HR  Org Unit replication ? :-(

Hi guys,
I think I saw on the srm 4.0 manual a note about HR Org Unit replication.    I searched that in my manual 4 times but I cant find it =(
Could anybody share that note ?
Thank you !!! =)
Regards,
Diego

Hello Diego,
you may also consider this document
<a href="http://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700004062262004E">Transporting SAP EBP Systems</a>.
Do not be fooled with the name of the document.
Gordan

Similar Messages

  • Org Unit replication ECC to CRM

    Hi Experts,
    Here is the issue:
    A Sales order is created in ECC and replicated to CRM. Based on this SO, we need to create returns in CRM. Now the SO is replicated to CRM with errors. So in CRM, error says: Org Unit is not determined.
    Sales Org, Dist.Ch and Div is replicated but Org Unit is not replicated as there is no Org Unit concept in ECC.
    Now how do I get out of this error in CRM Sales Order doc?
    Checked in Org Management in CRM. There is no Org Unit existing for that Sales Org which is determined. So how do I make CRM SO error free. Any thoughts from experts would greatly be appreciated.
    Thanks,
    John

    An organzation unit is simply what it means, which is logical representation of some business entity or department.  In CRM an organization unit can refer to a sales or service organization and has an attribute assigned to it, that designates what it represents.
    We typically call a organization unit that has the following attributes maintained a sales area:
    Sales Org
    Distribution Channel
    Division
    The function tab of the organizational unit is where I assign the corresponding R/3 sales area.  We then use the attributes tab in scenario sales to assign the remaining data.  This data usually is the allow division and distribution channels, along with the corresponding "tupels".  The tupel is the combination of the distribution channel and division.
    You also need to mark the the object as permitted in determination, in order for it to be used in transactional processing.
    Take care,
    Stephen

  • Employee and Org Unit BP Replication Question - how to stop replication

    Hi,
       We are replicating business partners using BUPA_MAIN for IS_U Scenario.  This is working fine from R/3 to CRM, and changes are replicating back properly (CRM to R/3).  We have a filter on BUPA_MAIN  for the business partners in a particular number range that we want replicating back and forth.
       We are also using an ALE scenario from HR to CRM and this seems to be correctly creating our Org Unit BP's and Employee BP's in a specific number range.
        Our problem is that we are seeing failed bdoc's in SMW01 when the system creates new bp's in the Org Unit and Employee Role.  The error is because we have not set up corresponding number range in R/3.  We have not set this number range up in R/3 because we do not want these types of BP's to replicate back to R/3.  Why are these types of BP's trying to replicate back to R/3 when we have a filter on BUPA_MAIN that does not include these number ranges?  Is there something else we need to set somewhere so that these types of BP's will not try to replicate back to R/3?
    Thanks,
    Pam Cirssman

    Hi
    first u need to do the filter settings in object BUPA_MAIN to stop the employee replication to R3.
    When u create the no. ranges in r3 u can remove the filter so that the process will continue.
    Regards
    Manohar

  • Org. Unit replication from R3 to CRM

    Hello,
    I want to replicate one Organizational unit, created in R3 to CRM in quality machine. How do i assign this newly created ORG. Unit in CRM.
    I went to CRMC_R3_ORG_GENERATE, but there are no lines to generate the newly Org. unit.
    Do you get the error? Can anyone help please

    Dear Vitor,
    It is only possible to use the transaction CRMC_R3_ORG_GENERATE once in
    the CRM system to download all Org. data that you need from R/3. In
    fact with this report it is possible to start multiple intial load to
    add NEW R/3 sales org to the CRM org model, but it will never update
    an existing org unit.
    e.g.:
    the protocol with the red light might be correct because transaction
    CRMC_R3_ORG_GENERATE wants to create an organizational
    unit with R/3 sales org. that may haveb been created before
    manually in PPOMA_CRM. If that is case, then it can not be created
    again.
    In case you want to maintain further assignments between sales
    org and sales office already existing in CRM; this is not possible
    by means of this report; if it were for a new R/3 sales org it would be
    possible.
    Therefore here there are just two options: either make all necessary
    assignments manually in PPOMA_CRM, or delete the CRM Org Model
    completely and rerun a new initial load.
    Regards, Gerhard

  • Replication from HR not updating SRM Org Unit adddress's

    Hello Guru's
    Can anyone help here , I am working on EC SRM 4.0. We have our SRM Org structure replicated from HR, but for some of the org units in SRM the address has not been replicated, Yet when I check org unit HR PPOSE, the address in the org unit is present and nothing seems out of the ordinary for these org units in HR
    This is causing a problem as the users attached to these nodes without address's are becoming defective and require repair
    Thanks
    Prakash

    Dear Customer,
    This inquiry would really fall under the BC-BMT-OM-ALE component. It might be best to open a thread under this component.
    Information i have found for you on this is as follows. I hope it might help you a bit.
    This issue occurs because the intial distribution has not been done
    correctly. Please review the way to distribute HR datas :
    1- Using transaction PFAL, sending the objects C, O, S successively in
       Update mode with the infotypes 1000, 1002 and 1028 only, without
       using evaluation paths (all existing objects).
       => The objects will then be created without relationship, and no
       error must be reported.
    2- Using transaction PFAL, sending the object P in Update mode.
       => As the structure objects are already present, no error message
       must be generated. If some are, please analyse them, and correct them
       before the next step.
    3- Using transaction PFAL, sending the objects C, O, S successively in
       Update mode (without restrictions, or only the infotype 1001).
       => The relationships which were not sent in step 1 are then
       distributed.
    4- The changes pointers can now be activated and processed, as the
       initialization has been done (steps 1 to 3).
    Hope it helps,
    Kind Regards,
    Edel.

  • Questions regarding HR Org Structure replication from ECC to SRM

    Hi Experts ,
    We have SRM7.0 ( SP08) with ECC6 ( Ehp4) having Classic Scenario .
    I managed to replicate entire  HR Org Structure  from ECC system to SRM system.  I replicated O (Organization), S( Postion) and P ( Person), which successfully created O, S and CP in SRM with BP for O and US...Refered Note 934372, 312090, 550055 and help link on SDN./wiki.....etc
    Now I have below questions in mind.
    1. In SRM we requiers Org unit for Company Code, Purchase Organization and Purchase Group...which we set  in FUNCTION tab for the requiered Org Unit with Checkbox and value of it and Logical system.....but in HR Org strcuture we do not have such Org Unit....so how to manage/create such these Org Units ( i.e.Company Code, Purchase Organization and Purchase Group ) ?...
    Do I need to create these Org unit manually in SRM in PPOSA_BBP ? If yes, can I create these Org Unit above or between these replicated HR Org Units  or I need to created it separtly in paralllel to these HR replicated Org Units?
    2. If above I do, then what will impact on the delta /change replication from HR integraion ?
    3. In ECC HR org Structure there are hundres of employee, out of that I just wanted to send the Postion ( we have postion based security  in HR) whom only SRM Role had assigned . How it can be acheived ?
    Will appricaite detail reply/suggestions
    Thanks
    NAP

    Hi ,
    Initially when I repliacted P of HR Org Struture it sucessfully craeted BP in SRM  and was CP in Org Structure.
    But suddenly , what happned don;t know, when I replicating Employees (P) in SRM , it is assigning  to respective Postion (S), but BP is not creating in SRM  and in the USERS_GEN  for this User, its postion and ORg Unit to whom it assigned is giving  below error
    Determination of connections to object 'BP' of 'CP' '00000015' failed
    Message no. BBP_UM_UI036
    I checked all this as per Note 550055, 934372..etc....checked respetcive setting in table T77S0...I checked address alos....but no any clue......IDoC in SRM posting sucessfully....
    Can anyone please suggest what should be the cause and solution of it ?
    Thanks
    NAP

  • Org unit error !!!

    Hi
    I have a few questions and an org unit error when trying to process a quotation. Details below. If anyone can help, then that would be great.
    "ORG UNIT (SALES) DOES NOT HAVE THESE ATTRIBUTES"
    Org unit (sales) does not have these attributes
    Message no. CRM_ORGMAN022
    I have an org unit set up as follows
    Root Org - Sales
    Sales Org - Sales - Sale Organization
    Sales Office - Sales - Sales Office
    Sales Group - Sales - Sales Group
    Org attributes for Division & Distribution Channel is a cobination called Tupel
    In the organization tab it is shown as follows
    Organization Unit - PLSG
    Sales Organization - PLS
    Distribution Channel - Z3
    Sales Office - PLSO
    Sales Group - PLSG
    No Division ?
    Why does org unit and Sales group have the same Code ?
    I have pasted the diagnosis of the error but cannot determine from that where I have gone wrong.
    Diagnosis
    You have entered or changed an organizational unit in the "Organizational Unit (Sales)" field.
    The attributes assigned to the entered organizational unit (sales) in the organizational model do not correspond with the data (sales organization, distribution channel, sales office, sales group, on the item level: division) in this document. Organizational data are inconsistent.
    System Response
    The system cannot continue to process the document. It cannot execute subsequent processes dependent on organizational data (for example, partner processing, pricing).
    Procedure
    You have the following options for solving this:
    Enter an organizational unit with the appropriate attributes. Use the input help. You can check the attributes of organizational units in Organizational Model
    Check the organizational model in CRM Customizing under Organizational Management -> Organizational Structure -> Change Organizational Structure. Change the attributes of the required organizational unit as required.
    Regards
    Avi

    Hi Avinash,
    goto TC : OOATTRCUST
    Check the following for Sales Scenario
    1. For Sales Scenario activate buffering
    2. Select Attributes/Scenarios node and check for Attribute IS_SA_ORG is having inherit. Type as '0' and deactivate invisible
    3. Remaining org.stru. attributes like IS_SA_GRP
    N No inheritance
    3  IS_SA_OFF
    N No inheritance
    2  IS_SA_ORG
    N No inheritance
    1  All should be activated for invisible(tick)
    Run CRM_COM_ORGMAN_BUPA_INTEGRATE to update org.model.
    To improve system performance, you can use the HRBCI_ATTRIBUTES_BUFFER_UPDATE(need to run after MW replication to clear the buffer) program for buffering organizational model and attributes. Call up view T77OMATTR via SM30 and select the buffering field for each scenario to buffer corresponding objects. Execute the HRBCI_ATTRIBUTES_BUFFER_UPDATE program every morning (after 0:00 hrs) before starting your systems
    i hope it ll help u
    Reward points if helpful
    Cheers
    Ranga

  • Position under Purchasing Org.'s Org Unit

    Hi,
    SRM :5.5, extended classic scenario
    When I look at the SRM Org. structure, I see the Position (S) under Purchasing Org.'s Org Unit  ?.
    What is the use of creation of Position under Purchasing Org's Org Unit ?
    Note:
    I did HR Replication in the past. I used to see the Position under the Company Code's org. unit. So that when anyone in the SRM org. structure creates a SC, it follows the hierarchy for the approval.
    With regards,
    Pranav
    Message was edited by:
            Pranav

    Hi Pranav,
    We should understand that we have role of "Operational purchaser" and Strategic purchaser" within the typical purchasing organization. These are the standard roles supplied by SAP.
    If you think of some complex purchasing organization catering to the needs of group of companies then it may have more than 3-4 levels within (May be some additional customized roles). This will decide the approval limits, authorities, powers and roles.
    Therefore, positions within the purchasing organization are created to group different roles and functions. Even I have positions in my purchasing org.
    Assign points as applicable.
    Regards,
    Ravi
    null

  • Employee resposnsibles Org unit Determination  (Employee is assigned to Org Unit)

    Hi ,
    We want to determine Org unit based on employee responsible but not on basis of USER.
    Employee responsible will be assigned to a particular position in Organization .
    We want to determine Organization unit where Employee is assigned .
    When in transaction Partner Function employee responsible is selected then Organization unit to which employee is assigned should get determined.
    When employee resposnsible is changed Org unit (Service ) should change .
    Please suggest solution.
    Thanks & Regards,
    Anup Reche

    Hi
    first u need to do the filter settings in object BUPA_MAIN to stop the employee replication to R3.
    When u create the no. ranges in r3 u can remove the filter so that the process will continue.
    Regards
    Manohar

  • Org unit date in adhoc query

    Hi
    I have created a TEM query in SQ02, based on infoset \SAPQUERY\HR_TEM_E (logical database PCH),  in which I am outputting object name and date (P1000), and org unit (P8004).
    The output on the org unit name corresponds to the most current version of the org unit, but my requirement is for it to match to the date that the course object exists, i.e. historical.
    Would anyone know a way to code this field, or whether there is a functional solution to this?
    Please do let me know.
    Anyone?
    Edited by: minttea on Aug 10, 2010 3:52 PM

    Hi..
    Pls check below code to fetch the tesxt of historical org unit. hope it will help.
    *//Internal table declaration.
    DATA : lt_00  TYPE STANDARD TABLE OF pa0000,
           lt_psn TYPE STANDARD TABLE OF zhrpositions,
           lt_ret TYPE STANDARD TABLE OF bapiret2,
           lt_01  TYPE STANDARD TABLE OF pa0001,
           lw_01  TYPE pa0001,
           lw_psn TYPE zhrpositions,
           lt_comps  LIKE zstr_hr_comps,
           lt_return LIKE bapiret2.
    Thanks,
    kl
    Edited by: Narayana on Aug 10, 2010 10:50 AM

  • Report to check org units without any position display

    Dear All,
    I want a report which i can see only the org units in a graphical way. When i am checking through Simple maintainence mode I am getting org units along with positions also with in the graphical mode i have selected the view option under options menu there can able to see individual departments along with positions.
    My request is i want to see the organization structure along with sub org units under sub org units with departments without positions. please let me know is there any standard reports available.
    Regards,
    HR user

    Yes, the Report is
    S_AHR_61016493-Organizational Structure-Organizational Structure
    Select the first line and press F8

  • How to Restrict Creation of Infotype Record for Certain Org Units?

    Dear All,
    Requirement:
    Org Unit 1 does not have overtime. Even the employee works overtime, they will not get overtime compensation.
    One of the option is to disallow the creation of IT2005's record for all the employees in Org Unit 1.
    Is it possible to do this through standard SAP?
    Thanks a lot.

    Hi,
    The best way to control this will be with Authorizations so that people belonging to one Org.unit should not have IT2005 mantainence.
    Let me know if u have any concerns on this.
    Thanks
    Swati

  • Org Chart 3.0 - Print button on Org Unit's Profile not working

    Hi,
    In Org Chart, after we click on the Org Unit, then the details will be displayed on the right panel.
    We clicked on the Action button on the right panel, and click on the Org Unit Profile, a new window will be opened.
    Now, clicked on the small printer button on the top right corner.
    It will opened a new window with print preview to print that profile page.
    However, the print preview is empty, and when we printed this out, we get a blank page.
    CDS.log
    ERROR com.nakisa.Logger  - PrintPreview.ascx : createPrintPages : Could not load preview. No HTML pages were found
    INFO  com.nakisa.Logger  - Invoking action:setCss [<link rel="stylesheet" type="text/css" href="../_Themes/Buttons.css"/><link rel="stylesheet" type="text/css" href="../_Themes/orgChartTheme.css"/><link rel="stylesheet" type="text/css" href="../_Themes/OrgChartLines.css"/><style>.showPrintSectionBox{display:block;}.hidePrintSectionBox{display:none;}</style><link rel="stylesheet" type="text/css" href="../_Themes/NOMS_Style1.css" />]. For processor Printing. Against controller Printing
    INFO  com.nakisa.Logger  - setCss on Printing took: 0ms
    INFO  com.nakisa.Logger  - Invoking action:updatezoomlevels [undefined]. For processor UpdateSettings. Against controller UpdateSettings
    ERROR com.nakisa.Logger  - java.lang.NumberFormatException: For input string: "undefined"
    INFO  com.nakisa.Logger  - updatezoomlevels on UpdateSettings took: 1ms
    ERROR com.nakisa.Logger  - PrintPreview.ascx : createPrintPages : Could not load preview. No HTML pages were found
    INFO  com.nakisa.Logger  - Invoking action:setCss [<link rel="stylesheet" type="text/css" href="../_Themes/Buttons.css"/><link rel="stylesheet" type="text/css" href="../_Themes/orgChartTheme.css"/><link rel="stylesheet" type="text/css" href="../_Themes/OrgChartLines.css"/><style>.showPrintSectionBox{display:block;}.hidePrintSectionBox{display:none;}</style><link rel="stylesheet" type="text/css" href="../_Themes/NOMS_Style1.css" />]. For processor Printing. Against controller Printing
    INFO  com.nakisa.Logger  - setCss on Printing took: 0ms
    INFO  com.nakisa.Logger  - Invoking action:updatezoomlevels [undefined]. For processor UpdateSettings. Against controller UpdateSettings
    ERROR com.nakisa.Logger  - java.lang.NumberFormatException: For input string: "undefined"
    INFO  com.nakisa.Logger  - updatezoomlevels on UpdateSettings took: 0ms
    This same problem happens on Position's Profile.
    How do we fix this print problem?

    Hi Luke,
    In General Settings, I have defined Company Title, URL, and Logo.
    Together with Allow Switching Between Modes, Set Standard Mode as Default, and Enable Effective Dating are enabled.
    In Print preferences, Size is set to A4, Landscape, CM. The rest are all unchecked and Export settings are all enabled.
    Am I missing some setting to cause the error?
    Regarding the file SettingsResources.xml, it's encrypted in our .delta folder but it's decrypted in Admin_Config\SAP_DB2

  • Function Module to show all jobs in that Org Unit.

    Does any one know is there any Function Module which gives all the jobs that comes under that Org Unit. for example if org unit 10 has 2 Sub Org Units(11 and 12) and 3 jobs(20, 21 and 22) under it. and the Sub Org Unit 11 and 12 has 1 job each( 30 and 40). When you run for org unit 10 it should give all 5 jobs (20, 21, 22, 30 and 40).

    Hi Fayyaz
    Well you use a FM RH_READ_INFTY_1001 to discover the relationships between an ORG Unit and Jobs.
    Alternative, you can write a simple query to extract data from HRP1001 to find the jobs under an Org Unit. Because Jobs are related to an Org Unit and this relationship is stored in Infotype 1001/HRP1001.
    Reward Points, If helpful.
    Regards
    Waz

  • BADI or Enhancement Spot while assigning BP to a Org Unit

    Hi,
    I have a requirement of changing the BP address while assigning the BP to a Org Unit in PPOMA_CRM. Is there any BADI or Enhancement Spot which can be used for this purpose.
    Thanks,
    Ravi G

    Hi Ravi
    Regarding this thread I want a help from your side if you can help me please.
    I have to put some validation for the assigned employee and the position under which the employee is beeing assigned.
    Is there any badi or Enhancement spot that can resolve my problem.
    the validation will be done as soon as we select the employee that will be assigned to the position and press the ENTER.
    It is done before SAVE.
    Best Regards
    Saurabh

Maybe you are looking for