HRSM_D : Error in Upload of time data

Hi all,
We are trying to post data in Infotype 2001 via
HRSM_D01 Idoc . But we are getting the following error
"data record could not be added to table PTEXDIR"
We also executed the report RPTEXTPT .
Please guide.
Shikha

Hi,
In the BW server you can try one of the report program to delete the entire requests in infocube or ods.
Report program is RSDELPART1
Just run this report program in se38.
In the selection screen of the program,give the name of the data target from where you need to delete all the existing requests.
This technique was once used.
Please let me know whether it works.

Similar Messages

To upload the time data from a remote server into R/3 2011 infotype

hi all,
i have been given a task to upload the time data of the employees into the 2011 infotype from a remote time recording server, can this problem be solved with the help of a rfc which will run on that remote server, please guide me how to approach this problem.
thanks & regards,
santosh.

Hi Santosh,
You can use ALE for this. The message type is HRSM_D for upload of time data.
Reward if useful.
Regards,
Senthil

Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

Getting error while uploading gl master data using LSMW batch input data

Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik

Error while uploading HR master data from inQuality server

Hi, Expert. While uploading of MAster data from Developement to Quality by BDC. When program starts for Tcode PA40, selecting Hiring Action, it is goining to the Action Screen. Here while taking the position from HR template, it gives error as Position is not in Table T428B. Payroll area on the date (Date of original hiring, of the person) it is taking DM as defalt in place of our created Area and terminating. When i am trying entering the data manually, it is giving same error for Position. I am not able to upload the data. Kindly help me by suggesting me the correct sequence and steps for uploading the data. Correct answer will be provided with STARSSSSSS **. Regds Punit.

Have all your configurations been transported to Quality?
Have you created the positions before initiating BDC for Hiring?
Check Feature ABKRS in Quality. Is this same as in Development?
Is your BDC running OK in Development?
Regards,

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error in uploading TEXT master data

I got the following error while Creating Infopackage for uploading TEXT Master data:
Error 8 when compiling the upload program:row 431, message: A newer version of data type
/BIC/B0000102000 was
Can anyone let me know how to solve this issue?
Thanks,
Soujanya.

Hi Soujanya,
Check whether the row 431 is having proper data that i matching in Data type with the IO.
Also activate the transfer rule/ Transformations if any. Then try loading the data.
If you are trying to load the Data through the Flat File, close the *.CSV file before actually loading the data & dont open it till it is successfully loaded.
Hope it helps!
Regards,
Pavan

How can we upload the Time data into SAP system

Dear all,
ingeneral which method we can use to read the Time data and how can we upload that data into SAP system. Please any one can answer this asap.

In the recent project that I have done.. the time data is uploaded from the external time recording machine.. in the form a file...
The other way is through CATS... which in turn will populate the time entries as per hte work schedules... and will explicitly have to populate the deviations to the work scheudle by going through transactions..
Please reward the points if it is helpful...
Regards,
Suvan,
Yash Technologies Pvt Ltd, Hyderabad.
Message was edited by:
Suvan

Error While Uploading the Vendors Data

Hi Friends,
iam uploading the vendors information. In the XL-Sheet there are 5 Records are there.the first two records are correct.but iam getting the following message for the frist two records.iam using the call transaction method.
No memory is available for the CUA interface
what is the error i am not able to get it.
some times if i upload the same record with same report, i will get the following message that,
vendor 1235 has created for the company code 1000
why it so?

Hi,
1) No memory is available for the CUA interface
Check With basis team
2) vendor 1235 has created for the company code 1000
Means vendor 1235 is creatred for this company.
Regards
Md.MaahboobKhan

Error in uploading excel sheet data into internal table

Dear all,
i am facing problem when uploading data from excel. i used KD_GET_FILENAME_ON_F4.i select the file and pass on to ALSM_EXCEL_INTO_INTERNAL_TABLE.and i get the ERROR....
Illegal type when transferring an internal table to a FORM. this is my code .
types : begin of ty_mm01,
        matnr like rmmg1-matnr,
        mbrsh like rmmg1-mbrsh,
        mtart like rmmg1-mtart,
        maktx like makt-maktx,
        meins like mara-meins,
        matkl like mara-matkl,
        bismt like mara-bismt,
        spart like mara-spart,
        mtpos like mara-mtpos_mara,
        end of ty_mm01.
data : tt_mm01 type standard table of ty_mm01,
        wa_mm01 like TT_MM01.
data : t_bdcdata like standard table of bdcdata,
       t_bdcmsgcoll like standard table of bdcmsgcoll.
constants: begcol TYPE i value 1 ,
            begrow TYPE i value 1,
            endcol TYPE i value 100,
            endrow TYPE i value 32000.
selection-screen : begin of block bdc with frame.
parameter : tfile like rlgrap-filename obligatory.
selection-screen : end of block bdc.
at selection-screen on value-request for tfile.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
   PROGRAM_NAME        = 'ZMM_MAT_MAS_BASIC_DATA'
   DYNPRO_NUMBER       = '1000'
   FIELD_NAME          = 'TFILE'
   STATIC              = 'X'
MASK                = ',*.xls,'
CHANGING
    FILE_NAME           = tfile
start-of-selection.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                      = tfile
    I_BEGIN_COL                   = begcol
    I_BEGIN_ROW                   = begrow
    I_END_COL                     = endcol
    I_END_ROW                     = endrow
TABLES
    INTERN                        = tt_mm01
EXCEPTIONS
INCONSISTENT_PARAMETERS       = 1
UPLOAD_OLE                    = 2
OTHERS                        = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks in advance

Hi,
Check these FM : KCD_EXCEL_OLE_TO_INT_CONVERT
Report ZPSP_TEST.
data: bdc_DATA like bdcdata occurs 0 with header line,
mess_tab like bdcmsgcoll occurs 0 with header line.
DATA: BEGIN OF ITAB OCCURS 0 ,
tcnt TYPE i, "Table Counter &H0D
WERKS LIKE T001W-WERKS,
BNFPO LIKE EBAN-BNFPO,
MATNR LIKE MARA-MATNR,
MENGE LIKE EBAN-MENGE,
END OF ITAB.
start-of-selection.
PERFORM upload_data.
loop at itab.
perform bdc_dynpro using 'SAPMM06B' '0100'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-BSART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'EBAN-BSART'
'NB'.
perform bdc_field using 'RM06B-LPEIN'
'T'.
perform bdc_field using 'EBAN-WERKS'
ITAB-WERKS.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RM06B-EKGRP'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RM06B-BNFPO'
ITAB-BNFPO.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE(01)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'EBAN-MATNR(01)'
ITAB-MATNR.
perform bdc_field using 'EBAN-MENGE(01)'
ITAB-MENGE.
perform bdc_dynpro using 'SAPMM06B' '0102'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*perform bdc_field using 'RM06B-EEIND'
record-EEIND_010.
*perform bdc_field using 'RM06B-LPEIN'
record-LPEIN_011.
*perform bdc_field using 'EBAN-EKGRP'
record-EKGRP_012.
*perform bdc_field using 'EBAN-BADAT'
record-BADAT_013.
*perform bdc_field using 'EBAN-FRGDT'
record-FRGDT_014.
*perform bdc_field using 'EBAN-PREIS'
record-PREIS_015.
*perform bdc_field using 'EBAN-WAERS'
record-WAERS_016.
*perform bdc_field using 'EBAN-PEINH'
record-PEINH_017.
*perform bdc_field using 'EBAN-REPOS'
record-REPOS_018.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE(02)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*perform bdc_field using 'RM06B-BNFPO'
record-BNFPO_019.
*perform bdc_field using 'EBAN-MATNR(02)'
record-MATNR_02_020.
*perform bdc_field using 'EBAN-MENGE(02)'
record-MENGE_02_021.
perform bdc_dynpro using 'SAPMM06B' '0102'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*perform bdc_field using 'EBAN-MENGE'
ITAB-MENGE_023.
*perform bdc_field using 'RM06B-EEIND'
record-EEIND_024.
*perform bdc_field using 'RM06B-LPEIN'
record-LPEIN_025.
*perform bdc_field using 'EBAN-EKGRP'
record-EKGRP_026.
*perform bdc_field using 'EBAN-BADAT'
record-BADAT_027.
*perform bdc_field using 'EBAN-FRGDT'
record-FRGDT_028.
*perform bdc_field using 'EBAN-PREIS'
record-PREIS_029.
*perform bdc_field using 'EBAN-WAERS'
record-WAERS_030.
*perform bdc_field using 'EBAN-PEINH'
record-PEINH_031.
*perform bdc_field using 'EBAN-REPOS'
record-REPOS_032.
perform bdc_field using 'EBAN-TXZ01'
'BEARING 2"X2"'.
perform bdc_field using 'EBAN-MENGE'
'65'.
perform bdc_field using 'RM06B-EEIND'
'2005/01/03'.
perform bdc_field using 'RM06B-LPEIN'
'D'.
perform bdc_field using 'EBAN-EKGRP'
'M11'.
perform bdc_field using 'EBAN-BADAT'
'2005/01/03'.
perform bdc_field using 'EBAN-FRGDT'
'2005/01/03'.
perform bdc_field using 'EBAN-PREIS'
' 1,120.00'.
perform bdc_field using 'EBAN-WAERS'
'EUR'.
perform bdc_field using 'EBAN-PEINH'
'1'.
perform bdc_field using 'EBAN-REPOS'
'X'.
perform bdc_dynpro using 'SAPMM06B' '0102'.
perform bdc_field using 'BDC_CURSOR'
'EBAN-MENGE'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'EBAN-TXZ01'
'DRILLING PIPE 10"'.
perform bdc_field using 'EBAN-MENGE'
'75'.
perform bdc_field using 'RM06B-EEIND'
'2005/01/03'.
perform bdc_field using 'RM06B-LPEIN'
'D'.
perform bdc_field using 'EBAN-EKGRP'
'M11'.
perform bdc_field using 'EBAN-BADAT'
'2005/01/03'.
perform bdc_field using 'EBAN-FRGDT'
'2005/01/03'.
perform bdc_field using 'EBAN-PREIS'
' 0.53'.
perform bdc_field using 'EBAN-WAERS'
'EUR'.
perform bdc_field using 'EBAN-PEINH'
'1'.
perform bdc_field using 'EBAN-REPOS'
'X'.
perform bdc_dynpro using 'SAPMM06B' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RM06B-BNFPO'
perform bdc_field using 'BDC_OKCODE'
'&H3DBU'.
*perform bdc_field using 'RM06B-BNFPO'
CALL TRANSACTION 'ME51' USING BDC_DATA MODE 'A'.
endLOOP.
FORM upload_data.
*local variable declaration
DATA : lv_index TYPE i,
l_count TYPE i.
*local constants declaration
CONSTANTS:
lc_start_col TYPE i VALUE '1' ,
lc_start_row TYPE i VALUE '2' ,
lc_end_col TYPE i VALUE '256' ,
lc_end_row TYPE i VALUE '65536'.
*local field symbol declaration
FIELD-SYMBOLS : <lf_s>.
*loacal internal table declaration
DATA : li_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
*refresh internal table for each loop
CLEAR: li_intern,
l_count .
REFRESH li_intern.
to upload the data in excel on the presentation server this function
module converts the data from excel file into an internal table
containing row no col no and value
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
EXPORTING
filename &H3D 'Give file location here'
i_begin_col &H3D lc_start_col
i_begin_row &H3D lc_start_row
i_end_col &H3D lc_end_col
i_end_row &H3D lc_end_row
TABLES
intern &H3D li_intern
EXCEPTIONS
inconsistent_parameters &H3D 1
upload_ole &H3D 2.
checking for data in internal table
CHECK NOT li_intern[] IS INITIAL.
sorting internal table
SORT li_intern BY row col.
collecting data into an internal table
LOOP AT li_intern.
MOVE: li_intern-col TO lv_index.
lv_index &H3D lv_index + 1.
ASSIGN COMPONENT lv_index OF STRUCTURE itab TO <lf_s>.
MOVE : li_intern-value TO <lf_s>.
AT END OF row.
l_count &H3D l_count + 1.
itab &H3D l_count.
APPEND itab.
ENDAT. " at end of row
ENDLOOP. " loop at li_intern
Reg,
Siva
Edited by: Siva Prasad on Jun 1, 2009 8:41 AM
Edited by: Siva Prasad on Jun 1, 2009 4:25 PM

We are trying to down load an app and it keeps giving us an error to check our time date information? The iPad info is showing correct? Any ideas?.

We are trying to down load apps and we keep getting an error after we put password in that we need to update date and time ?
I have checked calendar is correct and time on top of screen is correct?

Go to Settings>General>Date and Time>Set Automatically>On. If that is set correctly - try a reset.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Error in Uploading BP Master Data in DTW

Hi there.
I'm now updating our business partner master data using DTW and i encountered an error "No matching records found (ODBC-2028) Application-defined or object-defined error 65171".
Pls help me. Thanks
des'

Hi
Some of the helpful tips :
1- Create the data import file as usual in Excel
2- Save the file as .txt (tab delimited)
3- Select all columns and rows from the Excel file (including the headings)
4- Copy the data into the clipboard
5- Open a new text file in Notepad
6- Paste the data and save the file
7- Import this file with DTW
Also check this notes :
How to import BP addresses and set the default
Note 979116
Hope this helps
Bishal

Time Data Uploading

Dear SAP Gurus...
Is there any other way to upload the time data into the sap system except the BDC program. If yes, please send me the answer in detail..
Best Regards..
Vikash

Hi Vikash
Are you using any sub system.
Pls let me know the time management status on which u r working
Cheers
Vijai

Error when uploading master data

Hello everybody...
I m finding an error when uploading the master data (BW 3.5)from a flat file. error is...
Error 8 when compiling the upload program: row
227, message: The data type
/BIC/CCABZRAK_COUN_ATTR was modified
plz suggest me.....
Thanks & Regards
Rakesh Jangir

Hi,
There might be two reasons..
1. In your flat file you have data in lower case .. if you want upper case data also just make change in IO to allow lower case data also..
2. Close the flat file while loading data...
Regards,
viren..

Uploading Time data to HR Clusters B1 and B2

Hi All,
My agenda is download Time data ( Hr cluster B1 and B2 ) from One SAP System ( 4.7 ) using Macr RP-IMP-C1-B1, RP-IMP-C2-B2 and upload to a ECC 6.0 SAP System using Macro RP-EXP-C1-B1, RP-EXp-C2-B2. Though uploading can be achieved using report RPTIME00( Provided all the infotypes filled ) , i dont want to do this because time schema may change which will cause data inconsistencies between two system.
I succesfully imported B1 Cluster from one system but when i try to upload the same data using macro RP-EXP-C1-B1, i am not getting any error( SY-SUBRC = 0 ) but data is not saved in the database even though i give a commit work.
I filled all the required values. i.e. i filled b1-key with personnel number and i filled PCL1-RELID, PCL1-SRTFD, PCL1-SRTF2
these fields with values and included includes
RPC1B100
RPC2B200
RPPPXD00
RPPPXD10
RPPPXM00
Macro RP-EXP-C1-B1 Code is
DEFINE RP-EXP-C1-B1.
PCL1-VERSN = B1-VERSION-NUMBER.
B1-VERSION-SAPRL =                                         "L6BK003229
               CL_PT_CLUSTER_UTIL=>GET_RELEASE( 'SAP_HR' ). "L6BK003229
B1-VERSION-UNAME = SY-UNAME.
B1-VERSION-DATUM = SY-DATUM.
B1-VERSION-UZEIT = SY-UZEIT.
B1-VERSION-PGMID = SY-REPID.
EXPORT B1-VERSION
       NT1
       NT2
       IFT1
       IFT2
       ERT
       NCT
       QT
       ST
       ITP1
       ITP7
       ITP50
       PDPPM
TO   DATABASE PCL1(B1)
ID B1-KEY USING PCL1_EXP_IMP.
RP-IMP-B1-SUBRC = SY-SUBRC.
END-OF-DEFINITION.
In this macro there is a using parameter PCL1_EXP_IMP which is routine used to handle buffers, i belive my data is not storing in the database table because of this why because if i put this code in a routine and call this routine in my program instead of calling the Macro. In this routine if i comment out "USING PCL1_EXP_IMP then everything i working fine but i dont know whether this routine is handling anyother thing.
Have anybody faced the same issue , how to handle buffers. Have anybody used macro RP-EXP-C1-B1 to upload Cluster B1 data , if so please let me know the steps to do that.
Thanks in advance .
Points will be rewarded for useful answers.

Hi Rajanidhi,
We are facing same issue, can u please post the solution? Any clue would help us a lot in this regard.
Thanks,
Somu

HRSM_D : Error in Upload of time data

Similar Messages

Maybe you are looking for