HR Master data replication from R3 to SRM

Hi All,
I am trying to replicate one orguint from R3 to SRM.
So I do PFAL for the orguint on R3 but when I check the Idoc status in SRM using transcation WE02
under Status Record there are four status as 51 With following messages:
1)HR: ALE inbound processing for HR master data
2)Error: insertion of infotype 5585 (return code 6 )
3)Error: insertion of infotype 5582 (return code 6 )
4)Error: insertion of infotype 1001 (return code 6 )
I also checked in SRM PPOSA_BBP , the orguint is not replicated.
Any tips on this?
Regards,
Anubhav

Hello Anubhav,
This is due to incorrect HR Master Data Maintainanxce...
Plz go to Transactioon:PA30 Maintain HR Master
and maintain/check the Infotypes 5585, 5582 ,1001 etc
that are shown in the Error Messages of reflection of HR Master to SRM
once after maintaining do the replication again using PFAL(Use Insert option instead of Update)
also refer to below link,might be useful..
http://www.erpgenie.com/sapedi/message_types_bp_hr.htm
Plz let me know
Arshad
Edited by: arshad ahmed on May 27, 2009 8:42 AM

Similar Messages

HR Master Date replication from HR to SRM

Hello,
can any one please give me some input about how the replication done from HR to SRM system. what is the Basic and message type used for this replication and which program trigger from HR system to replication an organization data?
thanks,
john.

Hi John,
HR replication from R/3 to SRM is carried out by following these steps:
1.) setting up the distribution model in SRM and R/3 for message type HRMD_ABA. You can set up number of filters in this message type, where you define HR infotypes, subtypes, object type and so on.
2.) Once you set up the distribution model, distribute the model.
3.) Report RHALEINI is used to replicate the distribution model from R/3 to SRM in the insert mode. (You can also use transaction code PFAL).
4.) Ongoing replication if performed in the update mode from R/3 to SRM will cause problems of users being broken in sporadic cases. It is advisable to use change pointers from BD14 to perform the ongoing replication.
There is an SAP docuemntation of EBP transports which explains in detail the replication. Hope this information helps.
Please assign points for usefull answers !!
Sundeep

Master data replication from R3 to CRM

i have pulled the master data from R3 to CRM .data is showing in table but000 and crmm_but_custno but it is not showing in the BP transection.
when i am searching in BP it is not showing but i can see in the table(but000 and crmm_but_custno)
What should i have to do .
Pl suggest !!!!

Hi sunil,
while searching for data in BUT000 are you searching based on BP number or content of the table? At the same time while searching with TCODE - BP on what basis you are searching?
If the data is replicated into the BUT000 it should come out with the T-Code BP also. For your problem there will be 2 possibilites.
1) the data is not at all replicated and you may looking at the old data.
2) Due to improper number ranges for R/3 and CRM eventhough the data is replicatd into CRM you can't find it because it taken some other number range.
For ex: you have created a Customer in R/3 i.e 5000456, when replicated it will take some othe number XXXXXX.
So, while searching with BP T-Code search data on the basis of first name, last name or searchterm instead of BP number.

Failure in the SOAP Runtime: Employee Master Data Replication Using IDoc OTM_EMPL

During employee master data replication from ECC to CfTE, we encountered the following error:
Unexpected element -el=OTM_EMPL ns=urn:sap-com:document:sap:idoc:soap:messages
We are using the 1402 WSDL for Replication of Employee Master Data with Employment Details (humancapitalmanagementmasterd2). The payload was not received in CfTE.
Can anybody please advise how to resolve this issue?
Thank you.

Dear Joselito,
This issue need deeper investigation in customer system.
Kindly report an incident for SAP Support for further help.
Regards,
Rahul Mishra

Technical master data replication error

Dear Experts,
I am facing a problem with the TECHNICAL MASTER DATA replication from ISU TO CRM, Problem is I have completed the initial load of the TECHNICAL MASTER DATA load is sucessfull issue is when i am creating the NEW TECHNICAL MASTER DATA like connection object and premise they are not moving to CRM immediately every time i am doing the request load or initial load by putting the filters could you please tell me how to solve this issue.
Thanks & Regards
Boyz

Hi,
Sometimes, the data can get stuck in the queues. So you need to check on it as well.
After creating the technical master data, please check whether it exist in ISU system.
Then you can check the SMQ1(Outbound queue) in ISU.
Then you can check the SMQ2 (Inbound queue) in CRM.
Also in Tcode SMW01 ( BDoc message) in CRM.

Master data extraction from SAP ECC

Hi All,
I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.

Hi All,
i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
Please find the screenshots.
I did an Environment -->Check connection and found the below,

Master data Load from Oracle table

Hi,
My master data comes from an Oracle table. The table has both attributes and texts combined. How do I load the Master data into the text and attribute info objects thru Direct Upload of Master Data?
Is it necessary to go in for Flexible Upload in this case?
Regards

Hi,
you can create two views on the table. One for the text and the other one for the attributes. Create your datasources on these views and assign them to your infoobject.
regards
Siggi

Employee master data replication error

Dear experts,
Please help on the issue, as we are doing the UAT test next week.
When doing the employee master data replication on test tenant, everything works fine, the replication status is green. But when doing the employee replication on production tenant, replication status is red, and system gives error message:
Company of employment missing for remote employee XYZ.
We check the Employee in Replication Request, and go to the Employment tab, the Company ID is missing there on PRD tenant.
But we check the table OTM_HREE_C01 on ERP PRD and Test tenant , everything looks the same, also the Configuration in report OTM_TRIGGER_EMPL_REPL_CE, everything seems to be the same there.
Could you please let us know what went wrong, and what else to check?
Thanks!
Best regards,
Wendy

Here's some things that I would check:
- Make sure idoc includes the company code for the employee <E101OTM_S_EMPL_EMPLOYMENT> <COMPANY_CODE>
- The assigned cost center of the employee must belong to the same company code this employee is assigned to.
- Review the company code set-up to make sure it is complete
- The communication arrangement to make sure it is complete

How to extract master data attribute from r/3 to bw give steps details

how to extract master data attribute from r/3 to bw give steps details screenshots

Hi
Go through the below process to extract Master Data Attribute from R/3
Hi,
Maintaining Generic DataSources
Use
Regardless of the application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any transparent table, database view or SAP Query InfoSet, or using a function module. This allows you to extract data generically.
Procedure
Creating Generic DataSources
1. Select the DataSource type and specify a technical name.
2. Choose Create.
The screen for creating a generic DataSource appears.
3. Choose the application component to which you want to assign the DataSource.
4. Enter the descriptive texts. You can choose any text.
5. Select the datasets from which you want to fill the generic DataSource.
a. Choose Extraction from View if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the database view or transparent table.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query if you want to use a SAP Query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction Using FM if you want to extract data using a function module. Enter the function module and extraction structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts you also have the option of extracting from fixed values for domains.
6. Maintain the settings for delta transfer, as required.
7. Choose Save.
When performing extraction, note SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extraction structure contains a key figure field that references a unit of measure or a currency unit field, this unit field has to be included in the same extraction structure as the key figure field.
A screen appears on which you can edit the fields of the extraction structure.
8. Edit the DataSource:
○ Selection
When you schedule a data request in the BI scheduler, you can enter the selection criteria for the data transfer. For example, you can determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extraction structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
○ Hide field
You set this indicator to exclude an extraction structure field from the data transfer. The field is no longer available in BI when you set the transfer rules or generate the transfer structure.
○ Inversion
Reverse postings are possible for customer-defined key figures. Therefore inversion is only active for certain transaction data DataSources. These include DataSources that have a field that is marked as an inversion field, for example, the update mode field in DataSource 0FI_AP_3. If this field has a value, the data records are interpreted as reverse records in BI.
If you want to carry out a reverse posting for a customer-defined field (key figure), set the Inversion indicator. The value of the key figure is transferred to BI in inverted form (multiplied by 1).
○ Field only known in exit
You can enhance data by extending the extraction structure for a DataSource by adding fields in append structures.
The Field Only Known in Exit indicator is set for the fields of an append structure; by default these fields are not passed to the extractor from the field list and selection table.
Deselect the Field Only Known in Exit indicator to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list and in the selection table.
9. Choose DataSource ® Generate.
The DataSource is saved in the source system.
Maintaining Generic DataSources
● Change DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component or change the texts of a DataSource. Double-click on the name of the table, view, InfoSet or extraction structure to get to the appropriate maintenance screen. Here you make the changes to add new fields. You can also completely swap transparent tables and database views, though this is not possible with InfoSets. Return to DataSource maintenance and choose Create. The screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BI system, choose DataSource ® Test Extraction.
● Delta DataSource
On the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the corresponding query. If you want to delete a DataSource, make sure it is not connected to a BI system.
NR

Is it possible to update master data attributes from an ODS?

HELLO ALL,
we have records coming into our ods like the following:
costcenter1, subcostcentera, subcostcenterb, manager responsible, costs (kf).
This is a custom flat file load from a legacy system.
We would like to just create an update rule from the ODS to the cost center mater data characteristic attributes.
Is this possible?
thank you

Yes its possible to update the master data attributes from an ODS.
Define your master data characteristics as a infoprovider.
Create a update rule on Characteristic with ODS as a source and do general mapping.
For step by step, pls refer..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/business-intelligence/g-i/how%20to%20implement%20flexible%20master%20data%20staging

How to delete Master Data transferred from ECC to APO via CIF

Hi, all
I'm connecting SCM 5.1 with ECC 6.0 via CIF.
When activating Integration Model in ECC, the following error occurred;
"Location 0001 of type 1001 (BSG 592BUSGP) already exists in APO"
This is because Location 0001 was already transferred from different ECC client via CIF, and not cleared.
I'm now trying to initialise master data transferred from ECC to APO via CIF, but in vain.
I suppose I have to first delete all master data CIFed from ECC in APO, or have to execute initialisation of APO master data with ECC data in ECC.
Please tell me how to do this.
For details, please read the followings;
I connected APO client with ECC client 590.
I transferred Plant and Material Master from ECC to APO via CIF.
After that, I wanted to change ECC client from 590 to the other.
I created the other client (592) by client-copying from 590 with SAP_ALL copy profile.
I deactivated Integration Model in ECC 590, and activated the same in ECC 592.
Here, I faced the problem.
The initial data transfer failed due to the duplicate of data.
Now I'm wondering how I can initialise master data in APO and transfer initial data from ECC.
Due to testing purposes, I have to change ECC clients from one to the other this time, but I cannot initialise master data in APO and cannot tansfer initial data from different ECC client.
thanks in advance,
Hozy

Hi all,
Thank you very much indeed for lots of your replies.
Thanks to all of your advices, I'm getting to understand what to do.
Well, I'll say I have to create one more client for testing with other ECC clients or I have to rebuild the client by client-copying from 001 and implementing all transportation requests, for marking del flags to each master data and running del programme sound like tough work, and sound like odd ..
Then, I've got next issue here.
In SCM-APO, I use BI objects, and , if I have to create several clients for testing, I have to set up clients where you can use both BI objects and CIFed master data.
I suppose I have to change 'BWMANDT' in RSADMINA and make RSA1 accessable in other SCM clients and implement tests.
Also, I have to register BI System for newly created SCM clients in RSA1-SourceSystem.
Well, if you have any experiences on this kind of use, and if you have any advice on it, please give me any tips.
Particulary, I'd appreciate very much if you give me advice on which way you have chosen; creating several clients or rebuilding the one client in SCM-APO when you use both BI objects, CIFed master data and Demand Planning.
Thanks in advance.
Hozy

BPC:: Master data load from BI Process chain

Hi,
we are trying to automatize the master data load from BI.
Now we are using a package with:
PROMPT(INFILES,,"Import file:",)
PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
PROMPT(DIMENSIONNAME,%DIMNAME%,"Dimension name:",,,%DIMS%)
PROMPT(RADIOBUTTON,%WRITEMODE%,"Write Mode",2,{"Overwirte","Update"},{"1","2"})
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%TEMPNO2%,%INCREASENO%)
TASK(/CPMB/MASTER_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/MASTER_CONVERT,FORMULA_FILE_NO,%TEMPNO2%)
TASK(/CPMB/MASTER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
TASK(/CPMB/MASTER_CONVERT,SUSER,%USER%)
TASK(/CPMB/MASTER_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/MASTER_CONVERT,SAPP,%APP%)
TASK(/CPMB/MASTER_CONVERT,FILE,%FILE%)
TASK(/CPMB/MASTER_CONVERT,DIMNAME,%DIMNAME%)
TASK(/CPMB/MASTER_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/MASTER_LOAD,FORMULA_FILE_NO,%TEMPNO2%)
TASK(/CPMB/MASTER_LOAD,DIMNAME,%DIMNAME%)
TASK(/CPMB/MASTER_LOAD,WRITEMODE,%WRITEMODE%)
But we need to include these tasks into a BI process chain.
How can we add the INFO statement into a process chain?
And how can we declare the variables?
Regards,
EZ.

Hi,
i have followed your recomendation, but when i try to use the process /CPMB/MASTER_CONVERT, with the parameter TRANSFORMATIONFILEPATH and the root of the transformation file as value, i have a new problem. The value only have 60 char, and my root is longer:
\ROOT\WEBFOLDERS\APPXX\PLANNING\DATAMANAGER\TRANSFORMATIONFILES\trans.xls
How can we put this root???
Regards,
EZ.

Customer master data updation from one system to another system

HI Experts,
I have an issue with customer master data updation from one system to another system. And here only one field is not updating properly from one system to another system. and we found this is through idoc , but we don't find field in any segment.
and the field is called ADDR1_DATA-HOME_CITY.
and this will displayed as different city in address column.
but as per the notes given in help , it is by program , form through only passing. but not able to trace and as per my analysis ADRC table , ADRNR had this field HOME CITY.
And this is for some customers updating wrong one from one system to another system , and for some customers field itself not updating in address column.
please can you suggest any one. here are screenshot for your reference.

that is not enough, it was enough in times before 40b release, but this was in the last century
Please read OSS note 384462 - Master data and addresses
it explains what you have to do for ALE

Customer master data replication probelm from ECC to CRM system.?

Hi..Gurus,
Intial downloading was done for master data and transaction data..but after 10 days.. some changes in ECC system will not replicate to CRM system..delta down loading working or not how i can check ? or i have again do the intial downloading for customer_main..plz help me..?
Truly,
San Rao.

Hi,
make sure that the Middleware is activated in R/3 table TBE11 for
application component BC-MID as below:
Application ID Active Text
BC-MID X Middleware
Also, in R/3 table TBE31 make sure the following even has been activated
00001321 BC-MID PI_BP_CUSTOMER_BTE_1321
In R/3 table CRMRFCPAR make sure that the delta load has not been
deactivated for the object Customer_Main....
If this is ok check filter on the object Customer_Main in trx. R3AC1 in
CRM to make sure they havent filtered out the relevent BP's
If you have a BP expample use CRM trx. CRMM_BUPA_MAP to gather the BP
from R/3 into CRM...this will either lead to a sysfail in CRM SMQ2 or
A short dump in ST22 if there are any errors...
Also, after using trx. "CRMM_BUPA_MAP" check in SMw01 for Bupa_Main
bdocs...if there are errors they will norally be on the validation of
the BP in CRM and the bdocs will have errors...
Regards, Gerhard

Material Replication from ECC to SRM 7.0

Hi Experts,
I am working on Extended classic scenario SRM 7.0 with ECC 6.0, I have created the Material Group and Master data in ECC system. While doing replication via R3AS i am getting the following error msg( I have applied Note 720819 & 330401in ECC ).
Errors:
Hierarchy for material types does not exist
(Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).)
MATERIAL: Object will not be loaded
Pl do the needful.
Regards
Mohan

Hi Pl check whether you follwed these steps are not.
Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

HR Master data replication from R3 to SRM

Similar Messages

Maybe you are looking for