HR Processes and Forms, Delimit multiple entries from IT0014

Hello,
I am trying to delimit multiple records in infotype 0014 with the backend service SAP_PA. I am only able to delimit the first record of this infotype while the rest of the records remain unchanged. If anyone has any info on how to delimit all records I would greatly appreciate the advice.
Here is how I have my config set up:
Field Name - Operation - Infotype - Subtype - Screen Structure - Field - Record - Data Element
I0014_PERNR - Delete - 0014 - * - HCMT_BSP_PA_US_R0014 - PERNR - * - PERNR_D
Thanks in advance,
Jim

Using "*" for the subtype on an infotype of Time Constraint 3 is a known problem. I wrote about it in my "gotcha" blog about HCM P&F with the specific code it even fails on. There is a recent patch out to fix/address this, but the number escapes me (just search on notes for PA-AS and you will see lots!)
Past that, a LOT of the operations that SAP_PA handles poorly or not at all (ie. time constraints other than 1 and 2) and/or when significant "pre-business logic" is needed (good ol' IT0041 comes to mind!), I now have learned to handle in "follow-up" custom workflow tasks that will trigger a custom function module I write to handle all those "odd" operations myself. It works VERY nicely like that and uses the same kind of coding/methodology as SAP's code. Currently, our team is working on getting it to work through an Advanced Generic Service. When that happnes, it will be sweet! That means, we can pretty much do ALL the work needed in our AGS....not in a custom workflow task or some convaluted jumble of genercis services prior to a SAP_PA call, or none of that anymore.

Similar Messages

HCM Process and Forms Pass data's from forms to workflow

Experts,
In my HCM forms and process, I have some fields. So at runtime Approver will enter some inputs on it. Example [Dependent details - Spouse, child names].
It will stored temporary in the workflow, and finally will update in the system.
Now my question is where the data's strored in the workflow. I need the data's entered by the Approver, to check some validations.
So how to get the data's entered in the Form to the workflow.
Please help me on this,
Helps will be highly appreciated.

Hi,
Idont have much idea about HCM forms.
but if u can able to read the forms u can store it in workflow container and the necessary validations and subsequently u can save it in database.

HCM Processes and Forms - Create multiple records of one infotype (eg 0008)

Dear all,
I'm trying to create two new records in infotype 0008 (basic pay). Regarding it's time constraint 1 it should like the following:
Before
01.01.2010 - 31.12.9999 - 2000u20AC
After
01.01.2010 - 08.11.2010 - 2000u20AC
09.11.2010 - 31.12.2010 - 2500u20AC
01.01.2010 - 31.12.9999 - 3000u20AC
So I want to add two splits two the record. One is easy, as it's done by the SAP_PA operation. I experimented with the record indices and duplicating my fields, but it didn't work. Another idea would be to retriggerd the SAP_PA several times using scenario steps.
Can you give me a hint, by which lever multiplee splits can be achieved? Or is this not possible at all?
Thanks in advance,
Peter

Thanks for your fast reply.
Knowing this as a fallback is comforting. I just want to ensure, that I don't apply any coding, if a task is also possible by customizing.
Another idea I had in the meantime was to execute the SAP_PA several times. Do you have any experience, if this works to create multiple records in one infotype?
Edited by: Peter Gilberg on Nov 9, 2010 2:34 PM

Multiple forms through process and forms

Hello ALL,
We are using process and forms for maternity, paternity and
adoption leave and not able to control creating multiple forms by
employee. We have not activated parallel run option, still system is
allowing user to create multiple document for same leave
Could you let me how to stop user to creating multiple
forms.

There are many ways to achieve this.
1. Use the BADI that you shown in the screenshot.
2. Set process frequency.
Regards.

Calling a web dynpro from hcm process and forms

Hi All,
I have a requirement where in i need to call a web dynpro when i click on a drop down in HCM Process and Form(i.e in Adobe Form) and this drop down should get populated via the code written in webdynpro. Can this be done?if yes can anybody please give me an idea how can i achieve this.
Thanks,
Praveen.

HI Vishal,
thanks for your earlier reply,
i have requirement where in i have to read vales or fields from hcm p&f form (adobe form which is isr native) and based on the read values i have to buld a search help . Could you please help me on this.
Thanks,
Praveen.

Query on HCM Processes and Forms

Hi
I am facing some issues in configuring Hiring Forms in HCM Processes and Forms. I can place them in 2 baskets and describe each of them below. I would appreciate any advise on ways and means to overcome these errors.
Basket #1
I want to use the standard forms SHU1, SHU2 in development environment to understand the HCM P&F functionalities. I copied these form scenarios from client 000 and did all the configurations as outline in IMG activity HRAdministrative Services >> Configuration of Forms and Processes >> Sample Processes for HCM Process and Forms.
When I run a check using HR Administrative Services >> Configuration of Forms and Processes >> Configuration of Forms >> Check Consistency of Form Scenarios and select Form name, I get errors along following lines:
u2022     Error Message Sample#1 Form scen SHU1 vers. 00000 serv. SAP_PA: Only one deflt value allowed for field I0009_ZLSCH
u2022     Error Message Sample#2 Form scen. SHU1 vers. 00000 service SAP_PA: Field I0007_ARBST default value is not created
u2022     Error Message Sample#3 ISR scenario SHU1 version 00000: Field I0001_BUKRS is missing
u2022     Error Message Sample#4 Form scen. SHU1 vers. 00000: Field I0007_ARBST service for default values not required
However, at the bottom of the log I see this message in Green: Form scenario SHU1 version 00000: Form scenario is consistent
I tried to make the changes as suggested in the Long Text for each of these messages. Probably due to the fact that I am using standard delivered forms, I get this message u201CDo not make any changes (SAP entry)u201D and I am unable to save the changes.
Basket #2
In this basket I have Org_Change form and have managed to go the whole nine yards and complete the configuration in ECC. The consistency checks for process and forms are in green. However, I am unable to start the process through Portal. I get this message u201Cno data availableu201D when I try to select a process.
Among the 5 roles delivered in SAP as initiators for processors u2013I am interested in 3 of them HRASARA (for HR Administrator). I have configured HRASRA and HRASRB as initiators for Org_Change. However, I am not able to figure out how to link these roles to portal roles such as SAP_ASR_ADMINISTRATOR, SAP_ASR_MANAGER etc.
I would appreciate any advise on ways and means to overcome these errors.
Thanks
Subhash

Have you been able to fix your issue in Basket # 2 ?

Infotype 0000 Creation using HCM Processes and forms in MSS

Hi,
I need to create an Action for Transfer an employee using HCM Processes and Forms. So, my form should update infotype 0000, 0001, 0008 etc.
But when I provide create operation for infotype 0000, system is throwing short dump. When I change the operation to change nothing was creating in infotype 0000 for that respective employee. Is there any way to update infotype 0000 using HCM Processes and forms. Please help me here.
Thanks & Regards,
Nayani.

Hi Chris,
Thanks for your reply mate.
I understand that for IT0000 update we don't have to configure it explicitly.We just assign values to MASSG and MASSN and IT0000 should update. I am doing exactly that.
For the "condition" we do have multiple rules for that and I am familiar about the trickthat the rule fields must be part of the SAP_PA service which is actually making the update. That's all in place and that's working fine.
Now coming to the problem -
The "action" is "Return from Career Break" where the only PA infotype that has to be updated is IT0000. Besides that we are updating Absences,IT2001.
I have tested the process thoroughly and it seems that the system does not allow an IT0000 update without any other PA data change. To test this, I added a PA infotype update in my config and at that time IT0000 got updated beautifully. But when I am trying to update only IT0000, it fails.
To solve the issue, I had a discussion with my team and we have decided to copy IT0001 along with IT0000. So as of now, we have sorted out a workaround but the technical issue is something I would like to look into.
If you figure out anything then please let me know.
Appreciate your help.
Thanks,
Saikat

HCM process and forms - form scenarios

Hi Experts,
Currently i am working on Process and Forms using FPM forms. I have already decoupled couple of infotypes. Is it possible to create a process for more than one infotypes(should we use 2 form scenarios) or should we create one process for each infotype?
Thanks in advance
Regards
Prakash

Hello Prakash,
There are several posts on this , you can review them before posting the queries.
You can have multiple infotypes within a from scenario.
Go through the post HCM Processes & Forms: Making sense of the new SAP tutorial using FPM by http://scn.sap.com/people/christopher.solomon , to understand the process config.
Hope this helps.
Regards,
Sahir.

HCM Process and Forms - Changes to Form Issue

We have a scenario within HCM processes and forms where the changes being made by an intermediate approval step is not being sent to the next level approver. For example, in a pay change the initiating manager sends the pay change to his/her boss for approval, then once approved the form is sent to HR for final approval and update into R/3.
In this scenario the initiating manager starts the process and makes appropriate updates to the form (including comments). This then routes to that manager's manager for updates/approval. When processing the form, the approving manager can see the information input by the initiating manager. The approving manager then has the opportunity to make appropriate changes within the form and add comments before it is approved and sent to HR for final approval.
Once the approving manager makes changes and sends this to HR, when HR processes the form they see the changes as if it was sent by initiating manager (HR does not see the changes made by the approving manager).
I appreciate any insight you may have on this issue.
Regards,
Brad

Sounds like you process is designed incorrectly and your are having problems with your process object integrity. You need to be careful with loops/branches when designing your process. Are you doing it all in the same Form Scenario and just using multiple steps? The form scenario will "share" the "data" hence you can have issues. You can split it to a differnt form scenario and pass the data over from the other FS to your FS. Then you know you will have your own data there. I often see people trying to do their whole process within one form scenario and use multiple steps without realizing the data integrity issues with that.
Hope this helps.

Dynamic Parallel Approval for HCM Process and Forms

Hi everyone,
I have a scenario where I need to use the "Dynamic Parallel Approval" (or to keep it simple, initially I tried using the "Parallel Approval" wizard)for a workflow used in the HCM Process and Forms.
The standard task for approval in process and forms is TS17900101. I have mentioned a multiline container in the Miscellaneous tab of this task. However,I was unable to use this task in the wizard. There are no results attahced to this task unlike any other standard approval task (like TS30200147). I need to use the task TS17900101 in the workflow assigned to process and forms, but not sure how to handle this scenario (parallel approval).
If this is not the right way of doing it, Is there any workaround for "Parallel Approval" in HCM Process and Forms.
Could anybody throw some light around this area.
Thanks for your help.
- MM

Thanks Anuj. But I believe, the container element that I add in the miscellaneous tab does not necessarily have to be used in the agent assignment. The multiline container is just to instantiate the workitem 'n' number of times. Correct me if I am wrong.
My concern is that I was unable to use this approval task (TS17900101) in the workflow wizard for dynamic paralle/parallel approval.
Arghadip - Thanks for your suggestion. I have seen some your nice contributions in the WF forum.
I actually tried using the 'Blocks'. But this is what I ran into. When I send multiple approval requests (say 3), if one person has approved it and the second has rejected it,I need to take out the workitem from the third person's list (because it has been rejected by someone in the group). I am not sure if this is possible using Blocks. And in my case the third person is still having the workitem, but gets a dump/error when he tries to open it.
Also, if any one has rejected the request, I do not have to wait for the rest to take any action on the workitem and proceed further. But I guess in 'Blocks' it will not let you go out unless every workitem has been processed.
To summarize,here's what I need - I need to come out of the block for two conditions. One, if everyone has approved, comeout of the block with an apprval flag. Two, if anyone has rejected (even if some have not processed their workitem), delete the workitems from others inbox and come out of the block with a rejection flag.
So, any kind of input or suggestions on how this could be handled would be highly appreciated.
Thanks
MM

Workflow issue in HR Process and Forms

Hi Experts,
I am new to HR process and Forms.
I am facing workflow issue in "change of position" process.
The process is not going from manager to HR admin.
Can anybody help me out on this.
Thanks in advance
Regards
Rahul

Hi Sahir,
Thanks for your quick response.
I checked in swi1 but it is showing "no entry exists"
I have done all basic settings using PFTC and OOCU_RESP tcode but still it is not working.
is there any other customizing that is needful??
Regards
Rahul

How to get the latest and valid BOM item entry from STPO

hi,
may i know with what condition we can get the latest and valid BOM item entry from STPO table?
i have STLNR and IDNRK as a input. But i realized that it would return multiple entry due to the combination of valid-from and valid till date.
can i use stlnr,idnrk and stpoz (with the latet counter) to get the latest and valid BOM entry?
thank you.

Hi
You can get the latest BOM either by using the latest valid from date DATUV or latest internal counter STPOZ
Regards
Shiva

HCM Processes and Forms: Work Item is not opening

Hi,
We are implementaing HCM processes and forms using NWBC (EHP7 - HR Renewal 2.0 FP1) and after using configuration of POWL inbox for MSS and HR Admin, We are not able to launch the Work Item.
1) In MSS Work Book, while launching, we are getting message -
Failed to resolve Object Based Navigation target ".MSS_WL.NAVIGATE_FORM_WD". Use transaction PFCG to define this OBN target in a role or contact your system administrator to assign a role with the relevant OBN entries to your user.
2) For HR Admin, we are getting message - Work Item can only be open using Portal and UWL. and it is displaying back end transaction SWNWIEX.
Detail configuration steps are shown as below -
Workflow Task used in configurations -
1) Entries in IBO_C_WF_TA_P_SC (Assign Task ID’s to POWL Types)
2) IBO_C_WF_ACC configuration - (Define Tasks and Actions)
3) IBO_C_WF_APC configuration (Provide Details of navigation parameters)
4) IBO_V_WF_TTAC (Assignment of Actions to the Tasks)
5) IBO_C_WF_TAC (Specify Default Action)
Error -
1) MSS -
2)HR Admin -

Hi Guru,
Any input..its urgent!.
Regards,
Vijay

Dump while Executing Hrast_dT (Design time of HCM Process and Forms)

Hi All,
I am getting Syntax Error Dump while Executing Hrast_dT tcode (Design time of HCM Process and Forms) and here with i have mentioned the source code also ist contained in standard class.
*METHOD constructor.
DATA:
    badi_context          TYPE REF TO lcl_badi_context.
CALL METHOD super->constructor
    EXPORTING
      form_scenario         = form_scenario
      form_scenario_service = form_scenario_service.
DATA:
    t5asrfscnsrv_wa TYPE t5asrfscnsrv.
SELECT SINGLE * FROM t5asrfscnsrv INTO t5asrfscnsrv_wa WHERE form_scen_srv EQ form_scenari
ASSERT sy-subrc EQ 0.
ASSERT t5asrfscnsrv_wa-service_type = 'GENSRV'.
fill_table_metadata( ).*
i followed this link also..its not working for me..
[Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3]
Regards,
Parthi

Hello Parthasarathi,
Please, try to implement the note 1075650.

Error in MSS HCM Processes and Forms Overview

Hi all,
Currently we are working on ESS/MSS from NW 7.3 portal.
When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
And on some user HCM Processes and Forms Overview not shown properly.
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest me the solution.
Regards,
Devendra

Dear Andrea,
I reset the password of backend user and gave sap_all and sap_new role.
Last time it prompt the screen in mss as to change the password. (See above screen shot).
But after reset the password...error showing instead of login screen in mss as below:
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
   What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
I checked log in ST22 as below
What happened?
    The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_ABAP_TSTMP=================CP' has to be
    terminated.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
     caught in
    procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
Regards,
Devendra

HR Processes and Forms, Delimit multiple entries from IT0014

Similar Messages

Maybe you are looking for