HR Tables -Abap dictionary-

Hi all ,
I seek the names of existing tables in the standard SAP :
1) The SAP modules (MM, FI, CRM ....).
2) Codes of SAP training.
3) The existing languages (French, English ...)
or is it for me to create them?
Best regards

Hi,
First you have to know that the infotype tables (almost all) have the same name that the infotype with 'PA' prefix. P.E.:
- Infotype 2001 - Table PA2001
A complete list of HR Tables is this thread: http://wiki.sdn.sap.com/wiki/display/ABAP/HumanResourceTables-aquickreferenceguideforanABAPHRConsultant
Hope it helps you...
Alexis Sánchez Navas
SAP ABAP Development Consultant
Molen Services and Consulting, C.A.

Similar Messages

ZSD_TABLE is not defined in the ABAP dictionary as a table"

Hello,
I created zsd_table and inserted few records
When i use this table in program system is giving error message "ZSD_TABLE is not defined in the ABAP dictionary as a table"
How can we define this table in ABAP dictionary?
Thanks

Hi,
Go to Transaction SE11
Give the table name 'ZSD_TABLE'
and click on create and enter the fileds
after entering fields give 'techinical setting' for a table by clicking on technical setting button on tool bar
save check and activate
Regards
Krishna

Customise table inconsistency between ABAP Dictionary and the databas

Hi all,
I have encountered a problem where by, I was not able to activate a table due to inconsistency between ABAP Dictionary and the database.
After I run the SE14--> Check Database object. It has show that there is a missing Unique Index(Primary Index) at the Database Level, but at ABAP Dictionary it is there.
I have try to recreate the primary index at the Database level, but failed. Because one of the primary key field is been dropped from this table.
So now, may I know how can I still make this table Active again?
Is it save to folllow the following solution that I found on internet?
Syntax error in SDCC, table inconsistency between ABAP Dictionary and the database, transport error 8 during the generation of ABAP Dictionary. When you call Transaction SDCC, a termination occurs due to a putative syntax error because a table is not known or active. When you check this with the ABAP dictionary (SE11), you notice, that the table is active or inactive, however it is not possible to activate it. The activation might terminate with the error message 'Inconsistency between ABAP Dictionary and database'. A check of the affected object also delivers this error.
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

I managed to solved this by
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

DB02 = Missing Tables and Indexes = Unknown objects in ABAP Dictionary = DB views

Hi SAP Gurus,
on our SAP NetWeaver 7.x BW (based on AIX/Oracle) I find via transaction DB02 (path = Diagnostics => Missing Tables and Indexes) under "Unknown objects in ABAP Dictionary" under DB views a BW object /BI0/.....
When I make a double click on the object, I am getting the popup window "Display not possible for this object":
How can I identify the object and clarify with the BW application expert, if needed, how to resolve this object?
I searched already via RSA1 for the object, but I wasn't able to find anything so far ...
Thanks for your help and ideas.
Best regards
Carlos

Hello Carlos
The database view in question is a temporary database object created during a query execution.
Please read this SAP note 449891 - Temporary database objects in BW 3.x to understand what that view is all about and impact if those views are removed.
The SAP notes 449891 and 1139396 suggests to run the report SAP_DROP_TMPTABLES to drop these temporary objects. Whether the objects are still required or not is a question to be put across to the BW team. If the temporary objects are removed when they are used by a query, then the query will fail.
Have a nice day
RB

BW - Unknown objects in ABAP Dictionary - DB Tables

Hello gurus,
As a result of the consistency check in DB02 transaction, our BW System is showing a high number of "DB Tables" and "DB Tables withouth unique index" as unknown objects in the ABAP dictionary.
Is there any way to solve these consistency issues detected in DB02?
Thanks
Regards

Hi Dibya,
I checked the SAP note 33814 and it tooke me to the SAP note 449891 - Temporary database objects in BW 3.X
According to the recommendations, I executed the report SAP_UPDATE_DBDIFF, and I got as result 579 secondary indexes missing in the DB from the and still the 5 DB Tables unknown in the ABAP dictionary and 2 DB Tables withouth unique index,
I executed the report SAP_INFOCUBE_INDEXES_REPAIR in order to try to repair the secondary missing indexes that were shwon but withouth getting any results.
Do you have any recommendation to solve this situation? In the original scenario the DB02 transaction wasn't reporting any missing index.
Thanks and regards,

Delete restrict for ABAP Dictionary database table

Hi,
I defined two database tables in ABAP dictionary, one with master data, and one with records referencing the master data.
I also defined a foreign key relationship in the second table, so that new entries in the second table are checked against the master data table.
In addition to this behaviour, I also want the Dicitionary to perform a check the other way round. In other words, if I try to delete a record in the master data table, this should not be possible if there are records in the second table referencing this record. Thats how foreign key relationships work in Oracle databases.
Is there a way to force this behaviour for ABAP Dictionary tables, too? Or is it possible to make the table maintenance view perform this check?
Thanks for your help!
Kind regards,
Tobias

Hello Tobias,
I can delete records in the master table which have dependent entries in the second table without an error or a warning.
How are you deleting the entries, via SM30?
If yes, you can use the [Event 03: Before Deleting the Display Data|http://help.sap.com/saphelp_nw04s/helpdata/en/91/ca9f14a9d111d1a5690000e82deaaa/content.htm]. In this TMG event you can check if the entry can be deleted at all!
If you're using Open SQL statements to delete the records, i don't think DB layer implicitly checks the dependency. You can always put an explicit check though
Btw, out-of-curiosity, is this a custom or standard table?
BR,
Suhas

Register Table in ABAP Dictionary

One of our SAP RWD standard table got deleted during the upgrade. I have a backup of that table & created it using Create Table SQL commands directly at the database level.
I did exp & imp of various tables too however in SE11 the tables created directly in database no matter Z tables or SAP Standard tables does not show up.
My question is that how to register that table in ABAP dictionary?

Table is a part of PSAPCRMUSR & does exists in schema SAPCRM.
Let me give another example:
One of SAP Table STERM_LINK got corrrupted and we did'nt knew about it for almost a month. OSS replied back saying that its a 3rd party table and we are not using any modules that would have updated/read that table. Also that table did'nt had any data.
OSS suggested that either we exp/imp that table from QA to PRD or they can send us a script which is a normal create table....... script and we can drop can corrupted table.
Now in this example if we drop that table and recreate it using script at database level, it will be unknown in dictionary.
How to solve this kind of issue?

How to update whole external table(in ABAP dictionary) from internal table at once

Hi,
How can I update the content of the external table (in ABAP dictionary) from the content of internal table data at once. I created the internal tables with out the header line, with the work area. I tried UPDATE TARGET_EXTERNAL_TABLE FROM TABLE INTERNAL_TABLE. But it returns 4 for sy-subrc and did not work.
Thank you
Regards.
CHINTHAKA

Hi Feiyun Wu,
Thank you very much. Your code worked. Is there any way to replace the whole content of the external table from internal table data ?
Regards,
Chinthaka

A standard table is missing in ABAP dictionary

We wane to use a standard program which uses a standard table(CCEE/FISISTGRD) .
but when trying to execute this pgm , itrs going into dump..
The error is CCEE/FISISTGRD doesnot exist in ABAP dictionary
Edited by: deepti Gandham on Apr 24, 2009 9:58 AM

Hi,
deepti Gandham,
I check with ECC 6.0 ,but your standard Table not there
List of the table,
/CCEE/FISI_DDVN    Slovenia VAT open period
/CCEE/FISI_SET       Seting for print programs
/CCEE/FISIFP_A       Forign Payments - account connection
/CCEE/FISIFP_B       Forign Payments in/out
/CCEE/FISIFP_C       Bank list
/CCEE/FISIFP_HAL   Podatki za HALCOM
/CCEE/FISIKOEF1    Coefficients for revaluation
/CCEE/FISIMT940     Bank statement - MT 940 - convert referenc
/CCEE/FISIOBR1      Povezava kupca z letno obr. mero za izraèu
/CCEE/FISISTGRD   Reasons for Reversal enabling to change ta
/CCEE/FISITAX        Convert Tax on sales
/CCEE/FISIZDV
Regards,
Ansari.

Number of lines in ABAP Dictionary table

Hi to all!
I've got a table in the ABAP Dictionary. Is there any function in any function module that lets know how many lines this table contains?
I don't wanna use the way to read data to the internal table and describe it using
DESCRIBE TABLE <itab> LINES <num_of_lines>.
Thanks!!!

REPORT ychatest.
TABLES mara.
SELECT COUNT(*) FROM mara.
WRITE : sy-dbcnt.

ABAP Dictionary structure for use in ABAP Mapping

Hello, I'm creating an ABAP mapping class which requires me to use standard ABAP dictionary (table) structures (ex.MARA, KNA1 etc) for the mapping as the data coming into the mapping is in that format. I'm creating the ABAP class in the PI server and do not have table structures (MARA, KNA1 etc) in the dictionary in the PI server. What is the efficient way to create these structures (as Z elements) in the PI server's dictionary?
I have the XSD of these table structures. Can I import those XSDs into the ABAP dictionary in PI servers? If yes, how can it be done? Please help!

Yes you can import it as an external definition data and create the data type based on this XSD. Go through the link below for more information on the steps to import and how to use it.
http://help.sap.com/saphelp_nwpi71/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/frameset.htm

Abap-dictionary

hi experts,
what is value table&check table in abap dictionary.
where we use it. and what is the purpose.
thank u,
cnu

Hi,
Check this link
http://help.sap.com/saphelp_nw04s/helpdata/en/e2/667092730811d2959500a0c929b3c3/content.htm
Value Table
This is maintained at Domain Level.
When ever you create a domain , you can entered allowed values. For example you go to Domain SHKZG - Debit/credit indicator. Here only allowed values is H or S.
When ever you use this Domain, the system will forces you to enter only these values.
This is a sort of master check . To be maintained as a customization object. This mean that if you want to enter values to this table you have to create a development request & transport the same.
Check table
For example you have Employee master table & Employee Transaction table.
When ever an employee Transacts we need to check whether that employee exists , so we can refer to the employee master table.
This is nothing but a Parent & Child relationship . Here data can be maintained at client level , no development involved.
As per DBMS what we call foregin key table, is called as check table in SAP.
There is 1 more important Difference in Value Table and Check Table is that:
1. The contents of the check will be used as an input help(F4 Help) for a particular field on which a check table is assigned.
But the contents of Value Table are never used in Input Help.
The Heirarchy which decides from where to used the Input Help is:
1. Input help defined explicitly in ABAP Program or Dialog Module.
2. Input Help Attached to the referenced Database Table field.
3. Using the contents of Check Table as an input help if neither (1) or (2) help are there.
4. Input help from Fixed value or Value range given in Domain.
http://www.sap-img.com/abap/difference-between-a-check-table-and-a-value-table.htm
Hope thsi helps.

Maint. Status problem for View in ABAP Dictionary

Hello, guys. I have a problem with a configuration in my Maintainence View in the ABAP Dictionary.
I have a maintainence view in my abap dictionary, When i go to the tab "Maint. Status" there, and want to change the "Data Browser/Table View Maint." from "Display/Maintenance Allowed with Restrictions" to "Display/Maintenance Allowed", an error is occured. An error message is displayed, showed "The input field contains prohibited characters (already deleted)."
So, what should I do in order to change to "display/maintenance allowed with restrictions" status.
Hope anyone here can provide me a solution. Thanks in advance first. ^^

Check below SAP help
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
events
http://help.sap.com/saphelp_nw04/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
Regards,
Atish

Unknown indexes in ABAP dictionary for a BW SAP_BW 350 ?????????

Hi all,
can anyone help me with the procedure to handle unknown indexes in ABAP dictionary for a BW SAP_BW 350 Production system?
The list of some of the indexes are as follows :
/BI0/E0CCA_C11~P
/BI0/E0FIGL_C01~P
/BI0/E0OPA_C11~P
/BI0/E0PS_C04~P
/BIC/EIEFERC~P
Thanks a lot in advance ....
Madhavi Rane

You should be able to delete and recreate indexes from the infocube performance tab, RSRV or DB02. The bigger question is why these e fact table indexes are not being handled properly. I would try searching OSS Notes to see if yo ufind one relevant for your DB;
This older Notes provides some good background
Note 594287 - DB6: Corrections to the primary index of fact tables

Abap dictionary activation problem when transfer request dev to prod

hi experts
i develop enhancement in that i append structure in afru table.
when transfering requset dev to production there is error
abap dictionary activation .
thanks
ajay

hi
problem not solve.
see below error.
Activate table ZZAFRUD
   Field RPM: Component type or domain used not active or does not exist
   Nametab for table ZZAFRUD cannot be generated
   Table ZZAFRUD was not activated.
structure zzafrud is active but in error it shows not active.
i used domain zrpm it also active.
thanks
ajay.

HR Tables -Abap dictionary-

Similar Messages

Maybe you are looking for