HR Time data button missing despite config in place correctly

The config for personel subarea grouping and absence types is correctly in the IMG. The time data button to record absence directly from IAL log is still missing.  What else is required ?  Please assist.

Hello,
Absences are directly recorded in the "Time Data" tab of the "Incident/Accident Log: Edit Person Specific Data" screen. This screen is specific to the injured person. Please select the INJ i,e. "Person Affected" role in tab "Involved" on header screen of "Edit Incident/Accident Log". Then navigate to person specific data by clicking on "Details" pushbutton.
I hope this solves your problem if you are not navigating like above.
Thanks & Regards
Pavan

Similar Messages

  • Sales Aread Data button missing in BP transaction?

    Hello,
    I am using CRM 5.0 SR2 IDES system and having a strange problem. Although I have IDES client 800 available, i copied existing client 001 to 200 using SAP_ALL profile. Now my problem is that I don't see the Sales Area Data button on the toolbar when i am creating a BP of Role Sold-To Party or any other customer type role. I have already created a Sales Org. and even assigned values for Tupel, Division and Distribution channels. And also made sure that the flag for "Object Permitted in Determination" i set for all Sales Areas. If i login into IDES client 800 then i can see this button for Customer role assigned BPs.
    Do i need to make any special customization setting to be able to see the Sales Area Data button? Also, i haven't maintained Territory Hierarchy. Can this be the reason for my problem? Can somebody please help/advice?
    Thanks and Regards,
    Vasu
    Message was edited by:
            Vasu

    My problem is fixed. The last message from user unable to see the sales area data while creating BP
    In short i did following changes to get the button visible:
    <i>check the view V_TBZJ1 in transaction SM30 and see whether the line
    Subheader Screen text Description Appl. Scrn.seq.cat.
    CRM001 Sales area data CRM CRM1 CRM001
    exist or not if not then pls maintain it.
    Also check the view V_TBZJ1C for the lines below
    Subheader Description Item number Active
    CRM001 CRM:Sales area data 2 X
    If this also not exist then maintain it.
    After this you will be able to see sales area tab when you will create the BP in role SP.</i>

  • Purchasing Data button missing in transaction BP on SRM 5

    Hi. We just upgraded to SRM 5 and have just noticed the "Purchasing Data" button has gone from transaction BP, so we can not go to partner role Vendor and see the purchasing data.
    We know we can get the same info from BBPMAININT, but does anyone know why the button has gone?
    Does anyone else using SRM 5 have the button available?
    Thanks a lot for your help.
    Regards,
    Dave.

    Hi Dave,
    I am working on SRM 5.0 and i cant see the "Purchasing Data" button in transaction BP in WINGUI.
    BR,
    Disha.

  • Record Working Time time data missing after save

    Dear All,
    I have some problem with my ESS record working time iview (CATW). All this while it was working fine until today, after I click on check entries and the save the time data, there is a message showing that the timesheet had been successfully submitted but the time data is missing form the field.
    Normally after I click on check entries and save, I can still see the time data there even I logout and login again. But now after I click save, the data is not there anymore.
    Any idea what wrong with it?
    Regards,
    Bryan

    well the times will surely be saved! Please verify
    this is just information
    If you want to prevent this message to be issued, you
    may consider a modification in the relevant function module
    HR_BALANCE_TIMES_AGAINST_DWS:
    Ganztägige Sätze
       IF BEGUZ_EXP    <> SPACE06       AND
          STDAZ_EXP    >= DAYGEN-SOLLZ  AND "<    change in ">"
          DAYGEN-SOLLZ <> 0.
         IF INFOTYPE = '2001'.              "ABW umfaßt Sollarbeitszeit
           IF 1 = 2. MESSAGE I848(P2). ENDIF.
           CALL FUNCTION 'HR_APPEND_ERROR_LIST'
                EXPORTING
                     ARBGB = 'P2'
                     MSGTY = 'I'
                     MSGNO = 848.
           BEGUZ_EXP = SPACE06.
           ENDUZ_EXP = SPACE06.
           STDAZ_EXP = DAYGEN-SOLLZ.      MESSAGE_OCCURED = 'X'.
        ENDIF.
      ENDIF."
    I think this should be callend via ESS as well

  • Babylon window displays every time i start my computer it says strings.dat is missing or corrupted how can you get rid of this?

    When i start my computer a window appears from Babylon and the message in the window is strings.dat is missing or corrupted.
    it has a button to push that says ok but when clicked on with curser nothing happens i uninstalled all babylon down loads and this was left behind would just like to get this out of my computer.
    can someone please help.

    pretty much exactly what i just figured out how to do it ealrier today! its a bug*er!
    i have posted a help request on a tech forum with logs etc incase there is any deeper infection, and will post any decent answer here. ok?
    basics for ridding of the actual babylon searchbar is like this...
    loading firefox, noticed that my google search bar wasnt google anymore and had ababylon icon instead!
    ASLO the browser displayed a FAKE GOOGLE search page!
    so i opened firefox, typed "about:config" in url bar and then you look just underneath the url bar, and you'll see another search bar.
    type babylon into it. right click on all of the results, and click reset.
    thats it now disabled totally for now.
    next go to tools>addons and look down the list and click uninstall babylon...
    bingo.
    but its not over yet! .....
    next go to start> search and type "babylon" (without the quotes) and see what comes up, mainly in programme files\mozzilla\search plugins
    and in the macromedia folder. if you get a "cannot delete.." notice, then that just means you havnt closed firefox (wich is odd coz you've apparently uninstalled the bug*er), so close firefox, then delete. you should now get rid of them all.
    it DOSNT show up on add/remove programmes, and it didnt show up on uninstall in advanced system care, though you may try the other uninstall button to the right , but you'll need to type in the "pathways" ( eg C:\my computer\programme files/etc).
    i'm still not convinced that this is the end of it though.
    from other forums i have noticed folk contacting AND phoning babylon and basaically being either abused or told they wont help.
    it seems to be invisible to AVG (i have the premium one too!) though around the time i installed the xvid codecs i did get an avg notice warning of an infection found in my t-mobile modem (dongle) but it seemed to actually be the tmobile liveupdat.exe, so i left it as i am sure i would get even worse problems if a effed around with it. (ie no connection, (eventually)
    this is th link to the posting i made on techguy
    please dont post willy nilly babylon posting on it so the volunteers dont get pist off, as that wont help if there are really deeper problems to solve. this is the link to it [[have i cleaned babylon hijack infection properly?|here it is]]

  • Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

    Missing Pictures.
    Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
    When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
    Have made back up, but unfortunately a little too late. What to do?
    MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • Detect if time/date browse button was used

    Hi,
    I have a position control vi for indexing elements inside array and displaying corresponding time and date. I have large number of control signals inside my block, but I have removed all irrelevant blocks and signal for this discussion. I have replaced all unnecessary controls with constant values, so don't waste time analyzing it.   
    If you take a look at my vi, you will see Star/Stop control, Position control and a time stamp indicator (Waveform time) with a time/date browse button from another time stamp control. I have all desired functionalities, but I have problem when using browse button for setting up time. I can't set my time two times in a row at same value because I'm comparing "Last entered time stamp" value with current one just entered. I would not like to completely change my blocks because I'm using a lot of property nodes and variables inside my project. I'm just looking for a way to figure out if time/date browse button has been pressed so I could jump to desired point in my recorded waveform.   
    Solved!
    Go to Solution.
    Attachments:
    position_control_lite.vi ‏16 KB

    I can't change Waveform Time Indicator to a Control because that would make other controls much complex (not shown in attached vi)
    I have modified my block to the simplest form. I have changed some control names.
    There is now only one problem - how can I detect if user has pressed time/date browse button? I'm not interested at this point which value has been entered.
    I need to replace User has entered value in  Jump to time/date with some kind of Boolean logic or event case.
    Message Edited by _thomas on 11-17-2009 09:23 AM
    Attachments:
    position_control_lite_lv8.6.vi ‏14 KB
    position_control_lite_lv8.0.vi ‏19 KB
    position_control.png ‏33 KB

  • MISSING: Time, Date, Battery Info

    Since the new update, the Time, Date, Battery Info, etc that is normally in the top right hand corner toolbar is gone.
    Going into system preferences to click the box for time doesn't work, because it is checked.

    I am using a Panasonic  HDC TM 300.
    I have tried copying the individual .mts files and copying the entire folder structur. Neither of these show the EXIF info in the PPro cs 4 metadata (EXIF section).
    As I said the date/time info etc  shows up in  Adobe Bridge.
    Am I missing something or is this a problem with PPro cs 4??
    Kaybee

  • Date and time keeps going missing!

    Hi everybody, my date and time keeps going missing from the top bar every time I turn on my mac - sometimes other things go missing, like the airport status.
    It used to happen just once a fortnight but after I installed the latest security update, it seems to be happening every time. Does anybody have a reason/fix? Would be much appreciated. Thankyou!

    Hi appleoclock, and a warm welcome to the forums!
    Not sure this works since that Qursical update, but the cure for that used to be...
    Apple Menu Bar Icons Gone
    You've probably got a couple of corrupt preference files.
    In "/Users/<yourname>/Library/Preferences", delete com.apple.systemuiserver.plist
    In "/Users/<yourname>/Library/Preferences/ByHost", delete com.apple.systemuiserver.xxx.plist where 'xxx' is a 12 digit (hexadecimal) numeric string.
    This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).

  • Change language of time/date browse button

    Hi. How I can change the language of time/date browse button. For example,
    i want to change the caption of button "Set time to Now", to the "Time"? Is it possible?
    Thanx.
    Solved!
    Go to Solution.

    The dialog is a VI that is part of the LabVIEW package.
    You can make a copy of this VI and edit the button text as you want.
    look for picktime.vi in your \resource\dialog\ subdirectory of your LabVIEW installation.
    Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
    If you don't hate time zones, you're not a real programmer.
    "You are what you don't automate"
    Inplaceness is synonymous with insidiousness

  • Time Data loading with missing format

    Hi expert,
    after we load time data, find the following missing information:
    0CALDAY:
    20.080.112 (Error)
    2008.01.12 (correct one)
    0CALMONTH:
    200.801(Error)
    2008.01(correct one)
    0CALQUARTE
    20.081(Error)
    20081(correct one)
    Could anyone let us know how to correct data with missing format to correct one and how to do this step by step? Many thank!

    What is the source for this data ?
    Have it corrected in the source
    Or
    Correct in PSA and load it from there.
    Does it happen only for a few records ?

  • Two Qs: Retrieve time/date & projector remove "close" button

    Dear All,
    Two different questions with regards to lingo's abilities:
    1) How can I get through a script/lingo a server's date and
    time? I want not to rely on the PC's clock (the user can change it)
    but instead get the time/date remotely to make sure it is right. I
    am thinking of getting a string from a web page the same way as
    getting the IP address from (whatismyip.com) but I can't seem to
    find any web pages that have some kind of automators.
    2) Is it possible to remove the X, "close" button from a
    projector window so the user cannot close it? I have seen some
    xtras that can do that but they are not free and I am hoping there
    is an internal director way to do this?
    Thank you for all your help and ideas. You have been very
    helpful in my previous questions :)

    1) If you have a server, you can put a server side script up
    that
    returns the time quite easily. From Director, you would use
    getNetText() to pull it down
    2) If you click on the stage where there are no sprites,
    there will be,
    in the Property Inspector, a Display Template tab. There are
    your
    Titlebar options. Uncheck the ones you don't want to see
    (like for
    example "Close Box")

  • Sms/imessage entries missing time/date stamp

    I just upgraded to IOS7.  I could not find a way to show the time/date stamp of a text.  This I used quite often... for example, if my husband texts me to say he is on his way home, I could look at the time stamp to see how many minutes ago that was.  Is there a way to put the time stamp back on the texts like it was in all the previous versions?
    UPDATE:  The time/date stamp is there, but the frequency that it puts a new time/date stamp must be fairly long.  I had a text started with my husband at 4:55.  At 5:32 (looking at the time stamp that shows up on my iMac that shows same texts my iPhone does) another text was made.  The only way I can tell when the very absolute LAST text was written on my iPhone is to back out to the menu of all my contact listings I have message conversations with.  There it shows when last text was sent... 6:20.  That is Almost 50 minutes later than the last text, it is almost an hour and a half since the initial text.But, yet all under same text date stamp of 4:55
    EXPLAINED A DIFFERENT WAY:
    4:55 first text
    5:32 additional text
    6:20 next text
    Only time stamp shown on my iphone is the 4:55, all these texts are under the same time/date stamp.  My iMac mirrors the same texts and shows all three incremental time stamps.  That is how my phone used to be.  How do I get it back?

    You should tap you scren and move like you want to move the full scren to the left! A column will appear!
    PS: What I think is that @Apple should urgently think more about UX and UI this new IOs7 is amde for pro. UN-HAPPY

  • Missing time/date stamp

    I imported footage from my Sony DCR-HC32 mini-DV into imovie (4.0.1) to edit and when I "shared" it back to my camera the time/date stamp was no longer showing. Just the dash lines at the bottom right corner of my LCD screen. I have done this procedure on many occasions and the stamp is always included. Does anyone know what happened and how can I fix it? I need the time code to appear on my final tape. FYI the clip still shows the date/time when it's clicked on.
    Thanks.

    You should tap you scren and move like you want to move the full scren to the left! A column will appear!
    PS: What I think is that @Apple should urgently think more about UX and UI this new IOs7 is amde for pro. UN-HAPPY

  • ESS Time Sheet - Print button missing

    Hi all,
    Refering to the thread "ESS Record Working Time - Print button gone in latest release?" (), has anyone actually managed to solve this in an (for the customer) acceptable way?
    Even though SAP for some reason desided to take the print functionality away for the time sheets, the customer still wants to print... So, if anyone out there know a decent solution, please share your knowledge! I´m in desperate need of help.
    Thank you very much in advance!
    /Sophie
    Edited by: Sophie Ohrn on Dec 18, 2007 1:03 PM
    Hi again,
    Is there really not any single person who has solved this? Any input is highly appreciated!!
    Thanks very much!
    /Sophie

    Did you explore the option of using the [TimeStatement|http://help.sap.com/saphelp_erp60_sp/helpdata/en/7e/33294084e6e349e10000000a1550b0/content.htm] instead?
    ~Suresh

Maybe you are looking for