HR-PDC interface: Problems in the file name of the downloaded idoc file

I'm currently busy with the HR-PDC interface to EBI-time recording system. The RFC destination to EBI's quality system is working fine but we are experiencing differences in the idoc file name that we are creating in the EBI path. When we send a request to EBI to upload clocks, an idoc (Message Type: HRCC1REQUPTEVEN and IDOC type: HRCC1REQUPTEVEN01 ) is sent to EBI The file name is HRCC1REQUPTEVEN whereas in a previous implementation file name is HRCC1REQUPTEVEN01. The control record information on the outbound idoc are the similiar in terms message types and idoc types sent through to EBI. Have you ever come across this issue in your previous experiences with SASOL's HR-PDC interface. SAP has not changed the IDOC type HRCC1REQUPTEVEN01 since 1998.

can you please also contact IDM support about it?
* http://www.internetdownloadmanager.com/register/new_faq/main.cgi

Similar Messages

How can you keep the file name when using "Download Linked File As..."?

I'm a longtime PC user finally making the transition to Mac. Some of the tasks that seemed so simple in Windows have really stumped me! One of the tasks I do frequently is download files into specific folders. After much looking, I finally found the "Download Linked File As..." option if I right-click on the download link. The problem is, when I choose this option, I lose the file name. I get a window in which I can choose the desired folder, but the filename is always "0". If I want to keep the filename (and I usually do), I have to type it in manually. Is there anyway around this?

You can post a screen shot by clicking on the liitle Camera icon above your reply. :)
Just checked on 10.7.4+, still the same, something is borked about your install, to see if we need to re-install...
To find out if it's system wide or user specific, try this...
Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account?

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

Dynamic file name of the attachment in sender mail adapter

Hi
I have configured a sender mail adapter which receives some attachments.
Right now the file name of the attachment is hardcoded to "MailAttachment-1" "MailAttachment-2" using the content-description from "AF_Modules/PayloadSwapBean" module.
I want to set it to dynamic ie. instead of "MailAttachment-1"... i want it with real name of the attach.
please suggest a solution w/o the need to develop a custom adapter module.
Thanks!
Regards,
Mariano.

Thanks Prateek,
Now, i can see that the name of the original file is into the content type named as text/xml; name"name of the file.xml" when i send the email from outlook.
If i send it from hotmail, this is not happend.
Do you know why happend this?
If i always would have the original name inside the content type, my problem will be solved.
Edited by: Mariano Vidal on Feb 13, 2009 2:26 PM

Dynamic File Name - Suppress the Substitue varible

Hi All,
I am doing the scenarios like File name at the recevier end would be dynamic for that i take an extra field NAME mapped with UDF which return the file name dynamically. It is working fine and doing good. But the problem here is , this field is the first field in my target structure so i am getting an empty line in the target file.
So My structure as follows:
MT_BNK01 1..1
NAME 1..1
RECORD 0..Unbound
 --Record_data 0..Unbound
So in the recever side i written as follows
Recordset Structure:: RECORD
RECORD.fieldSeparator = 'nl'
RECORD.endSeparator = 'nl'
But according to this weblog i can suppress the empty line but it is not working
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
means, NAME is also in the same level of RECORD in the Structure. So How can i pass the structure as ??
I tried to pass the RecordSet Structure: NAME,RECORD
and following parameters, it is not working
NAME.fieldFixedLength =0
NAME.fieldLengthTooShortHandling = Cut
Can you please suggest me what could be the reason. Tell me what information i need to pass the RecordSet Structure and attrubute information also.
One more thing like, My sender side it is not picking the empty lines. What could be the reason. I given fieldSeparator and endSeparator as 'nl'. So to catch the empty line what i need to do???
Thanks in Advance,
Best Regards,
Vijay

Hi Vijaya,
This can be solved. Actually i had the same scenario where i was getting blank line for the header. Suppose Header was carrying the file name after i cut the value i would get a blank line in file.
So i added in content conversion parameter the following line
Header.endSeparator - '0'
then the first line was not blank.
Try this, i think your issue will be solved
Regards,
Ramesh P
Message was edited by:
 Ramesh Parashivamurthy

"Could not save (file name) because the file is already in use or left open."

Hello,
When I tried save as a file, I get an error msg:
"Could not save (file name) because the file is already in use or left open."
The file is not open anywhere accept Photoshop.
Mac Pro, OSX 10.5.6
Photoshop CS4.
I searched the forum but could not find anything even though i'm sure someone already asked it.
would love to get a solution for that.
thank you,
shlomit

There is a problem with both Photoshop and InDesign, then we can blame wich ever it is.
1. I open a .psd file in Photoshop CS4 by double clicking it in Bridge
2. This image is placed on a page in a open InDesign document.
3. Doing some changes in Photoshop on the image.
4. Trying to save and get this error message (this topics subject)
5. Deleting the image from the page in ID doc, it is the only one in the document.
6. Can't still save file.
7. Closing ID completely and now I am able to save the file.
I tried turning of Live preflight in Indegisn but that didn't help.
So probably the fault is InDesign or the MacOS. I didn't have this problem with CS3. It is a stupid problem because this type of workflow is pretty common and one would expect it to be solved by now.
Jan Suhr
Stockholm, Sweden

Missing file name in the sequence

Hi All,
I have struck with the problem which is finding the missing file name in the file_name column. This column also have sequence.
FAX_NAME RECEIVED SENDER FAX_SIZE
fax000000433.tif 01-JAN-07 redro 10k
fax000000434.tif 01-JAN-07 redro 10k
fax000000435.tif 01-JAN-07 redro 10k
fax000000436.tif 01-JAN-07 redro 10k
fax000000437.tif 01-JAN-07 redro 10k
 One file name missing
fax000000439.tif 01-JAN-07 redro 10k
fax000000440.tif 02-JAN-07 redro 10k
fax000000441.tif 02-JAN-07 redro 10k
fax000000442.tif 02-JAN-07 redro 10k
fax000000443.tif 02-JAN-07 redro 10k
fax000000444.tif 02-JAN-07 redro 10k
fax000000445.tif 02-JAN-07 redro 10k
fax000000446.tif 02-JAN-07 redro 10k
fax000000447.tif 02-JAN-07 redro 10k
fax000000448.tif 02-JAN-07 redro 10k
fax000000449.tif 02-JAN-07 redro 10k
fax000000450.tif 02-JAN-07 redro 10k
Here i want to retrive the Faxname(fax000000438) which is missing
The output like..
I've Designed one BIRT rptdesign for this this in the bellow formate..
FAX_NAME RECEIVED SENDER FAX_SIZE Missing_Faxes
I've tried with bellow query but i did't get.
select Fax_Name digits from(select min(digits) MN from (select translate(s, '0' || translate(s, '1234567890', ' '), '0') digits 7 from (select filename s from received_faxes))) connect by level8 minus select distinct digits from (select translate(s, '0' || translate(s, '1234567890', ' '), '0') digits 10 from (select filename s from received_faxes))
Could you pls help me..

This?
SQL> with t1 as
2 (select 'fax000000433.tif' nam from dual union
3 select 'fax000000434.tif' from dual union
4 select 'fax000000435.tif' from dual union
5 select 'fax000000436.tif' from dual union
6 select 'fax000000437.tif' from dual union
7 select 'fax000000439.tif' from dual union
8 select 'fax000000440.tif' from dual union
9 select 'fax000000441.tif' from dual),
10 t2 as
11 (select to_number(mid(nam,4,9)) faxno from t1),
12 t3 as
13 (select max(faxno) ma, min(faxno) mi from t2)
14 select (mi+level - 1) faxno from t3 connect by level <= ma - mi + 1
15 minus
16 select faxno from t2
17 ;
 FAXNO
 438
SQL>

How to specify file names for the generated code in wscompile

Hi,
We want to follow a certain file naming conventions for the artifacts generated by wscompile.
How is it possible to set the name for the service interface file, service implementation file etc....
This is possible in AXIS ant task Wsdl2Java. How do we do it for wscompile.
thanx

Thanks Chris and c. Under Description I'm presented with three Names for the profile: ASCII, UniCode and Mac Script. ASCII and Mac Script are the same name for the profile, with nothing being in the UniCode Name box. Which do I change -- both?
Am I going to screw things up in Photoshop if I change these names to something I can comprehend? Looks like I may just have to make a sticky-note list of the cryptic profile names with my own descriptive name as a reference. Thanks.

Adding file name in the sender Adaptor

Hi ,
I am facing some problem in adding file name .
The scenario is like this :
The file needs to be send from on system and needs to be Archived . Once processed, the archived file should be prefixed with ARCH_ so that it is not picked up again .And the other thing given is the file name used will be of the format XXX_YYY_nnnnnnnnnn.DAT where nnnnnnnnnn is the date stamp .
Please help it's urgent ......
Thanks and regards
Anita

Hi,
if you can have XML achvived files you can use
standard
processing mode: Archive
with one swich you can set the timestamp mode
yyyMMdd-hhMMss-SSS_.
ref
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
michal

Get a font's file name from the font's postscript name (on Windows)

I am trying to obtain the the font file name when the only information I have is the font's 'postscript' name. (Emphasis: the font's name is postscript and not the font).
For example I have the following postscript name: TimesNewRomanPSMT.
The real name that is saved in the registry is: Times New Roman (TrueType).
Is there any way of obtaining that name from the given postscript name?
Currently I am coding this for Windows, but it should be compatible, or at least have alternative code for MacOS

Funny. I'm having the same problem and was about to post the exact same question
In Photoshop, there is "app.fonts", which lets you get a font's postscript name from the font's name. This doesn't exist in After Effects.
My only hope is that there's a way to get a font's postscript name in Visual Basic. I'll let you know if I find anything useful.

Different log file name in the Control file of SQL Loader

Dear all,
I get every day 3 log files with ftp from a Solaris Server to a Windows 2000 Server machine. In this Windows machine, we have an Oracle Database 9.2. These log files are in the following format: in<date>.log i.e. in20070429.log.
I would like to load this log file's data to an Oracle table every day and I would like to use SQL Loader for this job.
The problem is that the log file name is different every day.
How can I give this variable log file name in the Control file, which is used for the SQL Loader?
file.ctl
LOAD DATA
INFILE 'D:\gbal\in<date>.log'
APPEND INTO TABLE CHAT_SL
FIELDS TERMINATED BY WHITESPACE
TRAILING NULLCOLS
(SL1 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL2 char,
SL3 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL4 char,
SL5 char,
SL6 char,
SL7 char,
SL8 char,
SL9 char,
SL10 char,
SL11 char,
SL12 char,
SL13 char,
SL14 char,
SL15 char)
Do you have any better idea about this issue?
I thought of renaming the log file to an instant name, such as in.log, but how can I distinguish the desired log file, from the other two?
Thank you very much in advance.
Giorgos Baliotis

I don't have a direct solution for your problem.
However if you invoke the SQL loader from an Oracle stored procedure, it is possible to dynamically set control\log file.
# Grant previleges to the user to execute command prompt statements
BEGIN
dbms_java.grant_permission('bc4186ol','java.io.FilePermission','C:\windows\system32\cmd.exe','execute');
END;
* Procedure to execute Operating system commands using PL\SQL(Oracle script making use of Java packages
CREATE OR REPLACE AND COMPILE JAVA SOURCE NAMED "Host" AS
import java.io.*;
public class Host {
public static void executeCommand(String command) {
try {
String[] finalCommand;
finalCommand = new String[4];
finalCommand[0] = "C:\\windows\\system32\\cmd.exe";
finalCommand[1] = "/y";
finalCommand[2] = "/c";
finalCommand[3] = command;
final Process pr = Runtime.getRuntime().exec(finalCommand);
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_in = new BufferedReader(new InputStreamReader(pr.getInputStream()));
String buff = null;
while ((buff = br_in.readLine()) != null) {
System.out.println("Process out :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process output.");
ioe.printStackTrace();
}).start();
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_err = new BufferedReader(new InputStreamReader(pr.getErrorStream()));
String buff = null;
while ((buff = br_err.readLine()) != null) {
System.out.println("Process err :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process error.");
ioe.printStackTrace();
}).start();
catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
public static boolean isWindows() {
if (System.getProperty("os.name").toLowerCase().indexOf("windows") != -1)
return true;
else
return false;
* Oracle wrapper to call the above procedure
CREATE OR REPLACE PROCEDURE Host_Command (p_command IN VARCHAR2)
AS LANGUAGE JAVA
NAME 'Host.executeCommand (java.lang.String)';
* Now invoke the procedure with an operating system command(Execyte SQL-loader)
* The execution of script would ensure the Prod mapping data file is loaded to PROD_5005_710_MAP table
* Change the control\log\discard\bad files as apropriate
BEGIN
Host_Command (p_command => 'sqlldr system/tiburon@orcl control=C:\anupama\emp_join'||1||'.ctl log=C:\anupama\ond_lists.log');
END;Does that help you?
Regards,
Bhagat

How to insert the file name to the start and the end of a SQL file by a powershell script

I just began to learn powershell script and I have a problem that I cannot figure out. I have a lot of .sql files. I need to insert its file name to the beginning of the file (After USE statement) and the end of the file (before the last END statement). Is
there anybody knowing how to do this?
Thanks so much
Regards

Actually, I want to add a insert SQL statement to the beginning of the file and the end of the file. Only the file name is a variable and different among
different files. All the other sql statements are the same and can be hard coded. Hopefully it helps –
The problem I think is that I want to add the same thing (except the file name) to hundreds of sql files and only the file name is different. I do not want
to add it manually and want to use a script to add it –

Error: Enter either the physical file name or the logical file name

Hi Expert,
I have error: Enter either the physical file name or the logical file name, when upload BP with external data transfer.
My Step:
1. Define Sender Structure
2. Define Transfer Rules
3. Start Transfer
When execute step 3, there's displaying error: Enter either the physical file name or the logical file name
Can you help my problem?
Any document/link for upload BP with external data transfer.
Thanks and Regards,

Hi,
See thread: [CO-PA External Data Transfer|CO-PA External Data Transfer]
Regards
Leon

Changing file names in the Information Pane

Why doesn't changing the names of photographs in the Information Pane also change the name of the files in the iPhoto Library folder??
If I import photos direct from my camera, the photos are stored with generic file names (like DSC_006) in the Original Folder and the Data folder in iPhoto Library folder. Once stored there, I understand that if you move, delete or "rename" any of those files "in the Finder" that iPhoto may not thereafter be able to see them.
But I don't understand why if you change those file names in the Information Pane from within the iPhoto application, why the actual file names in the Original and Data folder aren't correspondingly changed.
I would prefer to eliminate the generic file names and presently the only way that I can do that is to simply transfer the photos from the memory cards, change the file names and then import the files into iPhoto.
This seems like an unnecessary step.
Am I missing something here?

If you want the capability of editing the original file names they you'll need to upgrade to a more professional application like iView MediaPro. Aperture doesn't let you change the original file names from within the application.
If you need to the use file outside iPhoto with the same name as the Title in iPhoto then you can do just as PhillyPhan pointed out, export to the Desktop using the User Title option.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Downloading a pdf file, saving it, won't show the full name of the saving file when the name contains a space, stopping the file name.

Downloading a pdf file, the name of the file contains a space in the middle of the file. The name showing on the 'Save' popup is the first few letters up to the space. Works fine on IE8. For instance, a file named "old snail_12345.pdf" would only show "old" (ignore the "s). This is on Firefox 30.0, WinXP Pro.

Is this a problem when you are viewing the file in Firefox's built-in PDF Viewer and using its download button, or when you are using a download button in a web page?
I've seen this problem occur when the server is pushing a different file name than the actual file name (for example, the file name is pdf.asp?id=12345 but the server is sending the name Annual Report.pdf in the headers sent with the file). I'm not aware of a workaround for the user, but for what it's worth, it is easy to fix on the server by replacing the spaces with %20 (the standard substitution used in web addresses).

HR-PDC interface: Problems in the file name of the downloaded idoc file

Similar Messages

Maybe you are looking for