HR Qualifications and Proficiencies how are they related ? Which table ?

Hi all
People have qualifications, qualifications have proficiencies, proficiencies have proficiency scales.
Table HRP1001 contains personel numbers and the qualifiation objects that are related to them.
Table HRP1000 contains loads of objects including the qualifications IDs with object type 'Q'.
Table T77TS holds the Proficiency IDs and text.
Table T77TP holds the Proficiency Scale IDs and Texts
But where (which table) is the relationship between the qualification and its accociated proficiency stored.
In short I am trying to report on people with a particular proficiency level for a particulat qualification but can not make the link between qualification and proficiency. It must be stored somwhere !
cheers hugh

Hi
Just to qualify, I'm looking at qualifications associated with an employee, not those associated with a post so I don't think they are in IT0024.
from Volkers post...
"OTYPE P (person) related to OTYPE Q via RSIGN = A and RELAT = 032
and OType Q is related to Person via B 032"
But what links OType Q or A 032 to a proficiency and proficiency scale ?
cheers Hugh

Similar Messages

  • Iweb problems and idisk problems are they related?

    I have not been able to publish siince upgrading to iweb1.1 two days ago I get the same message everytime "Publish failed due to a network error. Check your Internet connection and try again."
    Also I can't get into "idisk" on the web or the finder bar. It gives the message "the volume for "idisk" cannot be found".
    I am wondering if these are related?

    It could very well have been related. There was a period of time yesterday when the iDisk server was down.

  • Locking and INITRANS setting: Are they related?

    DB Version:10gR2
    For one our applications, we see locks being held for long periods on three tables. So, one of our DBAs is suggesting to change INITRANS setting for these tables to get rid this locking issue. Does INITRANS setting in anyway cause locking issues?

    The INITRANS setting controls Initial Transaction Slots (ITLs). A transaction slot is required for any session that needs to modify a block in an object For tables INITRANS defaults to 1 for indexes, 2. However, if the block has little or no free space then transactions will serialize waiting on a free ITL. This is one cause for data base block waits. By setting INITRANS to the number of expected simultaneous DML.
    The maximum value suggested for INITRANS is 100 and settings over this size rarely improve performance. Therefore a setting of INITRANS to the average number of simultaneous DML users and setting MAXTRANS to 100 will most likely result in the best utilization of resources and performance

  • SMART FORMS: How are they used and how can they be configured/enhanced?

    Hi Experts,
    I would like to know how are the smart forms used in crm.I know that by using t-code SMARTFORMS we can view/edit standard smart forms . But I am confused about the fact that how are they used.If some one can list me the steps to be followed in simple language that would be of great help.
    Any pointers would also be appreciated.
    Regards,
    Aneesh

    Hi Aneesh,
      In CRm we use smartforms to send mail to Business partners based on the client requirement. This sending process will be defined using Actions. Through actions we will trigger the smartform and send to the concerned busines partner mail id.
    Hope this helps you.
    Regads,
    Lakshmi.Y

  • Tables: CATSDB & AFRU - How are they filled and what are there purposes?

    Hi,
    In regards to tables CATSDB & AFRU, how are they filled (interfaces, programs) and what are the purposes of these tables?
    I found the interface IF_EX_CATSBW_CUST_ISOURCE for table CATSDB but is this how CATSDB is filled? How about AFRU?
    Please help.
    Thanks,
    John

    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/19/8d38689bfd11d38ea50000e81de309/frameset.htm">CATSDB</a> is usually filled via Time Entry (CAT2) or a BAPI call.
    Arya

  • What are phantom materials and assembly... how are they taken care during M

    Hello Gurus
    what are phantom materials and phantom assembly... how are they taken care during MRP run

    Hi
    Phantom assembly is the logical assemble. You have to define special procurement type in mateiral master as 50 to make the item as phantom.
    When you make the item as phantom when running mrp BOM will explode for the phantom <b>ONLY child materials requirements will be generated</b>.For phantom assembly planned order will not be generated.
    A phantom assembly is a logical grouping of materials. A phantom assembly is usually created within engineering, in order to describe a number of components easily and manage them as a whole. The components in a phantom assembly are placed immediately into the superior assembly. As opposed to this, components in an assembly are first assembled to produce the header material. After this the header material is placed into the superior assembly.
    Example: The phantom assembly "set of wheels" contains the components "front wheel" and "rear wheel". The front and rear wheels are placed immediately into the "bicycle" assembly. The "light" assembly contains the materials "bulb" and "reflector". The light components are first assembled and then the light is attached to the bicycle.
    Regards
    Ranga
    null

  • RealStrat and Kontakt 3 - How are they for you Logic 8/Mac Pro?

    Hi
    I'm thinking on splurging on these two products to use in Logic 8 with an Intel Mac Pro. How are they for you? Do they work OK? I don't see too many negative comments here so I'm assuming that they're working OK. I'll go look the Native Instruments and MusicLab forums as well but thought there might be those here who could comment.
    Regards
    Graham

    K3 works fine on my 8-core since version 3.01 - actually 3.02 is buggy again so don´t upgrade to the latest version of K3 which is 3.02.
    If there would not be the annoying 2 Gigabyte RAM limit within 32-Bit applications I would be even happier, but if you need more Sample space just setup an additional K3 in standalone mode and wire it through the IAC Bus.
    If you use it in multitimbral mode with multiple outputs you'll have to write any automation onto the assigned Aux tracks as automating the single Midi tracks for K3 does not work.
    Altogether K3 is an awesome mashine with clear improvements compared to K2.

  • What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

    Hi All,
    I am new to TestStand. Still in the process of learning it.
    What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
    Thanks in advance,
    LaVIEWan
    Solved!
    Go to Solution.

    Hi,
    Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
    Regards
    Ray Farmer

  • I created a form for our band parents to fill out.  How are they able to save the forms as pdfs?

    I created a form for our band parents to fill out.  How are they able to save the forms as pdfs and be able to go back and view them?  I see the Save Submission-Enabled PDF on the Distribution page but there is no option when they go in to the first page of the form to save.
    Thank you very much for your help.

    If you are distributing a PDF using the save submission enabled pdf option, then respondents can save it using the Adobe Reader. They save it just like any other file - File menu -> save (or save icon on toolbar).
    Randy

  • What are ROWID and ROWNUM? Are they stored in database and where?

    Hi All,
    can anybody please answer this question
    What are ROWID and ROWNUM? Are they stored in database and where?
    Thanks,
    Srini

    ROWID can be thought of as a pointer to the physical location (on disk) of the (table) row.
    From a ROWID value, Oracle can extract the file, block-within-that-file and offset-of-the-row-within-that-block. Using these, Oracle can directly access a disk block to retrieve a row.
    ROWNUM is a just sequence number of a row within a result set of a query.
    As said by other repliers, both are not stored. They are 'constructed' when you reference them inside a query.

  • Yosemite 10.10.2 server app. FTP help. I have a program running in my local server enviroment that wants to FTP to my mac folder. It asks for the server , name, password, port and path. what are they?

    So I have set up a localhost area in my Mac. I have the new server.app and I am running yosemite 10.10.2 .
    I have a program running in my local server enviroment that wants to FTP to my mac .
    It asks for the server , name, password, port and path. what are they?
    I am pretty certain that the Serveris "localhost",
    Name is my macs name (like my-mac-min)
    password is "my login password"
    and they suggest port 21.
    But what is the file path, lets just say my site is set up http://localhost/siteftp and is actually at my Users/Sites/siteftp folder.
    Why cant this program connect to the mac.
    Is it because they are both operating in the same localhost enviroment,
    could it be my folder permissions are not correct on siteftp folder?
    Help please !

    I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
    Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.

  • Service Contract and Service Quote, Are they two different application or s

    Service Contract and Service Quote, Are they two different application or same application ?
    What is the difference ?
    thanks
    siva

    Siva
    There is no application called Service Quote (But we can have services in the quoting lines).
    Thanks
    Nagamohan

  • I have an iMac, where are the completed print jobs stored on the iMac and what format are they?

    I have an iMac,  where are the completed print jobs stored on the iMac and what format are they?
    My OSX is 10.10.1

    Hi
    If you are using standard system or HP drivers, than the jobs contents are not saved at all.
    You can see the list of completed jobs per printer via this URL: http://127.0.0.1:631/printers/
    If you want to save a print job, you can do it in the print dialog, by selecting an action prom "PDF" popup.
    It allows to save a job (prior or instead to printing it) as PDF or PostScript.

  • How are they going to resolve the 4s 3g problem??

    How are they going to resolve the 4s 3g problem?

    Huh?  If WiFi is available, the phone always uses WiFi over 3G.  This is NOT a problem with the 4S. 

  • Itunes show duplicate, 1 with icloud and 1 without. are they both on hard drive?

    itunes shows duplicates - 2 with icloud and 1 without.
    are they both on hard drive?
    which ones should i delete?

    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    The should then show in your iTunes library. They are not anywhere else.

Maybe you are looking for

  • Dynamic file name inside the ZIP file

    Hi Experts, I have done proxy to file scenario, reciever side is the file ZIP file, i have done successfully done Zip file using adapter modules in Communication Channel. The file name is hard coded like this. contentType-----Transform.ContentType--

  • How do I combine several mov files into a larger mov file?

    I am just getting started with Premiere Elements (12.0) and have what seems to me to be a very simple goal.  I have several short ".mov" movies and would like to combine them into a single ".mov" movie.  I have gone through the menus and can't find a

  • Tomcat with Apache

    Hi, I have followed the tutorial on this website to configure tomcat to connect with Apache. I am on a CENTOS 5 system. Apache was already installed and serving three web sites without problems. I wanted to add the ability to work with .jsp files and

  • Abap report in XML format

    hello all, i need to downloadABAP report in xml format. can any body help me out. Thanks chandramani

  • Mavericks user interface hangs - any known solutions?

    I have a 27" late 2012 iMac with an up-to-date copy of Mavericks (10.9.4.) Occasionally (as in every couple of weeks) the user interface hangs completely. The mouse cursor moves, but clicks do not have an effect, and the keyboard is ignored. Applicat