and technical characteristics (for example, request number).
Use
InfoObjects are the smallest units of BI. Using InfoObjects, information is mapped in a structured form. This is required for constructing InfoProviders.
InfoObjects with attributes or texts can themselves also be InfoProviders (if in a query).
Regards,
Ram.

Unable to View By Infocubes at Report Level

Hi experts,
could you please any one sort out this problem.
IN SAP BI - BUSINESS CONTENT Unable to View By Infocubes at Report Level"
Regards,
Subhash.

Hi,
Select the cube and in Grouping choose "In dataflow afterwards" you will get all the queries related to the Infocube.
Regards
Md Zubair Sha

About infocubes and infoobjects....

Hi,
Currently I am working on SAP AFS module.
I came across various terminologies in AFS module like infocubes and infobjects.
1) Are infocubes same as tables in DDIC ?
2) Do I use the regular select queries to extract data from infobjects, the same way I do on tables ?
3) What transaction do I need to see details of data in infocubes/ infoobjects ?
Any insights will be grealy appreciated...

hi,
Infocubes are based on extended star schema model.it is the data storage area where u can create queries for reporting.

Packaged InfoCubes and Query Sets

How many Ready to Use InfoCubes and Query Objects come ready to use with the baseline BW implementation; any breakdown by functional area?
Thanks in advance!

Hi,
If you have a standard R/3 implementation, there is Business Content for most reporting needs. Those Ready to Use models include Hundreds of queries.
The data models are of great help and implementation time can bei reduced dramatically using them. However, IMO the supplied queries give a good example of the possibilities, but we usually create our own ones.
Beat Stoller
The Swiss Post

BI 7.0. Standard cubes and reports for SD, MM, FI, CO, PP, PM

Hi All,
I desperately looking for a list of standard cubes and report for SD, MM, FI, CO, PP and PM .... is there a document on this complete
I tried searching but no avail
<removed by moderator>
Thanks in Advance
Nathan
Edited by: Siegfried Szameitat on Nov 7, 2008 9:20 AM

Can you tell how did you search ???
Just go to RSORBCT transaction and go to infocubes :
Just do find as 0SD .... you will find all Business contents for SD related, similarly for other modules..
If you have chosen grouping as "Before and After wards" you should find the entire flow along with reports.
Hope this helps.

Differences between an InfoCube and ODS object

Hello All,
I am always hearing that an ODS overwrites data while a cube adds data loaded, and an ODS is a flat table etc.
Does anyone have a comprehensive document/article on how they differ so that I can be weary when doing data loads etc and be in a better position to not make a mistake when deleting data out of the targets etc, especially since financial data is so sensitive.
Thank you and kind regards,
Keith Kibuuka

Hi Keith,
I found below data on another site..
The most important difference between ODS and BW is the existence of key fields in the ODS. In the ODS you can have up to 16 info objects as key fields. Any other info objects will either be added or overwritten! So if you have flat files and want to be able to upload them multiple times you should not load them directly into the info cube, otherwise you need to delete the old request before uploading a new one. There is the disadvantage that if you delete rows in the flat file the rows are not deleted in the ODS.
I also use ODS-Objects to upload control data for update or transfer routines. You can simply do a select on the ODS-Table /BIC/A<ODSName>00 to get the data.
ODS is used as an intermediate storage area of operational data for the data ware house . ODS contains high granular data . ODS are based on flat tables , resulting in simple modeling of ODS .
we can cleanse transform merge sort data to build staging tables that can later be used to populate INOFCUBE .
Thanks
An infocube is a multidimentionsl dat acontainer used as a basis for analysis and reporting processing. The infocube is a fact table and their associated dimension tables in a star schema. It looks like a fact table appears in the middle of the graphic, along with several surrounding dimension tables. The central fact is usually very large, measured in gigabytes. it is the table from which you retrieve the interesting data. the size of the dimension tables amounts to only 1 to 5 percent of hte size of the fact table. common dimensions are unit & time etc. There are different type of infocubes in BW, such as basic infocubes, remote infocubes etc.
An ODS is a flat data container used for reporting and data cleansing/quality assurance purpose. They are not based on star schema and are used primaily for detail reporting rather than for dimensional analyais.
An infocube has a fact table, which contains his facts (key figures) and a relation to dimension tables. This means that an infocube exists of more than one table. These tables all relate to each other. This is also called the star scheme, because the dimension tables all relate to the fact table, which is the central point. A dimension is for example the customer dimension, which contains all data that is important for the customer.
An ODS is a flat structure. It is just one table that contains all data.
Most of the time you use an ODS for line item data. Then you aggregate this data to an infocube.
cheers,
Vishvesh

Web design reporter and Report designer is not working in SAP BI

Hello,
I am facing JAVA RFC error in Web reporting designing and reporting designer tools in BEx application. For more details please check the attachment in mail Any one help me for this issue.
Please check the my system details in the following
SAP ECC 6.0 EHP 6 with ABAP stack
SAP BI 740 with ABAP stack
BO 4.1
Thanks & regards,
Surendra

Hi,
Check with basis team , either they have configured rfc connection properly or not.
Refer below also:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?QuickLink=index&…
Thanks.

How to Install the Forms and Reports 6i in Ubuntu 6.06 LTS

Dear All,
I need to install Forms and Reports 6i in Ubuntu 6.06 LTS.
I had downloaded the d2k6irelease2.tar also and extracted the tar file.
I don't know how to start up with the installation further., Is there any document available for the installation process inubuntu.. or what are the steps that i need to follow to make it work..?
Many thanks in advance...

Hi,
Here's the Forms and Reports Services Deployment Guide for OAS 10g 10.1.2:
http://download-east.oracle.com/docs/cd/B14099_11/web.1012/b14032/toc.htm
You will need to modify your default.env to point to the directory where your .fmx is located and formsweb.cfg to run the specific form, e.g. foo.fmx (default is test.fmx).
HTH,
Jim

Copy data models and reports from BW 3.1 to NW 2004s

Hi experts,
Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
Thank you very much in advance.

Hi Frank,
Sounds like a cross version transport is needed.
This is a solution we have used to do what you want to do:-
Create and release a transport as per normal.
Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
Basis help is needed here.
From here onwards using stms_import should help you in the normal manner.
Works a treat.
Have transported the following all correctly appearing as 3.x data models in NW2004s.
DSO objects.
Cubes
Transfer/Update rules
Reports.
Cheers,
Pom

How to protect SAP Application Tables and Reports in R/3

Hi Gurus,
             Any one please explain me detail how to protect tables in R/3 with different senarios.
              How to protect reports in SAP R/3 without assigning SA38 transaction access
              How to protect Program in SAP R/3 in R/3

Hello Happyman,
<b>What do you mean by Protect Table, Program and Report?</b>
Let me ask you one base Question, On which area are you working? Are you from functional side or Technical side (Developement or Basis guy)?
This is very clear cut answer that with the restricted autorization you can protect table and programs. Do not provide the change autorization.
CATCH your BASIS guy and he will do rest of the things. Just explain him what are you want to protect.
Hope this helps.
Regards
Arif Mansuri

Forms 3.0 and Reports 1.5

Hi everyone,
Will forms 3.0 and reports 1.5 work with Oracle 8.x.
If yes then how is it done.
If no then is there a way to convert forms 3.0 and reports 1.5
applications to forms 4.5 and reports 3.0 i.e. from a character
mode platform to GUI mode.
Thanx in advance
Arun C
null

Dino Pesce (guest) wrote:
: Detra (guest) wrote:
: : There is some documentation that may help you. Look under
the
: : Tech Info link and the Other Topics link under Contents and
: find
: : the title Upgrading Existing Applications to
Developer/2000. I
: : hope this helps.
: : Brad (guest) wrote:
: : : Arun (guest) wrote:
: : : : Hi everyone,
: : : : Will forms 3.0 and reports 1.5 work with Oracle 8.x.
: : : : If yes then how is it done.
: : : : If no then is there a way to convert forms 3.0 and
reports
: : 1.5
: : : : applications to forms 4.5 and reports 3.0 i.e. from a
: : character
: : : : mode platform to GUI mode.
: : : : Thanx in advance
: : : : Arun C
: : : You need to upgrade, Forms 3.0 is not Y2K compliant and is
: not
: : : going to be supported. To upgrade then you need to decide
: what
: : : you want done in GUI. The process can be relatively easy
but
: : : there is work no matter what you end up doing.
: : : Brad
: If you have Developer/2000 vers. 1.3, you can try the
following,
: for
: example in a Dos window :
: f45gen32 module=your_module_name userid=username/pswd
upgrade=y
: version=30
: Where your_module_name is a Forms 3.0 form (for instance
: myform.inp). This will create a Forms 4.5 module (extension
.fmd).
: I hope that's what you need.
: Ciao !
Hi there!
Now if you are upgrading to FORMS5 then you need to rename the
INP file to FMB and then run it through the genarator
(F5gen32). This does work because I use this technic.
Panx
null

HR Infocubes and Reports

Similar Messages

Maybe you are looking for