HR uses in SAP BW.

Hi everybody,
I would like to know, how HR is used in SAP BW. Can you create InfoCube for HR like as we do for some other modules like MM, if yes could any one give some info cubes
Is there any tables used in HR, if yes could some one give me some table names.
Could anyone help me,what would a HR module do in SAP BW.
Will assign points.
Thanks,
RR.

Hi,
"important HR InfoCube" really depends on what the business reqt or area of interest within HR is. Once you narrow down on that, then take a look at the datasources in this area and you will be able to see the tables that they pull from . For an example click here:
http://help.sap.com/saphelp_nw04/helpdata/en/29/02b43947f80c74e10000000a114084/content.htm
Data for Personnel Actions comes from PA0000 and PA0302.
Hope this helps...

Similar Messages

How to find what type of middleware product we are using in SAP CRM ?

Hello All,
Ca anyone help me in getting the information for the following :
1) How to find out what type of middleware product we are using in our Project? ( Currently our SAP CRM version is 4.0 and the middleware is using for R/3 to SAP CRM and vice versa)
2) Do we have a product called u201CMessaging wareu201D used in SAP ?
Kindly revert at the earliest .
Cheers
Sreedhar

Hi Sreedhar,
What you've mentioned is exactly the task of CRM Middleware, which sits on the CRM server and governs the data flow.
By any chance are you trying to find out about DOE(Data Orchestration Engine) used by SAP NetWeaver Mobile ?
maybe this link would help then:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/7f/c9391404c74fabb8ccc321bac64e8d/content.htm
-Rohit

How to make use of SAP NetWeaver Visual Composer in business

Dear Experts,
Can anyone help me the use of SAP Netweaver Visual Composer benefits and how it can be used to get the integerated business reult. How it helps the organisation to get benefited and how it differs from other tools.
Regards
Veeraraghavan.S

Hi,
There is loads of stuff out there on visual composer. Have a look at this link:
http://wiki.sdn.sap.com/wiki/display/VC/VisualComposer7.0
VC is supposed to allow employees with limited technical skills created web based applications which can then be used in the portal. You do need some technical knowledge but it is more easier than developing code.
Nick

What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu

Using Standard SAP Tables in SAP Tables, clusters or functions connections

Hi Gurus,
I am trying to use Standard SAP table like MARA, MAKT.. etc. in my crystal designer. When i make a new connection using SAP tables, Cluster or Functions, these tables are not listed.
Any configuration i have to maintain to list those standard table.?
With Regards,
Balachander.S

Due to performance reasons there is a limitation regarding the number of the dispplayed table names. Once you are in the connection/table browser select a table and invoke the context menu by pressing the right mouse button. Select Options and in the options panel you can use wildcards in order to limit the results to the desired range (eg. use MA% to get a list of tables starting with MA). After you close the options panel press F5 and expand the connection entry again.
Regards,
Stratos

Search help for Web Dynpro using the SAP-search help

Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!

Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen

How to use non sap application in sap.......?

hi,
anyone has any idea how to use non sap application like java class in sap through abap programming. please let me know ...
thanks in advance.
saurin shah.

Hi,
DATA: COMMAND TYPE STRING VALUE 'C:\j2sdk1.4.2_08\bin\java',
DIR TYPE STRING VALUE D:\eclipse\workspace',
PARAMETER TYPE STRING VALUE 'Helloworld'. "here the name of your java program
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
APPLICATION = COMMAND
PARAMETER = PARAMETER
DEFAULT_DIRECTORY = DIR
MAXIMIZED =
MINIMIZED = 'X' "If you need the DOS window to be minimized
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
BAD_PARAMETER = 3
FILE_NOT_FOUND = 4
PATH_NOT_FOUND = 5
FILE_EXTENSION_UNKNOWN = 6
ERROR_EXECUTE_FAILED = 7
OTHERS = 8.
check this link
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
Regards,
Satish

How to define a BW/BI system in Portal using BI SAP Query Connector.

Hi,
How to define a BW/BI system in Portal using BI SAP Query Connector.
Portal>System Administration>System Configuration-->Portal Content >New System (from PAR)>com.sap.portal.systems.bi-->
How to retrive the parameters required from a BI 7.0 System.
Thanks

Hi,
You can refer to this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/c9/b0c8ce704d40fbb18312f8e65b4b0b/content.htm
Hope it will be helpful.
Best Regards,
Assaf Klieger

SAP GTS------- SAPPI with Seeburger BIC----- ATLAS using with SAP PI

Hi All,
I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
For mapping Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
Regards,
Ramesh

>
Ramesh Gulipalli wrote:
> Hi All,
>
> I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
>
> 1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
> 2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
>
> How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
>
> Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
>
> For mapping Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
>
> Regards,
> Ramesh
> .
for converting an XML to EDI or vice versa you can use the seeburger adapter.
http://www.seeburger.com/xi-pi-adapters/

Use of SAP DMS & SAP Archive Link both together

Dear DMS Experts,
I am little bit new to DMS and have very less idea about functionalities and capabilities of SAP DMS & Archive Link.
I have got few questions:
1. Is it possible to use both SAP DMS & SAP Archive link togther.
For example, there are certain objects like GRN, Invoice, Employee etc which are not supported in standard DMS.
However, they are supported in archive link.
But at the same time, there is requirement of setting and resetting of some statuses of the documents attached with PM notification or with PR / PO. This functionality is available with SAP DMS.
So I want to know, is it possible to use SAP archive link for few objects and SAP DMS for other objects.
2. In case of SAP archive link configuration, we need to define link between Object Type, Document type and content repository
in node "Edit Links" under "Basic Customizing" under "ArchiveLink".
Here we can not use all the content repository which we have created normally. But we can use only limited content repository ID.
How does system decides, which content repository id can be used.? Where can i define that.?
3. With SAP archive link, can i store my documents in the same content repository in which I am storing my all the documents with SAP DMS. I mean to say, both the SAP DMS & Archive link, can share the same content repository.
We are having a seperate content server and requirement is to store all the documents in content server only.
Would request you all to please help.
Thanks & Regards,
Mihir Popat

..is it possible to use SAP archive link for few objects and SAP DMS for other objects...
Yes,you may use Archivelink for static documents that would be required purely for reference while DMS can be configured to handle documents that are more dynamic in nature (that require status change,version,revisions et-al)
..both the SAP DMS & Archive link, can share the same content repository.We are having a seperate content server and requirement is to store all the documents in content server only...
Yes,you may store DMS and Archivelink documents can reside on the same Content Server.Content repository is a logical area/partition,hence you may create one content repository for DMS and another for Archivelink(on the same Content Server).
Regards,
Pradeepkumar Haragoldavar

TDS returns using in sap

Dear all
how to file the TDS returns using in sap, if posible send screen shots
yours
babu

Hi,
We cannot send screen shots in the forum. We can give suggestions and possible solutions. You can use T.Code
J1INMIS for generating the TDS returns and for ETDS Return - J1INQEFILE. These can be done after updation of
Remittance Challan, Posting outgoing payment, Bank Challan Update.
Regards,
Sadashivan

Is ABAP expression FORM - PERFORM can be used in SAP BI 7.0 transformation

Hello
Is ABAP expression FORM - PERFORM can be used in SAP BI 7.0 transformations or method odf class is a recommended approach?
Thanks

SAP BI 7.x Transformations use OO ABAP where the logic that you enter into the tranformational routines (Start Routine, Characteristic Routines and End Routine) are inside METHODS. PERFORM and FORM are procedural-based ABAP and cannot be used in METHODS.
CLASS-METHOD and Function Modules are your best bets for processing outside of the transformational routine. As for performance, we use both and haven't found any signicant difference between the two (our custom Function Modules usually perform only slight better than our custom METHODS).

Adobe Forms central it useful for sap Consultant

HI all,
Last few years in sap Consultant and i worked SAP Adobe forms this Adobe Forms Central it useful for sap Consultant

FormsCentral does not have any integration with SAP.
Thanks,
Josh

Wht FM is involvd in ME57(Convrting Pur Requisation to Pur Order)use by SAP

Hi Experts,
My requirement is as follows,
For the purchase requisition lines that are copied to the purchase order, the same information should be determined and transferred as if the standard SAP program ME57 were being used. There should be a standard SAP function module that will achieve this(converting the pur requisation to purchase order). The requisition lines should each be linked to a Purchasing Info Record, so some information will be derived from there, or from the Vendor master or Material master records.
so, do u guys hv any idea that, Which Function module is using by SAP in Tx of ME 57, for converting purchase requisation to pur order?
thanq

thanq
actually, already i tried, but did not found any relavent FM.
and am wondering that, there is no such code, no such BDC, no such BAPI in this prog. of ME57 - RM06BZ00, in order to create the Pur Order-PO
I dont know , How its happening/creating??
thanq

Tables used in sap plm

hi all
can somebody give me <b>some imp. tables used in sap plm.[/b
regards.
subhasis.

Hi Subhasis,
You can refer the following tables related to the modules PS, MM, SD, PM, CO
Regards,
Harisha
AFAB       Network - Relationships
AFKO       N/W Header details
AUFK       Orders/networks headers
AFRV       Confirmations pool
AFVC       Activities assigned to WBS elements
AFVU       DB structure of the user fields of the operation
AFVV       DB structure of the quantities/dates/values in the operation
AUFK       Sales order details (N/W)
CATSDB   CATS: Database Table for Time Sheet
CATSPS   Cross-Application Time Sheet (CATS): Transfer to PS
CKIP          Unit Costing: Period Costs Line Item
CKIS          Items Unit Costing/Itemization Product Costing
CKIT          Texts for CKIS
COBRA       Settlement Rule for Order Settlement
COBRB       Distribution Rules Settlement Rule Order Settlement
RPSCO        Project info database (cost, revenues)
RPSQT        Project info database (quantities)
COSP          Cost totals for external postings
COSS          Cost totals for internal postings
COSB         Total variances/result analysis
COEP          Line items, actuals
COOI          Line items, commitments
COEJ           Line items, planned orders
BPGE            Budget, overall cost
BPJA             Budget, annual values
QBEW             Project stock valuation
MSPR              Project stock (incl. non-valuated)
LFINF      Delivery information Project System
LFINFX     Assignment delivery information to Project System objects
MLST       Milestone
MLTX       Milestone Description
MSET       Standard milestone set
NHPRPS     Number history for reorganization of WBS elements
NPTX       PS Texts (Network)
PA0001    Person responible details in HR (Emp. No., Name, etc.,
PA0002    Person responible details in HR (Emp. No., Name, etc.,
PA0003    HR Master Record: Infotype 0003 (Payroll Status)
PLAB       Relationships
PLTX       PS Texts (Library Network)
PRHI       Work Breakdown Structure, Edges (Hierarchy Pointer)
PRHIS      Standard WBS, Edges (Hierarchy pointers)
PROJ       Project definition
CI-PROJ   Project structure
RCJ_PRPSUP      Superior WBS element (for validation/substitution)
PRHI       Work Breakdown Structure, Edges (Hierarchy Pointer)
PROJS      Standard project definition
PRPS       WBS (Work Breakdown Structure) Element Master Data
PRPSS      Standard WBS Element (WBS element) - Master Data
TJ02         System status
JEST        System/ User Status by object number (WBS and Network)
TJ02T       System status texts
JCDS - history of System/ User Status by object number JEST (WBS and Network)

BAPI's used in SAP SRM

what are the BAPI's used in SAP SRM?

Dear Fazhlay,
To fetch the BAPIs related to SAP SRM goto se37 and type either BAPI* or META* for the list of bapis.
For the detailed description on the BAPIs of SRM please goto to below link as this question is already addressed there:
BAPI's in SAP SRM Module
All the Best :-)
Reward if useful

HR uses in SAP BW.

Similar Messages

Maybe you are looking for