HS - 1200 Right Earphone Not Work

I just got this new headset and only the left earphone is working?
I am using Xp .
Thanks
Brad

Hmm... I luckly solved this problem. My headset after about 2 months broke down. It won't play or record anything. It charged for ages and never finish. I send it on guaranty back and get new one. Before i had Win XP and buttons won't work. Before i get new headset i update to Win 7. After pluging them in and install CD all works properly. Maybe they are not compatible with XP... >.<

Similar Messages

  • Headphone wh-701 right earphone not working

    i recently bought a new nokia n8. And the headphone which comes with my mobile (wh-701) is working good. But recently the right earphone is stop working ... is their any way to repair it or change with nokia care... my mobile is in under warrenty

    Hi JamalJan,
    Welcome to the Nokia discussions board!
    If your headphone is damaged and you was not the cause of this, you should take it back to the retailer and bring a proof of purchase. They can deal with the issue there because it may be that you have a hardware problem.
    Let us know how you get on with this.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Iphone 4 sudden decrease in audio quality and right earphone not working

    This is really strange --- my iPhone 4 suddenly stopped playing music in the right headphone - in all headphones and even in my car AUX jack. Also, the sound in the left headphone is remarkably muffled and low quality.
    But if I pull the jack out a tiny bit, right before it comes out all the way, sound plays normally through both headphones for a split second.
    I tried the cotton swab and rubbing alcohol, tried compressed air.. any ideas what could be the cause? I'm beginning to think it might be like a connector or something deep in the jack got loose maybe?
    Thanks for the help!

    bump!

  • Earphones not working z1

    i hve sony xperia z1 nd my left ear phones not working i hd checked lots of handfrees but problems still same left earphones not working 
    i m da sony fan plzz help me 
    how to resolve ds problme
    Solved!
    Go to Solution.

    if not then you should contact your local Xperia Care
    http://www.sonymobile.com/global-en/support/contact-us/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • HT1349 MY I PHONE5'S EAR PHONE'S RIGHT SIDE NOT WORKING

    MY IPHONE 5'S EAR PHONE RIGHT SIDE NOT WORKING ND I HAV TRY TO CHANGE MY EAR PHONE AFTER THAT SAME RESULT

    STOP SHOUTING!  It is extremely rude.
    Turn off Mono Audio in Settings > General > Accessibility > Mono Audio.

  • Command-Left/Right Arrow not working

    Very strange behavior I'm seeing today.
    My left/right arrow keys work. Even Option-Left/Right works correctly.
    But, Command-Left-Right do not work. No movement at all.
    Curiously, Shift-Command-Left/Right work fine.
    I've not changed any keyboard shortcuts recently. I've checked the keyboard shortcuts that are currently defined. Nothing that would indicate a problem, but clearly there is.

    Just found a solution that worked for me here. Basically, it seems to be a bug with the Dock. If you type "killall Dock" (the command is case-sensitive) into the command line in Terminal, it restarts the Dock. After that the arrows seem to work normally again.

  • Mouse right button not working

    Hai i am shebeer.. i updated my mac os x 10.4.7 to 10.4.11 after updation my right button not working . please help me to solve this problem...

    So far we're just trying to narrow the problem down, so it looks like it's not likely an OS problem, not impossible but not too awful likely.
    Do you have another Mouse to try?
    Can you try this Mouse on another Computer?
    In System Preferences>Mouse & Keyboard, you might try changing the Primary Button to the Right one to see if the Right Button works as a
    Left button, +but the problem+ with that is that I really don't know what you'd do *if you have no Button at all* then!

  • Air Stream 1200 USB modem not work in yosemite

    my Air Stream 1200 USB modem not work in yosemite but it work in Windows pc.

    May be there is an update available. Contact Air Stream.

  • How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

    How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

    I am also facing the same issues. Sometime i get an option to reject call and sometime i won't .
    Tried all the basic troubleshooting i could from my end but nogo. Also tried complete reset by loosing data still the same results. Any suggestions and fix, Apple ???

  • I have audio trouble,right output not working

    I have an Iphone 4s..
    At first i thought that my headphone jack is not working good,because the left earphone is working and the right one isn't,when i jack it in...
    I tryied many headphones just to make shore that it's not something else,but after many tries i realised that the jack is out..
    and this evening i went to iStyle to try some Audio Docks,and when i put the phone on it it does play music,but only on the left speaker...
    I thought maybe it's the dock,but then i tried three more and it was the same on all of them.. only the left one was working..And now i would like to know please what could be the trouble,and how can i solve it?
    Thank you!
    PS: the problem with the jack was there even before i updated to 7.0....

    Well it sounds like a hardwrae issue to me but you could troubleshoot the software
    Reset the phone first by holding the power button and the home button until it shuts down then turn it back on and try again.
    If it persists then backup your phone to iTunes and set it up as new.
    If it still happens then it is a hardware issue, and you will need service.
    If it does NOT happen when you set up as new, then restore from your backup. if the issue comes back then there is something wrong with your backup and you need to set it up as new again and start from scratch.

  • Ipod video right headphone not working

    i think the prong in my ipod video is out of place, if i hold the jack down and on an angle, it works in both ears but if it moves out of its place, the right headphone wont work. is there a way to fix it by myself? can i move the prong back into place? or do i need to send it in for repairs and if i do will they wipe my hard drive?

    wow. i just came across the same problem just a couple of days ago. My ipod was working fine in the morning and when I got off of work I got no sound out of the right earphone. I bought new headphones cause this has happened before and it was the headphones, but like you said, when pressure was applied to the jack it was only then that I got sound out of both earphones. Ive had my ipod for almost two years now and it is still in really good condition and I dont really know what could have brought this on. Is this a pretty common thing to happen? I had a 3rd generation before this one and had to send it back after a year or so because the battery died, but I did not have this problem with that one and was actually a lot rougher on it. Sorry for the long post. Thanks for the input.

  • Earphones not working properly

    Hey,
    The earphones on my iPod Nano don't seem to be working well anymore. The left one is a lot quieter then the right one.
    Would I get new ones if I go back to the store? Or not? My iPod is still under warranty.
    Thanks.

    I do not work for apple or anything, but if you are under warranty you should be able to get new ones, free. But i would make sure they are in good.

  • One earphone not working in Macbook pro

    For some reason the audio output on my macbook pro is only working on one earphone. It is not the earphones as I have tried other earphones and the same thing happens. I had a problem recently with the output not working at all...and there was a red light coming out of the headphone jack. But the red light ended up going away on its own...and the sound came back. However...there is still only sound coming out of one earphone.

    Hi again.
    Nice website, except the wma files.
    It is the right workflow to monitor what you mix before sending the material to the mastering studio. Although if you use Logic Pro 8 then you have compressor and can make this mastering by yourself (if you want to).
    I try to say it easy: Without Light you can't paint, without suitable equipment you can't monitor an surround-mix. Only stereo is possible with your hardware. You can mix in surround in logic and listen in stereo. This is not optimal but the only chance to do this without buying an audio interface with minimum 6 outputs.

  • Why keyboard and mouse right click not working in Solaris and Linux?

    Hi all,
    I have two problems:
    1) I am working on AWT/Swing application and its working fine in window enviornment,but while running on solaris and linux mouse right-click option window not poping up.
    2) Ctrl+c,Ctrl+v,Home and End keyboard key are not working in solaris and linux OS for same application.
    Pls provide me some solution for these problem.
    -Dinesh

    Hi Nik,
    Thanks for reply. I found some solution for the above problem.
    For mouse right click there was problem in my source code.I have not implemented the mousePressed() method
    In case of keyboard Home, End and arrow key working fine after exporting AWTUSE_TYPE4_PATCH=false; in solaris and linux
    But still Ctrl-c and Ctrl-v not working.
    I am using JDK1.5.0_07+Eclipse IDE 3.1
    -Dinesh

  • Right click not working on BI web report

    Hi,
    We are facing an issue while working with BI 7.0 on Web.
    When we execute a report on the web and right-click anywhere on the characteristics, Menu options-Filter, Change Drilldown, Broadcast & Export etc - are displayed for the first time. After some time when we right click again, the menu options do not appear and even drag and drop does not work.

    Hi Nisha,
    Could you help us with what GUI front end version and patch do u have, What BEx version are u using.
    May be you should upgrade you gui to 7.10 and patch 11 or 12, and also install the corresponding BW and BI addOn.
    Bim, Let us know what your version of BEX and GUI front end is.
    reagards,
    Sree.
    Edited by: Sree Nair on Sep 8, 2009 7:19 AM

Maybe you are looking for