HR payee type selection is not allowed in production mode

Hi All,
Does anyone has clue with this error 'HR payee type selection is not allowed in production mode processing" when i'm creating third party remittance evaluation run (new) PC00_m99_URME. I'm selecting Garnishment & child support payee from drop down as i want to post my garnishment amount through 3PR.
Any response would be needful.
Thanks,
KMM

SAP runs 3rd party remittance eval for a given payroll area / pay period as a whole (i.e. regardless of payee types) when this is run in production mode (i.e. only allows this fields to have values if you run in test mode). Therefore, when run in prod mode, this selection field should not have any values.

Similar Messages

Set type COMM_PR_UNIT is not allowed for product type

Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa Rodríguez

Rosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish

CHECK SELECT-OPTIONS not allowed in ECC6.0

HI,
Obsolete Statement 4.7 version and Ecc 6.0 Version,
CHECK SELECT-OPTIONS not allowed
The construct SELECT-OPTIONS in the statement CHECK is not allowed in ABAP Objects.
Error message in ABAP Objects if the following syntax is used:
CHECK SELECT-OPTIONS.
Correct syntax:
CHECK f IN seltab.
Reason:
This form of the statement CHECK is intended only for use during the event GET during execution of type-1-programs with logical databases. The statement checks whether the content of the work area, which was filled by the logical database for the current GET event, meets the conditions in all the selection tables that are connected with the database table read. The name of the database table is taken statically from the next higher GET statement in the ABAP program. Thus the statement does not make sense outside of an GET event block. However, the previous event concept of the ABAP runtime environment, that is, the previous way of processing logical databases, is not supported by ABAP Objects.
I want the simple example program for Correct syntax .Can any one send me with example program and pinpoint information of the statement.
Regards,
venkat
Moderator message: please search for available information.
Edited by: Thomas Zloch on Jan 8, 2011 10:32 AM

Hey i have the same issue with this FM
Did u find any solution to this..?
plz help me ... urgent..!!

Document type ZD does not allow you to assign to object MARA

hi ppl,
I have created a Z document type.but its not allowing me to assign in mm02.what might be the problem..? its throwing an error message Document type ZD does not allow you to assign to object MARA.

You need to enable object linking to mara on your new document type. Go to Tcode DC10, select the document type and then go to the object links area. Create a new object link for your document type.

I have a full Team subscription to Creative Cloud, but type kit does not allow me to use some fonts. Do I have to pay extra to have more fonts available to me?

I have a full Team subscription to Creative Cloud, but type kit does not allow me to use some fonts. Do I have to pay extra to have more fonts available to me?

Hi drewacg,
I'm sorry that you ran into trouble with this. Are you the administrative contact on your Creative Cloud team subscription? The admin user doesn't receive the same set of services as a full seat, so you will have a Typekit Trial plan instead of the Portfolio plan.
You have the option of upgrading to the Portfolio level, though. If you would like to do that:
1) sign in at https://typekit.com/login with your Adobe ID and password
2) visit typekit.com/plans, and select the "upgrade" option underneath Portfolio
Your Typekit plan upgrade will be billed separately from your Creative Cloud payments. The Portfolio plan is $49.99/year.
I hope that this helps! If you have any questions, please feel free to send your Adobe ID information to [email protected] and we can look into it further for you. Best,
-- liz

Error Addition to stock of material A in storage type 002 is not allowed

Dear all,
I am doing GR for PO in WM. During TO creation I am getting this error Addition to stock of material A in storage type 002 is not allowed. Hence no storage bins can be entered. May I know under what scenarios this type error props up?
Thanks in advance,
Prashanth

Please find the explanation in SAP online help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
SPRO > LE > WM > Master Data > Define Storage Type
Check
- putaway strategy --> V_T3010-STEIN
- addition to existing stock indicastor ---> V_T3010-ZULAG
As you can read in the help, other factoers such as capacity may influence this.
Regards,
Csaba
Edited by: Csaba Szommer on Feb 19, 2010 7:55 AM

ABAP Dictionary type FLTP is not allowed for screen element

Hi Experts
I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
"ABAP Dictionary type FLTP is not allowed for screen element"

Hi,
This is from help
ABAP Dictionary type FLTP is not allowed for screen element
Message no. 37048
Diagnosis
The format of the ABAP Dictionary field is only for use within the ABAP
program and cannot be used in the Screen Painter.
Procedure
The field cannot be used in screens. If you want to output the
information in the field or assign a value to the field from the screen,
you must use an intermediate field with an appropriate format.
Reward points
Regards

HT201493 How do you change the settings for find my friends to use my contacts. When I signed in I selected do not allow iPhone to use my contacts and now all the names are in e mail format.

When I opened the app I selected do not allow, to use my contacts, but now realise I should have allowed it. I have uninstalled and reloaded it, but it will not ask me to use my contacts again. Any ideas as now I see e mail names and not just the persons name.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

Contract Type ZK to PO Type Z006 is not allowed

Hi Seniors,
While trying to create PO with doc type Z006 with ref to contract type ZK, it is showing error like
" Contract Type ZK to PO Type Z006 is not allowed "
If i check in SPRO, PO doc.type has been assigned with PR doc.type only not with contract doc.type and vice versa to contract doc.type to PR doc.type not with PO doc.type. How and where PO doc.type and Contract doc.type will directly link in order to check whether it is maintained or not. kindly advise.
Regards,
JanaMM

>
JanaMM wrote:
> Hi,
>
> Its not STO normal PO only. I am generally asking...if a PO is been created with ref to contract...the doc.type of both PO and contract should have been assigned somewhere i guess. Where that will be ?? kindly clear me plz..
> regards,
> janamm
For checking the document type of contract follow: spro>MM>Purchasing>contract>Define document type, here you will see document types created for contract.
For checking the document type of PO follow: spro>MM>Purchasing>Purchase Order>Define document type, here you will see document types created for PO.
Now to find a link between contract and PO, look up document type of contract LINK PURCHASE REQUISITION option, you will see what PR's can be created relating to a contract. Now look up PO document type with the above procedure, which will tell you which Po document is linked with Contract. SAP Standard Po document type is CONTRACT RELEASE ORDER, but if customized, the name or document type can be different.
Hope I am helpfull.

ME 013 Document type ZEBP is not allowed with doc. category B (Please check

We are creating shopping cart with specific items using XMA catalogue ME013 message comes
Shopping cart 0001008270 (Preq. 2900000012) : ME 013 Document type ZEBP is not allowed with doc. category B (Please check input)
Is it related to PO Document type configuration in R/3!
Document type ZEBP is not in table T160 (SAP Transaction Control) or Do I need to debug the BAPI_PO_CREATE1.

Hi
Which SRM and R/3 versions are you using ?
Some related useful pointers ->
Error: ME 013 Document type ECPO not allowed with doc. c ategory B
Re: Shopping cart contains error
Error: ME 013 Document type ECPO not allowed with doc. c ategory B
Hope this will definitely help. Do let me know.
Regards
- Atul

JITOM error movement type 000 is not allow (check your entry)

Hello experts,
In transaction JIOM i try to do an ACTION, but the system display below error message.
movement type 000 is not allow (check your entry)
Could you please help me this is very urgent..
Regards!!
Hugo

Hello Hugo,
Can you clarify what the functionality of transaction JIOM is? I am assuming that this is your own transaction? Going from previous cases of error L3001 being raised, this is almost always associated with the creation of TO documents, can you confirm this is correct?
Can you check that the Item category is relevent for picking? (Transaction 0VLP)
Regards
Stephen

I accidentally selected "do note allow" Pages access to my photos. Now I can't insert photos. Message says go to settings and select Privacy - but there is no such option in the Settings. Help!

I accidentally selected "do note allow" Pages access to my photos. Now I can't insert photos. Message says go to settings and select Privacy - but there is no such option in the Settings. Help! I want to be able to insert images in documents I create in the Pages app.

Ok - I figured it out myself as soon as I posted this question. I went to my IPad settings - not the Settings in the Pages app. Problem fixed.

InsertSyncBo is not allowed in reset mode ?

Hi guys,
Do you have any idea what can cause this:
com.sap.ip.me.api.smartsync.ModificationNotAllowedException: insertSyncBo is not allowed in reset mode.
at com.sap.ip.me.smartsync.data.SyncBoDataFacadeImpl.insertSyncBo()
It is triggered in MAM, when trying to insert MAM005, the reset transaction probably is not finished ..?
Best Regards,
Lalo

Hi Lalo,
whenever you press the reset button, this causes that the complete persistence is marked for reset. You are right, pressing the button as such does not immediately trigger a communication with the middleware, but from that moment on you can not do any changes on the client - you need to sync first!
Well, the logic behind is: whenever you say, the client reset is necessary, you say as well that the persistence has an error. Whatever the problem is. Any changes, new items, deletions you have done prior to the reset and that you have not synced are lost as well. So be careful with this button!
If you work with MAM on a PDA - a complete refresh of the dataset can take easily up to 30minutes - depending on the PDA model and data volume.
So if you sync one time, then watch MEREP_MON to check if all data is in O-Waiting and then sync again to really get the complete data set - this will help to fix the issue immediately.
Hope this helps!
Regards,
Oliver

The control type xyz is not allowed on this page. The type is not registered as safe.

Hi all,
I have a solution, say My.Solution, I have a project My.Project in that.In that project I have a few features.I added a visual webpart.In the properties of that, I can see that it has a safe control entry for that.I did not rename any namespace or class name.
I just added this webpart to a new feature(which has List Definition and instance) and deployed it.The class name of the visual webpart is Foo and this is in the namespace My.Solution.Foo.
I opened the sharepoint designer and edited the masterpage.I referenced this in masterpage as
<%@ Register TagPrefix="cus" Namespace="My.Solution.Foo" Assembly="My.Solution, Version=1.0.0.0, Culture=neutral, PublicKeyToken=87a45275f2ea36e3" %>
and I added this to the masterpage as
<cus:Foo runat="server" id="customvisualwebpart"/>
After I save in the designer and refresh the browser, I get the error,
The control type 'My.Solution.Foo.Foo' is not allowed on this page. The type is not registered as safe.
I checked the .webpart file and it has the namespace, My.Solution.Foo.Foo. The .spdata has a safecontrol entry too as
<SafeControl Name="SafeControlEntry1" Assembly="$SharePoint.Project.AssemblyFullName$" Namespace="My.Solution.Foo" TypeName="*" IsSafe="true" IsSafeAgainstScript="false" />
The assembly that contains the webpart is alread deployed to the GAC there.
The web.config for that in C:\inetpub\wwwroot\wss\VirtualDirectories\12345 does not have a safe control entry. I don't want to add it there manualy as I don't have access to web.config in prod
Can somebody tell me what is wrong and what I need to do to fix it?

check you package file
http://sharepoint.stackexchange.com/questions/11524/the-type-is-not-registered-as-safe-when-trying-to-add-a-web-part-installed-by
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

Selection Tool not allowing me to move shapes

I need your help.
The Selection Tool is not allowing me to move shapes. It allows me to Resize them by the achor points, but won't let me move them.
Any suggestions?
I use Adobe Illustrator CS5 for Mac OSX.
Thanks!

Try nudging with the up/down arrow keys. Does that work? Does a Move command (Cmd+Shift+M) work?
If so, could it be that Object Selection by Path Only is checked in Selection & Anchor Display prefs? If so, uncheck it.

HR payee type selection is not allowed in production mode

Similar Messages

Maybe you are looking for