HRESS Pay Statement - Add new Column in Overview and Selection table
Hello,
I want to add a column in the "Overview and selection" table for a pay statement service. I want to add field called "off-cycle reason" (OCCAT field from pay result).
Is there any work around to do the same?
I feel we may need to implement a BADi to do so.
Thanks,
Bhushan
Hi Bhsuan,
Please refer to the below link.
http://scn.sap.com/thread/1486215
The badi XSS_REM_INTERFACE needs to be implemented.
Regards,
Ananth
Similar Messages
-
Add New column in the Display Specification: Hit List (CGE2)
Hi,
My Scenario is to add new columns (AUTHORIZATION GROUP and CREATED BY) in CGE2 T-code.
At the hitlist of the workbench in transaction CGE2 there can be selected several columns(Ex:specification,Desc.specific.type,packing name etc), but we need to add new columns for (AUTHORIZATION GROUP and CREATED BY) for the perticular specifications.
Please let me know how to make the changes for standard things or any exists or badi's are available..
Replies would be appreciated.
Regards,
RaghavaTry to check whether there is any enhancement spot available and create a spot.
Example: sample steps for doing it.
If you are trying to modify standard program. Ex: RV60AFZZ
1) Go to SE38
2) Display program RV60AFZZ
3) Switch to Front-End Editor (New)
4) Click Spiral icon(Shift+F4) on the tool bar
5) From Menu options EDIT-->Enhancement Operations --> Show implicit enhancement options.
6) Now on the left hand corner you will see and arrow indicator where you can enhance the code. select the line example for this program Line 39, from menu EDIT--> Enhancement Operations --> create. on pop-up include the new column.
I hope above example will help you to close the thread.
Regards,
Sairam -
Vendor Invoice - FB60 (simulation - add new column in display overview)
Hi experts,
Requirements: Upon FB60 simulation, Display Overview Screen to Add new column of Internal Order Description to the Line Item ALV grid display.
Environment: ECC5, Program in scope: SAPMF05A, Tcode in scope: FB60
Changes done (not in sequential order):
1) added new field AUFTXT to CI_COBL. ALV layout structure BSEG_ALV has new field AUFTXT after changes to CI_COBL.
Debugging result:
1) subroutine alvbseg_data_init populates alv data to display. All relevant structures used include BSEG, BSEGL, BSEZ, BSEU.
2) alv data table GT_BSEG_OVERVIEW gets data from BSEG and BSEGL. BSEGL can populate additional information like Internal Order description.
3) However, in the SAPMF05A program, there is no exit or enhancement point since its not ECC6.
Please give some advice how to solve this other than modification to the program SAPMF05A or adding the internal order description field to table BSEG? I had checked BTE function 1120, 1140 and 1650, they are not triggered upon Simulation of Overview display.The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand. Your question pertains to SAP [ERP Financials|SAP ERP Financials; which is covered by another forum. Therefore your message has been moved. Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team -
Is it possible to add new columns with format "Text" once a table is linked to a form
Is it possible to add new columns with format "Text" once a table is linked to a form in Numbers for iPhone or is it impossible and thus a serious bug?(Rating stars and numeric vales seem to work.)
Those bugs happen both for new speadsheets as well as existing onces, like the demo. When you are in the form only the numeric keyboard shows up.
Pat from the Apple Store Rosenstrasse/Germany approved that it looks like a Bug during the Numbers Workshop I was in: It is not possible to add new columns with format "Text". I reported the error for Version 1.4 but there is no update nor do I get statement of understanding the issue.Hi Knochenhort,
I see what you are talking about now. Without knowing how the program actually works, I think this is what's going on:
When you add a new column to an already existing table (with already existing formats), the new cells come already formatted like the previous column. So when you add a column to the end of the demo table, the cells are already formatted like stars, and when you add a column to the beginning, they're already formatted like number.
I think this is why it's different when if you add columns to a table with blank (unformatted) columns. In that case, the new cells aren't already "tainted" with a set format, so you can change to text format without issue.
It seems like the problem is that you can't format cells that are already formatted as "number" as "text" format (even if it doesn't look like they are, because they are blank). IMO, this is a bug! This is why you don't see this issue when adding columns to a new table, because the new cells don't already come with a format.
To workaround, you can highlight the body cells after adding the new column, and delete the cells. This will "clear" the formatting, so you can then go in the inspector, format them as text, and the correct keyboard will pop up.
Hope that helps! -
How to add new columns in materialized view
We are using Oracle 10g Release2.
We need to add new columns to a prebuilt fast refresh materialized view. We want to add 4 new columns in this table and make them part of select statement in the materialized view. We can drop the view but we cannot do complete refresh after that because the paymentsInfo table has a creation_timestamp column which is populated by before row insert trigger with systimestamp. If we did the complete refresh, all values in this column shall be changed.
CREATE MATERIALIZED VIEW paymentsInfo
ON PREBUILT TABLE
REFRESH FAST
ON DEMAND
START WITH SYSDATE
NEXT SYSDATE+5/1440
WITH PRIMARY KEY
DISABLE QUERY REWRITE AS
SELECT PAYMENT_ID,BATCH_REFERENCE, TRANSACTION_REFERENCE, NO_OF_TRANSACTIONS, DEBIT_ACC_NUM,... from payment@dblink
I want to know is there any other way to add new columns without losing any changes from the master table.
Thanks.There is no way to add new Columns to Materialized view. To add new columns, it has to be dropped and re-built again.
Extract from Oracle Documentaion:
Use the ALTER MATERIALIZED VIEW statement to modify an existing materialized view in one or more of the following ways:
To change its storage characteristics
To change its refresh method, mode, or time
To alter its structure so that it is a different type of materialized view
To enable or disable query rewrite
If you have a problem of Complete refresh, then It may be beneficial to get the backup of the MView; Drop and re-create it with modified definition; Restore the backup data leaving the new columns untouched (assuming they are to be kept as fetched from the Master site). -
Add new column in PO Schedule line.
-Currently Container# and Port is stored in table EKET
-Add new columns in PO schedule line items and show the above two fields
Please help me in this.
How to add above two fields in standard transactions ME21n/Me22n/Me23n
The answer is User Exit.
The next question is how to find,write,configure an user exit..
-
Add new column in RFUMSV00 program
Hi,
I am new in abap. I have requirment to add new column in VAT report. I have copy RFUMSV00 program to 'Z' program and want to add new column in 'Z' program. The column is BSEG-ZNUOR(Assignment).How can i add a column in report and how to retrive data from BSEG table, If any one have code like this requirment , please give me some idea about this.
Thanks in advance.
Regards,
Souravyou need to read program carefully first possible than do debug.than find the exact location where system ALV generates here you need to add your field.
May be i it helps you.
search with term in mention prg ASSIGN gt_alv TO <gt_alv>. you will get idea where you need to add your own field
Edited by: Amit Gujargoud on Aug 27, 2008 9:44 AM -
How to add new column in Report ME2L
Dear Sir,
We are using ME2L for various purposes . In the ME2L report we need to add 2 new columns i.e Item Delivery Date and WBS Element .
Although in the standard ME2L report , after the basic list generation , there have been provided 2 icons for getting the report displayed with either WBS Element or with Delivery Date . It means we can not get both the column Delivery Date and WBS Element available simultaneously in the standard ME2L report .
We request you to kindly guide us as how can we add these column in the ME2L report pl . We are on ECC-6.0 and not having enhancement package 4.0 .
Kindly help us pl .
Regards
Sonia AgarwalHI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar -
How add new column in analysis from two subject area
which is the right way to add a new column to an existing combined analysis from two subject areas?
if I add the new column first in my two combined queries, then I saw a new column in the results column panel, but this new column is empty and I can't edit its propreties (the button edit column doesn't work). I can't even save the modified analysis due to a "bad xml" errror.
if I try to first add a new column from the results panel and then in my combined queries, obiee says that new columns are not of the same type.
I suppose this is because the new column in results panel has no aggregation formula, unlike new columns in queries.
But I don't know how to change the properties of the new field in the results panel, with no subject area available.
I have to restart from a single subject area? possible?
In this case, there is a way to save/copy filters ecc. from the old analysis?
If anyone can help.
Thanks
LucWhen you are using union clause in analysis or combining with other subject area you suppose to have same number of columns and their datatypes with other analysis.
for datatype issues you can use cast in column expression in each analysis. If you want to add a column only from 1 analysis just add and in other analysis use dummy column with exp 0 or ''(for char) based on the datatype.
These you have to deal with each analysis.
If helps pls mark -
Add new column to report S_ALR_87013568
All,
I have given a requirement to add a new column in the sap standard report S_ALR_87013568.
Any info how to enhance this report.
1. one suggestion given by my collegues saying we need to new report. I don't have any info how this report is created. is this report created using report or some other tool ?
2. Cloning of the same report into a new name and make changes. is it right way ?
a®This report is developed by using report painter.
you will be able to add new column by changing th report layout / form. you can do this in CJE4. or else create new form by copying the form 11ERL1E and change the columns. then you create a report in CJE1 assigning the above form. -
How to add new column in report painter
Hi Experts,
I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar -
Add new columns under schedulines tab in SO
Hi Gurus,
Can we add new columns in SO schedulines tab?Example between Delivery Date and Order qty.
I know that changes in standard programs are not advisable, but I'm not sure if it is actually applicable using user exists or others.
Thank you.hi,
why dont you try status profile in sales document type?
create status profile in BS02,
assign status profile in VOV8-transaction flow-status profile
regards
senya -
How to add new column in screen painter
Hi
I have try to add new column on existing screen and test screen in se51, the column is added in position correctly. But when I run program call this screen, the added column is placed as the last column.
Please help.
ThanksThank for your replied.
I have check the table control, it has fix column. So, I set fix column to 0 at table control but when execution by program call it's still not update what I have changed. (On test screen in se51, it come out correctly and updated)
So, I don't know why I use program call this screen, the screen is not updated what I have try to change but, when execute in test screen it come out correctly
PS. I have check attribute, it's numbered right.
Please help !!
Edited by: VerdamFK on Oct 4, 2010 8:11 AM -
How to add new columns in predefined matrix in system form
Hi all,
I am new to SAP B1. I am going to add New column to Good Receipt PO matrix. I faced the one error " Matrix Line Exists " While adding new column to good receipt PO matrix".
=========================================================
Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
oMat = oForm.Items.Item("38").Specific
oCols = oMat.Columns
oCol = oCols.Item("U_MyCol")
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_LOAD And pVal.BeforeAction = True And pVal.FormType = "143" Then
Try
oForm = SBO_Application.Forms.Item(pVal.FormUID)
oMat = oForm.Items.Item("38").Specific
oCols = oMat.Columns
'oCol = oCols.Item("U_MyCol1")
oCol = oCols.Add("U_MyCol1", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oCol.TitleObject.Caption = "Qty Accepted"
oCol.Width = 40
oCol.Editable = True
oCol = oCols.Item("U_MyCol1")
Catch ex As Exception
SBO_Application.MessageBox(ex.Message)
End Try
End If
oDBDataSource = oForm.DataSources.DBDataSources.Add("PDN1")
''oEdit.DataBind.SetBound(True, "PDN1", "U_QtyAccepted")
============================================================
And i also added for Datasource to Databind. what there is no result ??i wanted Clear information regarding this to add new columns in matrix in middle of Matrix items. I wanted Clear coding& information for this to add new Columns in Matrix ?help me regarding this asap??
Regards
ANANDAnand,
If you use the "search" feature of this forum and type "add column", you will find many posts that may help you such as this one ...
How to add a column on sales order matrix?
HTH,
Eddy -
Add New Column in ALV Report of Standard SAP ME28.
Hi anybody,
I want add new column in alv report of standard SAP Program ME28 Screen.
Add Last PO Price column inside ALV Report ME28 Screen.
Can u please anybody tell me how to add new column in ME28 Screen.
Thanks
S.Muthu.Try to find any BADI for the same
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
OR
Also one more option is to copy ME28 and, make modifications to the copied program.
Maybe you are looking for
-
So heres the deal, I updated my iphone and in order to put any music on it or even ringtones I have to have the most updated version of iTunes, unfortunately my macbook wont allow the update, I do have a lot of pictures and song stored on here but I
-
Hi All, I am using BAPI_GOODSMVT_CREATE to create goods movement .its sucessfully excuted. Now I want to store Document Number in Ztable which is getting from MB11(Goods movment create). Plz suggest how i proceed? Thanks in Advance... Regards Steve
-
Pre-built website businesses how to get into dreamweaver?
Hello, I just purchased a monthly membership to a website that is selling "scripts". Pre-built website businesses that I am able to download and edit as i like. I also recently dowloaded dreamweaver and look forward to learning how to use it. I'm
-
Hi All, I am trying to create inspection lot from QA07. My selection items include material , plant , batch and from "additional goods movement" tab I have selected "lot creation only" and Initial run in days "1". But inspection lot is not creating a
-
Trouble with some code help please
i need help with this program i have to do a webclient in java i will put here the instructions that were given to me and then the work i have been doing so you can have an idea of what i'm doing any help you give me i will be very thankful thanks. H