HSD DB Replication from Logger

i have built new HDS and connect to logger, replication have started form that day when i start the HDS serices, not all the previous data which logger has.
how to get all the data from logger to HDS?
FYI: ICM version is 8.5.4
Thanks,
Vishnu.

Waiting for reply

Similar Messages

BP replication from CRM to R3 Error

Hi All,
We are working on CRM 4.0 Unicode version. The details of the system are as follows
SAP_BASIS     620          0056     SAPKB62056
SAP_ABA     620          0056     SAPKA62056
BBPCRM          400     0009          SAPKU40009
PI_BASIS          2005_1_620     0005     SAPKIPYJ55
We are working with R/3 4.7 Non Unicode version the details of which are as follows
SAP_BASIS     620          0056     SAPKB62056
SAP_ABA     620          0056     SAPKA62056
SAP_APPL     470          0021     SAPKH47021
SAP_HR          470          0030     SAPKE47030
ABA_PLUS     100          0009     SAPKGPBA09
EA-IPPE          200          0013     SAPKGPIB13
PI          2004_1_470     0001     SAPKIPZI51
PI_BASIS          2005_1_620     0005     SAPKIPYJ55
EA-APPL          200          0007     SAPKGPAB07
EA-DFPS          200          0007     SAPKGPDB07
EA-FINSERV     200          0007     SAPKGPFB07
EA-GLTRADE     200          0007     SAPKGPGB07
EA-HR          200          0011     SAPKGPHB11
EA-PS          200          0007     SAPKGPPB07
EA-RETAIL     200          0007     SAPKGPRB07
BP-R3PF          470V2          0000     -
ST-A/PI          01F_R3_470     0000     -
ST-PI          003C_620     0000     -
I ] Problem
We are having problem while replicating the Business Partners from CRM to R3. When we create a Business Partner ( Type People) through transaction BP on the CRM server it creates an entry in table but000 on the CRM side but the same entry does not exist in kna1 table on R/3 server.
When we check the BDOC through transaction smw01 on the CRM server there exist an entry with BDOC State Description " Send to receivers (not all have confirmed)" for BDOC Type BUPA_MAIN.
II ] Configurations
We have done following settings before creating Business Partners through CRM
Settings on CRM Server
1> RFC Destination "CARDONR3_DEV" for R3 server is defined in sm59 on the CRM side and is working OK.
2> Through transaction BUCF we have defined a number range named C1 ( 0005000000 to 0005999999) with External flag deselected.
3> Through SPRO we have defined a grouring C001 (CRM Customer) and assigned number range C1 to it.
Settings on the R3 server
1> RFC Destination "CMDCLNT110" for CRM server is defined in sm59 on the R3 side and is working OK.
2> Through transaction OVZC we have defined cutomer number range named C1 ( 0005000000 to 0005999999) with External flag selected.
3> Through transaction OVT0 we have created Cutomer Account Group named Z001 which is copy of 0001 (Sold to Party). Number range C1 is assigned to the account group Z001.
4> Through transaction VOPA we have maintained the Partner function for customer master i.e Acct Grp Z001 is assigned to Function SP.
5> In transaction PIDE under CRM -> R3 assignment we have selected account group Z001 to Classification type B (i.e Customer)
III ] Procedure Followed
1> On the CRM server we execute the transaction "BP" .
2> We Click on Create Person button.
3> Following Selections are made
     a) Create in role : Sold-To-Party
     b) Grouping : CRM Customer
     c) Field Title, First name and Last name are selected
     d) In the tab Classification we select R/3 Account Group as "0001". System does not allow us to select the R/3 Account group "Z001"
4> On Saving the entry Business Partner is created in table but000 on the CRM side.
5> The above entry is not replicated in table kna1 on R3 side as expected.
IV ] Observation
We are not able to select account group "Z001" in the BP creation screen. When we run the Intial Load (R3AS) on CRM server for object "DNL_CUST_ACGRPB" (i.e AccountingGrp Business Partner) (Replication from R3 to CRM) it shows the status done in screen R3AM1 but the entry for account grouip Z001 which is created manually on R3 side during the configuration phase is not replicated on the CRM side.
We have referred a note for the above error which said that the basis patch "SAP_BASIS" should be at level 56 but we are already on Patch Level 56.
Please guide us.
Thanks & Regards,
Yatin

Hi Yatin,
Glad to hear one of the problem has resolved.
In order to simplify the analysis, I assume few things
from your information :
1. Connection between CRM and R/3 are correctly run
2. Other necessary customizing Objects relate to BP
   have been downloaded properly to CRM.
Few things you can check :
1. Did you enter Correspondence Language & Language
   in CRM BP ? just make sure you did.
2. Try to complete minimum data such as Search Term,
   Street/House, Postal Code / City and Country in CRM BP.
3. Check the detail Error message in SMW01 (can you get
   more detail - normally you can click on SHOW BDOC Msg
   ERROR)
You also can trace/debug LUW,:
- use tcode SMQ1 to see the stopped queue for that error
transfer
- Click menu Go To -> QOUT Scheduler
Click on R/3 destination and deactivate/deregister it
- In SMQ1 select the error queue, double click on it.
   and after next screen double click again
- Then Start DEBUG LUW
- Insert debug breakpoint in statement Call Transaction
and execute F8
- When it stopped, Change the variable mode to A
it will show you the missing/incomplete fields.
You need to register/activate back the R/3 destination after you have finish debugging.
Hope this helps, let me know the result
Cheers,
Gun.

Scheduled delta replication from R/3 to CRM

Hello Experts,
we are planing to download customer master data from R/3 to CRM. It will be a completely one sided connectivity and we dont want to upload anything from CRM to R/3. And we are planing for Initial load as well as Delta load from only R/3 to CRM. How can I set this?
And the delta down load, we want to perform automatically once in day at a specified time..so is it possible?if yes how?
thanks in advance.
regards,
kalyan

Hi Kalyan,
If You are using the Administration Console to deassign a site from a subscription or a subscription from a site, or to delete a subscription.
The type of the related publication is simple intelligent (sync), simple intelligent (msg) or simple bulk (msg). As a consequence, changes (insert, update, delete) of a BDoc instance are sent to a site only if the site has been assigned the corresponding subscription. The assignment or deassignment of such subscriptions will not trigger a synchronization of the site database.
Example:
Your site Back-End is of sitetype R/3. It has been assigned a subscription for a BDoc type. The type of the publication is simple bulk (msg). The creation of a business object (for example, business partner) with identifier 111111 ensures that this business object will be sent to site Back-End.
After deassigning the subscription in the Administration Console all changes in business object 111111 will not be sent to the site Back-End. In addition, a newly created business object with identifier 222222 will also not be sent to site Back-End.
As you reassign the subscription, the following inconsistencies occur:
Business object 111111 has not been synchronized in the R/3 back-end.
Business object 222222 is not available in the R/3 back-end.
And for scheduling background job for delta replication from R/3 to CRM, i am not sure about it.
Regards
Nadh.

BP Replication from R/3 to CRM

Hi Forum,
I am facing an issue with BP Replication from R/3 to CRM.
Although the same scenario and configuration works well on my dev and qual environment and the same has been trasported to Production, apart from that R3 dev and qual system are completely updated with Prod data as on date so there is no question of any mismatch at the data level and config level.
The following are the error messages am receiving in SMW01 for BUPA_MAIN:
1. Business partner with GUID 36F36B473D31C04985CC8AEB314C6BE3 does not exist
2. Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN
Now none of my BP are flowing to CRM because of this issue.
Appreciate any pointers for the resolution.
Regards,
Amit

Hi Vikash,
The RFCu2019s have been checked for authorisation test, remote logon n local logon. The RFC user is a dialog user and is working well for all logon. I have also checked both the systems they have the logical names as described by you (source & destination both).
Another thing that validated my point regarding the connection setting is that the materials are flowing fine between the system and even the changes in these materials are replicating properly hence the delta for material is also fine.
The Inbound and Outbound queues have been deleted from both r3 and crm and the only job running again at the moment is customer_main.
Regarding you concern for the queue R3AI* it has not been generated even once whenever I have started the initial load. Right from the starting I am monitoring R3AD* in all the outbound and Inbound queues of both the systems.
The sysfail message is coming for R3AD queue hence I think it is of no use to us. Still if I follow the error message it points towards SMW01 and there the error message is the same as described in the 1st message.
I have just noticed 2 BP that have come in CRM as STP but its been hours after that no BP is flowing in.
Now I am eagerly looking out for the final findings that we are going to get from the system when the issue is resolved.
Thanks again and appreciate the efforts taken from your end.
Regards,
Amit

Custom fields mapping issue of sales order replication from R/3 to CRM

Hello Experts,
I have to replicate sales orders from R/3 to CRM system (Initial and Delta)
The issue is I have custome fields in R/3 which are maintained in custom table(Z table) in R/3.
We added those custom fields in CRM customer_i table to synchronise with R/3 data.
To MAP R/3 custom fields to CRM custom fields, i have the following customization.
1. Added the custom function module in the event CRMO_200 and moved all the custom fields into interal table IT_OTHER_INFO.
2. The intrnal table IT_OTHER_INFO with data is passed into CRM standard function modules.
3. But in CRM the BADI 'CRM_DATAEXCHG_BADI' implementation does not have the input parameter of internal table TI_OTHER_INFO.
All my custom data is in internal table TI_OTHER_INFO.
Please suggest where can i map this data to CRM enhanced fields.
Regards,
Umashankar.

Hello Vanessa,
Thank you so much for your reply.
I went through the Note (1053817). It is good. I understand that the custom fields should enhance in the BAPE_VBAP in R/3.
My Scenario:
Goal: Orders replication from R/3 to CRM along with Custom fields.
In R/3, all the custom fields are maintained in Z table (Not VBAK or VBAP).
All these custom fields are belongs to Item level.
In CRM, The custom fields are maintained in CRMD_CUSTOMER_I table though AET.
I need to MAP these custom fields to CRM while order replication from R/3 to CRM.
Regards,
Umashankar.

Restrict Contact Person replication from CRM to ECC based on Partner Funct

Hi Experts
We are replicating Contacts from CRM to ECC, by assigning them to Accounts. We have a scenario to restrict Contact Person replication to ECC only for specific Partner functions (we have 5 such partner functions), for remaining partner functions the contact Persons should not be replicated to ECC.
By Partner function I mean, while making this assignment of Contact to an Account in u201Ccontact Person Relationships datau201D under u201CPartner Function Assignment blocku201D (in web UI) we are adding a Partner function E.g. Author, (same can be seen in GUI, under Usage tab of CP Relationship data).
However we were able to replicate contacts assigned to accounts to ECC in our 5 partner functions, but even the unwanted contacts assigned to other partner functions in CRM are also getting replicated
How can I restrict CP replication from CRM to ECC based on Partner Functions assigned to the Contact Person
Your help is highly appriciated.
Points guaranteed.
Regards

Issue resolved using CRMC_BUT_CALL_FU.
Posing the table name, just in case it might help others.
Thanks

BP replication from CRM to R/3 (ECC)

Hi all,
I have a question regarding BP replication from CRM to R/3.
In transaction PIDE I can only set up one combination of classification B (Customer) and account group, e.g. Z001 for Sold to partner.
What could I do if I need to replicate a Bill-to partner role from CRM to R/3 and the Bill-to partner account group in R/3 is not Z001?
Thanks a lot!
BR,
//Anders

Hi Anders,
While transfering business partner from CRM to R/3 the system only looks at classification and identifies the Account Group form PIDE settings.
For the roles Sold-to, Bill-to, Payer, Ship-to, Classification Customer is Picked Up and hence all of them will be mapped to the same account group.
May be u can try to change the classification of Bill-to Role to something else, and map that to the other account group.
OR
Try to use a middleware exit or BADI which gets called before creation of a customer master in R/3, wherein u can put a code for picking up a different account group.
Wish this helps.
Regards,
Shalini Chauhan

Vendor replication from R/3 to SRM

Hi,
I am using BBPGETVD for the vendor replication from R/3 to SRM.
I need to modify some fields related to Company data and Vendor data of the vendor during the replication (for example: Vendor should always be created with Invoice Receipt Expected check as checked, Transmission media as 'Mail' etc).
Can anybody tell me which BAdi or Exit i can use for this purpose.
Thanks in advance.

Hi,
I believe this thread should goto the dedicated forum for SRM.

User-exit / BADI to control BP replication from CRM into R/3

Hi,
I have a scenario where besides the entries maintained in PIDE for replication from CRM into R/3, I need to control the replication or not concerning another field in CRM BP Master data.
It's something like this:
I need to replicate CRM prospects to R/3, but not all of them. This should be done only when a specific field from the BP master data is filled.
I have to set the entry prospect --> ZXXX (account group in R/3) in PIDE transaction. But them I need something more to check the field in BP master data and prevent the "not prepared" prospects to be sent do R/3.
Do I have any option to filter the replication from CRM into R/3 based in this field?
Another possible option could be the development of a user exit or BADI that controls the BP replication to R/3. Does anybody knows a user exit where I can do this?
Thanks a lot!
Susana Messias

Let me add my thanks to Sukant as well. My requirement was to exclude certain Business Partner Groupings from being uploaded to R/3. I was hoping that the filters applied in R3AC1 would actually have some effect, but they didn't. I don't understand that part yet. SAP must have had something in mind when they allowed filters for both directions of data transfer in R3AC1.
Anyway, as Sukant suggested, I created a ZBUPA_MWX_BDOC_CREATE_MAIN function module and simply added the following code snippet:
* Start of custom code to check whether BP grouping = 0003/0008
LOOP AT ct_bp_extern into ls_one_bp.
    IF ( ls_one_bp-central_data-common-data-bp_control-grouping NE '0003' ) AND
       ( ls_one_bp-central_data-common-data-bp_control-grouping NE '0008' ).
      DELETE TABLE ct_bp_extern[] FROM ls_one_bp.
    ENDIF.
ENDLOOP.
* End of custom code to check whether BP grouping = 0003/0008
Of course I had to create a copy of the function group, copy the includes and global variable declarations from the main program etc. But I was hoping that SAP would make such a simple filter more configurable rather than require coding, no matter how simple. If someone else with more knowledge comes across this thread in the future, please update it to let us know if we are asking for too much to have the filter option provided in R3AC1 actually work (for CRM --> R/3 data transfer).

Stop sales order replication from CRM to R/3

Hi friends,
How can we stop the sales order Replication from CRM to R/3? Pls Guide me.
Thanking u in advance.

Hi Madhu,
You can do by making distribution lock set in further statuses of the CRM sales order.
It will stop replication of CRM sales order to ECC.
Regards,
Madhu

Vendor Master replication from EBP and MM to SUS

Hi !
We would be replicating Vendors from R/3 as well as from EBP to SUS. I believe that there is certain configuration to check duplication of Vendors and also to assign a single business partner ID even if a Vendor is replicated both from EBP as well as from MM. Can anyone thro some light on this & the procedure...
Thanks

Hi,
For the Vedor Maste replication from EBP and MM to SUS,
U need to maintain the proper RFC conncection between R/3, EBP SUS and XI as a middleware.
U can transfer the Vendor by using the T.Code - BBPGETVD.
U can transfer vendor to SUS using
transaction BD14 with message type Z_CREMAS_SUSMM as
SAP suggested.
Your error due to incorrect mapping in Integration
Directory of XI.Kindly check the Interface
determination for message type Z_CREMAS_SUSMM.
Please award the points for the help.
BR,
Vijay Mittal

Vendor Master Replication from MM to SUS

Does any one have experience on Vendor Master Replication from R/3-MM to SUS (scenario without EBP).
Is this replication made via XI?
Which are the configuration steps for this scenario?
Thanks
antonio

Hi antonio,
I hope now you r now transfering vendor to SUS using
transaction BD14 with message type Z_CREMAS_SUSMM as
SAP suggested.
Your error due to incorrect mapping in Integration
Directory of XI.Kindly check the Interface
determination for message type Z_CREMAS_SUSMM.
If possible send more details for error .Is this at
SUS End ?
Regards
Sachin S M

Problem on Material Replication from R/3 to EBP

Hi friends,
I am having a problem on Material replication from R/3 to EBP. I had configured all the required settings in EBP as well as in R/3. Whenever we are starting initial loading R3AS I am getting outbound queues in EBP instead of R/3. I am getting the error like 'The current application triggered a termination'. I could able to replicate Vendor and Locations from R/3 to EBP. If anybody can solve this problem.
Thanx in advance.
Raj

Hi Ahmed,
Could you please elaborate. I am getting runtime error as 'Message_Type_X' (The current application triggered as termination with a short dump).
Thanks
Raj

Receiving email from logger sysadmin

Hi,
I was wondering if anyone might be able to help me here. I've been receiving the same emails in my INBOX over and over again at every 10 minutes with subject "System Log Message".
FROM: <logger@sysadmin>
To: [email protected]
If I view the email header details, I gathered they come with the Public IP address of my netgear router. My SBS server 2003 sits behind this netgear router. Initially, I could tell which of the machines is actually sending that emails out to my mail server.
I then tried to troubleshoot it by isolation one component after another.
So I started off with turning OFF the netgear router with SBS 2003 machine ON. At this stage, I got 0 (zero) of that emails in my INBOX
Then, step 2: turn ON the netgear router with SBS 2003 machine OFF. After 10 minutes later, I received 0 (zero) of the emails in my INBOX
Next, step 3: turn ON the netgear router with SBS 2003 machine ON. At this stage, I don't have any other LAN PCs turned ON except for SBS 2003 Server. After 12 minutes later, I began to receive the emails in my INBOX - one after another at the time interval
of 10 minutes.
The problem is I don't recall if I did anything to tell the server to send syslog in the past.
Any help would be very much appreciated.
Thank you

Hi James,
Just an update. I still keep getting emails from logger@sysadmin so the same problem still persists.
Initially, I thought it was due to the problem with google update service (gupdate) that is unable to automatically start. I removed google toolbar via "add/remove programs" and had also changed it from automatic to manual under Services. I don't know what
else to check. There must be something that is not working properly and that triggers the server to send an automated email with "system log messages".
Any other ideas?
Thank you in advance
Hi,
You mean you are using the Google App to semd emails from the
logger@sysadmin to [email protected]?
I think you'd better involve the Google app mail to verify the issue. I think the mail flow could be like this:
logger@sysadmin - Relay to the Google App mail
-> Google App mail system (Accept the request) - forward to your mailbox
-> [email protected]
So you need to verify whether the Google accept this service account's request. I think the main point here might be related to the Google app mail.
Regards,
James
James Xiong
TechNet Community Support

Replication from 5.2 to 11g failing in Test Env, but works in my Sandbox

I am receiving this error over & over again in error log:
[09/Feb/2012:08:39:59 -0600] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Failed to connect to replication consumer 11gserver.example.com:1636
[09/Feb/2012:08:39:59 -0600] - ERROR<8318> - Repl. Transport - conn=-1 op=-1 msgId=-1 - [S] Bind failed with response: Failed to bind to remote (900).
I've googled & searched here and try the couple of suggestions that I found, but still can't get this to work.
I have gotten this setup once & it is working fine in my sandbox, but now that I am moving into our test environment it isn't working, and I can't find where I've gone wrong.
I have installed a new instance of 11g, on this instance I have:
- Imported Root CA for the 11g server (rootCA1)
- imported Root CA for the 5.2 server (rootCA2)
- Imported SSL cert for this server
- I can perform an LDAP search over ssl without any issues.
- Enabled replication via command line & set password
On the existing 5.2 server I have:
- It already had it's own cert & the CA for that Cert (rootCA2) imported
- I can perform an LDAP search over ssl without any issues.
- Imported the CA used by the 11g server (rootCA1)
- Enabled replication through the admin console, and entered the replication password set on 11g
- attempted to initialize the remote replica from the 5.2 console, this is when the error message starts.
On both servers I have verified that the old & new root CA show up in certutil, and that both servers trust both rooth CA's with "CT,," permissions.
I've compared everything I can think of between my sandbox environment that works & my test environment that doesn't, and I can't see any differences.
Any thoughts? Anything I can check that I may have overlooked?
Thanks
Brian
Edited by: BrianS on Feb 9, 2012 6:59 AM

I just had a thought about this. I tried replicating data from my Test 5.2 server that is failing, to my sandbox 11g server that is successfully receiving replication from my sandbox 5.2 server.
This fails with the same error message, so I believe my config error is on 5.2, but I still have no idea where.

HSD DB Replication from Logger

Similar Messages

Maybe you are looking for