HSRP / interface tracking and not only

Hi All,
HSRP provides nice feature of tracking an external interface, while taking decision with regard to active HSRP router election.
What I would like to ask you is as follows:
In my network all routing decisions are based on Layer2 protocol (NSAP addresses in ATM). On a top of this, I have pure IP network without any dynamic routing protocol (neither OSPF nor BGP is not supported on ATM boxes). Now I would like to bring ATM interface down for a gateway, which does not work as an active HSRP router.
As I mentioned before Layer2 takes a decision for traffic a traffic flow. Im afraid under certain circumstances traffic may hit ATM interface attached the standby router. So what next? Wont be properly routed via HSRP pair. Is my understanding correct?
I would like to have activated only one ATM interface running on active HSRP router, on the standby line protocol should be down. When HSRP re-election process takes place, newly activated router becomes active and in the first order changes protocol line to active. Is that possible?
Just as a last remark, ATM interfaces are monitored (tracked) only. Standby group is configured on Ethernet ports.
Regards,
Artur

Hello Artur,
HSRP 'tracking' feature is solely to take down the 'HSRP STATUS' to up or down and it has no bearing on the actual line protocol state of the interface.
So if you desire that HSRP should bring down the ATM interface, then that is not possible. HSRP tracking would only change the 'priority' of that interface and not bring it down/up.
Let me know if i understood and answered your question correctly,

Similar Messages

HSRP Interface Tracking on ATM Sub-Interface?

I want to enable HSRP interface tracking to monitor an ATM sub-interface. As I understand it, when using the (standby 1 track <interface>) command, the HSRP group priority will be decremented only if the line protocol goes down on the interface being tracked. For this reason I need to track an ATM sub-interface (i.e. atm1/0.77). I am wondering if this will work properly. Has anyone ever used this configuration successfully?

Hi Friend,
I find no reason why it should not work?
When it work for serial subinterface and frame relay interfces it should also work for atm subinterface.
I have implemented in serial subinterface.
Yes it should work fine. Go ahead and implement and update the status.
Regards,
Ankur

HSRP Interface Tracking Question

I have a pair of 7206 routers for Internet access. The Internet was provided over OC3, and used interface POS1/0. I just upgraded the Internet to Ethernet so now the interface is GigabitEthernet 0/3.
I just discovered that there there is another interface that uses POS1/0 as an HSRP tracking interface. So my question is: Can I just remove the old tracking interface and add the new one? Or is there another prefered method to do this?
My current HSRP interface:
interface GigabitEthernet0/1.21
description INET
encapsulation dot1Q 21
ip address x.x.x.x 255.255.255.240
ip broadcast-address x.x.x.x
no ip redirects
ip accounting output-packets
ip flow ingress
ip nbar protocol-discovery
no snmp trap link-status
standby 1 ip x.x.x.x
standby 1 priority 105
standby 1 preempt
standby 1 track POS1/0
Thanks!
Ray

Ray
While it is correct that you can just change the HRP interface to track the Ethernet interface be aware that it may not work quite the same way. With POS and most serial interface implementations if communications with the peer is lost then the loss of keepalives will change the interface state to line protocol down and that is what the interface tracking is looking for. However with an Ethernet interface if you lose communication with the peer the interface may still be in a line protocol up state. In that circumstance interface tracking will not detect the problem.
HTH
Rick

Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album. How do I get them back together again other than a playlist. I do not want the tracks showing up as albums on the Touch?

Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album. How do I get them back together again other than a playlist. I do not want the tracks showing up as albums on the Touch?

Are your tracks pat of a collection? Different artists, but still one album? Then mark them a s acollection or set the album artist. See this guide on how to group separate tracks into albums:
iTunes: Grouping Tracks Into Albums

I can't log in the App store because an from Zambia which is not listed in Apple outlets. How do i go around this as apple products are using globally and not only in the listed countries. My product is a Mac book pro.

I can't log in the App store because am from Zambia which is not listed in Apple outlets. How do i go around this as apple products are used globally and not only in the listed countries. My product is a Mac book pro. i feel this limits how i can use my product

Unfortunately you have taken an Apple product outside of the area where Apple currently does business. There isn't legally a way around this. Apple cannot license apps to you where you currently live.

Why are there no app for PEF Meter Mini Wright on screen converter? Free of course! For to be used by us whith astma and allergy ontroling the PEF meter EN13826-standard with the old Wrigt-McKerrow-scale? We need it in our iPhones and not only in our comp

We need an app for the PEF-scale on screen converter in our iPhones and not only in our computors.
A converter between the new PEF Meter Mini Wright EN13826-scale and the old one Wright-McKerrow-scale for to be able to corectly evaluate the standard of our lungs.
To be honest!
It is a scandal that it is not already a free iPhone app for the on screen converter....

You should contact the company that makes the one for your computer and ask them to make an app for your iPhone. Apple only makes a couple of apps. The other million are made by people like you and I or by companies and are posted to the app store.
How to Start Developing Apps: https://developer.apple.com/library/iOS/referencelibrary/GettingStarted/RoadMapi OS/index.html

Search in "form" and not only in spreadsheet...

Hi, this Numbers is very great!! But there are 2 important features to add in "forms".
1. Most important is the possibility to search in a "form" and not only in spreadsheet. I don't know why they don't add this feature....
2. Possibility to input the excactly number of record that I want to watch in form.
Thanks...there's someone that knows how to do these 2 things?

August,
Since you're talking about Forms, you must be using the iOS version of Numbers. There's a discussion area specific to the iOS version here: https://discussions.apple.com/community/app_store/iwork_for_ios
Jerry

How to see themes on full page of firefox like chrome and not only on the top bar

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/876505]]</blockquote>
how to see themes on full page of firefox like chrome and not only on the top bar

Personas or Lightweight Themes are the ones that just put a background on the toolbars.
You can look for the real (original style) themes here:
: https://addons.mozilla.org/en-US/firefox/themes/
:and you should be able to easily identify them by their pictures. I would suggest that you pick a theme that is identified under the version information to also run in Firefox 8, so you will be able to continue when you upgrade to 6.0.2 and above.
I am on 6.0.2 and I would be shown 450 themes.
Another method is to install a style using the "Stylish" extension, specifically a global style is what you are interested in. There are 3,697 global styles which is one [http://userstyles.org/categories category] of styles. Styles are not programs but you can put up a background picture of your choosing or color areas. But instead of hundreds to choose from you have thousands and they are mostly variations of another style. One advantage of a style is that you can modify a style to suit yourself with little or no programming experience.
: http://userstyles.org/styles/browse/global

Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

Did you move to iOS 8 via iTunes? Your photos should all be on your iPhone 5s without any issues even if you updated via WiFi. The update should have no impact on your photos other than to have moved any photos in your former Camera Roll to your Photos. When opening the Photo App you should see Photos and Albums available at the bottom of the screen. You can also look at Settings>General>About and looking down the list your should see the word Photos and a Count at the right. This count should represent all of the photos in your iPhone.

How to get multiple midi inputs to stick to tracks and not translate

Hi.. i'm trying to get the following to work:
I have two midi devices.. One on channel 1 and one on channel 13. They are coming in via different ports.
I want to make it so Channel 1 only goes to the track for channel 1, and outputs on channel 1.. and channel 13 only goes to the track for channel 13 and outputs on channel 13..
instead, what i am getting is: if channel 1 track is selected, all input from channel 13 is translated to channel 1. i need channel 13 to stay on channel 13.
i'm new to logic and don't fully understand Environment, but havent been able to figure this out, and its critical for my use that the second keyboard always send through on its correct channel, even if i'm recording on another track. ideally i'd be able to arm both tracks and record with the inputs correctly separated and no translation..
can someone please help?

I ended up making a really complex MIDI patching mixer in the environment to solve this problem, but a simple solution exists:
1) Create a Multi-Intrument (Turn the Port: Off, make sure the box is Checked next to Icon and activate all Channels) in the environment layer that houses your Physical Input.
2) Wire the SUM of the Physical Input to the new Multi-Intrument
3a) Wire the Multi-Instrument to the Sequencer Input
3b) Wire the next node of the Multi Instrument to a Splitter
4) Wire corresponding channels to your object of choice (either a MIDI Instrument or Audio Instrument)
5) Goto you arrange and create tracks for the Multi-Instrument you made (just as you would for an outboard synth)
6) Goto your Recording Prefs (option + R, I think) and check 'Auto Demix by channel....'
7) Arm the Multi Instrument, and press record...
8) Play both keyboards and they multitrack record (FYI!!! When recording, make sure you have one of the MIDI tracks selected---during the recording, it will come in as one region, but once the recording is stopped it will demix them to the appropriate tracks)
You can download the environment layer I made to do this here to help you out if you get lost. (It just has a lot of stuff you may not need.)
Good Luck!

CAN I ENLARGE THE SIZE OF ALL TRACKS AND NOT JUST THE ONE TRACK AT A TIME

I would like to enlarge the tracks on the top half of the mix screen and not just the one track I'm working on. I find that most times I'm working in 2 or 3 tracks only and it would be great if I could enlarge the size of those to work with rather than the thin tracks they appear as. I realize if I click on one that it will appear larger below to edit but can I have all the tracks recorded appear larger?
[email protected]
Ross

NO

How can I find out the overall time and not only the time of a single clip?

I have set up two cameras in one room. Both cameras record the same thing from different perspectives at the same time. I have found an interesting scene for video 1 (recorded by camera 1). Now I would like to find the time at which the interesting scene takes place in video 2.
However, I have not seen any way to get displayed, at what time the scene starts in relation to the total length of the video (e.g: scene starts after 5 minutes from total 10 minutes).
The indicated time refers only to a part of the clip and not to the overall project, even if a special clip is not selected. Does anyone know, how I can find out the time?

Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.

How to get contacts in my Mac Book Pro (and not only on iCloud)

Hello. God Icould for contacts, works well between Mac Book pro (MBP) and Ipad .. but on the MBP I have only the "iCould" contacts and not the "on My Mac" contacts.
So when I connect my blackberry to grab Mac contacts, none are transfered as the balckberry seems to locate only the contacts on the Mac Book (not the ones on iCloud).
Thanks a LOT if you have any tip

Go to users and groups and choose only your iCloud Contacts to display.
Ensure that nothing is typed in the search field.
Click to select the first contact and shift-click the last to select them all.
Drag the list of contacts to your desktop.
Make sure your On My Mac account is your default account (preferences > general).
Select All On My Mac contacts from users and groups.
Drag the file you previously dragged to your desktop back onto Address Book.
You might want to back up all your contacts before you begin.
Select All contacts in users and groups
Click to select the first contact and shift-click the last to select them all.
Drag the list of contacts to your desktop.

Photoshop CS6 unusable -interface freezes and not enough memory message - on a specific hardware

I usually speak french but I'll try to be as clear as possible.
I work as a technician in a school and we're experiencing a major issue with Photoshop CS6.
We have 3 differents computer's hardware. Photoshop CS6 works fine on 2 of them.
On the other though, Photoshop CS6 is unusable. With this specific hardware, Photoshop has the same weird behavior on each machine (around 50), so it's not related to an hardware malfunction (like bad ram) I suppose.
Our problem is this: Once Photoshop is opened and you minimize it in the task bar, as soon as you maximise it to use it again, the interface doesn't respond well at all, the interface is all messed up, some windows are missing and most of the time Photoshop freezes. And after that, whatever we try to do, like selecting whatever option, we have the ''not enough memory'' message. So we can't do nothing with the program after that, from selecting another tool to saving a file.
Even when no file is opened and we have plenty of RAM that can be used, the problem is there.
The same problem occurs if we open a window above Photoshop (internet, word, everything). As soon as we go back to work in Photoshop, the interface freezes and windows are missing, and we get the same not enough memory message every time.
We already tried to change/desactivate each performance settings in Photoshop, we already installed the latest Photoshop CS6 update.
We've updated BIOS, processor driver, graphic card driver, etc.
We have this problem with Photoshop CS6 64 bits and 32 bits.
We dont have this problem with any other program in the CS6 suite.
We dont have this problem with Photoshop CS5.
We have the same graphic card and driver on the others computers where Photoshop CS6 works perfectly well.
What's bugging us is everything else in the production suite works fine!
Please, do you think of anything else we can try?
We're hopeless!
Here is the specific hardware where the problem occur.
Hardware:
Dell Inspiron T3500
Intel XEON e5220 2.27 ghz
6 GIGS (RAM)
Quadro FX 1800
Plenty of available hard-disk.
VRAM: 768 MB
OPEN GL: Version 3.3
Windows 7 Professional SP1

Yes! There it this (sorry our Photoshop version is in french since we are a french school, I hope it's still useful to you) .
Please note that it's not with the latest Adobe update available, but we've tried it on an other computer but I can't access it right now. But the adobe update did'nt solve the problem either.
Version Adobe Photoshop : 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Système d'exploitation : Windows 7 64 bits
Version : 6.1 Service Pack 1
Architecture système : UC Intel Famille :6, modèle :10, niveau :5 avec MMX, SSE Entier, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Nombre de processeurs physiques : 4
Nombre de processeurs logiques : 8
Vitesse du processeur : 2266 MHz
Mémoire intégrée : 6142 Mo
Mémoire libre : 4316 Mo
Mémoire disponible pour Photoshop : 5361 Mo
Mémoire utilisée par Photoshop : 60 %
Taille de la mosaïque d'images : 128K
Niveaux de mémoire cache de l'image : 4
Dessin OpenGL : Activé.
Mode de dessin OpenGL : Standard
Mode OpenGL normal autorisé : Vrai.
Mode OpenGL avancé autorisé : Vrai.
Anciens GPU OpenGL autorisés : Non détectés.
Fournisseur de la carte vidéo : NVIDIA Corporation
Module de rendu de la carte vidéo : Quadro FX 1800/PCIe/SSE2
Affichage : 1
Limites d'affichage : = haut : 0, gauche : 0, bas : 1200, droite : 1920
N° de la carte vidéo : 1
Carte vidéo : NVIDIA Quadro FX 1800
OpenCL Non disponible
Version du pilote : 8.17.12.9573
Date du pilote : 20120209000000.000000-000
Pilote de la carte vidéo : nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Mode vidéo : 1920 x 1200 x 4294967296 couleurs
Nom de la carte vidéo : NVIDIA Quadro FX 1800
Mémoire vidéo : 768 Mo
Taille de la texture rectangle vidéo : 8192
Numéro de série : 92278706405826761289
Dossier de l'application : C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Chemin des fichiers temporaires : C:\Users\elebel\AppData\Local\Temp\
Le disque de travail de Photoshop comporte l'E/S asynchrone activé.
Volume(s) de travail :
C:\, 405,5 Go, 363,7 Go libres
Dossier des modules externes obligatoires : C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Dossier principal des modules externes : C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Dossier des modules externes complémentaires : non défini
Composants installés :
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Modules externes obligatoires :
   3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ADM 3.11x01
   Aérographe 13.0
   Aplatissement 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Aquarelle 13.0
   Asymétrie 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Barbouillage 13.0
   Bas-relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Carrelage 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Cisaillement 13.0
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   CompuServe GIF 13.0
   Contour accentué 13.0
   Contour déchiré 13.0
   Contour encré 13.0
   Contour lumineux 13.0
   Contour postérisé 13.0
   Contraction 13.0
   Coordonnées polaires 13.0
   Correction de l'objectif 13.0
   Couleurs NTSC 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Couteau à palette 13.0
   Craie/Fusain 13.0
   Craquelure 13.0
   Crayon Conté 13.0
   Crayon de couleur 13.0
   Cristallisation 13.0
   Croisillons 13.0
   Découpage 13.0
   Demi-teintes couleur 13.0
   Désentrelacement 13.0
   Diagonales 13.0
   Dicom 13.0
   Dispersion 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ecart type 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Effet mosaïque 13.0
   Effet pointilliste 13.0
   Emballage plastique 13.0
   Enregistrer pour le Web 13.0
   Entropie 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Eponge 13.0
   Etalement 13.0
   Extension WIA 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Extrusion 13.0
   Fibres 13.0
   Filtre Collection d'images 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Filtre Rogner et désincliner les photos 13.0
   Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Flou de l'objectif 13.0
   Flou optimisé 13.0
   Flou radial 13.0
   Fluidité 13.0
   Format IFF 13.0
   Fresque 13.0
   Fusain 13.0
   Galerie de filtres 13.0
   Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Grain 13.0
   Grain photo 13.0
   Grand-angle adaptatif 13.0
   Halo 13.0
   HDRMergeUI 13.0
   Insertion filigrane 4.0
   JPEG 2000 13.0
   Lecture filigrane 4.0
   Lueur diffuse 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Médiane 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzo-tinto 13.0
   Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Moteur 3D Photoshop 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Moyenne 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Moyenne 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Multiprocesseur 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Néon 13.0
   Noir/Blanc 13.0
   Noyau de mesures 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Nuages 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Nuages par différence 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Océan 13.0
   Onde 13.0
   Ondulation 13.0
   OpenEXR 13.0
   Papier gaufré 13.0
   Papier humide 13.0
   Pastels 13.0
   Patchwork 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Peinture à l'huile 13.0
   Photocopie 13.0
   Pinceau à sec 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Placage de texture 13.0
   Plâtre 13.0
   Plume calligraphique 13.0
   PNG 13.0
   Point de fuite 13.0
   Pointillisme 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Portée 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Réticulation 13.0
   Rogner et désincliner les photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Routines FastCore 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Routines MMXCore 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Solarisation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Sommation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Soufflerie 13.0
   Sous-couche 13.0
   Sphérisation 13.0
   Sumi-e 13.0
   Support de script 13.0
   Tampon 13.0
   Targa 13.0
   Tourbillon 13.0
   Tracés vers Illustrator 13.0
   Trame de demi-teintes 13.0
   U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Variantes 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Verre 13.0
   Vitrail 13.0
   Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Zigzag 13.0
Dossier des modules externes tiers et facultatifs : SANS
Modules externes dont le chargement a échoué : AUCUN
Flash :
   Mini Bridge
   Kuler
Modules TWAIN installés : AUCUN

I pod classic 160gb skips tracks and will only play sometimes, i pod classic 160gb skips tracks and will only play sometimes

my i pod classic 160gb is reluctant to play stored tracks and then just keeps skipping tracks. have tried restoring settings and then syncing i tunes twice but still the same.

That is a different issue; the hard drive on your iPod is probably fine.
I seem to recall another post a while back in this forum, where the poster said that there seems to be a limit for the length of a single item on the iPod, and it is 24 hours. Is that the "exact point in each book" that you observe? If true (I have not confirmed), that may be a limitation of the software on the iPod.
If it is possible to purchase audiobooks that are broken into shorter segments (as an option), that may be a work-around. iTunes will still treat it as one book, for syncing, but the segments would be like songs in an album.
If you would like to continue discussing your different problem, it would be best to create a new topic instead of posting in this topic. You can do so by going to the forum category
https://discussions.apple.com/community/ipod/ipod_classic
and clicking Actions -> Start a discussion (along right side of web page).

HSRP / interface tracking and not only

Similar Messages

Maybe you are looking for