HR Renewal 1.0 FP4 and Standard Process

Hi,
We had recently installed HR Renewal 1.0 FP4 in our sanbox client
and when we checked the tcode HRASR_DT which is design tool for
HCM Processes and Forms under Forms and Scenarios standard forms are
listed but we don't see standard process. We tried to copy the
processes from Client 000 based on a document below and we dont see
anything under piece list HRASR_PROCCONTENT_VP in client 000 .Are we
missing any steps does the HR Renewal doesn't come up with standard
processes.
http://scn.sap.com/community/erp/hcm/blog/2012/03/21/hcm-processes-forms-mystery-of-the-missing-sample-processesor-where-are-the-pd-processes
Do we have any documentation to copy standard processes?
Thanks,
Latha.

1. Most of the process delivered for HR Professional role are based on FPM forms
Sample Processes for Personnel &amp; Organization - HCM Processes and Forms - SAP Library
2. To understand FPM based forms refer blog by Christopher Solomon here HCM Processes & Forms: the Anatomy of a FPM Form and the Secrets of How HR Renewal HCM P&F Delivers Yours
3. For testing purposes you can refer to sample process listed by Siddharth.
Regards.

Similar Messages

PO invoice through IDOC --Need Standard Process code and Message Type

Hi All,
could any one send me SAP Standard Message type and SAP Standard process code for posting Vendor PO invoice.
Thanks
Raghu

Hello,
Standard Message type: INVOIC, Process Code: INVL, IDOC type INVOIC02.
Thanks,
Venu

Standard process for creating Services and accessing Services on EBS 11i

All,
Do you have any kind of documentation that explains how we should handle Services in the EBS 11i?
We have two types of interfaces currently and no one of them uses Services:
1. We create files in some kind of gateway
2. We get files generated in a gateway or when it's the case we access different databases via database link.
I really appreciate your help.
Thanks,
Fernando

Right, but what would be all the standard process for creating a webservice?
Is there any kind of document that shows in detail how to do that? and also, how we should access webservices from other systems?
Thanks for your help.
Fernando

Standard Process for Credit Memo & Debit Memos in CRM

Dear all,
What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction?
We can successfully replicate Return Items and Replacement Items in ECC Return Order
But I don't know how to process Credit Memo and Debit Memo in ECC.
What are the Accounting Implications takes place once we create and release the credit memo / Debit memo in CRM Complaint Transaction?
How to see the entire document flow?
I can create Credit Memo for a Returned Line Item in CRM without any errors. But I could not see any follow-up transaction or process either in CRM or ECC.
Kindly educate me in this regard. Your suggestions are highly appreciated
Best regards
Raghu ram
Edited by: Raghu Ram on Jun 23, 2010 6:29 PM
Edited by: Raghu Ram on Jun 25, 2010 8:30 AM

Hi suchi,
The following would be very useful to you.
To reduce implementation time for print forms development, SAP has created a set of the most commonly used forms - Preconfigured Smart Forms:
SD: Invoice, Quotation, Contract, Delivery Note, Order Confirmation, Scheduling Agreement, Inquiry, Cash Sales, Picking List
MM: Purchase Order, Request for Quotation, Contract, Delivery Schedule, Good Issue (3 scenarios), Good Receipt (3 scenarios)
FI: Dunning Notice
All can easily adapt these forms to their requirements, saving time and money.
Hope this information has been useful to you.
if you would like to have a smartform of your own i.e a Z or a Y then there is an option to get a sap script copied onto a smartform.
the sap script for the same is -> F140_DOCU_EXC_01
Go to Txn SMARTFORMS and just put the required smart form name in FORM field and then go to the menu bar: Utilities-> Migrate SAPScriptForm and juts type in the Script name which is given above(i.e F140_DOCU_EXC_01 )
I hope this will be an amicable solution.
if helpful pls reward.
Thanks
Venugopal

Screen is frozen on apple logo and standard reset not working

All of a sudden the apple logo appeared on the screen of my 6th generation ipod classic and the standard process to reset will not work although I've attempted it numerous times. I also noticed that my ipod is not being recognized by either My Computer in Windows 7 or ITunes. I need help desperately!

So you can't the iPod to boot past the Apple logo? What happens if you try to manually force it into Disk Mode? Does that work? If so, you can try connecting it to your PC and iTunes in that mode to see if that will iTunes or your PC recognize it long enough for you to perform a restore operation.
Putting iPod into Disk Mode
B-rock

ABAP Objects and table processing (with logical databases)

I have a report that is written right now using procedural abap and a logical database. The report is structured follows (high level):
start-of-selection.
get pernr.
perform get_it0001 using wtab.
perform get_it0002 using wtab.
perform get_it0003 using wtab.
append wtab to itab.
end-of-selection.
call function 'reuse_alv_grid_display'
 exporting
 i_structure_name = 'itabstructure'
 tables
 t_outtab = itab.
So basically I'm going through a bunch of personnel numbers, getting a few infotypes and outputting to ALV. I don't see where ABAP Objects is going to help me for this particular program.
Can somebody show me where OO ABAP would make this easier? Does it even make sense to use OO when you're processing with a logical database? (Not just PNP, but any logical database in general).
Thanks in advance.

Hello Lee
I assume that the routines GET_ITnnnn are written by yourself. For reading infotypes ABAP Objects provides us with same very helpful classes as shown below:
* define data
DATA:
 gif_employee type ref to if_pt_employee,
 go_employee type ref to cl_pt_employee,
 gt_infotypes TYPE tim_tmw_itlist_tab,
 go_control TYPE REF TO if_pt_td_control,
 go_data TYPE REF TO if_pt_td_base,
 go_pnnnn TYPE REF TO if_pt_td_itnnnn,
 gt_p0001 TYPE TIM_P0001_TAB,
 gt_p0002 TYPE TIM_P0002_TAB,
 gt_p0003 TYPE TIM_P0003_TAB.
start-of-selection.
GET pernr.
* Create employee instance
gif_employee = cl_pt_employee=>get_employee( pernr ).
go_employee ?= gif_employee.
* Get master infotypes (0001, 0002)
CALL METHOD go_employee->get_master_data
 EXPORTING
 im_begda = id_fromdate
 im_endda = id_todate
 IMPORTING
* EX_I0000 =
 EX_I0001 = gt_p0001
 EX_I0002 = gt_p0002
* EX_I0007 =
* EX_I0008 =
* Append all other required infotypes to itab
APPEND '0003' TO gt_infotypes.
CALL METHOD go_employee->get_infotypes
 EXPORTING
 i_itlist = gt_infotypes
 i_fromdate = id_fromdate " start date
 i_todate = id_todate " end date
* I_FILTER =
 i_noauthcheck = 'X'
 IMPORTING
 e_result = gt_infty_request
 e_retcd = gd_retcd.
* Please see documentation of parameter e_retcd...
LOOP AT gt_infty_request INTO go_control.
 go_data = go_control->data. " get data object
* Casting
 TRY.
 go_pnnnn ?= go_data.
 CATCH cx_sy_move_cast_error.
 CONTINUE.
 ENDTRY.
* Convert infotype (semi-transparent -> transparent)
 CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
 EXPORTING
 prelp = lo_pnnnn->prelp
 IMPORTING
 pnnnn = gs_p0003.
 APPEND gs_p0027 TO gt_p0003.
ENDLOOP.
The class CL_PT_EMPLOYEE provides us already with very easy access to so-called master infotypes (000, 0001, 0002, 0007 and 0008). All other infotypes can be read using method GET_INFOTYPES.
Using these classes we have a very convenient and standardized way of accessing all kinds of infotypes.
Regards
Uwe

Problem with the standard process HR_PD_MOVE_POSITION

Hello.
I try to use the standard process HR_PD_MOVE_POSITION to change an assignment of position. I started the process via the link Start Organizational Process after that filled an Adobe-form. Later a WF 04000035 which links with the process, started. But the first step of WF ended with the status ERROR.
In the Step History tab (transaction SWI1) I see the next errors:
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
      CREATE_WIM_HANDLE - Error when creating a work item
        CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
          EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Could you tell me where a mistake can be?
Thanks.

Hi,
Could you please share if this error is resolved & how?
Thanks,
Raj

Goods Return Standard process

Hi experts,
here is the scenario:
A customer returns a prdouct he received from vendor on account of quality defects.
What is the standard process followed by industry for this return scenario both in customer and vendor R/3 systems?
Does customer sends any ASN or IDOC or any other communication to the Vendor along with the returned products?
If the vendor receives any communication in form of IDOC or ASN then how does he comes to know that the customer has sent a return delivery?

Hi Siva,
Delivery completion Indicator tick on. then no futher delivery expect from vendor or plant. even that is partial delivery also.
so, once set the delivery indicator you cann't reference the PO for further processing of doc.
Deletion line item. during creation or till the GR you can do the deletion of line item.
once receive any one GR done againt the PO then you can't set deletion indicator. even partial or full delivery happen you cann't set the deletion indicator,
because the subsequent documents are already proceded for PO like GR & IV.
SAM

Identifying standard process & GAPS in QADB with REPORT example.

Hi all,
can anyone help me, what is QADB n how to identify GAPS in QADB n standard process with an report example? what is standard process in QADB?can we convert GAPS into standard process?
PLZ ANSWER REUIRED URGENTLY.....
Regards,
Arundhathi

Hi ,
This currently seems like a bug , we have encountered this too.
work around is you have to delete the rtf files from server Siebel\client\temp\XMLP directory and upload them again so that they are not cached any more.
same on dedicated client you may have to delete relavant files form siebel\client\temp\xmlp directory and upload again.
Thanks,
Vamsi

Re: tracing execution and standard Forte messagefilters

Pierre,
There is a tech note describing some of the trace flags that will show
you interpreter profile information. This interface, the information
produced, etc. may change in future releases that's why it's a tech
note and not in the documentation set.
Hope this helps,
Bobby
This note describes how to use the execution profile collector built into
the Tool Interpreter.
NOTE: THIS INTERFACE IS UNSUPPORTED BUT IS MADE AVAILABLE AS IS TO USERS
UNTIL A SUPPORTED INSTANCE OF THE FEATURE EXISTS.
THE SUPPORTED VERSION WILL HAVE A DIFFERENT FUNCTIONALITY AND FORM.
The Tool Interpreter contains an execution profile data collector. The
collection
information can be displayed as trace output or the raw data can be collected
by the program for further manipulation and display. This information
describes the current level of support available. It is possible that this
mechanism will be updated in future releases and/or integrated into the
TOOL debugger.
The profiler only counts intructions executed in the interpreter, it doesn't
account for time spent in C++ code. However it is sill useful in finding
problems in interpreted code and for viewing the dynamic call flow of the
application.
The following trace information is available:
TRACE CALL-RETURN
This trace outputs a single indented line for each method call and
another single line for each method return. The line is indented an
amount equal to the call depth of the task calling the method. The
following information is displayed:
Task Id
Task Name
Method Name
Method Instruction Count
Task(Id=5,Name=InitialLom)Method(Name=Forte.TopClass.StartUp)
Task(Id=5,Name=InitialLom)Method(Instructions=10)
This is enabled using trace setting trc:in:50:1.
This trace can also be used to see the control flow of an application.
TRACE TASK BY METHOD
This trace outputs information about a task and all of the methods that
where called during it's execution. Each method contains information
about the number of times that the method was called and the total
number of instructions consumed by the methods execution. The task
contains the totals of all calls and instructions performed by the
task. The methods are sorted in descending order of instructions
executed.
The following in an example of the output:
TaskByMethod(Id=9,Name=projws.display,Instructions=2212)
ide.projws.updateMenus(Called=1,Instuctions=556)
ide.projws.addBlockComponentsToTree(Called=1,Instuctions=321)
ide.projwsPrefs.LoadPrefs(Called=1,Instuctions=247)
ide.projwsPrefs.Apply(Called=1,Instuctions=206)
UtilsDisplay.PrefMgr.FetchUserPref(Called=12,Instuctions=168)
ide.projws.computeWindowSize(Called=1,Instuctions=168)
ide.projws.refreshBrowser(Called=1,Instuctions=76)
UtilsBase.CompileSession.SetScope(Called=1,Instuctions=68)
ide.projws.fillToolObjTree(Called=1,Instuctions=65)
ide.projws.setTitle(Called=1,Instuctions=53)
UtilsBase.CompileSession.Init(Called=1,Instuctions=48)
UtilsBase.InterfaceBrokerBase.GetCompileSession(Called=1,Instuctions=41)
UtilsBase.InterfaceBrokerBase.LockSession(Called=1,Instuctions=30)
AppModel.abSurrogateRepositoryClient.GetRepository(Called=3,Instuctions=21)
UtilsBase.InterfaceBrokerBase.UnlockSession(Called=1,Instuctions=20)
UtilsDisplay.Workshop.Events(Called=1,Instuctions=20)
UtilsDisplay.Workshop.HelpEvents(Called=1,Instuctions=19)
ide.projws.lookupMask(Called=1,Instuctions=17)
UtilsBase.CompileSession.GetVersionStateForPlan(Called=1,Instuctions=14)
ide.projws.LoadPrefs(Called=1,Instuctions=13)
AppModel.abSurrogateRepositoryClient.GetVersionStateForPlan(Called=1,Instuct
ions=8)
AppModel.abSurrogateRepositoryClient.FindProject(Called=1,Instuctions=8)
ide.projws.resetCurrentNode(Called=1,Instuctions=7)
AppModel.abSurrogateRepositoryClient.IsDetached(Called=1,Instuctions=7)
ide.projws.selectComponent(Called=1,Instuctions=6)
ide.projwsPrefs.Init(Called=1,Instuctions=5)
This is enabled using trace setting trc:in:51:1.
TRACE APP BY METHOD
This trace outputs information about an application and all of the
methods that were called during its execution. Each method contains
information about the number of times that the method was called and
the total number of instructions consumed by the methods execution.
The application contains the totals of all calls and instructions
performed by the task.
The output is similar to the previous case.
This is enabled using trace setting trc:in:53:1.
TRACE TASK BY CALLTREE
This trace outputs the call tree of the task. The call tree shows a
method and all of the methods that it called. And for each of the
called methods the same output is displayed. This can be used to
see more of the call structure of a task. It call also be used to
find the paths in the call tree that consumed most of the instructions.
The methods are sorted in descending order of instructions executed
within each level of the call tree.
TRACE APP BY CALLTREE
This trace outputs the call tree of the application. The call tree
shows a method and all of the methods that it called. And for each of
the called methods the same output is displayed. This can be used to
see more of the call structure of an application. It call also be used
to find the paths in the call tree that consumed most of the
instructions.
The output is similar to the previous case.
This is enabled using trace setting trc:in:54:1.
The following collected information is available:
NOTE: None of the collection options are available at this time.
COLLECT TASK BY METHOD
COLLECT APP BY METHOD
COLLECT TASK BY CALLTREE
COLLECT APP BY CALLTREE
Other potential future features:
The profiler doesn't record when some interpreted TOOL code invokes a method
on a object which in implemented in C++. This causes some profile
information to be lost. If the C++ code invokes a method that is
implemented as interpreted TOOL the BYCALLTREE profile will not show the
C++ code. Thus it could be confusing because it appears that the
interpreted code called something totally different than the what is
expected.
At 10:41 AM 7/31/96, Pierre Gelli wrote:
Hello,
During the process of tuning an application, or just of making it work, it
is useful to trace the flow of processing.
There are two ways of doing it :
1) add your own trace instructions (calls to the LogMgr) at the appropriate
places,
2) use the traces of the Forte Interpreter !
If one relies on solution 1, then it relies on what the developers have
written (and thus sometime forgotten to write !) in their code.
If one relies on solution 2, then potentially it can get as much information
as is available to the interpreter (and the debugger ?), in a fully
independant way since it uses directly the code itself and not added trace
instructions.
So solution 2 seems quite interesting.
Unfortunately there are some potential problems :
a) I haven't found in the documentation an exhaustive description of the
logs the Forte tools do. The only and very short description is on page 148
of the System management Guide. It's far from being exhaustive. So it
requires playing with the filters.
I recommand trying trc:in:1-63. I guess "in" stands for the interpreter.
- level 1 seems to give the call tree,
- level 255 seems to give almost the code !
b) since the flags are not documented by Forte, how reliable and stable will
they be in future versions ?
c) what happens for compiled partitions is not clear to me (I have not tried
it yet).
So my question : are the message filters used by the Forte Tools like the
interpreter described somewhere, i.e. in some Tech Note (I don't have access
to them yet) ?
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99

From: Pierre Gelli <[email protected]>
Subject: tracing execution and standard Forte message filters
Hello,
During the process of tuning an application, or just of making it work, it
is useful to trace the flow of processing.
There are two ways of doing it :
1) add your own trace instructions (calls to the LogMgr) at the appropriate
places,
2) use the traces of the Forte Interpreter !
So solution 2 seems quite interesting.
Unfortunately there are some potential problems :
a) I haven't found in the documentation an exhaustive description of the
logs the Forte tools do. The only and very short description is on page 148
of the System management Guide. It's far from being exhaustive. So it
requires playing with the filters.
I recommand trying trc:in:1-63. I guess "in" stands for the interpreter.
- level 1 seems to give the call tree,
- level 255 seems to give almost the code !
b) since the flags are not documented by Forte, how reliable and stable will
they be in future versions ?
Pierre Gelli,
level 255 is the most detailed you are right on tracing..... As for documentation
you will want to get ahold of several good tech notes that your Forte
rep or support can get you which provide alot of the info you are after.
Let me know if you can't do this and I can send you some of this info, but you are
best to get the latest and greatest directly from Forte.
Len Leber
ATG Partners

Is there any API or standard process to create structure from backend

Hi,
Is there any standard process to create structure from backend.I want to create 300 options for a option feature from backend.
Please let me know the API through which it can be done.
Best Regards,
AJ

AJ --
Configurator provides a "Custom Import" capability to automatically create structure. It is documented in Chapter 5 ("Populating the CZ Schema") of the Oracle Configurator Implementation Guide.
However, setting up a custom import may actually take you more time than just creating the Options manually in Configurator Developer. If the Options need to be duplicated across several Models, it may be advantageous to build them as Items in the Configurator Developer Item Master instead, and then use Populators to automatically create corresponding Options within your Option Feature(s).
Eogan

Standard Process's

Hi,
Are there any Oracle documents listing the standard process's for each module? Or Process flow diagrams?
Many thanks

Are there any Oracle documents listing the standard process's for each module? Or Process flow diagrams?Please see old threads.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Product+AND+Cycle&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Life+AND+Cycle&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Standard Process's Oracle 11i

Hi,
Are there any Oracle documents listing the standard process's for each module? Or Process flow diagrams?
Many thanks

I think you want to post in the Oracle Applications forum. This one is for SQL and PL/SQL.
locking this thread

HR Renewal 1.0 FP4 navigation fails via Portal

Hi All,
We have installed HR Renewal 1.0 FP4. We are trying to use the ESS HR Launch Page (UI5) via the SAP Portal 7.3.1 SP9. The Launch page appears correctly but when
clicking the on Leave Request the Web Gui opens and the SAP Easy Access Menu
appears instead of the relevant UI5 Screen.
We have implemented the following notes:
1864001 - Resolving of system alias for launchpad service
1956146 - Shell API support for navigation with system alias in Enterprise Portal
Using HTTP Watch we have noticed that the link is resolved to the following:
http://<host_name>:<host_port>/sap/bc/gui/sap/its/webgui/sap/bc/ui5_ui5/HRESS_LEAVREQ_G/index.html
instead of
http://<host_name>:<host_port>/sap/bc/ui5_ui5/sap/HRESS_LEAVREQ_G/index.html
It seems that this is related to the Web AS Setup for the
relevant System Connector in the Portal, which is maintained as follows:
ICM Host Name: <host_name>:<host_port>
ICM Protocol: http
ICM URL Prefix: /sap/bc/gui/sap/its/webgui
Is there any recommendation on how to set up the Web AS or any idea of how to overcome this issue?
Thank
you in advance,
Michael

Let me explain the usage of reverse proxy, web dispatcher needs to be setup as reverse proxy if you choose gateway to be setup in different system. With HCM Renewal 1.0, we introduced HTML5 landing pages. We call it the lanes landing pages. The lanes landing pages has two facets two it - the User Interface (UI) - the Data The UI requires the UI5 add-on. This is something which you have already installed. The data for the UI is served up from the Backend system as a OData service via the Gateway system. The landing page needs a reverse proxy to direct the browser requests to either the back-end system where the JavaScript sources are stored, o or to the SAP Gateway system where the OData services are located " Like any Web Application, the HTML5 artifacts (html, js, css) are loaded on to your browser the very first time the landing page application is launched. For this, the browser makes a http requests to the backend system where the artifacts are stored. Once the artifacts are loaded, subsequent calls will be to fetch data from the HCM backend. HCM backend data is exposed as OData services via the Gateway. NW Gateway provides the infrastructure required to convert HCM (ERP in general) data to application/device friendly OData services.Hence Gateway is an intergral part of the whole product. In short: The Reverse proxy talks to the backend HCM system once in a session to load the html5 artifacts. But it communicates with the gateway system whenever data is requested.

T codes with similar functions in AP and AR process

Hi,
I need list of T codes which has similar functions in entire AP and AR process.
Thanks
SM

Hi,
From the menu Extras > Settings > Tick "Show Technical Names".
The look through the standard menu for AP & AR . Items with similar descriptions = Similar T-Code.
regards

HR Renewal 1.0 FP4 and Standard Process

Similar Messages

Maybe you are looking for