HREAP Groups and AP limitations

Hi,
We have deployed the latest WiSM2 controllers, 3500i APs and WCS v7. Currently the HREAP Group limitation is set to 25, does anyone know if this will increase anytime soon ?
I want to allow fast roaming across multiple floors in a building so I need to cache the CCKM on more than 25 APs within the building to allow seamless roaming.

Hi there,
I believe that Cisco has addressed this with the release of the;
Flex 7500 Wireless Branch Controller
This table highlights the scalability differences between the Flex 7500 and WLC 5500 controller:
Scalability Flex 7500 WLC 5500
Total Access Points
2,000
500
Total Clients
20,000
7,000
Max HREAP Groups
500
100
Max APs per HREAP Group
50
25
Max AP Groups
500
500
http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml#sap
I'm not sure i see any other way of doing what you need currently
Cheers!
Rob

Similar Messages

HREAP Group Benefits

I was wondering if someone could lists the benefits of putting APs in HREAP groups. Here is some detail about my network. I have 52 APs in one location. Some of these APs are 1140s and some are 3500s. This location has 9 floors with an average of 6 APs per floor. Give or take a few on certain floors. Some of these floors are consecutive floors so some of the APs bleed through to other floors. These APs have 2 SSIDs. I have one SSID (lets call it WIFI1) that is being broadcasted and is using WPA2 authentication. Clients authenticate through a radius server. This SSID is also in HREAP mode. The other SSID (lets call it GUEST) is not being broadcasted and is using no authentication. This SSID is in local mode. I also have a secondary controller that these APs can fail over to if necessary. Again, I'd like to know what the benefits are if I place these APs in an HREAP group and if there are an issues that an HREAP group may cause in my network. Thanks for any feedback you can provide.

Here is my understanding of how the HREAP groups work. Please correct me if I am wrong or let me know if there are other benefits outside of this...... When APs are in the same HREAP group a client can roam to any of these APs without having to reauthenticate through the radius server. If they are not in the same HREAP group a user might notice some lag in connectivity because they need to reauthenticate?

Difference between AP groups and HREAP or flexconnect

Hi Experts ,
Can anyone please tell me the difference between AP groups and HREAP functionality?
Is the AP group for within one office location ? and Hreap is over WAN?
Regards,
Vijay.

AP groups and H-REAP/FlexConnect are used differently. AP Groups define what SSID's and WLAN to VLAN mapping (local mode) that ap's in the group will have. H-REAP/FlexConnect group is only used when the ap's are in this mode and you define ap's that are close together in that group for fast roaming if using 802.1x. If your only using pre-shared key or non-802.1x, then you really don't need to use H-REAP/FlexConnect groups. You can have ap's in both ap groups or h-reap/flexconnect groups, that is why you need to understand what each does.
FlexConnect Grups:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010001111.html
AP Groups:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01011111.html
Scott

Is there a way to create an automated job to add andupdate groups and users for Connect?

Is it possible and does anyone have experience with being able to create an automated load of new groups and users in Adobe Connect. We have an On-premise deploymentwill be setting up the application to be open outside our company to train channel partners. We have a separate database of channel partner contacts, email addresses, passwords, and training groups that they should be in based on their partner company or product knowledge. We would like to be able to create a front end database that would create a group based on the partner company or based on product knowledge. Then we would like to add users to these groups. Any knowledge of whether this is possible and if anyone has done it?

There are also size limitations or rather suggestions for particle size. If I were creating an animated 3D shape using Form or C4D and wanted to use it as a particle I would keep the size of the particle about 1/6 to 1/8 of the comp size. You would create a new comp for your particle, animate it, then nest the particle comp in your main comp, turn off visibility, and then use it as a particle in Particular.

How to create Groups and Group Leaders in Clusters.

Hi,
As we know in unicast there is one to one communication and there are groups to control the Thread
Management, How the Groups and the Group Leaders are created.
Regards,
Vardhan.

Unicast clustering uses TCP/IP sockets to pass cluster messages between members. To avoid requiring each cluster member
to have connectivity to every other cluster member, WebLogic Server uses a group leader strategy whereby the oldest member
of the group (in other words, the server that was started first) is designated the group leader. All members of the cluster
connect to the group leader so that the group leader acts as the relay point for cluster messages between members.
If the group leader goes down, the next oldest member becomes the new group leader.
As you can imagine, the group leader strategy works well for small groups but becomes less efficient as the number of members
of the group grows large. As such, WebLogic Server uses a multiple group leader strategy where it limits the number of members
in a group to 10. If the cluster is larger than 10 members, WebLogic Server splits into two or more groups, each with their own
group leader. The group leaders themselves are all interconnected to minimize the number of hops that a cluster message must
traverse to reach all cluster members.

Groups and pTOC

Never even thought about them before, so I'm only vaguely aware that Groups are available at book level. Can I pull a selection of files into a group and then generate a ToC just for the group? or is there some other mechanism better suited for this task?

Niels,
The grouping and section functions were meant more for structured authoring. IIRC, you're still limited to a single autogenerated TOC in a Book. However, you can always create a Book of Books where each one has it's own TOC. The only drawback is that updating the Master book, doesn't automatically update the TOCs in the child books, you need to update all child books first.
Some background info on Hierarchical books are:
http://blogs.adobe.com/techcomm/2009/06/numbering_in_hierarchical_books.html
http://blogs.adobe.com/techcomm/2009/09/fm9_hierarchical_books_new_variable.html
http://help.adobe.com/en_US/framemaker/using/WSd817046a44e105e21e63e3d11ab7f7561e-7fff.htm l#WSEF10C846-B0B5-4957-ACFB-AC3996F78F9B

How many AP will wlc 5508 support in HREAP Groups?

Hi,
I have a new deployment of 44 3502i AP's in 3 buildings at one of my campus'.
The 5508 wlc is running latest 7.0.116.0 code.
I have some users who take their work with them as they go from location to location on this campus.
They need to be able to smoothly switch from AP to AP without having to reauthenticate each time the next AP takes over in the handoff.
On the ssid in question we run 802.1x back to 1 auth server; there is no failover auth server.
All APs are in one AP Group.
My thought is to add all 44 of the APs to one HREAP Group.
Will this be the best/simplest solution?
Thank you

Scott,
Thanks!
I thought hreap groups had a hard limit but I could not remember and I did not find the document when I went looking.
That was exactly my question, how many APs can be in an hreap group.
Since I have 44 APs I will probably break it into 2 hreap groups. The office group and the DC group.

Record Group and From-Clause Datasource

I need to do several complex queries (read-only) for my form. Original I used From-Clause datasource but, as the requirement changed, there are some limitations. I would rather no do anything dynamically if as all possible because there are over 20 such queries which makes the code difficult to maintain. I wanted to be able to reference block items in the query.
I'm thinking about using Record Group query instead. What are the differences in capability between Record Groups and From-Clause Datasource?
Thanks.
Clayton.

Thanks.
That's exactly the problem I have. I don't want to use LOVs so I've been thinking about how to visualize the record group data using data blocks. Perhaps I'll just go with dynamically building the From-Clause.
I've looked into stored procedure based blocks a bit; it was confusing for me. Are the stored procedures stored in the database or are they defined in the form?

Item grouping into groups and subgroups

In case there are a lot of items in Business One, companies usually group these by item groups. In some cases when there are thousands of items, these are further on divided into subgroups by using UDFs. Then when you are making, say a sales order, you first look for the item group and then for the subgroup. This is where it gets tricky. You can only display the code when browsing for subgroups. It is not possible to display the value within the description field (I do not know how to do it). The code lenght is limited to 8 characters and hence makes it difficult to write a proper description for this subgroup. Is there any way to overcome this issue?

Hello,
thank you Gordon and Deepak for your efforts. First level grouping (B1 standard) by item groups is working fine, the second level just displays codes. The issue is that the value within udf-field on item master data card (on the right-hand side) does display correctly. However when I search for this item, say when making a sales order, I will just get the value, not the description. It makes no difference if I select it in the document settings to display as visible.
Codes and description for this udf-field are as follows:
Code Description
100    Roses
110    Tulips
120    Lilies
Now when I sort this field by subgroup value, it only displays 100, 110 etc.
All help is appreciated.
Thanks,
Samuli Ajo

How to manageimported users, groups, and computers in the "Magic Triangle"

How do I manage imported users, groups, and computers? Server Preferences versus Workgroup Manager? I can import users and groups with the former but it offers limited configurable options. I can view all users. groups. and computers (from active directory) in the latter, but it does not designate which accounts have been imported.
I've got a magic triangle setup, with my users, groups and computers in Windows Active Directory, and my MacOS X snow leopard server setup as a directory master, abd bound to AD as well. I wish to apply group policy like settings to my Mac OS X leopard and snow leopard clients.
Here's a summary of my goals:
1. Time Machine Storage for mac users when they logon to Mac OS X computers.
2. Automount group shares located on the Mac OS X Server.
3. Redirect user desktop and document folders to user shares either on the Mac OS X server or my Windows file server.
4. Automount a custom folder (for each user) located either on the Mac OS X server or my Windows file server.
5. Setup Mac OS X server as a printer server with quotas for all mac and windows computer users.
Goal #1 appears to be working. "need help with the rest. Thanks

I'm not sure you want to import users to use the magic triangle properly. I think importing creates 'Augmented Records' - the user icons have blue dots.
The principle is this…
Bind the server to Active Directory (AD) & create an Open Directory master (OD). This can be done from Server Admin, in the OD section, via the change button.
Then you use Workgroup Manager, set the viewing directory (tiny little globe in top left) to use LDAP records on the server - LDAPv3/127.0.0.1. Authenticate (lock on right of toolbar) add a group, then switch to to its Members tab, click + Then change the user list to show the AD records & add the AD users to the OD group. It sounds weird & wrong, but it is how it works.
You are never modifying the AD records, just assigning a group to the users in OD. It's why the clients need to bind to AD & OD.
From there you can set the Managed prefs (MCX) for the members of the OD group. It also helps to add a guest computer account to OD to assign computer prefs based on the macs that bind to the server - it's in the File menu when you select the computes list in OD.
I hope that's clear, not sure I can help with the other tasks, but they tend to fall into place once you have the complex start in place.

Grouping and Effects

Coming from Cubase I'm sort of lost at this one...
If I create group, and need to put a i.e. reverb on that group. Do I have to use the busses or is there a way to put 1 reverb a ONE track that will affect all of the tracks within that group?
Thanks

this isn't really a logic/cubase thing, it's a standard techniques of audio production thing that has been around since before DAWs.
like with most things, you have options. if you want to have a group of tracks use the same verb, then you can put it on a bus and send individually from each track so as to have control over the amount of reverb each track will have. or, you can just assign the output of the tracks in your group to go directly to the bus with your effects on it, and then they will all come through that bus channel as though they were all on the same track, so any inserts on that bus channel will affect them all equally.
the different approaches have different reasons for being used, and as I said before it's not a logic/cubase thing, it's a choice you make in your technique for certain tasks. usually for reverb you would use effect sends so as to have more control over the send for indivual components. but if you want to apply bus compression/limiting to a group of elements in your mix, say, backing vocals, then you are better off just outputting those parts to a bus and using its inserts to set up your dynamics effects chain.

FIM Group XPATH filter limitations

Hi,
We have reviewed the XPATH filter limitations as per: http://technet.microsoft.com/en-us/library/ff356871%28WS.10%29.aspx
However, are there any limitations / best practices as to the number of XPATH filters per Set / Group?
For example, we may have a FIM Group that may be made up of 24 different 'OR' XPATH filters - would this be a performance hit on FIM? Is there a limit on these?
Thanks,
SK

Hi Shim,
While there are not perceived limits on the amount of XPATH filters you can define, there is typically an issue when FIM has to calculate the actual members during said configuration change. For example, after defining the filter for the group and
submitting the change, the portal may timeout during processing. As such, in order to successfully submit a large XPATH filter, you may need to adjust the portal timeout threshold:
http://blogs.msdn.com/b/darrylru/archive/2010/02/02/extending-fim-timeouts.aspx
If your change is successful, then your XPATH filter should be fine. It will not affect FIM operational, day-to-day performance from what I've seen.
A better way to define complex filters is to combine multiple memberships into one. For example, in some sets I have defined in the past, I have created three or four separate working sets whose collective membership gathers what is needed. I
then create an "overall" set and perform a collective computed member filter, i.e. /Person[ObjectID = /Group[DisplayName = 'sourceSet']/ComputedMember
Hope that helps!
Regards, Jose Garza | MS: Svr Virt, MCTS:FIM, MCSA:2003 | http://josetheadmin.blogspot.com

Grouping and Decimal characters in rtf templates.

Hi guys and girls,
I’m really struggling with a problem here regarding the decimal characters for the prices in my output.
I'm using XML Publisher 5.6.3.
My goal is to control the grouping and decimal character from my template.
The numbers in the XML data file can either be 10.000,00 or 10,000.00. The format is handled by the users nls_numeric_characters profile option.
The output of the template shall be based on the locale and not the data generated by Oracle Reports. For example: Reports to US customers shall show the numbers in the following format 10,000.00. Reports to our European customers shall show the numbers in this format 10.000,00.
How can I achieve this in my templates? Can it be achieved at all?
Thank you in advance.
Kenneth Kristoffersen
Edited by: Kenneth_ on May 19, 2009 1:30 AM

Hi,
Thank you for your reply.
The problem is that the report is generating the output based on the users profile option nls_numeric_characters.
I have tried to override the users profile option in the before report trigger without any luck. I can alter selects so the query gets the numbers in the right format but then I would have to go through all queryes and reports which seem a bit wrong? Especially for the standard Oracle reports.
BR Kenneth

Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount 28

Post Author: tadj188#
CA Forum: Formula
Needed: Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount > 28
Background:
1) Report SQL is created with unions to have detail lines continue on a page, until it reaches page footer or report footer, rather than using subreports.    A subreport report is now essentially a group1a, group1b, etc. (containing column headers and other data within the the report    with their respective detail lines). I had multiple subreports and each subreport became one union.
Created and tested, already:
1) I have calculated @TotalLineForEachOfTheSameGroup, now I need to sum of the individual same group totals to get the total line count on a page.
Issue:
1) I need this to create break on a certain line before, it dribbles in to a pre-printed area.
Other Ideas Appreciated:
1) Groups/detail lines break inconveniently(dribble) into the pre-printed area, looking for alternatives for above situation.
Thank you.
Tadj

export all image of each page try like this
var myDoc = app.activeDocument;
var myFolder = myDoc.filePath;
var myImage = myDoc.allGraphics;
for (var i=0; myImage.length>i; i++){
    app.select(myImage[i]);
    var MyImageNmae = myImage[i].itemLink.name;
    app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
    app.jpegExportPreferences.exportResolution = 300;
       app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
    alert(myImage[i].itemLink.name)

What is difference between user group and reference user group?

hi
guys,
what is difference between user group and reference user group?
your regards
p.suresh

Hi ,
Chk the link below for your clarifiacation.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
Hope it helps.
Regards,
Amit
Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM

HREAP Groups and AP limitations

Similar Messages

Maybe you are looking for