HR OrgStructure replication to EBP, again

Hello all,
as I did not done this for now can somebody explain what I can get from the replicated data from the Hr system.
I am mostly concerned about assigment of the attributes to the user (cost centre, delivery address)? Can system take delivery address from the user data (for desktop delivery) or this shoould be created manually via web interface and than assigned via ppoma_bbp as default?
TIA
Gordan

Hello Yan,
First of all basic data:
EBP 5.0, CCM 2.0, HR 4.7, R/3 4.7, classic scenario
yes, each user have different delivery address.
In user master data there is option to enter not only address of the company but also data about building, floor and room number, also exact telephone and e-mail. This information should be the full delivery address. If I create address manually via web interface I can have this information on backend PO.
This data normally exist in HR system and I would like to have it as delivery address.
TIA
Gordan

Similar Messages

Vendor Master replication from EBP and MM to SUS

Hi !
We would be replicating Vendors from R/3 as well as from EBP to SUS. I believe that there is certain configuration to check duplication of Vendors and also to assign a single business partner ID even if a Vendor is replicated both from EBP as well as from MM. Can anyone thro some light on this & the procedure...
Thanks

Hi,
For the Vedor Maste replication from EBP and MM to SUS,
U need to maintain the proper RFC conncection between R/3, EBP SUS and XI as a middleware.
U can transfer the Vendor by using the T.Code - BBPGETVD.
U can transfer vendor to SUS using
transaction BD14 with message type Z_CREMAS_SUSMM as
SAP suggested.
Your error due to incorrect mapping in Integration
Directory of XI.Kindly check the Interface
determination for message type Z_CREMAS_SUSMM.
Please award the points for the help.
BR,
Vijay Mittal

HR Replication to EBP to get adress

Hi,
did anyone installed ALE Connection between HR and EBP to transfer also adresses which can be used as ship to adress in EBP?
Thanks
Ralf

Hello Yan,
First of all basic data:
EBP 5.0, CCM 2.0, HR 4.7, R/3 4.7, classic scenario
yes, each user have different delivery address.
In user master data there is option to enter not only address of the company but also data about building, floor and room number, also exact telephone and e-mail. This information should be the full delivery address. If I create address manually via web interface I can have this information on backend PO.
This data normally exist in HR system and I would like to have it as delivery address.
TIA
Gordan

Attributes replication In EBP

HI gurus,
I have maintained all the attributes in SRM organisation model .But i could not replicate in the Portal .pls give me solution for that.BBP_READ_ATTRIBUTES shows the maintained attributes.

Hi Kalai
userid_p = GIVE USER ID as input
bbp_get_attributes_at03 - FUnction module
o/p - all attributes in it_attr_p table - Hope you might get some list of attributes.
update are you getting o/p or not?
regards
Muthu

SRM , HR replication and default address

Hi,
HR data is not with address (e.g Organization ). I would like to 'default' an address when I replicate the Organizations.
How do I do it ?
Please help
With regards,
Pranav

Hi
Which SRM / HR system versions are you using ?
Please go through this ->
Default address for all organization unit
Hoe to fill "Main address" subtype automatically
Re: Delivery address created in ADRC table but not visible
HR OrgStructure replication to EBP, again
Please revert in the event of any query.
Regards
- Atul

HR WITH SRM

Hi Gurus,
Can some one please explain the PROS / CONS of using HR replication for SRM.
any Blogs , documentation regarding this issue would be helpfull...
I will reward points.
please send any documents to the e_mail id specified in my user profile...
Edited by: khan voyalpad usman on Apr 11, 2008 5:26 PM

Hello,
Please check SAP note:- 1148817
Please check link::
http://help.sap.com/saphelp_srm2007/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
Default address for all organization unit
Hoe to fill "Main address" subtype automatically
Re: Delivery address created in ADRC table but not visible
HR OrgStructure replication to EBP, again
I hope this will help.
Thanks and regards,
Gaurav

What is the best way to drop and recreate a Primary Key in the Replication Table?

I have a requirement to drop and recreate a primary key in a table which is part of Transaction replication. What is the best way to fo it other than remove it from replication and add again?
Thanks
Swapna

Hi Swapna,
Unfortunately you cannot drop columns used in a primary key from articles in transactional replication. This is covered in
Make Schema Changes on Publication Databases:
You cannot drop columns used in a primary key from articles in transactional publications, because they are used by replication.
You will need to drop the article from the publication, drop and recreate the primary key, and add the article back into the publication.
To avoid having to send a snapshot down to the subscriber(s), you could specify the option 'replication support only' for the subscription. This would require the primary key be modified at the subscriber as well prior to adding the article back in
and should be done during a maintenance window when no activity is occurring on the published tables.
I suggest testing this out in your test environment first, prior to deploying to production.
Brandon Williams (blog |
linkedin)

Can't stop oracle replication without affecting existing table...

Hi All,
I am facing some problem with oracle replication set up. I have a replication set up already running fine. There is a table called Emp_temp in the replication group which is in ASYNCHRONOUS mode(replicating data for every 15 min). My application is writing data into this table which is in primary server (there are only two servers in the set up i.e. primary and secondary).
I want to stop the replication but my application should keep on writing to Emp_temp table even after replication stopped. But when I stopped the replication (through oemapp GUI) my application is throwing errors stating that it could not commit to that table. Can anyone tell me how to gracefully stop the replication? Is there any way even after stopping the replication application can continue writing to the Emp_temp table?
My application talks to the Oracle using OCI.
Error in my application log is: "Error ORA-23326: object group "PUBLIC"."ASYNCH" is quiesced"
Oracle Version using: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
OS: Solaris 10
Your early reply is highly appreciated
Thanks in advance.
Regards,
Iqbal

Hello
Yes, breaking the PUSH job would be the only solution. In multimaster replication the changes are applied on the remote site through the PUSH job hence you should mark this job as BROKEN to stop the replication.
If you QUIESCE (or SUSPEND) the replication group via OEM, then it would not allow any DML changes to the tables in the replication group. Hence you should break the PUSH job instead of SUSPENDing the Replication Group.
Again, you should re-enable the PUSH job at the earliest else the base queues for replication would grow very fast in a high OLTP system. Once these queues have grown considerably then that could raise performance problems with the PUSH job.
Hope this helps.
Thanks,
Rijesh

Replication DS6.2 - DS5.2 stops working after some time

Hello!
After weeks of unsuccessfully trying to solve a replication problem, I hope that someone of this forum can give me a hint.
I have 2 masters DS5.2 and two masters DS6.2.
Replication is working fine for some days. E.g. last time the replication was working until 29.11.
But at some point the replication stops working and I get the following errors in the errors log:
[28/Nov/2007:10:51:16 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d3d84000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:12:48:09 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d58e9000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:19:06:55 +0100] - INFO: 29398 entries in the directory database.
[28/Nov/2007:19:06:55 +0100] - INFO: add:107, modify:0, modrdn:0, search:3651, delete:0, compare:0, bind:2763 since startup.
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:34:05 +0100] - WARNING<20805> - Backend Database - conn=328186 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:45:46 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
Since the replication was not working I had to initialize the DS6 masters again:
[29/Nov/2007:16:03:59 +0100] - import hvb: Index buffering enabled with bucket size 76
[29/Nov/2007:16:03:59 +0100] - import hvb: Beginning import job...
[29/Nov/2007:16:04:20 +0100] - import hvb: Processed 14166 entries -- average rate 674.3/sec, recent rate 674.2/sec, hit ratio 0%
[29/Nov/2007:16:04:41 +0100] - import hvb: Processed 22598 entries -- average rate 525.5/sec, recent rate 525.5/sec, hit ratio 100%
[29/Nov/2007:16:05:03 +0100] - import hvb: Processed 31591 entries -- average rate 493.6/sec, recent rate 405.4/sec, hit ratio 100%
[29/Nov/2007:16:05:05 +0100] - import hvb: Workers finished; cleaning up...
[29/Nov/2007:16:05:17 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replica (dc=hvb,dc=de) has been initialized by total protocol
as full replica
[29/Nov/2007:16:06:56 +0100] - WARNING<20805> - Backend Database - conn=334334 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed92e00001a360000
I tried to change a password. But the replication failed again and since than the replication is working again.
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
But I'm sure that after some days there will be a problem again.
Sometime there are also the errors:
[29/Nov/2007:16:27:05 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:05 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:06 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:06 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:06 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
I tried to reproduce the problem.
At the moment everything works fine and I can do many changes.
But I know that there is somewhere a problem and the replication will stop working again in the next days.
Can you give any advise?
Regards,
Beate
Edited by: 72716 on Nov 30, 2007 10:05 AM

Here is an explanation of the failure:
1. Prioritized replication was introduced with DS6.0;
2. When a suffix at a DS6 instance is initialized from a DS5 instance, and then an operation is performed at the DS6 instance that uses prioritized replication, replication fails;
3. By default, password policy uses prioritized replication to propagate auth-failure-lockout state updates (e.g., adding a pwdFailureTime attribute value on a failed bind attempt);
A work-around:
Disable DS6 supplying auth-failure lockout state using prioritized replication. In any password policy having auth-failure-lockout enabled, set
pwdIsLockoutPrioritized:FALSE
Note that DS6 enables prioritized lockout by default, in particular, it enables this feature when migrating a password policy received from a DS5 instance. Hence, for this workaround to be effective, the prioritized lockout feature must be disabled in any DS6 password policy that has auth-failure lockout enabled, which could include:
1. The default password policy at any DS6 instance (cn=password policy,cn=config);
2. Any password policy originating at a DS5 instance, including those in data imported into a DS6 instance, received via replication total update initialization, or added at the DS5 instance subsequent to the DS6 instance initialization;
3. Any password policy added to a DS6 instance.
Additionally, do not set any prioritized replication rules for other attributes.
It is possible the bug can still be triggered in the case of a DS6-only topology that was initialized from DS5 data.
Contact Sun support for the status of a fix for the bug. The CR is 6645742.

Site link failed

Hi All,
We have a client with one CAS & 4 primary sites (All the sites are SCCM 2012 R2) because of some maintenance work one of the primary site was down for few hours & now in site hierarchy the link shows as failed. when we hover over the link it
shows that the Global data replication between the CAS & the Primary site is failing.
What we have tried :-
1. Run the replication link analyzer - Its unable to resolve the issue & just shows the names of replication groups which are failing.
2. Run the SPdiagdrs command on primary site DB - This shows the Global replication groups which are failing & are not active.
3. Run the Update RCM_DRSInitilazationTracking set initializationstatus=7 where ReplicationGroup = "Group Name" - To reinitialize the replication.
4. configuration data.pub => Drop these on Primary server RCM.BOX - As mentioned
here. This solved the issue initially but the replication was failed again after some time.
5. rcmctrl.log on CAS shows this error :-
Calling BCP out with SELECT ID, SYSRESUSEID, SITENUMBER, NAME, VALUE~FROM SC_SysResUse_PropertyList, C:\Program Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\SC_SysResUse_PropertyList.bcp, C:\Program Files\Microsoft
Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\bcpErrors.errors.
Calling BCP out with SELECT ID, SITENUMBER, USERNAME, PASSWORD, AVAILABILITY~FROM SC_UserAccount, C:\Program Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\SC_UserAccount.bcp, C:\Program Files\Microsoft Configuration
Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\bcpErrors.errors.
Calling BCP out with SELECT ID, USERACCOUNTID, SITENUMBER, NAME, VALUE1, VALUE2, VALUE3~FROM SC_UserAccount_Property, C:\Program Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\SC_UserAccount_Property.bcp, C:\Program
Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\bcpErrors.errors.
Calling BCP out with SELECT ID, USERACCOUNTID, SITENUMBER, NAME, VALUE~FROM SC_UserAccount_PropertyList, C:\Program Files\Microsoft Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\SC_UserAccount_PropertyList.bcp, C:\Program Files\Microsoft
Configuration Manager\inboxes\rcm.box\40075d72-d82a-4e1e-9944-2afcadf5813f\bcpErrors.errors.
Need help on this, I can see the error's coming but need suggestions for troubleshooting this issue.
Thanks,
Pranay.

Hi,
Any update? Could you find any helpful information in the rcmctrl.log?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SRM PO not triggering XML Output to SUS

Hi folks,
We are using SRM 5.0 in conjunction with SUS. When we create POs in EBP they are not transferring to SUS. We had them working about 5 months ago but the project was then put on hold and since then no new POs are transferring to SUS from EBP.
Old POs can still be transferred to SUS and responses can also be transferred back from SUS to EBP. Vendor replication from EBP to SUS is also possible.
The problem is simply with new POs. No Document Output appears in the PO.
Any suggestions would be greatly appreciated.
Thanks and regards
Pat
Edited by: Pat Curran on Aug 26, 2009 7:46 PM
Edited by: Pat Curran on Aug 27, 2009 6:35 PM
We discovered the cause of the issue. Between when the system was working previously and now, OSS Note 883693 (PO Output activation) was applied. This note turned off PO Output inSRM

Hi Rao
some thing makes default medium as spaces.
Note 1072367 - No output medium identified error even if medium selected.
A Purchase Order is created with a vendor containing no default medium specified in the vendor master data. Now, even after selecting a valid output medium, the error message 'No output medium selected' does not go off
check with technical resource ? is it really internally makes SPACES (empty)
check any logic in your smartform.
if yu have time create one OSS mesaage too.
muthu

Vendor and Contract Hierarchy

I have a question that is about making a link with Vendor and Contract Hierarchy. First it is not clear how I can set the Vendor Hierarchy, I want to upload vendors from R/3 and for that I can create a vendor group and then upload but then how I can make a Vendor Hierarchy and I am not sure that I understand the correct thing about Vendor Hierarchy?
Thanks in advance if you clarify this on going issue in my mind.
Best Regards,
#Bill J.

Hi Bill,
For using Product Cat.\Vendor\Contract hierarchy activate follwing before any data replication in EBP .
Spro->SRM Server->Cross. App.->Activate Hierarchies for Product Categories, Vendors, and Contract .
Regards,
Sachin S M

Vendor registration

Hi experts
After vendor replication from EBP to SUS an e-mail notification is sent to vendor with a URL, USER and Pass, when vendor goes to URL and do the registration and try to create an error occur, CALL FUNCTION NOR EXECUTABLE, INCORRECT PARAMETER
Someone knows what is the solution for it?
Thanks
Nilson

Hi
Did you replicate the company code from Txn BBP_SUS_BP_ADM ? Did you see the option to replicate company code ? One you replicate the company code, it inserts a node in PPOMA_BBP. You can check the companies there. You do not maintain them directly.
<b>See related links -></b>
Note 361829 EBP (BBP2.0C): Business partner <-> vendor mapping
Urgent - SUS with multiple company scenario
Urgent - SUS with multiple company scenario
Re: URL for vendor self registration without SUS
Send vendor to SUS (EBP-SUS)
Re: Vendor replication in MM-EBP-SUS Scenario
User's vendor in SUS
SUS - Error with duplicated company
In SUS Link between registered User ID and Business Partner (Vendor) Number
Re: Vendor replication to SUS
"Business Partner Does Not Exist" SUS admin user registration
Re: Clarifications on EBP-SUS and MM-SUS Scenario
Hope this will definitely . Do let me know.
Regards
- Atul

Frequently transfering databases between MS SQL and Oracle

Hello all,
I am looking for a solution to easily, efficiently and be able to migrate/transfer databases between MS SQL and Oracle frequently.
I need to be able to replicate a databases on Ms SQL and Oracle for testing purposes. I will need to do this on frequent basis - almost once a week.
Please suggest what would be the best way.
Thanks in advance.

Hi Justin,
You have guessed it right to a great extend. Yes dont actually need to develop, rather need to test an application that supports SQL and Oracle databases. Now when testing the application its obviously vital to create proper systematic test data. This usually takes a lot of time and effort from the testing team/team-member. So, yes what I need to do is create the test data on one database(may it be SQL or Oracle) and migrate/transfer the data into the database on another server( ie. SQL to Oracle or Oracle to SQL).
So,
Are you developing a product that works against both SQL Server and Oracle and trying to synchonize development efforts?Yes, thats correct to extend, I need to test an application against both the servers, as it supports both types of databases, and try to reduce the test setup efforts (literally double the amount) that go in after manual creating same data on each type of database.
Are you trying to replicate structural changes between systems?I am not 100% sure, what you mean by this. But whats important and enough for me is to replicate the data. It would not be a lot of work to run the scripts and create empty schema objects.
Are you trying to replicate data changes between systems? The fact that you're only doing this weekly suggests that you're not working in a traditional replication environment.Yes, again as I mentioned above. It would be sufficient for me to just get a copy of the initial dataset. And then replicating changes to it would not be that important. However, if I can achieve a solution to this, I can by all means create a new database on the one server (SQL or Oracle) and take the data-set of the most recent/correct changes and replicate it on the other type of server as and when needed.
No - this is not a traditional replicating environment. I say weekly, because it is usually once in a week or forthnight that someone from the team will need to spent time to manually copy the test-data onto the another type of server in order to run the same testcases on two types of servers.
How do you handle conflicts (i.e. if I modify a row in both systems, which modification wins)? This is not really a problem in my scenario, as I only need to be able to transfer the data across to the different server and forget about the two databases actually being in-sync.
I have also, looked at DTS for a possible solution on SQL, however it seems highly un-realistic, having to map somewhere like 250 tables from the a drop-down list, only because the two database servers use different cases to represent tables internals. So, table 'Table' in my application's SQL database is called 'TABLE' is my applications Oracle database. DTS is highly inefficient in dealing with this. Also, having 250 tables move makes this a bit of a pain.
Thank you Justin for your response; I highly appreciate your inputs.
Regards, Nisarg

SLT Scenario in question: ECC - SLT- HANA DB

Hello Team,
Issue : I need propose a scenario where we need to recover the data in a table in case of any failure occurs (where point in time recovery is not possible) or there is mismatch in Target database (HANA) when compared to ECC source system.
The following are key constraints:
Re-Replicate the table by stopping the replication and starting again is not an option.
Data from BW is being replicated on real time and customer has mission critical reporting which does not allow downtime.
(in case of re-conciliation issue 1 hr downtime may be allowed as exception)
I have reviewed the documentation available and did not find any clear solution (steps) for recovery. How can we recover in the case of above scenario where replicating the tables again is not an option?
Please provide your viewpoint as this will be helpful in fast tracking the solution.
Regards,
Hemanth Aluri

Hi,
If you cannot recover to the last point in time, you can use the
replication logging feature that is available with the DMIS 2011 SP6.
Replication logging can be switched on for all tables of a
complete configurations via the checkbox ‘Activate Replication Logging’ at
the time when the configuration is created.
The SLT Application Operation Guide describes:
If you need to activate replication logging for an
existing configuration, or if you want to deactivate replication logging, you
need to adjust some entries in the SAP LT Replication Server configuration
tables.
You can also activate or deactivate replication
logging for specific tables if required.
By default the data retention period is 3 days, you
can change this either generally per configuration or individually per table
More details in chapter 6 of the Application Operations Guide: Application
Operations Guide
Best,
Tobias

HR OrgStructure replication to EBP, again

Similar Messages

Maybe you are looking for