HR master data replication

Hi,
I need to replicate the Organizational structure from HR to ERP system. I am using the IDoc HRMD_ABA infotype 0001. I am just sending Infotype 0001 to the ERP system. The IDocs have been succcessfully created and transferred to ERP system.
But when I am executing the report HRALXSYNC report in ERP, it doesnt show the new Org structure to me in the list. I have also created the number ranges in ERP. Please help me in any way.
All your suggestions and answers would be highly appreciated and rewarded.
Thank you in advance.
Sidhu

With respect to person, you may need to send IT0001, IT0006, IT0105/ST0105 (for user id) . But there are configuration in EBP system to take a default value if they aren't provided.
Those can be controlled thru configuration in table T77S0 . The parameters that you may need to look at are...
HRALX     HRAC
HRALX     MERID
HRALX     MSGRE
HRALX     OADBP
HRALX     OADRE
HRALX     OBPON
HRALX     OBWIG
HRALX     ONUMB
HRALX     OPROL
HRALX     OSUBG
HRALX     PALEO
HRALX     PALEP
HRALX     PBPHR
HRALX     PBPON
HRALX     PCATS
HRALX     PLEVE
HRALX     PNUMB
HRALX     PPROL
HRALX     PQUAL
HRALX     PRTON
HRALX     PSYNO
HRALX     PSYNP
HRALX     USRAC
Reward if helpful.
Regards
Ravikumar

Similar Messages

Failure in the SOAP Runtime: Employee Master Data Replication Using IDoc OTM_EMPL

During employee master data replication from ECC to CfTE, we encountered the following error:
Unexpected element -el=OTM_EMPL ns=urn:sap-com:document:sap:idoc:soap:messages
We are using the 1402 WSDL for Replication of Employee Master Data with Employment Details (humancapitalmanagementmasterd2). The payload was not received in CfTE.
Can anybody please advise how to resolve this issue?
Thank you.

Dear Joselito,
This issue need deeper investigation in customer system.
Kindly report an incident for SAP Support for further help.
Regards,
Rahul Mishra

Technical master data replication error

Dear Experts,
I am facing a problem with the TECHNICAL MASTER DATA replication from ISU TO CRM, Problem is I have completed the initial load of the TECHNICAL MASTER DATA load is sucessfull issue is when i am creating the NEW TECHNICAL MASTER DATA like connection object and premise they are not moving to CRM immediately every time i am doing the request load or initial load by putting the filters could you please tell me how to solve this issue.
Thanks & Regards
Boyz

Hi,
Sometimes, the data can get stuck in the queues. So you need to check on it as well.
After creating the technical master data, please check whether it exist in ISU system.
Then you can check the SMQ1(Outbound queue) in ISU.
Then you can check the SMQ2 (Inbound queue) in CRM.
Also in Tcode SMW01 ( BDoc message) in CRM.

Employee master data replication error

Dear experts,
Please help on the issue, as we are doing the UAT test next week.
When doing the employee master data replication on test tenant, everything works fine, the replication status is green. But when doing the employee replication on production tenant, replication status is red, and system gives error message:
Company of employment missing for remote employee XYZ.
We check the Employee in Replication Request, and go to the Employment tab, the Company ID is missing there on PRD tenant.
But we check the table OTM_HREE_C01 on ERP PRD and Test tenant , everything looks the same, also the Configuration in report OTM_TRIGGER_EMPL_REPL_CE, everything seems to be the same there.
Could you please let us know what went wrong, and what else to check?
Thanks!
Best regards,
Wendy

Here's some things that I would check:
- Make sure idoc includes the company code for the employee <E101OTM_S_EMPL_EMPLOYMENT> <COMPANY_CODE>
- The assigned cost center of the employee must belong to the same company code this employee is assigned to.
- Review the company code set-up to make sure it is complete
- The communication arrangement to make sure it is complete

HR Master data replication from R3 to SRM

Hi All,
I am trying to replicate one orguint from R3 to SRM.
So I do PFAL for the orguint on R3 but when I check the Idoc status in SRM using transcation WE02
under Status Record there are four status as 51 With following messages:
1)HR: ALE inbound processing for HR master data
2)Error: insertion of infotype 5585 (return code 6 )
3)Error: insertion of infotype 5582 (return code 6 )
4)Error: insertion of infotype 1001 (return code 6 )
I also checked in SRM PPOSA_BBP , the orguint is not replicated.
Any tips on this?
Regards,
Anubhav

Hello Anubhav,
This is due to incorrect HR Master Data Maintainanxce...
Plz go to Transactioon:PA30 Maintain HR Master
and maintain/check the Infotypes 5585, 5582 ,1001 etc
that are shown in the Error Messages of reflection of HR Master to SRM
once after maintaining do the replication again using PFAL(Use Insert option instead of Update)
also refer to below link,might be useful..
http://www.erpgenie.com/sapedi/message_types_bp_hr.htm
Plz let me know
Arshad
Edited by: arshad ahmed on May 27, 2009 8:42 AM

Technical Master data replication CRM to ISU

Dear Experts,
This is regarding the replication of TECHNICAL MASTER data from CRM to ISU. I have done all the required setting and the data is replicating to ISU as well except PoD.Unable to replicate POd.Can any one suggest on this
Also while creating Service Contract in CRM every time system ask to "identify the Premise " which is not possible as i am unable to find Premise details in CRM.
Has any one faced such issue.
Regards
Hrishi
Moderator note - thread locked, no research, generic question

Hi,
Sometimes, the data can get stuck in the queues. So you need to check on it as well.
After creating the technical master data, please check whether it exist in ISU system.
Then you can check the SMQ1(Outbound queue) in ISU.
Then you can check the SMQ2 (Inbound queue) in CRM.
Also in Tcode SMW01 ( BDoc message) in CRM.

Master data replication from R3 to CRM

i have pulled the master data from R3 to CRM .data is showing in table but000 and crmm_but_custno but it is not showing in the BP transection.
when i am searching in BP it is not showing but i can see in the table(but000 and crmm_but_custno)
What should i have to do .
Pl suggest !!!!

Hi sunil,
while searching for data in BUT000 are you searching based on BP number or content of the table? At the same time while searching with TCODE - BP on what basis you are searching?
If the data is replicated into the BUT000 it should come out with the T-Code BP also. For your problem there will be 2 possibilites.
1) the data is not at all replicated and you may looking at the old data.
2) Due to improper number ranges for R/3 and CRM eventhough the data is replicatd into CRM you can't find it because it taken some other number range.
For ex: you have created a Customer in R/3 i.e 5000456, when replicated it will take some othe number XXXXXX.
So, while searching with BP T-Code search data on the basis of first name, last name or searchterm instead of BP number.

Customer master data replication probelm from ECC to CRM system.?

Hi..Gurus,
Intial downloading was done for master data and transaction data..but after 10 days.. some changes in ECC system will not replicate to CRM system..delta down loading working or not how i can check ? or i have again do the intial downloading for customer_main..plz help me..?
Truly,
San Rao.

Hi,
make sure that the Middleware is activated in R/3 table TBE11 for
application component BC-MID as below:
Application ID Active Text
BC-MID X Middleware
Also, in R/3 table TBE31 make sure the following even has been activated
00001321 BC-MID PI_BP_CUSTOMER_BTE_1321
In R/3 table CRMRFCPAR make sure that the delta load has not been
deactivated for the object Customer_Main....
If this is ok check filter on the object Customer_Main in trx. R3AC1 in
CRM to make sure they havent filtered out the relevent BP's
If you have a BP expample use CRM trx. CRMM_BUPA_MAP to gather the BP
from R/3 into CRM...this will either lead to a sysfail in CRM SMQ2 or
A short dump in ST22 if there are any errors...
Also, after using trx. "CRMM_BUPA_MAP" check in SMw01 for Bupa_Main
bdocs...if there are errors they will norally be on the validation of
the BP in CRM and the bdocs will have errors...
Regards, Gerhard

Issue in Material Master data replication in SRM 7.13

Hi All,
We have implemented SRM 7.13 and facing an issue in material mater data delta replication.When we create a new material in ECC it does not get replicated to SRM and gives the ERROR 'Specify the relevant unit of length' and 'Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.' in SMW01.
But when changes are done to the same material in ECC it gets repicated without any issues.
Please provide your help to reolve this issue.
Thanks,
Ankur

Hi Ankur
Check your settings in CUNI transaction which UOM is this happening for or for all ?
You should go to that and check what are the conversion values maintained As seen below
In CUNI transaction go to utlilties > Adjustment select your R/3 system and click on Check mark
Also replicate the UOM from backend . By going to R3AS and fill DNL_CUST_BASIS3 and execute
Lastly go to Table T006 and T006A and click on Check table ...
Doing this would sync your UOM with that of ECC and ideally the error should vanish if not
share the screenshots
You can solve the errors mentioned above by implementing the following notes:
Call transaction SE16, enter SMOFAPPL, and set entry EBP.
Check the notes as below
520227 - Set type CRMM_PR_TAX (implement manually!)
720819 - Consumer entries
428989 - Filtering irrelevant data (for example, Sales and Distribution) Example: see attachment mod.txt.
675101 - Execute report: COM_CATEGORY_TRANSPORT
Note 872533 - FAQ: Middleware
Note 402591 - Download Customizing object DNL_CUST_BASIS3
Note 1609476 - Error loading tables DNL_CUST_PRICE and DNL_CUST_BASIS3 from ERP.
Note 393939 - Table TCURX is not downloaded from R/3 System
Note 1038966 - Entries missing in TCURX after load of DNL_CUST_BASIS3
Also refer to these who faced similar issue as yours
http://scn.sap.com/thread/1769891
http://scn.sap.com/thread/1355188

HR Master Date replication from HR to SRM

Hello,
can any one please give me some input about how the replication done from HR to SRM system. what is the Basic and message type used for this replication and which program trigger from HR system to replication an organization data?
thanks,
john.

Hi John,
HR replication from R/3 to SRM is carried out by following these steps:
1.) setting up the distribution model in SRM and R/3 for message type HRMD_ABA. You can set up number of filters in this message type, where you define HR infotypes, subtypes, object type and so on.
2.) Once you set up the distribution model, distribute the model.
3.) Report RHALEINI is used to replicate the distribution model from R/3 to SRM in the insert mode. (You can also use transaction code PFAL).
4.) Ongoing replication if performed in the update mode from R/3 to SRM will cause problems of users being broken in sporadic cases. It is advisable to use change pointers from BD14 to perform the ongoing replication.
There is an SAP docuemntation of EBP transports which explains in detail the replication. Hope this information helps.
Please assign points for usefull answers !!
Sundeep

How to avoid material master data migration of inactive materials to SRM

We are replicating material master from R3 4.6b to SRM 5.0 system. Under COMMPR01 , we can see the product status as deleted or locked .
How we can avoid the master data replication of materials which are already flagged as inactive (deletion) in R3.
Pls suggest.
Regards,
Avinash

Hi
Please try this ->
1) It is possible to use product_id without needing to replicate material masters from R/3 to SRM. For this to work you have to set the flag "Do not check product" in customizing
(see SRM Server > Master Data > Define External Web Services).
We do it like that and it works perfect for us. Only annoyance is, that we have to put leading zeroes in the product_id field.
"Do not check product" is used to avoid product check in SRM (to avoid replicating products into SRM), so they are not checked against SRM product master.
But this is not related to R/3 check.
In a classic or extended classic scenario, SRM will check that this material exists in the backend, especially for the current plant (location), before creating follow on doc.
As you created your catalog item without zeros, I guess SRM is sending this material to R/3 that does not recognize it.
Then you have this error message. Adapt your product IDs to be aligned with R/3 material master.
2) Try to run the report BBP_PRODUCT_SETTINGS_MW, there you select user as SRM instead of CRM and select service product active
3) Did you already checked OSS note 722600 and 366135 ? Also, Check the SAP OSS Notes - 786345, OSS Note 456753. It talks abt the internal and external representation of product ID in catalog and R3 system.
Related useful pointers ->
Product xx does not exist in plant xx or it has been flagged for deletion
Stock reservation movement (field XWAOK) is not flagged in ECC ??
Product XXX does not exist in plant YYY or it has been flagged for delete.
material deletion flag
Product XXX does not exist in plant YYY or it has been flagged for deletion
Hope this will help. Do let me know.
Regards
- Atul

MDG - Data Replication to Legacy and ECC

Hello All,
We are implementing MDG-M on a separate hub. Data Model is extended to support both ECC and Legacy system.
Material Master Replication has two scenarios based on the two different CR types. Requester will decide whether or not material is required for the Legacy System.
CR #1 Materials will only be replicated to ECC: It will be peer-to-peer.
CR #2 Materials will be replicated to ECC and Legacy:
ECC replication will be peer-to-peer. Only SAP relevant content will be replicated.
However, Legacy replication has to be via SAP PI. Some of the SAP fields such as Material Number, Lab Office will be mapped to Legacy Fields. There are also some custom fields which will be only replicated to Legacy System.
I appreciate if you can help me to figure out how to setup the Replication Model.
Thanks,
Hakan

Hi Hakan
Defining filters: Use transaction DRFF
Apart from that, I have these links:
MDG EhP6 Learning Map : http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000743543&
=> Master Data Governance
=> Overview: Master Data Replication in MDG for EhP6
=> Set Up, Implementation & Extensibility: Setting-up and Operating the Replication of Master Data
SDN - MDG Extensibility Center: http://scn.sap.com/docs/DOC-7858?rid=/webcontent/uuid/f0801486-9562-2e10-54b1-9c123497f1a7
Regards, Ingo

Replication of Customer master data from R/3 to CRM.

Dear Friends,
If i want to replicate customer from R/3 to CRM what are the prerequisites and how to execute a campaign for the replicated BP's(target groups).What is the load object that we use in R3AS.
REgards,
Prabhu.

CUSTOMER_MAIN is the object used to download customers from R/3 to CRM.
For CRM 5.0 you can use the link below:
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
You then need to read the instructions for:
CRM Generation
CRM Connectivity
CRM Customizing Replication
CRM Organization Model
CRM Master and Transaction Data Replication
Those steps will provide on how to setup the middleware for customers.
You then will need the to read the following building blocks for marketing:
CRM Central Master Data
CRM Marketing Master Data
CRM Lean Campaign Management.
Good luck,
Stephen

Problem in replication of HR Master Data to CRM

Hi All,
I am working on ECC 6.0 and CRM 7.0 systems.
I have made all the configurations for replicating HR Master Data from HCM( or HR module in ECC) system to CRM as per the best practices. We have maintianed the Organisation Structure only in HR module and not in ECC and we are trying to replicate the same to CRM system. For the Organsiation structure we have maintained different number ranges for all Company Codes as per the requirement.
I need to know how the number ranges are to be maintained in CRM side in BUCF transaction in order to replicate the Org. Unit with the same number in CRM.
My problem is that for the first Company Code say 1200 we are getting the O S P replicated btu when I try the same for other company codes I am getting Success Idocs but BP is not getting created when synching HR data via report HRALXSYNC.
Also suggest whether we need to maintain the same structure as in ECC HR system in HR switches in SM30 (Table T77s0).
Regards
Kshitij

Hi ,
Have you made checks related to HRALX in t77s0 table as those are mandatory for integrating ECC and CRM integration.
checks like HRALX-OBPON, HRALX-PBPON etc.
Thanks
Sonia

Deletion of master data for 0CS_ORDER

Hello Friends,
I have a requirement to enhance an IOBJ 0CS_ORDER with Order status values(2 new statues are added). I have done the enhancement part to the extractor in the source system side. Now after replication in BW, to add 2 new IOBJs in CS_ORDER, I need to delete the master data.
When I try to do this, I get the msg that some master data could not be deleted.
This is fine as we have transaction data loaded for large no. of objects which has 0CS_ORDER.
In dev, I have deleted the master data using SE14 for tables P, S , X, T.
My concern is in Production, I have huge volume of transaction data. To transport the changes, I need to delete master data. But this would require deletion of Transaction data from all IP where CS_ORDER is used.
If I do so using SE14, and tranport the changes and later load MD to CS_ORDER. Will this cause INCONSISTENCIES?
What can be other possible ways??
Please share your opinions.
Many Thanks,
VA
Edited by: Vishwa Anand on Sep 2, 2010 5:36 PM

Definitely Yes.
It will damage all the SID connections earlier which this master data had with the other objects likes transactiona objects (ODS, CUBES etc). Even You can not access the data from the cube or ODS where the navigational attributes are flagged for reading.
So do not use SE14 for deletion of MD. This is very specific to use.
You can delete the Master data as long as its not been used in other targets so that you can refill it easily and also there wont be any inconsistencies..
Hope this is clear for you..

HR master data replication

Similar Messages

Maybe you are looking for