HSA Benefit Plan: Employee Contr and Employer Contr deductions not happenin

Hi Experts,
For a couple of our empls, the Employee Contr and the Employer Contr wagetypes for HSA Benefit Plans are not showing up in the payroll log. For other empls, all is fine.
Here's what the payroll log in running regular payroll looks like in processing of function P0169 for this HSA benefit plan:
=========================================================
BAdI "Evaluate Ee Contrib" implemented
Calculated contributions:
Employee contribution pre-tax: 35.00 USD Weekly
No rollover of pre-tax to post-tax contributions
Post-tax contributions start only after pre-tax limit is reached
BAdI "Check Contribution Limits" implemented
BAdI "Evaluate Er Contrib" implemented
Final result contributions:
Employee contribution pre-tax: 35.00 USD
Employer contribution: 19.24 USD
BAdI "Proration" implemented
Processing proration for 12/27/2010 - 12/27/2010 results in:
========================================================
Here no wagetype is showing up though they are getting calculated above.
Regards,
Somdeb.

The issue has been resolved.
The Savings Plan HSAF had a co-requisite Health Plan HDP and we had to add this co-requisite plan for the empl.
Also the P0169 function had to be changed from BEG to CHK in the payroll schema which did the trick.
Regards,
Somdeb.

Similar Messages

HSA Benefit Plan: Employee Contr and Employer Contr wagetype not showing up

Hi Experts,
For a couple of our empls, the Employee Contr and the Employer Contr wagetypes for HSA Benefit Plans are not showing up in the payroll log. For other empls, all is fine.
Here's what the payroll log lin running regular payroll ooks like in processing of function P0169:
=========================================================
BAdI "Evaluate Ee Contrib" implemented
Calculated contributions:
Employee contribution pre-tax: 35.00 USD Weekly
No rollover of pre-tax to post-tax contributions
Post-tax contributions start only after pre-tax limit is reached
BAdI "Check Contribution Limits" implemented
BAdI "Evaluate Er Contrib" implemented
Final result contributions:
Employee contribution pre-tax: 35.00 USD
Employer contribution: 19.24 USD
BAdI "Proration" implemented
Processing proration for 12/27/2010 - 12/27/2010 results in:
========================================================
Here no wagetype is showing up though they are getting calculated above.
Regards,
Somdeb.

First please respond to my questions.If there is wagetype is coming from the previous periods or other IT where enter for any correction ....there is a possiblity it is nullified after the BADI.
Second..The wagetype is getting dropped in the proration logic...check the dates of employee payperiod with IT169 and let me know the dates.
Third...what is parameter used for P0169 in your UBE2 schema is CHK or BEG or END..?
Edited by: Amosha on Jan 6, 2011 5:11 PM

Employee Contribution and employer match in benefits

Hi All,
I am just trying to figure out where the employee pretax, post tax cost and employer match are calculated in benefits?
In IT0167, i could see plan type and for that plan type i could see the wage type in T5UBA, but i am not getting where it calculates all this.
In PA30, in the technical settings i found out the field, it shows that it gets the field from structure Q0167.
Thanks
Haritha

Go through the Documentation of the Payroll Function P0167. When all the configuration steps in the plan are done and wage types are maintained , this function generates the wage types in RT.
Message was edited by:
Subhash

Missing Benefit Plan in HRBEN0001 in one client but not in another.

Hi All,
I was wondering if anyone has stumbled upon this issue where your benefits configuration are identical in three clients. I have configured two savings plans - 401K and Roth which the employee is allowed to make changes anytime. In two DEV clients, I was able to see both savigns plan in HRBEN0001 and 401K in QA but not the Roth. I've compared the configuration and the dates and they are correct (and identical).
I went back into QA and hired a new test employee and the Roth plan appears in HRBEN0001. My question is: why didn't the Roth plan appeared for the employees that were previously hired. Is there a table that needs to be activated in QA?
Your help is much appreciated! Thanks!

Hi Donna,
Could you please tell how did you resolve this issue as I am facing same problem. I have configured 3 pension plans which are not reflecting under HRBEN0001. Appreciate your help.
Regards,
Purnima

The Benefit Plan in the latest OPA release does not seem to work with Siebe

I've installed the latest version of OPA (10.0.1.14.0) and it came with a Benefit Plan example. The Income Thresholds.xls and Interpretative.dox are missing so it can not be compiled.
Also the OPA Connector Developer Help has a section for this tutorial which explains how to use the Benefit Plan example in Siebel. However I cannot see how by clicking the 'Eligibility' button on HLS Case Form Applet, it is going to call OPA to run the Benefit rules.
Can someone please explain how to get this example working with OPA?
I understand that from Siebel you need to call the 'Policy Automation Assess Workflow' to pass in the relevant data to OPA, but I don't understand how this workflow is being called in the Benefit Plan example? The 'Eligibility' button called a method 'CreateBenefitPlan' which is a user property on 'HLS Case' BC and all it does is a RefreshRecord. So I can't see exactly what is being done behind.

It should be mad clearer in the help but this example is reliant on the Siebel 8.2 public sector version.

US PY HSA Benefit Plan Calc

Friends,
i am looking for suggestions on HSA Plan.
Deduction for this works as FSA with deduction mdoel setup, but SAP recommends to have HSA in IT169 .
For Savings Plan we cannot assign Deduction Model.
Anyone with such experience in past, is there a way we can write a rule to behave has annual amount distributed over remaining periods.

Hello,
Most customer in this scenario are using a user exit.
Try implementing Customer-function 028 (PBEN0028). It is called in function module HR_BEN_CALC_BENEFIT_EE_CONTRIB. This should be an appropriate place where you can calculate the employee contribution.
Hope this help
Sarah

SNP Planned order start and end dates are not calculated correctly

Hello SNP Guru's
The SNP planned orders generated after the Heuristics run, have a start and end date based on the Activity Duration (Fixed), while the resource consumption is based on the Bucket Consumption (Variable), which is correct.
The Activity Duration (Fixed) is based on the BOM Base Quantity. So if the Activity Duration = 1 day, and if the order quantity is more than a day, the start and end dates, still shows as 1 day. So no matter what is the order quantity, the start and end dates is always = 1 day.
Does anyone have any experience in implementing any code to change the start and end dates on SNP Planned Order?
Seems like it should work as standard.
Am i missing something?
Thanks,
Mangesh

Dear Mangesh,
SNP is a infinite planning tool. If you have defined fixed duration to be 1 DAY in the activity, no matter how many quantity you input for your planned order, the order will last for one day. If the resourced is overloaded, you then run capacity levelling to
banlance the capacity. What your expected beahavior happens in PPDS planning.
Claire

Employee Discount and Loyalty Plan

Back in June of this year I contacted customer service to change my plan. I was told about the new Loyalty Plan. My concern was whether or not my employee discount would still apply. The customer service rep checked into it and told me yes. So I made my decision to take the new plan, and commit to a new contract, based on the idea that the plan would be $60 per phone minus the discount which would make each phone $48. This has been the case for months. Even last month, November, Verizon sent me a document to verify I was still eligible for the employee discount. I filled it out and sent it in and got confirmation that I was still qualified. Then the December bill came in and it was $25 higher. When I checked into it I was told that the customer service rep made a mistake and I should have never got the discount. When I checked this forum I found out that a lot of people were told the same thing and made their decision based on still getting their employee discount. This seems like to me that Verizon changed their mind after starting the program and now the consumers are getting a bad deal. This is a breach of contract since I took on the new commitment based on the employee discount still being in effect. My wife and I have been with Verizon for over 13 years. I feel that we have been lied to and that Verizon is refusing to honor their contract with us. They are going to lose our business and we will move our money somewhere else if they don't fix this. They should at least honor what we agreed to until the end of our two year contract. Then they can change the amount legally. This also means that having a contract with Verizon means nothing to them and they have no honor or integrity. So starting today I will start looking for a new carrier because as far as I am concerned my contract with them is null and void the minute they raised my bill and eliminated my employee discount. If they agree to fix the problem, then I will keep their service.

DaleGolds,
We appreciate your loyalty and I’m glad we were able to locate a plan which will help you save. I regret to learn you’ve had this type of experience with a Loyalty plan. We definitely don’t want that to be the case, as these are special plans, especially designed to help our long-time customers. I certainly want to address all your concerns and apologize for the misinformation that may have been provided.
Our goal is to ensure you are billed correctly, and if the plan mentioned is not the best fit for your needs, we are happy to bring you back to the old one. The Loyalty plan you mentioned is designed for single-line users and it is correct the employee discount offered by your company does not apply. It’s always our intention to be honest with you and though this change (discount not applying) is not a breach in contract, it is stated in the agreement the change of eligibility can chance at anytime. This is the case of why the discount would not apply.
AdaS_VZW
Follow us on Twitter at @VZWSupport
I definitely don’t want to lose you as a customer and I’m prepared to do everything I can to help. Please let us know if you would like to change back to your old plan, so we can confirm it is eligible to receive your discount.

Automatic Benefit Plans based on Date Types in IT0041

Hi
I am having an issue with a re-hired employee. We have two date types in IT0041. Current Hire date and Service Award Date. If somebody is hired for 1st time, both the date types are same( e.g 12/12/2008). and this case the automatic benefit plans follow the config rules properly and some start from the hire date and some from the 1st of following month as per the config ruel.
But If we are re-hiring an employee, in this case Current Hire date( 12/12/2008) would be different from Service award date ( because of his previous experience with this employer). In this case all the automatic plans are starting from the date when the re-hire action is performed, not even the re-hire date and do not follow the config rule at all.
We have never made any dependency of benefit plan on IT0041 anywhere in config, but why this is happening? Any suggestion would be appreciated,
Thanks
Wills

Nope. we never configured the dynamic eligibility part. So that makes it more strange. Because if all the date are same it works fine , but if the dates are different, it gives wrong result

Getting Dependents (IT 0021) of a Benefit Plan

Hi All,
I'm attempting to write a report that will display the name and type of a dependent of a particular EE's benefit plan. I know the link is between DTY01/DID01 - DTY20/DID20 in the benefits table (EX. IT 0167) and The Subtype and OBJPS of IT 0021 (Family). However, I can't figure out quite how to display the family information for the benefit plan. I've done a flat data load in two ODS's .. one for IT0021 and one for IT0167. I would think that an InfoSet would help with this solution, however, any advice would be helpful. The issue is that an EE can have multiple dependents. This is why there are 20 DTY and DID fields.
I'm unable to use the standard BI cube for benefits. This is why I've build custom data targets.
Thanks in advance,
Meezy

Hi Meezy,
This solution is not efficient as you have already thought. What I would suggest for the time being is that link the 2 ods only based on the employees. That way, you will have all the records visible for reporting. Eg: if you have 3 records in 167 and 2 records in 21 for an employee, you can see all the 5 records with all the 20 fields in each record. In the query, you can restrict the records by the required subtype. Now, you can compare objps with each of the 20 fields in the query using calculated kfs. Again, it is not a performance optimized solution.
Thanks and Regards
Subray Hegde

Benefit Plan Termination Through ESS

HI,
can the benefit plan enrollment can be terminated in the portal ess...
is there any standard available..
Thanks,
Nachy

Hi,
There are standar I-views for this.
log on the portal with the super user Id
and follow following path
Content Administration -> Portal Content -> Content Provided by SAP -> End User Content -> Employee Self-Service -> iViews -> Benefits and Payment -> United States -> Benefits Participation , Enrollment , FlexBens Enrollment etc

Enrollment Screen - Validity period for benefit plan

Hi,
At the enrollment screen (HRBEN0001), once click the adjustment reason, the respective benefit types and plans will be listed out. Also, the benefit plans have the "Validity period" showing as well (start date and end date).
I understand that the date is configure at "administrative parameter" and the "adjustment reason" . But I needs to have the validity end date of the benefit plan to be displayed (at HRBEN0001) based on the validity period of the plan itself from table (T5UBA). Is it possible to do that?
Thanks
Nikki

Hi Nikki,
In configuration this cannot be done. However there is some badis that allow you to set up plan records date depending of the type of plan. These badis are:
PBEN0038                       Set dates for Spending Account plans
PBEN0039                       Set dates for Miscellaneous plans
PBEN0040                       Set dates for HSA plans
For other plan types I;m afraid only the dates from administrative parameter" and the "adjustment reason" can be used
Hope this help
Sarah

Benefit Plan Enrollment requiring EOI, existing Benefit pan is delimited

Hi Everyone,
Here is the situation...
When an employee changes his/her benefit plan and enrolls into a
benefit plan requiring EOI, the existing benefit plan record is
delimited, it puts an end date to the existing plan. We would like to keep the existing one active until the pending one get activated when we receive the EOI.
Do you have any ideas?
Thank you!

@Andre
Here is ONE way I have seen it done (a more elegant solution might be possible via User-exit/BAdI/workflow. Several moving parts here so bear with me....
(1) Employee goes online and selects coverage that requires EOI. Say that the max without EOI is $250,000 and the max with EOI is $500,000.
(2) On the screen that shows that coverage, verbiage is added to the effect of "The selection you made requires EOI. Your requested coverage will not be valid until EOI is provided and approved. However, during this transition, you will be covered up to the maximum of $250,00 until time that EOI has been approved."
(3) Nightly, a batch process runs that looks for newly created records with the EOI flag empty (since the employee can not set this themselves, the record will show that it is still needed). At that time, the batch program performs the following...
(4) In the background, the first is for the $500,000 coverage amount but is flagged "locked/inactive". A second record is created for the same dates but for the $250,000 coverage amount....therefore, the employee is in fact covered to the max w/o EOI.
(5) Since there can now be a lag in time....Upon receipt of EOI and approval, an HR admin goes in and deletes the second "hold" record and remove the flag/lock on the original record.
Make sense?

Benefit - Enrollment to delete a benefit plan

Hi,
The requirement is to delete a benefit plan (e.g. DENT) from enrollment screen (HRBEN0001):
a) Is to delete a benefit plan via "Define Benefit Programs" the best way?
a) Currently, there are employees already enrolled with benefit plan DENT and have payroll run with it. Is there any impact that need to be considered?
Thanks
Nikki
Edited by: Nikki_99 on Aug 5, 2010 2:39 PM

I think the requirement probably is to exclude this plan from showing up in 'HRBEN0001' for specific benefit adjustment reasons.
If this is the case, you can remove this through V_74HB_A (for health plan as it's Dental plan). Note, this only exclude the plan from showing up in benefit enrollment; it doesn't prevent user from actually adding this in IT0168 through PA30.
You really don't want to physically remove an existing benefit plan that's either currently or previously used as this would cause inconsistency.
Rgds.

SAP Closed Benefit Plans

Hi All,
We have certain Benefit Plans which are closed , no more new Enrollment in this plan.But existing employees can change their benefit plan option.
This plan has Plan type as that of many active plans. When i try to see this plan in Enrollment workbench i am not seeing this plan.
Whether its because of Closed status and if any workaround for this issue??
Thanks & Regards

Hi Scott,
Thanks for the suggestions scott.Its very much helpful.
Customer is not having ESS as of now.
Also Locked concept here we are using with Closed Name.
How if locked employees will be able to change the options...because i am not seeing that option in workbench???
Thanks & Regards

HSA Benefit Plan: Employee Contr and Employer Contr deductions not happenin

Similar Messages

Maybe you are looking for