HR Infotype screen changes

hi,
in PA30 , for the infotype 0022 , We wish that the field : "Institute/Location" will be a listbox instead of textbox as default . Is it possible and Where we can input the list values ? in which transaction ? and how to config this in SPRO
Thank in advance.
Points rewared immediately

TRY
This
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1

Similar Messages

HR Infotype Screen Programming!

Hi All,
I have a text field in my infotype screen which is editable.
By default, the enteries are in CAPS.
What do i need to do, if i want the field to accept "Caps" and small letters aswell?
Thanks in advance for all the responses.
Regards,
Sundar.

Sundar,
If you are working with a standard SAP infotype, fields and Screens, this change is considered a modification.
The other thing that you should check is if your field is tied to something defined in the data dictionary, then upper/lowercase is also attached to the domain of your field definition. Changing it only on the screen may not necessarily populate the field with upper/lowercase.
If you click on the "definition" tab of the domain definition you will see a checkbox called upper/lower case.
Best Regards,
Chris H.

How to hide OM infotype screen field

Hello Experts.
Please let me know how to hide OM infotype Screen field ? i want to hide Percentage field on IT1011.
I know i can create alternative screen "Z" and hide the field and attach alternative screen to the Module pool.
Please let me know if i can do this using BADI so there will not be any change to standard.
Regards,
Saurabh

Hi Shiva,
To get the detail about a table filed you can use DDIF* function module.
Here in this particular case you can use FM   DDIF_FIELDINFO_GET.
Pass the table name & field name.
After executing that FM you can check   DFIES_TAB in Tables parameter. i t will be having an entry.
Check for filed name as   KEYFLAG , if it is not initial ie. X then supplied filed is Primary Key.
If KEYFLAG is initial then supplied filed is not a primary key.
Thanks & Regards
Satyam

Upgrade from 4.7 to ECC 6.0 - screen changes

Does anyone have a document detailing the HCM screen changes from 4.7 to ECC 6.0

As mentioned, there are not many changes in screens - I guess you'll just have to wait and see.
But this was never a problem during upgrade.
Be ware of note 783499 and it's implications.
You will have problems with IT0009 until this note was handled.
One more thing. Some of the infotypes no longer accept maintenance of text. You need to turn this off in T582A, otherwise it looks like you can save text, but nothing is saved. Whenever you hit T582A you will get an error message if the text maintenance is ticket off and not allowed. But it is not turned off automatically during upgrade, so you have to check the infotypes. I seem to remember IT0002, 0006,0021 are some of the infotypes no longer accepting text maintenance.
Hope this helps
Kirsten

Way to see infotype screen without going PA20?

Hi Experts,
Is there a way to see just the infotype screen without going to PA20. I want to see the changes I am making using T588M and see which field has what technical field name and how the screen will look like when I make changes using T588m?
Thanks a bunch,
JESS..

Hi,
You can also check screen painter through transaction SE51. Give the module pool name under u201Cprogramu201D and the screen number, select layout editor and display. If you click on any field, the technical name will appear in the u201Cnameu201D row above. Further, any field with u201C?u201D is a mandatory field.
Hope this helps.
Donnie

Infotype screen chage

Hi All,
How do i change infotype screen for infotype2?.If i hit system menu status it shows screen number 2000.I need 2010 for molga 14 ugr92.Points will be rewarded.
Thanks.
Message was edited by:
fred johnson
Message was edited by:
fred johnson

Hi!
I am not sure, if you have tries Customising User Interfaces in the IMG under personnel admin.
Rgds
Sarajit

Unable to open email inbox or files. screen changed suddenly last night. got some message about patch not being applied. i have the patience of a gnat and have no clue how to fix this issue. HELP! in English

I'm running Mozilla-firefox on a Lenovo laptop. Last night the screen changed suddenly. brief alert about patch. unable to open email inbox to read/send emails. logged off thinking all would be right by morning. today, can access internet, google, etc, but unable to open email inbox. plus the listing of the various yahoo accts has changed the sequence order. please help. i depend on my email for my livelihood. i can read emails on my blackberry so the issue is not my internet provider.

In the patch 29, it is
function encode_attachment(str) {
var c, i, s = ''
for (i = 0; i < str.length; i++) {
switch (c = str.charAt(i)) {
case ' ':
case '#':
case '?':
case '%':
s += NN ? '_' : escape(c); break
default:
s += c
return s
NO issues seen, Able to open attachment which has space in the file name.

Screen changes are not active in production tenent

Hi Experts,
I realized the transport of a solution to the production environment and as can be seen in the attached image the solution has been successfully activated.
The scripts "OnSave", "AfterModify", etc for example are up and running in the production environment, but all the changes that were made on screen are not displayed to users.
Does anyone know how to make the screen changes available to users?
Best regards.

Hello Felipe,
What tool did you use to "make changes on screens"?
UI Designer started from SDK?
Adaption mode in UI?
Bye,
Horst

What makes my screen change after going to sleep?

I have os10.9.2 and since I installed it 6 weeks ago my screen changes sizes after it wakes up. I have a mac mini.

At the bottom of your thing it says you are using 10.7.1. Is this correct? If so, run Software Update first, and see where that takes ya. From there, if you are still having issues with the black screen, try opening Disk Utility, and hit Verify Disk. If this comes up with errors, re-start your computer holding the Option button down, from there, select Recovery Disk as your start up disk. You will be able to locate Disk Utility in there, and you can Repair Disk from there.
If it does repair disk successfully, that could be part of the problem. If that doesn't work, follow the steps in this article to reset PRAM/NVRAM http://support.apple.com/kb/ht1379
Even still, if that doesn't seem to correct the problem, i would back up everything on your computer to an external harddrive, erase, and re-install 10.6, run Software Update a few times, check the app store for the digital download of Lion....you should not need to "buy" this again, it should see it in the purchased section..
Update again with Software Update when you get the successful re-installation of Lion. I'm not 100% positive with the whole re-installation steps, if it walks you through going through the Migration Assistant or not, but even if it doesn't, that's okay. You can still locate Migration Assistant via the Utilities folder and bring back all your Time Machine stuff again.
Still if you want to dig even deeper to see if there is a problem with your hardware, you can run Apple Hardware Test. Check this article for steps...http://support.apple.com/kb/HT1509

Screen changing colors

Hey guys. Lately every time I've woken up my Macbook the screen changes colors. It will go through all of the primary colors and then some gray horizontal and diagnoal stripes, and sometimes the screen will flash in and out. Usually if I close the lid and reopen a couple seconds later, it's fine. But, is there any way of fixing this? I don't want it to turn into a bigger problem.

You may be having a problem with your screen, your integrated GPU or your connection cable between the logic board and the screen. The only way to ferret out which problem you have would be to take your machine into your local Apple Store or an AASP and have them run diagnostics on the unit. They can give you an idea of what's up with the machine and an estimate on what it would cost to fix it.
Good luck,
Clinton

Pavilion DV& screen changing colors

When turning on the laptop, the screen changes colors (red, green, gray, blue, etc) before coming on. It took almost 25 minutes for it to stop and then finally get the sign on screen.
What could be the problem? The laptop is about 3 years old.
If it need to be repaired, where would i go (Staples? BestBuy?)
Is it something I could fix myself?
TIA

@harperhp ,
Hello and thank you for posting on the HP support forum. Generally when you experience this issue it is due to a failure of the graphics card.
Does this happen if you try and boot into safe mode?
Entering Safe Mode (Windows 7)
Please post back if you can get into safe mode without this issue. If you have the same problem going into safe mode then you will want to contact HP phone support for repair options. You may not be able to get the parts through third party vendors.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Computer Screen Changes Colors

When I open Adobe Acrobat 8 my computer screen changes color and the dots on the screen show. Do you know what setting is wrong?

This is the Reader forum. The Acrobat one is here:
http://forums.adobe.com/community/acrobat

Screen changes colors after macbook dropped

Yesterday I accidentally dropped my laptop and when trying to recover, the screen changes from alternating full screen colors (red - green - blue and then black and white gradients). I'm guessing this has to do with the graphics but I am not sure if this has happened to anyone else and if there is some sort of reset button.?

That symptom appearing after a drop surely indicates hardware damage so no reset, even if available, is going to help. You'll need to have an Apple Store or Authorized service provider evaluate it. Hopefull it is something small like a damaged display cable but, if the GPU was jarred from its solder joints by the impact (quite likely) the only real cure is a new logic board.
If you have homeowners'/renters' insurance, put your carrier on notice of an accident. many such policies cover repair/replacement after an accident--even outside the home--subject to the usual deductible.

Feature to default values on infotype screens

Hi All,
Could I use a Feature (txn PE03) to determine the default values on an infotype screen?
For example, I want the value in field FUNKT on Infotype 34 to default to say 'KLMN' if the Employee Group is '1' and the Emp. sub group is 'Z5'.
I would like to use the screen modification config (table T588M) to assign the Feature and get the values without coding.
I know I can achieve this by using a subroutine on dynamic actions or a BADI for infotype processing etc. but I am lazy and don't want to code if I can avoid it.
Many thanks in advance
Sanjay

Thanks Sarika.
I can create a Feature in PE03 but how do I use that in the config (table T588M)? Because if I am not able to use it in the config, I will be forced to code (using any Fn. Mods of the likes of HRFEATUREBACK*).
The Feature ABKRS doesn't seem to be specified in table T588M as such there is bound to be coding behind it in the IT0001 processing programs.
Cheers,
Sanjay

Need help on IDES screen change script

Dear All..
Can any one tell me the steps of the IDES screen change when sap logged on.., i want put my company logo and company name..
advanced thanks for help
Praveen

I got the script for this question..
Thanks
Praveen

HR Infotype screen changes

Similar Messages

Maybe you are looking for