HR - TIme Inbound Interface

Hi,
I'm sending an Idoc named HRSM_D01, for inbound time data to HR.
However we don't understand why sometimes it populate only the table PTEXDIR  and some other times the tables PTEXDIR and PTEX2000.
Can you guys explain me this Time inbound interface?
Thanks in advance.
Luí

Hi Luis,
Pl see my Time Inbound Interface in the HCM Forum.
Regards,
Suresh Datti

Similar Messages

  • Time Inbound Interface

    Hi,
    I'm sending an Idoc named HRSM_D01, for inbound time data to HR.
    However we don't understand why sometimes it populate only the table PTEXDIR  and some other times the tables PTEXDIR and PTEX2000.
    Can you guys explain me this Time inbound interface?
    Thanks in advance.
    Luí

    Hi Luis,
    PTEXIDR & PTEX2000 are staging tables for the Time Interface with External Time Management Systems. Data in each IDoc is stored both in PTEXDIR & PTEX2000 when you try to record Attendences/Absences. The Report RPTEXTPT reads the data from the Interface Table PTEX2000 and saves it in 2001 & 2002 PA Infotypes to be used in Time Evaluation.
    When you transfer Time Wagetypes, the data is stored in PTEXDIR & PTEX2010.
    When you transfer Planned Working Time, the data is stored in PTEXDIR,PTEX2003GEN & PTEX2003SPEC tables.
    Depending on the data transferred, the Report RPTEXTPT reads the relevant Interface tables & saves it into the corresponding PA Infotypes.
    Regards,
    Suresh Datti

  • File name with latest time stamp for inbound interface

    Hi experts,
    I have a requirement to develop an inbound interface in which I need to fetch the all files from the physical directory, and then retrieve the one with the latest timestamp. I found out the FM 'SUBST_GET_FILE_LIST', but this FM does not gives me the timestamp.
    Is there any other FM/table through which this can be achieved?
    Thanks,
    Mohit.

    Can you please try with these functionmodules???
    1)ITS_DIRECTORY_LIST_FILES
    2)CL_GUI_FRONTEND_SERVICES=>DIRECTORY_LIST_FILES

  • How to handle multiple inbound interfaces with WSDL messages

    Hi All,
    We have a synchronous: Abap Proxy -> XI -> WebService Scenario. The webservice has multiple SoapActions e.g. SearchForProduct_WithX, SearchForProduct_WithY each with different message types. We have tried to use the receiver determination to send the request to the correct soapaction using conditions e.g. if field X in the request is populated use SearchForProduct_WithX action/message.
    But when we run it through the proxy we get this error:
      <CODE>IF_DETERMINATION.TOO_MANY_IIFS_CASE_BE</CODE>
      <ERRORTEXT>Multiple inbound interfaces not supported for synchronous calls</ERRORTEXT>
    Does anybody know how we can get around this or how best to deal with the multiple soap actions per wsdl situation.

    Hi Yaghya,
    We have used conditions in the Interface Determination. Interestingly if we use an HTTP sender adapter we can use this configuration ... but once we try and use ABAP proxies we get the previous error.
    Another related question ... when we use the http adapter we get a connection time out exception. Same thing happens if we try and use the wsdl tester at /wsnavigator but we can open the wsdl through the browser. Any idea on this one?
    Thanks for all your help.

  • Error when determining the inbound interface

    Hi Experts,
    I have a Scenario, where i am using Multi mapping Scenario in DEBMDM IDOC from ECC to Xml_File-1(DEBMAS) and Xml_File-2(ADRMAS).
    When i Execute the Scenario by sending the IDOC from ECC , i am getting the below error.
    Runtime error
    Error when determining the inbound interface: Inbound interface found several times (for same sender and receiver) for the outbound interface urn:sap-com:document:sap:idoc:messages.DEBMDM.DEBMDM06
    Scenario Steps
    1) No Condition in Interface Determination
    2) 0..unbounded in Message Mapping and Operational Mapping.
    3) E1KNA1 is mapped to E1KNA1
    4) E1ADRMAS is mapped to E1ADRMAS
    5) One Message Mapping and 1 Operational Mapping.
    Thanks in Advance.
    Sriram.

    Hello,
    I have a Scenario, where i am using Multi mapping Scenario in DEBMDM IDOC from ECC to Xml_File-1(DEBMAS) and Xml_File-2(ADRMAS).
    Since your scenario makes sure that the 2 files are created, there is no need to use multi-mapping. Rather, you can use an interface determination split. To do this:
    1. declare xml_file1 as service interface 1, xml_file2 as service interface 2
    2. do not change target occurrence in message mapping and operation mapping, maintain it as 1..1
    ( 2 operation mappings)
    3. in ID, add the two service interfaces in your interface determination
    At runtime, it will split into two inbound interfaces.
    When i Execute the Scenario by sending the IDOC from ECC , i am getting the below error.
    Runtime error
    Error when determining the inbound interface: Inbound interface found several times (for same sender and receiver) for the outbound interface urn:sap-com:document:sap:idoc:messages.DEBMDM.DEBMDM06
    Were you able to declare the 2 xml_files as two separate service interface(different names) in your operation mapping?
    Hope this helps,
    Mark

  • Question about inbound interface

    Hi!
    Here, there is an inbound interface using idocs.
    My question is: if there are five idocs ready to be processed, is the function module executed five times? I mean, one time for each idoc or is there a single function module execution that processes the five idocs?
    Thanks!
    Regards,
    Cristian

    hi,  Cristian
    Actually it depend on IDOC inbound setting for your message type.
    in WE20, go to Partner Profiles:Inbound parameters setting.
    you will be request to set Process Code for Inbound.
    if you choose some Process Code, which support Packet Inbound, you IDOC will be executed Packetize.  E.G. once 5 IDOCs.
    And you inbound function also needed to support Packet.

  • PI trouble shooting: Error in inbound interface

    morning,
    I got a alert: "Error in inbound interface: POS transaction 1008 26.09.2009 1-35 Z102 0 transferred twice", but I don't know what it means. 
    I checked xml message and queue in PIP, but I didn't find anything about that.
    Please help me,thanks.

    Hi,
    You mean sxmb_moni in PIP?  but I don't know what pos transaction is.
    Well, the alert must have generated almost the same time when the transaction was run for the 2nd time, so  check 26.09.2009 entries in SXMB_MONI. But if there are lots of entries, it will be difficult.
    Try to get in touch with the functional team responsible for this and ask them to troubleshoot at their end.
    Also, check at the RWB -
    I inputed "RWB" tcode in PIP, but "Transaction RWB does not exist"
    RWB is not a transaction code. Go to your web browser for Integration Builder (from where you open ESR / ID), you will have a link to Runtime Work Bench from there.
    regards,
    Neetesh

  • LIS inbound interface & mystics

    Hi All! Can anybody explain me what is matter? I was creating LIS inbound interface. The system suggested me event and function group. I generated the interface and pointed out the place for saving in request - personal Z-package. Function module was created too. I could find my new function group through SE84. However when I tried to look own package through SE80, I didn't see new group in it. Whole day I struggled against the problem but all my efforts were without result. And I was very surprised when 3 days later the new function group suddenly appeared in my z-package.
    Can anybody explain me what is matter? What is reason 3-day lag?

    This has nothing to do with LIS or even SD. Check with your Basis admin. Maybe there was something wrong with the object directory entry of the function group or with the package. Normally Basis creates the packages and makes sure they have all the right settings. It is possible that your Basis admin ran something within those 3 days that adjusted the object directory.
    Also sometimes there are just plain glitches in SE80. Most of the time log off / log on helps.

  • How to connect to third party using PI for outbound and inbound interfaces

    Hello,
    I have scenarios where I have data coming in from third party EDI subsystem and sent to SAP. And also from SAP to EDI subsystem. We need to send the XMLs to the EDI subsystema nd also receive XMLs.
    Can someone please suggest the ways I can connect to EDI subsytem for both Outbound and Inbound interfaces.
    Thanks

    Hi Prabhu,
    EDI file is different from the normal flat or xml file. Hope you understand the difference.
    Now if your EDI subsytem has the capability of converting the xml file to edi file viceversa then create and receive the xml file from the EDI subsystem. For the xml file you may use the file adapter as an option.
    If it doesnot have the capability then seeburger adapter needs to  be used. This is not an inbuilt adapter. So your company needs to purchase it.
    Regards,
    ---Satish

  • Inbound interface was found more than once

    Hi All,
    Currently I'm working on a scenario wherein an invoice file is generated and created on FTP server, PI system picks up invoice (xml file) and sends to customer via EDI 810. The scenario failed in sxmb_moni and below is the error message.
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
      <SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI Inbound interface was found more than once (for same sender and receiver) for outbound interface
    Can anyone help me out and provide some valuable suggestions.
    Regards
    Faisal

    Hi Abdul,
    Try to run the scenario in the ID.
    There is one test tool to in directory for this, login to ID --> go to Tools --> Test configuration.
    This will show you the error in the exact step.
    -Supriya.

  • Need information on how to create Idoc Inbound Interfaces for Business Sys

    Hi,
    I'm losing it.
    Can anyone point me to some documentation or an example of how to create inbound interfaces for Business Systems in PI 7.1.
    Here's the scenario
    I'm working on a B2B integration process which sends inbound idocs to an ECC 6.0 system.
    I've created the Business System communication component  but under the Inbound Interfaces it is blank.
    I want to have MBGMCR.MGBMCR03 as an inbound interface.
    But I forget how to get it there.
    For Business components you can just add the inbound interface.
    I've already defined the Business System in the SLD pointed it to the correct Tech System, imported the idoc definitions in the Enterprise Service Builder and set up IDX1, IDX2 to ensure the metadata exists in PI.
    But for Business systems the hep says that it's got to come from the SLD.
    Outbound/Inbound Interfaces
    For each business system, the interfaces that are installed on the business system are also entered in the SLD. These interfaces are displayed in this frame. You cannot add any other interfaces.
    I know I've done this before, but I can't remember how.
    Cheers,
    John

    Hi John ,
    Please have a look at the following links which might be of help to you
    PI 7.1 IDocs interfaces act as operations
    http://www.sdn.sap.com/irj/scn/weblogs;?blog=/pub/wlg/7933
    /people/peter.gutsche/blog/2008/10/27/what146s-new-in-sap-netweaver-pi-71
    There is a section in the following link on IDOC , have a look at the links in that section
    https://wiki.sdn.sap.com/wiki/display/XI/ImportantBlogsand+Notes
    Best Regards

  • Error when trying multiple inbound interface determination for IDOC

    Hi !
    I have this scenario: File -> XI -> IDOC. 
    For each source file, I need to send multiple idoc packages, all to the same business system, but each package should be the result of different interface mappings.
    All mappings have same source and target message types...e.g. source: MT_MyFile, target: CREMAS04.
    To avoid creating a generic mapping program, we need to duplicate the current mapping program, make it handle the new case, and then add it as second interface mapping in Interface Determination, with same inbound interface, but different interface mapping, without conditions. All interface mapping should execute.
    We are receving this error:
      <SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
      <SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xxxxx/xxxx:.MI_xx_xxxxxxxx_xxx_xx</SAP:P1>
      <SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xxxxx/xxxx:.MI_xx_xxxxxxxx_xxx_xx Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xxxxx/xxxx:.MI_xx_xxxxxxxx_xxx_xx</SAP:Stack>
    Any clues?
    Regards,
    Matias.

    Hi Satish !
    Thanks.
    I need to send different IDOCs to SAME business system.
    In Interface determination I need this:
    Inbound Interface -
    Condition -
    Interface Mapping
    <b>IF_1</b>                     no condition                   <b>M_1</b>
    <b>IF_1</b>                     no condition                   <b>M_2</b>
    I need to send BOTH IDOC packages to same business system.
    But it keeps throwing the posted error.
    Regards,
    Matias.

  • Execution of Inbound Interfaces in EOIO for separate messages

    Hello XI Experts
    We have a proxy to jdbc scenario. The rquirement is like we have to delete all the data from the oracle table, insert the data records into the table,and call a stored procedure from xi which will be done sequentially. We will be sending the message in chunks of 10,000 records from the source i.e from the proxy i.e there will be different messages with unique messageids creted , directed to the receiver. we have thought of the following design  to execute the messages in EOIO.There will be 3 inbound interfaces DeleteDataMsg,InsertDataMsg(0 to n), CallStoredProcMsg and three different mapings corresponding to the inbound interfaces with different condition rules.There will be always one outbound interface which will be triggered from proxy .
    Is our design correct to implement the requirement?
    Thanks & Regards
    Sabyasachi

    Hi all.
    After taking some hints from this thread, we have found out that the problem lied some where in the installation part of PI.
    We've set up a basic script, local and not remote, and still the system would not execute that command.
    The RWB logs showed successful processing but the Application Server logs were full of errors and stack traces regarding the execution of any command. A support note was raised with SAP support in order to trace these errors.
    I'm therefore closing this question as the original question is not related with remote scripting.
    Thanks all for your help.
    Best regards,
    Romeu

  • Receiver Business System Connot find Inbound Interface - IDoc to File

    Hi Everyone,
    I am doing IDoc to File Scenario.....Idoc got triggered from SAP system and successfully posted to SAP PI.
    Now when I check in T-Code IDX5 in PI, I got one message. When I double click that I am getting following error:
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>No receiver could be determined</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Also When I am selecting Receiving Inbound interface for Receiver system, I am not getting any interface by default.
    Please help me out.
    Thanks & Regards,
    Sudheer

    Hi everyone,
    Thanks for your quick responses.
    Actually I am doing IDoc to File Scenario from blog which consists of Conditional Receiver Determination
    "SNDPFC"
    Here is the Explanation given in that blog:
    In most instances, a new Receiver Determination would be created. However, given that in this scenario the combination of the sender service (i.e. u201CGL1u201D) and interface (i.e. u201CMATMAS.MATMAS04u201D) will be used by every student, each student will instead be adding their receiver service to an existing Receiver Determination
    11. In the Condition column on that same line, left click on the question mark help icon
    12. In the following Condition Editor pop-up window, left click on the help icon in the u201CLeft Operandu201D field
    13. In the following Expression Editor pop-up window, select the u201CContext Objectu201D radio button
    14. Use the drop drown to locate and select the u201CSNDPFCu201D field and u201COKu201D
    15. Back in the Expression Editor, leave the u201C=u201D Operand as is
    16. Enter your group number in the u201CRight Operandu201D and u201COKu201D
    17. u201CSaveu201D and validate your u201CConfigured Receiversu201D as seen below:
    I did not understood this Conditional RD.
    Apart from this all configuration are correct.
    Thanks,
    Sudheer

  • Tax columns to be populated in ra_interface_lines_all table in Inbound Interface???

    Hi All,
    We are upgrading EBS from 11i instance to R 12.1.3. There is inbound interface for Recevibles transactions which fetches data from a data file and imports invoices after validation.
    In 11i, tax_code column in ra_interface_lines_all was populated to import the tax details. But, in R12 tax_code column is not used. Can anyone tell me which columns we need to populate in ra_interface_lines_all table for tax details, i can see there are many tax related columns. I am deriving tax details from zx_rates_b table.
    Which column should be used from this table as a input in tax_code(or other column) in ra_interface_lines_all.??
    Thanks
    Swapnil K.

    Hi Swapnil,
    For Tax, value to be taken from ZX_TAXES_B.TAX
    For TAX_STATUS_CODE, value to be taken from ZX_STATUS_B.TAX_STATUS_CODE
    For TAX_RATE_CODE, value to be taken from ZX_RATES_B. TAX_RATE_CODE
    For further details on the mapping refer to the oracle documentation from below reference ...
    Description and Usage of Fields in RA_INTERFACE_LINES Table (Doc ID 1195997.1)
    Regards,
    Ivruksha

Maybe you are looking for