HRMS Button not appearing in Work Center

Hi friend,
As we have HR module here, we have a requirement of maintaining the Personal number and work center link.
But in the Transaction code IR01,02,03 HRMS button is not appearing.
Whether any setting missing especially from HR side anything missing?
Pls guide me on this.
Regards,
krishna

Hi
check the config in OIZU transaction, make sure that screen sequence for HR assignment is maintained
Mneu path:
PM>>Maintenance Plans, Work Centers, Task Lists and PRTs>Work Centers>Configure Screen Sequence for Work Center
Regards
Seenu

Similar Messages

Buttons not appearing clearly upon output

I have created menu buttons (with highlight) that in turn link to the relevant movie file.
When outputted to DVD these buttons appear blurry and unclear.
Why are the buttons not appearing in a crisp, clean state when I have outputted them?

Which version of DVD SP are you using? Are you
making these over video menus? What size and color
of fonts/background? They can all play into what is
happening, usually 20pt + sans serif works best, but
the text in DVD SP can often leave things to be
desired from time to time - where are you previewing
the buttons?
Thanks for your reply.
The vesrion Im using is DV Studio Pro 3. The up state color of the buttons are black and over is red. The font size is 13pt Arial Black.
I have outputted the DVD itself, so I view it through TV.
Am I on the right track?
Thanks again.

Lync does not appear in notification center

I have the latest version of Lync installed (4.2.6609.0000). When installing the app (I have tried deleting and reinstalling several times) the app does not ask me if I wish to receive push notifications. Therefore I assume this is the reason it does not appear in notification center and therefore unless actually in the app I do not see chats if in screen lock or another app etc.
On the previous version of Lync I had the same problem. However, I found that if I loaded Lync, powered off, powered back on again and reloaded Lync I could get it to appear in Notification Center and it worked in the background/screenlock etc.
Is there a way to force it into Notification Center so it will work in the background? When deleting I use app center via 3G so do not connect to a PC etc.
Any ideas or help here. Great tool, but a little useless if it cannot notify me of conversations from other users.

With the previous version of Lync if you loaded Lync, powered off, back on, loaded Lync it would appear in notification centre. But this doesn't seem to work now.
However, as I mention other colleagues with the same phone, IOS version etc do work.

Events "full day" does not appear in Notification Center

hello,
Events " full day " does not appear in Notification Center on my iPhone 6 If I add an event at a specific time today , this event is displayed. Otherwise , the part calendar ( on today's page ) show " no events " even if there is one or more events " full day " .
iOS bug or wrong setting on my part ?

With the previous version of Lync if you loaded Lync, powered off, back on, loaded Lync it would appear in notification centre. But this doesn't seem to work now.
However, as I mention other colleagues with the same phone, IOS version etc do work.

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

exception-type in web.xml does not appear to work

WLS 60 SP1 (#101616)
          <exception-type> in web.xml does not appear to work. WLS shows standard
          "Internal error 500" page instead of a custom error page. The custom error
          page is shown if <error-code> is used instead of <exception-type>.
          Any ideas? Thanks


Can you show me some of your code? This works for me.
Also, you say that you are working with 6.0sp3. Are you sure? sp3 hasn't been
released yet, except in a very limited beta. (I believe only internally, but I
could be wrong about that.)
David
[email protected] wrote:
Hi all,
I have created a very simple servlet and an index.html file with a link
to it, then packaged it into a WAR file with the appropriate web.xml and
ias-web.xml files. I then created an application.xml file referencing
only this servlet and adding a context root. After deployment via
"iasdeploy deployapp simple.ear" and cycling the web server, I can reach
the welcome file (index.html) correctly
-"http://localhost/NASApp/simple". When I attempt to follow the link to
the servlet ("simple servlet") the URL ends
up as "http://localhost/NASApp/SimpleServlet" whereas it should be
http://localhost/NASApp/simple/SimpleServlet If I type that url in, the
servlet executes fine.
I've deployed this into Tomcat and get the behavior I expect. It appears
that the element in the application.xml file is ignored by
iAS.
I'm using iAS SP3 on Win2k (same problem on NT).
This is such a basic behavior that I can't believe this is an existing
bug. I must be doing something wrong...
Any ideas?
Thanks in advance,
-Glen
Files are attached.
Name: simple.ear
simple.ear Type: application/x-unknown-content-type-ear_auto_file
Encoding: base64
Description: filename="simple.ear"

GetColumnAt(index) does not appear to work

I am attempting to place a simple Icon in a dataGrid using
cellRenderer. My problem is that
'myDataGrid.getColumnAt(index).cellRenderer' does not appear
to work. Most of the forum examples create arrays with AS and don't
show this example. I already use XMLConnector (which works fine)
the problem is referencing a column after the fact. I can do this
when creating column smanually but not using getColumnAt(index).
My code block:
import mx.controls.gridclasses.DataGridColumn;
import mx.controls.gridclasses.DataGridRow;
import mx.core.UIComponent;
playlist_dg.cellRenderer = "IconCellRenderer";
playlist_dg.getColumnAt[3].cellRenderer = "IconCellRenderer"
Any help is appreciated. cellrenderer is a bit hairy
Mitch

this is either a blindingly stupid question (for which I
apologise) or a legit bug. Either response would put my mind at
rest.
Thanks
Hillcreative

Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

Hi guys,
I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
lets start from the low level troubleshooting done:
- plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
- booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
what I've ruled out:
-HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
-BIOS has zero options for graphics card options.
Any ideas before i RMA this laptop? I'm at a loss.

OP's problem has been solved. Also please don't resurrect and do not hijack other people's topics. Open your own one.
>>Please read and comply with the Forum Rules.<<
Topic Locked

Hashmap containsKey() method does not appear to work

Hashmap containsKey() method does not appear to work
I have an amazingly simple custom class called CalculationKey, with my own amazingly simple custom equals() method. For some reason when I call my containsKey() method on my HashMap it does not use my defined equals method in my defined key class. Do hashmaps have their own tricky way for establishing whether two keys are equal or not?
THIS IS MY AMAZINGLY SIMPLE CUSTOM KEY CLASS
private class CalculationKey
private LongIdentifier repID;
private LongIdentifier calcID;
public CalculationKey(LongIdentifier repID, LongIdentifier calcID)
this.repID = repID;
this.calcID = calcID;
public boolean equals(Object o)
CalculationKey key = (CalculationKey)o;
if (key.getCalcID().equals(calcID) &&
key.getRepID().equals(repID))
return true;
else
return false;
public LongIdentifier getCalcID()
return calcID;
public LongIdentifier getRepID()
return repID;
THIS IS MY AMAZINGLY SIMPLE CALLS TO MY HASHMAP WHICH ADDS, CHECKS, AND GETS FROM THE HASHMAP.
private Hashmap calculationResults = new Hashmap();
public boolean containsCalculationResult(LongIdentifier repID, LongIdentifier calcID)
if (calculationResults.containsKey(new CalculationKey(repID, calcID)))
return true;
else
return false;
public Double getCalculationResult(LongIdentifier repID, LongIdentifier calcID)
return (Double)calculationResults.get(new CalculationKey(repID, calcID));
public void addCalculationResult(LongIdentifier repID, LongIdentifier calcID, Double value)
calculationResults.put(new CalculationKey(repID, calcID), value);
}....cheers

You can make a trivial implementation to return a
constant (not recommended)What do you mean by that? Hmm.. I guess you mean that
you shouldn't use the same constant for all objects?
But don't see the int value of an (immutable) Integer
as constant?
/Kaj
You can write hashCode to just always return, say, 42. It will be correct because all objects that are equal will have equal hashcodes. Objects that are not equal will also have equal hashcodes, but that's legal--it just causes a performance hit.
The value is that it's really really simple to implement: public int hashCode() {
return 42;
} So you can use it temporarily while you're concentrating on learning other stuff, or during debugging as a way to confirm that the hashCode is not the problem. (Returning a constant from hashcode(), rather than computing a value, is always legal and correct, so if something's behaving wrong, and you replace your hashCode method with the one above, and it still breaks, you know hashCode isn't the problem.)
The downside is that you're defeating the purpose of hashing, and any non-trival sized map or set is going to have lousy performance.
For a decent hashCode recipe, look here:
http://developer.java.sun.com/developer/Books/effectivejava/Chapter3.pdf

Crystal 8.5 (Minimum function in the function tree does not appear to work)

HI I would greatly appreciate some help with this problem I am having.
I am creating a report in which there is a group of records printed . Within each record there could be any number of results related to that record of which I want to extract both the maximium and minimum value and print these. This bit is fine as I do this using the maximum and minimum function available within the summary function.
However with each of these max and min values calculated and printed I then want to create a footer that adds all these max and min values up. (This is not immediately possible using the 'summary function' max and min values as they are not presented on the 'Field explorer' dialog box for selection.
However I can individually using the maximum 'tree function' get the report to store these values so that I can do the calculations once I have got to the footer (as the fields defined are accessible through the field explorer. But the same minimum function does not appear to extract a result (and no I do not have zeros in the data).
Is there a known problem with the minimum function?
Is there another way of getting this data?
Thank you in advance
seyviv

Hi Debi, it would be easier for mean to demonstrate what I wnat/am doing in the report by use of data.
I have a file with a list of sample results. There may be many results for one sample. ie
Sample      Result Number      Result
98-01          1                           3
98-01          2                           5
98-01          3                           6
98-02          1                           3
98-02          2                           7
98-02          3                           9
98-03          1                           4
98-03          2                           5
98-03          3                           11
On the first page I want to see the max and min values across all samples listed for each result number. Then as a total value (once all the result numbers max and mins are displayed I want to perform a calculation on the max and min values displayed in the list (ie. max 4 + 7 -11 and for min 3 + 5 - 6)
                      Result
                      Number        Max           MIn
                      1                    4                3
                      2                    7                5
                      3                    11              6
Result of                             0                2
Calculation
I have been able to do this for the max values but the minimum function does not work.
How I currently extract this data is that I use a 'Summary field ' to calculate the max and min values in the list. However to get the data for the calculation at the bottom I use the 'Formula fields' to extract the values listed for all the results for 'result number 1, 2 & 3' and then use the 'Function tree' to get the 'Maximum value for each individual result number and then finally do a calculation on the max values. However, the same minimum function does not appear to work.
I hope this explains what my problem is.
Thank you in advance of any suggestions you may have
Regards
Viv

Quantity is not appearing on Cost Center report S_ALR_87013611

Hi Fellows,
Quantity is not appearing on cost center report S_ALR_87013611. When we go to the line items it is appearing. Could you please help me in this regard.

Hi,
Please refer note 64120
regards
Waman

'Find' function does not appear to work in TextEdit on .txt documents

Most of the time the 'Find' function on the TextEdit application does not appear to work on .txt documents. I have verified this by using Find on words that I know are in a document, and it cannot find them. I've tried different options on the 'Find' function without success. This appears to have started with version 10.6.8. Has anyone else had this problem since upgrading to 10.6.8?

Thanks -- but I swear it worked fine prior to either the 10.6.7 or 10.6.8 updates and now it doesn't. I'll just keep experimenting and playing around with it and see if I can get it to work. Maybe the new Lion O.S. coming out will fix it, although I'm not going to rush -- I made the mistake of putting Snow Leopard on right after it came out and had problems with some programs not working properly anymore (like Pro Tools, for example). Always a good idea to hold off until most of the bugs get fixed.

SATA 3 and 4 do not appear to work

Hi,
I just purchased a new WD 320GB HDD to accompany my other 2 WD HDD but for some reason SATA slots 3 and 4 do not appear to work or there must be some way you have to enable them. It is definitely not the new HDD as it works in the other two SATA slots. Any help would be appreciated in getting this new HDD installed.
Regards

Okay reading the manual is a good thing I have discovered. It was 2 and 4 that werent working but it was because of a BIOS setting. I have now changed integrated peripherals to SATA only and all 3 HDD now work fine. My problem now is that the 2 CD/DVD drives that I have are now invisible. Does SATA only turn off the IDE function altogether? Any solution greatly appreciated.
Regards

ADF Buttons not appearing correctly

I've tried researching this problem and from what I've found it has said if we are using JDK version 1.4 and headless = true then we shouldn't have this problem. When running our application some of our ADF buttons will appear correctly and others will not.
When I look in our
application-deployments/../temp/adf/images/cache/en/
directory I can see the images of the buttons that appear correctly, but if I navigate to another page with different buttons I would then expect to see those images being creating in that folder but there are not. If anyone has any insight on this problem it would be a big help. Thanks.

Nothing leaps to mind that affected downloadable fonts in Firefox 34... but there are hundreds of changes in each version so I can't rule it out.
Just to go back to basics for a moment...
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

Radio Buttons Not Appearing in Quiz

I created a quiz in Captivate 5.5 then upgraded to Captivate 6. When I run the quiz locally, the radio buttons appear next to the possible answers and everything works fine. When I run the quiz in our LMS, the radio buttons do not appear. Anyone else having this issue or have any insight?

Hi Anjaneai,
For some clarification, we are loading the Captivate 6 quiz swf into another swf. When we play the quiz swf alone, the radio buttons appear. However when we play the quiz swf within the other swf, the radio buttons disappear. To reiternate, we loaded Captivate 5.5 quiz swfs into another swf and the buttons appeared. Do you what the difference between the Captivate versions could be or have any insight?
We've already looked into some of your suggestions (the Flash player is not the issue) and am looking into your other suggestions.
Below is the screen shot you requested.
Thanks again for your assistance.

HRMS Button not appearing in Work Center

Similar Messages

Maybe you are looking for