HR : Unable to assign employees to NZ payroll areas using tranfer function.

Hi,
While doing transfer function unble to assign employees
to NZ payroll areas .
I thought there are missing entries in T549Q table for particular period but after updating this table still problem is not getting resolved. Can anyone please help me finding out the problem area.
Regards
Hema

Can any one please help me with followinf issue....
Thanks in advance
Hema

Similar Messages

Default Payroll Area using Personnel Area

Hi,
There is a feature called ABKRS i.e. 'Default value for payroll area'. I want to know if you can default the payroll area using personnel area / personnel sub-area because there is no field decision operation for personnel area/sub-area. Please guide me if there is any way out to it's solution.
Thanks,
Irfan Malik
SAP HR Consultant
SIEMENS Engineering Co. Ltd. Pakistan

Hi,
There is a provision to default the payroll area based on the Personnel area. If the PA / PSA decision parameters are not available at your end you can change the settings for ABKRS feature provided you have the rights to do the same.
In PE03 for feature ABKRS, select attributes and hit Change.
There you will see a Tab as "Struct" on the bottom left.
Click it. You will see various parameters EE, ESG, PA ,PSA, etc.
Only the ones that are selected will appear as decision parameters for the tree in ABKRS.
So if PA PSA are not selected, select them, save and then activate the feature.
Hope this helps.
Regards,
Shreyasi.

Travel management with payroll area 99

Has anyone manged to get travel management working with an employee in payroll are "99"?
We get the error message "No entry in table T549Q for argument 00 at time 11.10.2007" Message no. 56002 .
The only way I have got around this error is to create payroll areas... and would prefer not to as payroll is out of scope for this project.
Thanks for your help in advance!
Dianna

Hi Dianna
Even though you do not run payroll, you need to assign the employee to a payroll area in Infotype 0001.This payroll area should not be relevant for payroll. Generally payroll area 99 is available in Standard SAP which is used to put employees for whom no payroll is run. In standard SAP Payroll area 99 do have payroll periods generated but if these are different to your payroll period and if you need to make the travel expense payment using SAP Travel & expenses then you would have to generate the payroll period for 99. If the travel expenses are not paid thru SAP then you should be OK using the SAP generated payroll periods.
Regards
UR

What is the role of payroll area

Hai,
Exactly what is the role of payroll area in payroll as well as time.

Hi Devi,
A Payroll Area is an Accounting Area where you classify your employees to get their Payroll.
Further a Payroll Area fulfills two functions that are necessary for Payroll.
These are:
-It groups together personnel numbers that are to be processed on the same day.
-It determines exact Payroll Period.
For Ex: If you want to run Payroll for Salaried employees and Industrial Workers, you define
different Payroll Areas seperately with different Pay Periods.
(Ex. One Payroll ARea for Salaried on 1st of Every month and other for Industrial workers
on 15th of every month)
And also this is very important for capturing time data with Payroll.
Hope this will give you clarity.
Regards,
Ahmed

Can we restrict the data to be entered in payroll area

Can we restrict the data to be entered in payroll area?

Hi,
In my lilmited knowledge I think we can only default the payroll area using ABKRS feature.
We probably have to use a user exit of BADI to restrict it.
cheers
Ajay

ASA 5505 Unable to assign ip to DMZ vlan interface

hi all,
I have ASA 5505 with base license.
I created 3rd vlan on it.it was created.
but i am unable to assign IP to it.
i assign ip address it takes it.
But when i do sh int ip brief it does not show any ip.
ciscoasa# sh int ip brief
Interface                  IP-Address      OK? Method Status                Prot
ocol
Ethernet0/0                unassigned      YES unset up                    up
Ethernet0/1                unassigned      YES unset up                    up
Ethernet0/2                unassigned      YES unset up                    up
Ethernet0/3                unassigned      YES unset administratively down down
Ethernet0/4                unassigned      YES unset administratively down down
Ethernet0/5                unassigned      YES unset administratively down down
Ethernet0/6                unassigned      YES unset administratively down down
Ethernet0/7                unassigned      YES unset administratively down down
Internal-Data0/0           unassigned      YES unset up                    up
Internal-Data0/1           unassigned      YES unset up                    up
Vlan1                      192.168.1.1     YES CONFIG up                    up
Vlan2                      192.168.11.2    YES CONFIG up                    up
Vlan3                      unassigned      YES manual up                    up*************************************************************
Virtual0                   127.0.0.1       YES unset up                    up
ciscoasa# config t
ciscoasa(config)# int vlan 3
ciscoasa(config-if)# ip ad
ciscoasa(config-if)# ip address 192.168.12.2 255.255.255.0
ciscoasa(config-if)# end
ciscoasa# wr mem
Building configuration...
Cryptochecksum: 808baaba ced2a226 07cfb41f 9f6ec4f8
4608 bytes copied in 1.630 secs (4608 bytes/sec)
[OK]
ciscoasa# sh int ip brief
Interface                  IP-Address      OK? Method Status                Prot
ocol
Ethernet0/0                unassigned      YES unset up                    up
Ethernet0/1                unassigned      YES unset up                    up
Ethernet0/2                unassigned      YES unset up                    up
Ethernet0/3                unassigned      YES unset administratively down down
Ethernet0/4                unassigned      YES unset administratively down down
Ethernet0/5                unassigned      YES unset administratively down down
Ethernet0/6                unassigned      YES unset administratively down down
Ethernet0/7                unassigned      YES unset administratively down down
Internal-Data0/0           unassigned      YES unset up                    up
Internal-Data0/1           unassigned      YES unset up                    up
Vlan1                      192.168.1.1     YES CONFIG up                    up
Vlan2                      192.168.11.2    YES CONFIG up                    up
Vlan3                      unassigned      YES manual up                    up
Virtual0                   127.0.0.1       YES unset up                    up
ciscoasa# sh ver
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(9)
Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 3 days 17 hours
Hardware:   ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Int: Internal-Data0/0    : address is 001d.a24d.ed0e, irq 11
1: Ext: Ethernet0/0         : address is 001d.a24d.ed06, irq 255
2: Ext: Ethernet0/1         : address is 001d.a24d.ed07, irq 255
3: Ext: Ethernet0/2         : address is 001d.a24d.ed08, irq 255
4: Ext: Ethernet0/3         : address is 001d.a24d.ed09, irq 255
5: Ext: Ethernet0/4         : address is 001d.a24d.ed0a, irq 255
6: Ext: Ethernet0/5         : address is 001d.a24d.ed0b, irq 255
7: Ext: Ethernet0/6         : address is 001d.a24d.ed0c, irq 255
8: Ext: Ethernet0/7         : address is 001d.a24d.ed0d, irq 255
9: Int: Internal-Data0/1    : address is 0000.0003.0002, irq 255
10: Int: Not used            : irq 255
11: Int: Not used            : irq 255
Licensed features for this platform:
Maximum Physical Interfaces    : 8
VLANs                          : 3, DMZ Restricted
Inside Hosts                   : Unlimited
Failover                       : Disabled
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
SSL VPN Peers                  : 2
Total VPN Peers                : 10
Dual ISPs                      : Disabled
VLAN Trunk Ports               : 0
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
<--- More --->
Need to know does this License support IP to 3rd vlan ?
Thanks
Mahesh

Hi Julio,
I tried to config namef if but here is result
ciscoasa# sh run int vlan 3
interface Vlan3
description DMZ to 3550 New Switch
no nameif
security-level 50
ip address 192.168.12.2 255.255.255.0
ciscoasa# config t
ciscoasa(config)# int vlan 3
ciscoasa(config-if)# name
ciscoasa(config-if)# namei
ciscoasa(config-if)# nameif DMZ
ERROR: This license does not allow configuring more than 2 interfaces with
nameif and without a "no forward" command on this interface or on 1 interface(s)
with nameif already configured.

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

SCVMM Unable to assign the subnet because it overlaps an existing one

Hello,
We are using SCVMM to manage an Hyper-V cluster (2012 R2).
When we tried to create a new VLAN we got the following error:
Error (13638)
Unable to assign the subnet 172.22.172.128/25 because it overlaps with an existing subnet.
Recommended Action
Specify a non-overlapping subnet, and then try the operation again.
After revising the rest of subnets we haven't found any overlaps.
We have another VLAN defined with 172.22.172.0/25
I've checked with a CIDR calculator and the IP Range is not overlapped.
How can we define both VLANs with their corresponding Subnets?
Regards

Hi Pep,
Have you tried a different range just to check there is not something overlapping that's been missed?
I have a single C class range I then subnet up further in our SCVMM deployment depending type of VM with no issues. With associated IP Pools sat on top. In fact I have just added your two ranges with two different VLANs with no issues.
The 255.255.255.128 or /25 subnet breaks your IP range up into 0-127 and 128 to 255 as expected. There is no difference to this and further sub netting a B or C class range for a normal enterprise deployment. Granted its not a default class and
will give you two different subnets but that's correct behaviour and shouldn't be an issue in SCVMM assigning each as a separate VLAN.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Unable to assign the Ivews to Workset

Hi Everyone,
I am currently facing an issue in content admin,
I am unable to Assign the IVIEW to the workset ....
I open workset and then clicked on the iview and i find no option for assigning the iview to workset.
I tried out various options but couldn't add the iview to workset ..Please let me know whether something is missing here...
Regards,
Raj

Hi Kandara,
Please check the following posiibilities:
1. Check for Read and Write permissions for the workset you need to assign the ivew.
2.Also check your browser version if it is IE 7.
3. Also i think that you might have locked some object ,to unlock them go to system admin-monitoringunlock objects---go and select the object which is locked and after that press unlock so that the objects are unlocked now.
4. Please check whether you have opened the workset you need to asssign the ivew in property editor otherwise you will not be able to see any option .
After checking the above all possibilities try to right click on the ivew and then u will find teh option for adding to workset their you can select any one of them copy or delta link .
Hope this will help you if you face any furthe problem plz revert.
Regards
Pooja

I am unable to assign breakpoints in Flex Builder 4

I am new to Flex ( a month or so ) and have inherited a big project. This is an odd one. I am unable to assign breakpoints in a particular project. (I've redacted company specifics...)
Here is an example:
If there is a breakpoint loaded the project won't launch. It stalls after loading the first swf file...
If I uncheck the breakpoint the project will load.
If I try to insert a breakpoint after the project loads I get this:
Any help or suggestions would be much appreciated. Thanks in advance...

Hello,
1. make customizing for ledger group
make entry for a ledger group and then assign ledgers to the leger group
press New Entries then enter group name and description. as you can see below.
then mark this entry and go to ledger assignment
then enter the ledgers for you ledger group
ledger group is ready.
2. Making posting in ledger group - run TCd FB50L and enter ledger group as you can see below.
all the best erwin
Posting in ledger group

GRC 10 EAM - Unable to assign Firefighter roles to owners

Greetings SAP gurus,
I am currently on a new GRC 10 installation and having issues with the Emergency Access Management (EAM) component previously known as FireFighter or SPM. Note: We are trying to implement the Firefighter ''Role-Based" Approach.
Issue: We are unable to assign EAM roles to owners within NWBC. Click on 'Assign owners to Firefigher ID's and provision Firefighter ID's to firefighters' via the Access Management Tab within NWBC, option Superuser Assignment. Click on Assign. We are able to find the owners, but when I search for roles to assign, I get the error, 'No records found for the search criteria entered''.
We are on SP7.
Items completed:
1) All post installation tasks were completed correctly, i.e. BC sets activated, connector groups created and working.
2) EAM roles created on target system and imported via BRM.
3) EAM role properties edited for "Firefighting' usage in BRM, role owners defined, functional areas defined, business process and sub process areas defined.
4) Access control owners (i.e. role owners and controllers) defined.
5) The ID being used for configuration is currently assigned all GRC_NWBC roles available.
6) The connector groups are working fine and we are using for the Access risk Analysis component which is working fine.
7) The post EAM configuration steps has been completed.
Has anyone else experienced a similar issue? I look forward to your responses.
Rgds,
Prevlin Moodley

Hello Prevlin,
Are you using a FF role owner for the assignment. This might be helpful:
[Note 1289579 - Firefighter Owner additional authorization for Role based FF|https://service.sap.com/sap/support/notes/1289579]
Cheers,
Diego.

For an Organization unit, unable to assign Business partners in devlopment box

Dear All,
For an Organization unit, unable to assign Business partners in development-box , when i click on assign button
its navigating to organization unit only (choose relation ship)
But for production system i can assign the BP with out any issue
Can u please suggest us, do we have any settings to chose the relation ship as position...
Please find below screen image for your reference
Thanks ,
Rahul Yedapally

Vijay,
There should be some relationship attached to those BP. Select any BP for which you are getting error, go to trx BP --> Open that BP --> then go to "RELATIONSHIP" tab and check. If entries there, you can delete those realtionship and try again.
Regards
Pankaj

FM for assign employee user name to Business partner (employee) in BP t.cod

Dear alll
I need fm / bapi for assigning employee (user name) to business partner in identification tcode in BP tcode. Any one help me?

Hi Saumya Govil
I have used
1. BP_BUPA_GET_HROBJECT to get the person number based on PARTNER_GUID.
2. pass this person number to FM BP_CENTRALPERSON_ASSIGN_USER to assign user ID.
Instead of the creating new central personal number i have used above BP_BUPA_GET_HROBJECT fm.
Thanks for your quick reply.

Unable to assign supplier in shopping cart for services in SRM 7.0 SC

One particular user is Unable to assign supplier in shopping cart for services in SRM 7.0 Shopping Cart. There is no difference in the roles assigned to him. He is able to assign supplier for materials but not services. Any suggestions?
Thanks
Sanjeev

Hi
From where he is buying the Services - free text or catalog or service masters.
Do you have other users having same problem?
Have you built a custom role in your landscape. Assign SAP All to his role temporarily and see if that happens again. If so, activate the Trace on his id and ask him to order a service SC to find out where he is missing the authorizations....
Regards
Virender Singh

Unable to assign item category product in SAP CRM

when i am creating product(Material) i was unable to assign item category to Product.
In products, My Item Category (Which is created ) is not loading in Item Category Assignment block.
Plz give me appropriate Solution, Any Help will be highly appreciable

Hello Ravi,
CRM-specific questions can be posted on the http://scn.sap.com/community/crm Space, so the CRM specialists can note your question earlier.
Perhaps you can try to post this question there too.
Best regards,
Laszlo

HR : Unable to assign employees to NZ payroll areas using tranfer function.

Similar Messages

Maybe you are looking for