HR PA and Planning (PD profile) changes not updating auth profiles of users

PROBLEM:
We are on ERP version 6 since 2008. We started experiencing this problem December last year and now it is all over our system. As soon as employees are transferred or new appointments are made in HR on PA or if the PD profile is changed in planning the changes cannot be seen by the user in their auth profile. The user can literally not see the newly appointed employee on the org structure or even newly created org units and positions are not visible. When RE_RHAUTH00 is run on the user name the update indicates that the changes (new employee and new org unit) is linked.
The following updates run every night: RHPROFL0_DAILY_UPDATE and RHUATUPD_NEW. I have also run PFUD during the day to make sure all updates go through. We have also "played" with some profiles with PD profile changes but it is as if the profile remains completely static. We have looked for personnel lists and deleted them to no avail. Our Basis administrator has cleared the buffer for us and has run report RSUSR405 that did not do anything. We have searched through notes on Support packages and have just loaded and tested support pack 46 to 53. The only work around seems to be to delete the user and create a new user and then it seems to easily accept new changes.

Hi,
Yes, please make it scheduled background job. This is normal procedure.
Define periodicity on your business needs: some run it every night, some every hour.
Cheers

Similar Messages

Play count and last played features do not update

The play count and last played features do not update when syncing my 7th gen nano but still operate wit my 5th gen nano. I cannot find any way of changing the preferences to do this with the iPod connected to the computer. Any ideas?Play count

I am having the EXACT same problem with my Ipod! I still have yet to figure out how to fix it, but my brother (who knows everything about ipods), has yet to figure out what is making this happen.

HT204073 I had purchase one year protection plan but it is not updated till today how would I updated iPhone warranty my self

I had purchase one year protection plan but it is not updated till today how would I updated iPhone warranty my self

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
maybe this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

TS1702 I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

Well, to paraphrase the old line, "What're you gonna believe, that email or your own lying eyes?"
The first thing I'd recommend trying is to power down your iPad (press & hold Sleep/Wake until the red OFF slider appears, then slide it to shut down), and then boot it back up and try again. You're resetting a bunch of state signals by doing that and this simple action (the first of a series recommended by Apple in your Users Guide) will quite often clear up these sorts of problems.

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again

PreludeCC and PRemiere Pro CC will not update error: " log Transport 2"

PreludeCC and PRemiere Pro CC will not update . update gets to 62% and then quits with the following error code "Log Transport 2"
System
OS 10.9
MacPro 3,1
All other apps do update.

HI Steve & Perry,
Have you tried restarting the machine and applying the updates again ? If yes, are you still getting the same error message ? If yes , could you please share a screen shot of the error that you get ?
Cheers,
Kartikay Sharma

Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.

Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.

Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Documents that are park in FBV0 do not update with the new user name when

Hi,
I need to find out why documents that are park in FBV0 do not update with the new user name when any changes are made. Also when we park using MIR7 and make changes to the documents at a later time the document updates with the new users name.
Requesting you to please suggest what could be the reason.
Earliest reply will be highly appreciated,
With regards,
Rj

Hi,
I have checked this in system. I posted one Parked invoice using T.code FV60 and there i appeared my name because i created. But after some time one of my collegue changed the reference and text field with his login i.d. But still in the invoice it is showing as my name whereas if we go to the environmnet, there in the changes we can see what are the changes done and it is appearing my collegues user i.d. But in the main invoice it is still appearing my name.
Regards,
Rj.

SHD0 and VA01 transaction variant: Changes not showing in Test mode

Hi,
I am trying to create a transaction variant using SHD0 for VA01 and VA02 that will grey out the PLTYP field in screens 4301 and 4900.
Everytime I go through the process and exit and save it looks fine, but when I test the variant, the fields are still editable, even though my variant shows them listed as Output Only checked off for the aforementioned screens
I am using the following:
T_Code for variant: VA01
Variant: copy of BUS2032 renamed Z_BUS2032_KPW.
screens to be affected : 4301 and 4900.
I do not want to override the default variant. I am currently in R/3 4.6c.
Any help other than links to the SAP help website (which I have exhausted) would be greatly appreciated.
Thanks,
Kevin Webb
www.innovapost.com

Hello Sai P,
HELP!
I have a similar situation: VA01 running standard and ZVA01, with a hidden field, once I assigned NO_VARIANT to the Order type ZVPV, it is working as desired. However, one strange thing is happening... when I enter ZVA01 and assign the order type ZVPV (which has NO_VARIANT at VOV8) I enter and the field is hidden this all good, then I go back to the screen were the order type is assigned and then I choose another order type ZTA (which has variant in VOV8 in blank) and the hidden field shows, all good as well. However, when I go back again to the order type screen (without going back to the menu screen) and choose again ZVPV and enter the field is showing. Any idea?
Regards.

Update of Planning Start Date does not update macros

I have written a program to update the planning start date in a planning book using function /SAPAPO/MSDP_PB_SAVE_DVIEW_TAB. I have included this in a process chain. The update is immediately followed by a /SAPAPO/TS_BATCH_RUN variant that runs a macro in the updated book. The macro uses planning start date. The issue is that the macro does not appear to have been updated with the new planning start date. I experimented with using transaction Define Planning Book (/SAPAPO/SDP8B) whilst also in Macro Workbench on another session. If I change the planning start date this is also not reflected in the macro unless I come out of the Macro Workbench completely and fo back in. This appears to be a buffereing issue.
Does anyone know if there is a way to force the macros to be updated? Otherwise I may have to resort to just putting a delay in the chain and hoping the maco will be updated before it is run.
Thanks
Edited by: Peter Phillips on Mar 19, 2010 11:32 AM

Hello Mani,
We have planning books used to calculate demand for newspapers at weekends. At weekends the papers contain printed colour magazines. These have to be ordered in advance. The macros that we run use planning start date to claculate the quntity of magazines required for the next weekend. The business also needs to do advanced calculation for the next two weekends. This requires an update to the planning start date to change the basis for the macros. We do not wish to write separate macros for each weekend as there are quite a few of them. We are trying to keep it as simple as possible.
Regards
Peter

R/3 Vendor changes not updated in to SRM

Hi,
1) Vendor changed on 01/05/2009 in R/3 (Blocked) but not updated in to SRM,
2) User created shopping cart for this vendor on 20/08/2009 and approved PO gone in to Error
Error:21.08.2009 16:55:28 PO 4710113629: No instance of object type PurchaseOrder has been created. External reference:
3) 26/08/2009 R/3 vendor is changed in R/3 i.e street changed
4) SRM vendor updated with all changes i.e vendor block also which changed in R/3 on 01/05/2009
I am struggling to find why it is not updated on 01/05/2009 and updated on 26/08/2009, there is no workflow also
and
what to do for error PO we dont want to use this vendor
Thx
Jai

Hi,
Please check the SLG1 log for object BBPUPDVD and BBP_VENDOR_SYNC.
You see what is updated in the past.
Regards,
Masa

DreamWeaver Template change not updating children webpages?

Hi Group,
Sorry for my newbie question here.
I loaded an HTML webpage, and saved it out as a DreamWeaver Template file.
I then created webpages from the template file (( File - New - Page From Template - Site - Template), and made sure that the "Update Page when Template Changes" check box was selected/checked.
I then created several chldren webpages, and saved them as .html files.
I decided to change the navbar system - part of the uneditiabel region in the template - by opening the template file and edit-ing that file, and then saving it as the same DreamWeaver template file.
However, the webpages did Not Update to reflect the navbar changes in the template fle !??!???
Can someone tell me what I'm doing wrong?
I believe it is something that I'm doing incorrectly with DreamWeaver ..
Here is the HTML if anyone is interested.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>

<title>CNC Joe's WorkShop - - Home Page </title>

<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
   <link href="../style.css" rel="stylesheet" type="text/css" media="screen" />

<meta http-equiv="X-UA-Compatible" content="IE=8" />

<link rel="stylesheet" type="text/css" media="screen,projection" href="../style.css" />
</head>

<body>
<div id="wrapper">
<a name="top"></a>
<a href="index.html" target="_self" title="CNC-Joe's Home Page" >
<img src="../joesworkshoplogo.gif" width="770px" height="300px" alt="CNC Joe's WorkShop - Home Page" />
</a>



<div class="mainmenu">
<ul>
      <li class="li_nc"><a href="index.html" target="_self" >Home</a></li>
      <li class="li_hc"><a href="cad.html" target="_self" >CAD</a><ul class="ul_ch">
         <li class="li_nc"><a href="cad_intellicad.html" target="_self" >IntelliCAD</a></li>
         <li class="li_nc"><a href="cad_draftsight.html" target="_self" >DraftSight</a></li>
         <li class="li_nc"><a href="cad_progesoft.html" target="_self" >Progesoft</a></li>
      </ul></li>
      <li class="li_hc"><a href="cam_html" target="_self" >CAM</a><ul class="ul_ch">
         <li class="li_nc"><a href="cam_mach3.html" target="_self" >Mach3</a></li>
         <li class="li_nc"><a href="cam_vcarve.html" target="_self" >V-Carve</a></li>
         <li class="li_nc"><a href="cam_cut3d.html" target="_self" >Cut 3D</a></li>
         <li class="li_nc"><a href="cam_bobcadcam.html" target="_self" >Bob-CAD-CAM</a></li>
         <li class="li_nc"><a href="cam_meshcam.html" target="_self" >Mesh CAM</a></li>
         <li class="li_nc"><a href="cam_deskcnc.html" target="_self" >Desk CNC</a></li>
      </ul></li>
      <li class="li_hc"><a href="projects.html" target="_self" >Projects</a><ul class="ul_ch">
         <li class="li_nc"><a href="projects_zzeroplate.html" target="_self" >Z Zero Plate</a></li>
         <li class="li_nc"><a href="projects_x0y0edgefinder.html" target="_self" >X0-Y0 Edge Finder</a></li>
         <li class="li_nc"><a href="projects_digitizingtouchprobe.html" target="_self" >Digitizing Touch Probe</a></li>
         <li class="li_nc"><a href="projects_millwebcam.html" target="_self" >Mill Web CAM</a></li>
         <li class="li_nc"><a href="projects_laseredgefinder.html" target="_self" >Laser Pointer Edge Finder</a></li>
         <li class="li_nc"><a href="projects_davidlaserscanner.html" target="_self" >David Laser Scanner</a></li>
      </ul></li>
      <li class="li_hc"><a href="reference.html" target="_self" >Reference</a><ul class="ul_ch">
         <li class="li_nc"><a href="ref_gcodes.html" target="_self" >G-codes</a></li>
         <li class="li_nc"><a href="ref_nema.html" target="_self" >NEMA Motor Info</a></li>
         <li class="li_nc"><a href="ref_vbearings.html" target="_self" >V-Bearings</a></li>
         <li class="li_nc"><a href="ref_linearguides.html" target="_self" >Linear Guides</a></li>
      </ul></li>
      <li class="li_hc"><a href="offtopictopics.html" target="_self" >Off-Topic Topics</a><ul class="ul_ch">
         <li class="li_nc"><a href="ott_backyardfoundry.html" target="_self" >BackYard Foundry</a></li>
         <li class="li_nc"><a href="ott_blacksmithing.html" target="_self" >BlackSmithing</a></li>
      </ul></li>
      <li class="li_nc"><a href="links.html" target="_self" >Links</a></li>
      <li class="li_nc"><a href="contact.html" target="_self" >Contact</a></li>
</ul>
</div>





<h2>Projects: Digitizing Touch Probe:</h2>
<ul>
<li> </li>
    <li> </li>
    <li> </li>
    <li> </li>
    <li> </li>
    <li> </li>
    <li> </li>
</ul>





<br />
<p><a href="#top" >Back To Top...</a></p>



<div id="footer">
<hr />
<p>
<a href="http://validator.w3.org/check?uri=referer">
<img class="logos" src="http://www.w3.org/Icons/valid-xhtml10" alt="Valid XHTML 1.0 Transitional" height="31" width="88" /></a>
<a href="http://jigsaw.w3.org/css-validator/check/referer">
   <img style="border:0;width:88px;height:31px"
    class="logos" src="http://jigsaw.w3.org/css-validator/images/vcss"
    alt="Valid CSS!" />
</a>
</p>
<h5><strong><i>
   This website is for educational purposes only. Any resemblance to any person - living or dead - is purely coincidental
</i></strong></h5>
</div>
</div>
</body>
</html>

Additional Info:
No -I haven't been able to get the DW Template feature to work on other sites - this is my first application of it to a website (actually it's the whole reason for getting DreamWeaver... I know it works, I know that I'm doing something wrong.. I just don't know what it is...)
All the .HTML files (index.html, cad.html, cam.html, etc. etc.) are in the website's root directory.
The Template file is in its own sub-directory folder named "Templates".
Right now even the .css file is in the root directory....
Thank You for trying to help me - I greatly appreciate it.
Joe

Firefox seems to download updates correctly, but it never applies them. When I try to update manually, Firefox closes and reopens, but it's not updated.

This basically means that I have to watch for updates and update Firefox by re-downloading it from firefox.com each time. It's like the "Apply Update" button mysteriously turned into a "restart Firefox" button.

If there are problems with updating then best is to download the full version and uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 12.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

User Profile email address not updated on Site Collection User Information

Hi All,
Ok here we go....SharePoint 2007 with SSP profile sync not enabled, however I have a few profiles I need to update (email address). This has been completed by editing the user profile in SSP, but when viewing the information via Site Collection >
People & Groups > User Information "Work E-mail" is still showing the old one.
All alerts are still being sent to the old email address, SSP DB UserProfile_Full shows the new email address as per SSP.
Anyone know where else user profile emails are stored which is used by Exchange?
Many Thanks, Roger

As per the following post from GuYuming
http://social.technet.microsoft.com/Forums/sharepoint/en-US/319d5b0e-336a-4815-9ee5-5d1685db867f/how-to-send-sharepoint-alerts-to-users-on-different-domain?forum=sharepointadminlegacy
After the email address in SharePoint user profile is updated to [email protected], you have to wait until
they are synchronized into the user information list in SharePoint site collections so that alert can be sent to that address. For detail, please read http://vspug.com/mirjam/2009/06/17/user-profiles-and-the-user-information-list-or-userinfo-table/ and http://blogs.technet.com/paulpaa/archive/2009/10/01/user-profile-information-not-updated-on-site-collection-s-people-and-group.aspx
--Cheers

HR PA and Planning (PD profile) changes not updating auth profiles of users

Similar Messages

Maybe you are looking for