HRMD_A IDocs in Error Status 02

Dear SAP Peeps,
Upon generation of outbound HRMD_A idocs, an error occurs. Error status is "02 - Could not find code page for receiving system".
Can you guys assist me here? What does code page mean? How the error will be solve? The error occurs in every two weeks upon sending the idocs. Sending system is a unicode system while the receiving system is a non-unicode system.
Thanks!

i Think u have run some personnel acitons
than u need to check the table T529A and check have u assigned the feature which standrad in sap for certain acions
for Ex MSN20 MSN10 check these thr PE03
in IMg
check SEt up personnel Acitons

Similar Messages

Idocs with error status

Hi Everyone,
How to find all idocs with error status for a given date range?

Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik

HRMD_A IDoc in error not raising an event

I have workflows enabled for IDocs in error.
If an inbound order IDoc (ORDERS) arrives in status 51, it triggers a workflow.
If an HR master data IDoc (message type HRMD_A) arrives in status 51, no workflow is triggered.
Here is what I have checked:
Partner profile has me as responsible agent in both cases.
Both type linkages are active for IDOCHRMD and IDOCORDERS event InputErrorOccurred.
Both IDocs types are posted in with the test tool and end up in status 51.
When I investigate the event trace, I can see that an event is raised for the ORDERS IDoc but not for the HRMD_A IDoc.
There are no errors in the type linkage status column.
So why would it be that the event is not being raised for the HRMD_A IDoc?
How can I find out what should be raising the event? I guess that there is a function module call to SWE_EVENT_CREATE or SAP_WAPI_CREATE_EVENT.
Kind Regards,
Tony.

Hi Tony,
I am a complete novice to workflow but I have a requirement liek yours to trigger workflow for idocs in error, so I was hoping you could point me in the direction of some documentation/steps on how to do this?

No authorization for changing Customer Centrally- Idoc in Error Status 51

Hi Experts,
We are implementing MDM for one of the client.
The client runs a modification scenario in MDM for Customer Master.
He modifies a customer record in MDM and this record is transfered from MDM to ECC via PI through Idocs.
We are using standard Idocs for Customer Master which is DEBMDM
There are 2 Idoc's generated in ECC by PI from DEBMDM as DEBMAS and ADRMAS.
ADRMAS Idoc is succesfull in ECC and the corresponding record is modified.
Now the issue is that the corresponding DEBMAS Idoc goes into Error 51.
The Error details is as below:
                                                                                No authorization for changing vendor Centrally
Message no. F2326
System Response
You cannot access the requested data.
Procedure for System Administration
If necessary, include an entry in the user's authorization profile for
    the authorization object and parameters specified below.
Authorization object:
o   F_KNA1_APP
Parameters:
o   Activity: 02
    o   Application authorization : *
We gave the respective authorization object to the RFC User ID used in PI RFC created to connect to ECC.
Also we have given the user id Tcode authorization like XD01/02/03.
But this error still persists.
Request to throw some light on this.
Cheers
Dhwani

Check these threads
[Re: IDOC STATUS - 51 " IDOC HAS TEST STATUS|IDOC STATUS - 51 " IDOC HAS TEST STATUS";
[Error Inbound IDoc - Status 51|Error Inbound IDoc - Status 51;
thanks
G. Lakshmipathi

Idoc inbound error status code 56

Hi,
   when i am sending custom idoc from source system to destination , idoc sent successfully from source system .But in the receiver system idoc status code is 56 ( idoc with errors added) .
partner profile also available in the receiver system. How to solve the error.can any one pls give me the solution.
                                                                                Regards,
                                                                                Suhash.

Hi,
Check this link..[IDOC Status code 56 !!   |IDOC Status code 56 !!]
[Re: Status 56 - IDOC with errors added   |Status 56 - IDOC with errors added]
Edited by: Avinash Kodarapu on Mar 19, 2009 4:55 PM

IDOC: Update ERROR status

Hi Experts !!!!!!
I am creating outbound IDOC for Informatica as middleware.
Once transaction is saved in SAP, customized workflow will start on a trigger event and create IDOC using MASTER_IDOC_DISTRIBUTE. Before calling MASTER_IDOC_DISTRIBUTE i am doing few mandatory field validations.
My requirement is to generated IDOC, even validation fails and set status to '26'. I also need to set customized message in error status mentioning why IDOC failed.
Can anyone suggest how to achieve this.
Regards,
Rushikesh

Hi,
Did you configure partner profile with appropriate information?
Thanks,
Ganga

IDOC INBOUND ERROR ( STATUS - 51 )

hi all,
when procssing the inbound idoc's i am getting an error ststing that " No status record was passed to ALE by the application " what may be the problem .
helpfull answers will be rewarded with points.
regards,
murali.

See the code in this function module IDOC_INPUT_CLOSE. I think, even though you are writing the status records to the database, you need to send a status back to XI(ALE) with your status record. That is why I think you are getting this message.
In WE02, what do you see as status records for 1)original IDOC and 2) your new IDOCs?
Are you getting this message after you create the new IDOCs or before you split them? Can you tell us what is the logic of your function module(just design logic not the code)?
Regards,
Srinivas

Inbound idoc with error status 52 messege type hrmd_a07

i have an inbound idoc with status 52
error messege : Object 01 ,P ,00056786 does not exist: infotype 0302 cannot be created
Object 01 ,P ,00056786 does not exist: infotype 0006 cannot be created
i debugged but i haven't find out the reason
am updating 0000,0001,0002,0003,0006 infotypes

Hi rahul,
Need to check the address filed (0006) for BP mapped to postion (00056786)
Infotype 0302 (Additional Actions) :
Infotype 0302 is not maintained directly and is automatically updated by Infotype 0000 .
The additional actions Infotype (0302) is of time constraint 3 (gaps and overlaps).
Specifically in some cases if we want to have a non status-changing Action on the same day where already a personnel action is existing at that time we can activate the Infotype 302 by executing Report RPUEVSUP.
please check and let me know . I think it will be helpfull
Thanks and Regards,
Krishna

Fill Idoc error status

Hi Folks,
I am trying to fill the IDoc error status when processing inbound ORDERS IDoc.
Code looks OK.
But i am not getting the IDoc in error status.
Pl look @ the code and let me know.
data: w_errtab like errtab occurs 0 with header line.
if condition fails.
move derrtab to w_errtab.
w_ERRTAB-ARBGB = 'IDOC_ADAPTER'.
w_ERRTAB-CLASS = 'E'.
w_ERRTAB-MSGNR = '902'.
w_ERRTAB-MSGV1 = xvbak-bstdk.
w_ERRTAB-MSGV2 = s_kunnr.
w_ERRTAB-MSGV3 = s_vbeln.
append w_ERRTAB.
DESCRIBE TABLE w_errtab LINES sy-tfill.
derrtab = w_errtab.
endif.
The IDoc status is still 53.
Thanks,
Matt

call customer-function '011'
         exporting
              dxvbak = xvbak
              docnum = idoc_contrl-docnum
         tables
              derrtab = errtab
              dxvbap = xvbap
              dxvbep = xvbep
              dxvbadr = xvbadr
              dxvbpa = xvbpa
              dxvbuv = xvbuv
              dedidc = idoc_contrl
              dedidd = idoc_data
              dxkomv = xkomv
              dxvekp = xvekp
              dyvekp = yvekp.
    describe table errtab lines anzahl.
    if anzahl gt 0 and input_method = 'X'.
      export errtab to memory id 'idoc_test_errtab'.
    endif.
    if anzahl gt 0 and
       xaprau eq 'D'.
      loop at errtab where arbgb eq 'VG' and
                           msgnr eq '219'.
        anzahl = anzahl - 1.
      endloop.
      if anzahl eq 0.
        refresh errtab.
      endif.
    endif.
    if anzahl ne 0
     and input_method is initial.
      perform determine_user.
      perform statusrecord tables errtab.   " This is place in which IDOC_STATUS table get filled from
                                            " ERRTAB. Please check whether your IDOC_STATUS have
                                            " the Error record 51 that you inserted
      call customer-function '010'
           exporting
                docnum      = idoc_contrl-docnum
           tables
                derrtab     = errtab
                xbdidocstat = idoc_status.
    else.
a®

CRMXIF_PARTNER_SAVE: Error status 'A ' calling validation service

I am getting error message while posting BP IDOC
CRMXIF_PARTNER_SAVE: Error status 'A ' calling validation service
Regards
Meghana

Hi Meghana
could u advise how you solved it.
regards
ranjeet

Custom status message in ALE HRMD_A IDOC

Hi,
We are using HRMD_A idoc for integrating two SAP systems. We want a custom check to be included in the ALE outbound processing, where for example if a field of an infotype is some value then we want to stop the IDOC from being transferred to the target SAP system. IDOC should stop with a custom error message in the status record. Is this possible using any of the user exits?
Thanks in advance,
Shravan

Requirement looks bit strange to me, if at all the IDoc is not needed to be sent for error message then why to Generate them, just filter out creation of IDocs by setting the Filters in Distribution model.
For your requirements you may want to take a look at Badi HRALE00OUTBOUND_IDOC.
Regards
Shital

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

HRMD_A Idocs sent to XI has status 39

Hi,
Our HRMD_A idocs used to have status 03, but after we started using XI , most of them have status 39 and they are being processed correctly. But some other programs are checking for status 03.
How does this Idoc status gets changed or effected after using XI?
Any ideas on that?
Thanks in advance.

Hi Anjana
We are trying to integrate HR master data with a legacy system and we are using chnage pointers for that. Did your scenario use change pointers to trigger HRMD Idocs ? if so I would appriciate ur help. I did all steps for setting up change pointers , but can't get the change points trigered when some thing is changed.

Status 56 - IDOC with errors added

Hi everyone,
        I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "<b>EDI: Partner Profile not available</b>".
        but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
               The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

InfoPackage loading giving IDOC Error: Status 51

Hello Experts,
1) I created a DB view (ZZVIEW05) in the SD area on R3
   and it extracts data OK in RSA3.
2) I replicated the DataSource in BW, Created InfoSOurce
   activated and created an InfoPackage.
3) Scheduling the InfoPackage is failing with an Error:
      Transfer(IDocs and TRFC):Errors Occurred
         Request IDOc: APplication document not posted
For the Error, I right Clicked and looked at the IDoc status in the Source System (R3 where we are getting the data from).
The Idoc with Error has a status of 51 and has the following message:
Any suggestions ?
Thanks, BB
Function module not allowed: ABI_IDOC_DISPATCH
Message no. B1252
Diagnosis
     The function module ABI_IDOC_DISPATCH and the
     application object type which were determined
     are not valid for this IDoc.
Procedure
     1. Please check that the process code in the
         inbound partner profile is correct.
     2. If this is the case, you should check the ALE
         inbound methods ALE inbound methods for the
         process code and see whether the specified
         function module and application object type are
         correct.
     3. If this is also the case, then the function
         module and the application object type are not
         permitted for the logical message type, message
         variant, message function and basis type that
         are contained in the IDoc control record. You
         should check whether the correct values have
         been assigned to these fields in the control
         record. If they do have the correct values,
         then the assignment to the function module and
         the application object type needs to be
         maintained.

Hi Dinesh & Sat,
I tried following:
Using WE19.....I was able to manually pump the IDOC that got stuck in ALE inbox on R3 side...then R3 was able service the request and send data to BW.
It seems the correct function module (R3 side) to process an incoming BW data request is RSAP_IDOC_DISPATCHER.
Instead ABI_IDOC_DISPATCHER is being invoked, by default, which is giving the problem (seems to be some kind of authorization issue!).
In WE20, I changed the partner profile to process using RSAP_IDOC_DISPATCHER. BUT somehow it is not being invoked.
I suppose some other setup (table entry) is conflicting with my setup ....
Any clues ?
Thanks, BB

HRMD_A IDocs in Error Status 02

Similar Messages

Maybe you are looking for