HR: Time Evaluation Problem (Urgent)

Hi HR Expert,
I am Working for HCM ABAP.
Can any one tell me how to get Data from Table ZL (used in Time Evaluation) in my ABAP Report Program.
Thanks in Advance,
Regards,
Rizwan

Hi Pavan,
First of all sorry for late reply but now i use your given Solution.
Thanks for help.
Rizwan

Similar Messages

  • Time Machine problem - urgent

    My time machine has stopped backing up every hour which it is programmed to do and comes up with the following message'
    The backup disk image “/Volumes/Reginald Derek Bradley's T/Reginald Derek Bradley’s iMac.sparsebundle” is already in use.
    Can any one help please.
    Thanks
    Derek
    Mountain Lion

    Thanks for your speedy reply.  I do not have Airport utility on my system-at least I can't find it.  Did download from yor recommended site but Mountain Lion won't install it.  So what now and guess what I can't reply on my iMac - something gone wrong.   s soon as I started to type a reply spotlight oped on my system - now how crazy is that!  I,be even shut down the computer to no avail, so now two problems.   sorry to burden you with this.
    Derek

  • Time Evaluation: Problem with Absence Quotas

    Hi Gurus,
    When vacation days are keyed in advance, and at a later date are made inactive as a result of a LOA. What happens in those cases is that SAP still considers the absence valid and it remains as deducted from the vacation quotas.
    How can we prevent this and allow time eval to run correctly?
    Regards
    Naveen

    Hi Gurus,
    I will try to explain it more clearly.
    An employee records a vacation well in advance. for example, today I have entered vacation in IT2001 from 23.12.2009 - 31.12.2009. But then tomorrow I go on a leave of absence meaning I am on LOA from 18.12.2009 - 31.12.2009.
    What is happening now is since I recroded absence already, the quota has already been deducted. But later on the next day, even though I went on LOA, the system is not considering me as inactive and neglecting the absence which I recorded.
    So how should I prevent this quota from deducting?
    Regards
    Naveen

  • Time Evaluation- Kindly Help

    Hi,
    I m working on CATS where in the data is interfaced through a legacy system.
    I have the following Queries which requires an urgent response.
    •     Data from the legacy system to be transported is based on Wagetypes
    •     How to assign a Wagetype ( For example Wagetype-1000) to an Attendance and
            Absence Type and accordingly pick it up in Time Evaluation and send the data to
            Payroll
    •     I am confused of how to send the wagetype data to Payroll through Time
             Evaluation.
    Urgent help required.
    Regards,
    Reshma

    Hi,
    i have used documents this site to understand how to create time wage types in time evaluation, thrue table T554s, T555Y and T510S
    <a href="http://www.insightcp.com/res_16.htm">http://www.insightcp.com/res_16.htm</a>
    When wagetypes are stored in ZL they are processed in Payroll.
    Regards,
    Camilla

  • Problem: Run Time Evaluation for Future Period

    Hi SAP Gurus, can someone help me solving this problem:
    My client need to run time evaluation for 2-months period ahead of time. But every time I tried, time evaluation always stops at end of the current month, no further dates in the future. I had created attendance data 2002 for all the future dates. IT7, 2002, 2006 and all configurations seem to be OK (T510S,T569R). Test run is also OK with good future results. What could possibly be missing? Thank you in advance.
    Bill

    Thank you very much, Arun, Banu, Stefan and Om.
    Yes, I have entered the "Evaluation up to" date (60 days later);
    The schema has a function "Check FUT".
    Test future run result was generated correctly.
    Still I can't have future results in real run.
    So, what else I should check into?
    Thanks again.
    Bill

  • Use of Time Evaluation to generate Absence Quota

    Hi,
    We are planning to use time evaluation to generate absence quota. At the moment we are using RPTQTA00 report to generate Absence Quota. We have negative time management and since, the project has already gone live i have very limited scope to change the basic settings for example we do not have any employee subgroup to identify part time employees, PT & FT are in one employee sub-groups. We have only one ESG & PSG for time recording, time quota etc. The base entitlement is defined for the FT employees and it is reduced propertionately based on the employement percentage in IT0007. Now we are going to adopt a change in design, and planning to have specific work-schedule for PT employees. In that case, we will not have the scope to maintain %age in IT0007 for part time employees but exact no of working hours will be used. It means that system will treat the PT emploees as FT while generating absence quota and output the FT absence entitlement. As i said earlier we can not differentiate PT employees from FT employees based on ESG or PSG, i can not create a separate quota selection rule for part time employees. Hence, we are moving from running RPTQTA00 report to time evaluation for absence quota generation purpose.
    Now can anybody please help finding a alternate solution for the above, if it is possible to do it through report RPTQTA00 or we have to adopt the time evaluation. In case we are going to generate absence quota through time evaluation, can we only generate absence quota and skip anything that is related to payroll.
    Any comments/suggestion/advise will be very helpful to us.
    Thanks.
    Sujit

    We are not able to generate absence quota for part-time employees as when we do that, system is treating PT employees as FT employees and the FT base entitlement is referred while calculating absence quota. i can not define separate absence entitlement for PT employees as we have only one ESG and PSG, and based on this quota selection group is defined. The QUOMO feature is defined based on work contract - employee sub-group (there is no separate emp sub-group for PT employees) - Pay Scale Group. We are having this problem as we have specific work schedule for PT employees now (Ex. we create 3 days work schedule with 15 hours: 4.5,4.5, 6 hours) and we are not maintaining employement percentage for them. So system is treating PT employee as FT employee with 100% employement percentage. Please let me know if you need any specific info to understand my issue.
    Thank you so much for the response.

  • Time Evalution & PDC recalculation

    Dear Experts!
    I have to face an weird problem. My scenario is as below:
    1. I create a new Time Type to calculate the working date of employee in every month. My time wage type will replace an existed wage type in system, because it's configuration is not correct.
    2. After checking on Dev, QAS, the value of Earn Leave ( generated monthly) is CORRECT, we move this TR to PRD.
    And after moving it to PRD, there are a lot of employee re-run PT60 from Go Live Date. I don't know why.
    Could you please guide me the way to know which recalculation date in Time Evaluation, and How SAP decide the date to retro Time Evaluation in PT60? I just guess the field PDC recalculation in IT 3 ( I read F1 of this field), but now I'm mixed about this information.
    And you know, because we change the Earned Leave in Time ( I  run PT60) eg: Earned Leave for Feb-2010 will be modified, of course the value of Time Wage Type will be changed. The date Earliest MD change in IT3 is NOT Changed. But the Payroll for this guy is retro from Mar-2010.
    Can you please help me clear the way to re-run Time Evaluation & Payroll.
    Regards!
    Woody.

    Hi Woody,
    Please note  the below Points carefully, which may help you to solve your issue:
    Note -
    Retro Runs are based on Infotype,  If you change any Infotype related to Time / Payroll, then the system automatically maintain the "Earliest MD Change" date in IT 0003.
    For IT 0003
    1) When you change employee data that is relevant to payroll, the system stores the earliest date from which the master data change is valid. This date can be a future date after the last payroll run
    2) The system deletes the date in the Earliest master data change field after successful completion of the payroll run.
    The earliest recalculation date for time evaluation is also queried when master data and time data that is relevant to retroactive accounting is changed.
    For Payroll Controll Record
    Earliest retroactive accounting period
    1) Retroactive accounting in payroll can begin on the start date of this period at the earliest.
    2) If changes relevant for retroactive accounting have been made before this date, the system does not take these into account in either current or future retroactive accounting. However, retroactive accounting is initiated up to this period.
    3) If the earliest personal retroactive accounting date (from IT 0003) differs from the earliest retroactive accounting period, then it will be backdated to the later date.
    Comments:
    1) May be the Time Wage Type Change (related to Payroll) might have triggred the Retro Payroll, and once it retro run happens the "the system delets the date in the Earliest Master Data Change Field", that is why you are unable to find that field with values.
    2) Check the "Earliest Retroactive Accounting Period" in Control Record (Tcode PA03), so that you will get some idea. why it has happend.
    3) While determining the Retro, the system checks the IT0003, Control Record, it will take the date whichever is backdated date.
    Hope this helps.
    Regards
    Venu

  • Absence Quota Carry Forward without Time Evaluation (TQTR)

    Dear Experts,
    The client requires the left over from 2 quota types to be carry forward to 1 quota type next years.
    e.g. from Annual Leave and Casual Leave is to be carry fowarded to following year's Annual Leave. As well as the total quota for Annual Leaves cannot exceed 60.
    Now the problem is, if we were using Time Evaluation here, i know i couldve done it through TQTR, which woudve been very convinient. But we arnt generating quotas through the rule, neither are using TM00 or TM04.
    Your help and input in this regard would be highly appreciated.
    Thanks
    S.N.

    http://scn.sap.com/docs/DOC-35168
    for #1..assuming your quota follows calendar year 01/01 to 12/31. Refer to above link for more details. The idea is to do the following 3 steps in order to generate a carry forward quota bank.
    1. Setup a quota type "17" in the quota configuration and attach a daily balance time type to this quota type. E.g ZQ17
    2. Write a custom PCR...to read remaining balance for current year's quota ban on 12/31..and store this in a different time type. ZREM
    3. in the same PCR...on 01/01 (next day)...read the previous days balance in ZREM using HRS=LZREM...and assign this balance to ZQ17...this will generate you quota bank for 17 for the next year.
    for #2...
    instead of update program locking the previous years quota banks...its better for update program to create a IT2013 adjustment to 0 out the balance of the previous years quota. This can be an LSMW upload. You can get remaining balances of current quota banks for all applicable employees and then load IT2013...with reduce entitlement as radio button option.

  • Absence Quota creation during Time evaluation - Orgnaisational Assg change

    Hello Experts,
    I have one emplyee for whom the Transfer action has been run - his personal subarea has been changed from 1633 to 1654
    obviously the ps grouping for time quota type changed form 35 to 40.
    so function QUOTA is creating different quota for this employee than what there exist right now for infotype 2006.
    so during time evaluation below error is comming.
        Error entry no. 83 Error when creating absence quota
        A complex application error has occurred
    Kindly let me know how to overcome this error.
    Thanks Jay

    The reason 'error no. 83' occurs in RPTIME00 is because function QUOTA
    is trying to generate a quota type which does not exist for the employee
    on a specific day. It must have existed some time before.  Normally,
    the function QUOTA displays an error message concerning the
    non-existing quota types. In this case, the 'error no. 83' can only
    occur in the following scenarios:
    1. If you deleted a quota type that was to be generated
    2. If an employee has an organizational reassignment to a personnel
       subarea or employee subgroup which have different groupings for quota
       types and for these groupings the 'old' quota type does not exist.
    Function QUOTA checks to determine if the quota types to be generated
    are valid.  If the quota type is not valid anymore (see reason 2) then
    you will get a warning message.
    "the problem in these situations was the following:
    RPTIME00 is trying to generate a quota for a validity interval
    (defined in table T559D) during which the employee belongs to two
    different groupings, due to the transfer.
    In your case the quota type should be generated with a validity interval
    that begins before the employee's organizational change.
    Unfortunately, for the time between the validity begin up to the
    transfer of the employee there is no entry in table T556A for this quota
    type.
    or check the config of this quota running Rptquota_check in se38
    Therefore, it is possible to solve the problem by defining a dummy
    quota type for the 'old' groupings of the employee (table T556A).

  • Absence quota addition after Time Evaluation

    Hi Experts,
    This is regarding Time Evaluation.
    Time Evaluation Configuration is fine. Absence quota is getting generated in days.
    But while adding to the previous balance it's treated as hours and the net balance is coming as hours.
    Example, Absence quota from previous year = 15 hrs
                    Quota generated = 0.77 days
                   After generation the total is 15 + 0.77 = 15.77 hours.
    Please advise what could be the problem . Thanks

    Hi ,
    Thanks for your reply.
    Cause :
    Actually the employee had moved from one Personnel area to another but due to the settings same Absence quota was applicable to the employees in both cases.
    Now i am not able to delimit the record in 2006 from transfer date.
    Edited by: Tomesh Sahu on Jul 21, 2009 10:17 AM

  • Absence quota zero after Time Evaluation

    Dear friends,
    We are generating Absence quota automatically after Time evaluation. But CL/PL/SL leave quota generated is zero after TE.
    Even I am not able to edit Absence quota(IT2006) manually or through IT2013.
    Please guide me, what needs to be done.
    Regards,
    Nayak

    Hi Dracula,
    Thanks for your response. No am not able to simulate the situation, it happen just once in PRD server.
    I do agree that some one might have chaned the value. But if the quota is generated by time evaluation then you cannot changed the record directly in infotype (2006). Time evaluation generated quota can be changed on through infotype 2013.
    I do request all the expert please share your thoughts.  Please do let me know what could be the problem here.
    Regards
    Sandeep

  • How to prevent Time Evaluation to run for past date?

    Dear Friends,
    I have a problem with Time evaluation issue.
    While time evaluation runs with PDC recalculation date in 2010 its creating two different quota for an absence.
    So client donu2019t want to run time evaluation for before 31.12.2010.
    Please let me know how to do this.
    They donu2019t want to used earliest recalculation date filed for this purposes.
    Thanks and in advance,
    Anoop

    Hi,
    They want to use Earliest personal recalculation date for monthy locking.

  • Time evaluation to generate future quotas

    Hi Gurus,
    We must generate absence quotas for the future(year 2015) cause personnel must request absences for next year.
    We run time evaluation till 01/01/2015 to generate quotas: 2015 quotas were generated correctly.
    If we run time evaluation till december 2014, all entitlements of year 2015 are reset to zero( IT2006-Absence quota).
    Is this a standard sap behaviour? the only solution is to set time evaluation till the 1st of january of the next year?
    Thanks a lot.
    Marco.

    Hi Marco,
    I recommend you consider your schema and quota generation rules (V_T559L) in detail to see how system generates quota. As you know 1st of each year is a key date to generate and accrued quota to EEs.
    I think the quota generation rules check the 1st day of year and gives the quota to EE. What will happen if you run time evaluation till 2015? Is there any problem in this case.
    If you would you can make a small schema with separated PCRs just for qota generation in such a cases to run and generate just quota without any other effect. In this way you can develp new PCRs with new rules in V_T559L to generate quota at the end of 2014. You should take care the quota validation be the same as you would.
    Regards,
    Omid

  • How to fix an error  (related to work schedule rule) in Time evaluation ?

    Hi experts,
    I am getting an error while running time evaluation - PT60.
    Find the log
    Log:TimeEvaluation                                                                                General data                                                                       
    Schema ZM04 Time Evaluation Without Clock Times
    00753402 Christoudas Natalie
    Customizing error in work schedule rule 1 VM 01 5MTWTF Person rejected: 00753402
    How to fix it? Its urgent.
    Be assured of points for useful answers.
    Rajesh

    Hi All,
    I have checked work schedules and work sc. rules. everything looks fine. Reason being fine, same work schrdule rule, i.e. 5MTWTF is used for other employees, whose payroll area, personnel area, personnel subarea, employee group and employee subgroups are same.
    Why it is throwing error for one employee 753402.
    I am providing you more information. In table V_T569r, if u select recalculation category as time evaluation, it is mentioned as 01.01.2003. Initially, one action called "Conversion take on" has been maintained as on 01.03.2002, where employee had payroll area -99 (payroll irrelevant) and personnel subarea - DAYY.
    Then on 17.03.2008, another action ran "Conversion initial reassignment" where payroll area changed to "MT - monthly", subarea changed to DAYF. At that time PDC recalculation date in infotype 0003 was 01.03.2002 which was before recalculation date, i.e. 01.01.2003.
    Time evaluation was throwing 2 error messages. one was solved by changing PDC recaluation date to 17.03.2008. But other error related to work sc rule 1 VM 01 5MTWTF still occurs. 
    Can some body now provide some useful information?
    Thanks
    Rajesh

  • Time evaluation error "Error while positioning ABWKONTI" for leave entitlem

    We are currently running on SAP ECC5. Time evaluation is run with schema TQTA everymonth to create leave quotas in info type 2006.
    I am experiencing a time evaluation error "Error while positioning ABWKONTI" for one employee when running TQTA.
    This employee was engaged on 14/08/2006. When I checked the logged changes per infotype, I found that a record for 14/07/2006 was deleted. I did check all the infotypes and all is reflecting the correct start date. I would really appreciate if someone can tell me how to fix this problem. Currently the leave entitlements are being processed manually. Please see below the error I am receiving:-
    Log: Time Evaluation
    4 General data
    Successful personnel numbers
    Personnel numbers with errors
    Personnel numbers ended early
    5 Personnel Numbers Rejected
    5 00408765 Van Wyk Werner
    U Error while positioning ABWKONTI
    13A200608 0002006081320060714###%##
    Quota could not be positioned:
    2006 08 2006.07.14 2006.08.13
    Relative day in period: 13 200706
    Quota used/quota entitlement to be accounted: 1.25000
    Person rejected: 00408765
    Messages
    5 Statistics
    Selected personnel numbers 1
    Successful runs for 0
    including with errors 0
    Processing not completed for 0
    Rejected 1
    Total number of messages and error messages 1

    Hi,
    Which Function Ur using for TQTR, Check That other wise P2006 Function Used.
    I think the error is in ur PCR.
    First u Understand the business process then write the PCR.
    Send ur pcr what u had written.
    also send ur Business senerio.like Conditions........

Maybe you are looking for