HST: Do i need to rephrase my previous question in Spanish?

Why is my question not answered? Do Spanish questions have a higher priority ;-) ?
The question was: is the smartbar visible in webforms? Also in Forms Builder when pushing button 'Run in Web-mode' instead of 'Run in Client/Server-mode'? That's not the case in our environment (default installation).

Harold,
The 'spanish message' was placed a day earlier and IF there was any prioritizing, that, and not the language, would be it. The question you placed on this forum was replied to within 1.5 hours (!) after you put it there. I don't think there is a reason for this sarcastic message only 40 minutes after you sent your question.
Although this OTN discussion forum is monitored by the Headstart team, this is NOT "Oracle Support for free". As you know, Headstart is a Consulting service and not a product and therefore there is no official support.
The idea behind this discussion forum is to allow Headstart users to share knowledge with each other, i.e. answer questions as well as ask them. The Headstart team monitors this list periodically to answer any unanswered questions. For urgent problems that require immediate attention, please contact your local Oracle Consulting organisation.
Kind regards,
Peter
null

Similar Messages

  • I need to remove my previous question? How I do it?

    I need to remove my previous question? How I do it?also how I edit my previous discussion?

    You can't remove your previous question & if 15 minutes have past since posting, you can no longer edit your post.

  • I have Lightroom and want to install it on my new computer.  I do not need to transfer my previous files.  How do I do this?

    I have lighroom on my older computer, which my daughter is borrowing, and I need to download it onto my new computer. I do not need to transfer my previous files, I just want to start fresh on my new computer. How do I do this?

    Download, install, and activate with your serial number
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication ra

    I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication range a month from now?

    The CC version will not activate with your perpetual CS6 license. Download the version from here:
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Your number should work with this version.

  • I need to cancel the previous game purchase that is not uploaded yet.

    My niece plated games in my IPAD2 and accidentally purchase coins in the games but not continue since my credit card security # not entered. Now everytime I downloded free games it keeps on asking to provide the security key in order to continue the billing. I need to cancel the previous game purchase that is not uploaded ye, what will I do?

    Click here and request assistance.
    (63314)

  • Have Adobe Captivate 6 (not interested in upgrading)- Struggling to publish a simulation in a format that QMP can pickup - QMP needs a qml file. previous versions had no problem all had tick boxes for QMP in the Quiz - Reporting Settings but this version

    Have Adobe Captivate 6 (not interested in upgrading)- Struggling to publish a simulation in a format that QMP can pickup - QMP needs a qml file. previous versions had no problem all had tick boxes for QMP in the Quiz - Reporting Settings but this version does not have. If i publish to Flash QMP does not see the file.

    Re:
    The quiz review button is inconsistent - sometimes it shows the ticks and crosses other times it doesn't - did you find a solution? I'd dearly like to be able to tidy up the ticks!
    Thanks
    Sharon

  • Need reporting logic for Previous months sales compared to current month

    Dear Folks,
    I need to design a report that  should give cumulative sales for the month compared with cumulative sales for the same date for previous months e.g. Sales upto 21st May should be compared with sales from 1st to 21st April, from 1st March to 21st March and so on.
    Can anyone provide me a logic or CMOD code how to develop this report.
    Will be great helpful.
    Thanks in Advance.
    Rakesh

    Hi Rakesh,
         To accomplish the required output, you need to create variables that are input enabled and of processing type user eixt in the columns of your report in the query designer. I am assuming that, you would have atleast one variable which is input enabled and of processing type manual entry.
    The user would input a date ( for example may 21) in this variable. You need to capture this value in the user eixt in I-STEP 2. From this value you need to calculate the previous month and pass it to the user exit variable. Below is a sample code,
    ----variable ZPREVDATE:pass the to value from variable ZCURRDAT -
    DATA : LV_CALDAY TYPE SY-DATUM,
               LS_T_VAR_RANGE TYPE i_t_var_range,
               LV_YR(4), LV_MN(2), LV_DY(2).
    WHEN 'ZPREVDATE'.
    IF i_step = 2.
          READ TABLE i_t_var_range INTO LS_T_VAR_RANGE
          WITH KEY vnam = ZCURRDAT'.
          LV_CALDAY = LS_T_VAR_RANGE-high.
          LV_YR = LV_CALDAY+0(4).
          LV_MN = LV_CALDAY+4(2).
          LV_DY = LV_CALDAY+6(2).
    LV_MN = LV_MN - 1.
    CONCATENATE LV_YR LV_MN LV_DY INTO LV_CALDAY.
          ls_range-low = LV_CALDAY.
          ls_range-opt = 'EQ'.
          ls_range-sign = 'I'.
          APPEND ls_range TO e_t_range.
    ENDIF.
    The above code is a rough code that would help you to acheive your logic
    Regards,
    Prem

  • HT4993 i need unlock iphone 4s , previously   used for sprint about 2 years ago, out of contract now. would like to use it fro other carrier . Cant though before you HELP ME! PLEEEEEEEEEEEEEEAAAAAAAAAAAAAAASE

    i need unlock iphone 4s , previously   used for sprint about 2 years ago, out of contract now. would like to use it fro other carrier . Cant though before you HELP ME! PLEEEEEEEEEEEEEEAAAAAAAAAAAAAAASE

    Contact Sprint. They are the only ones that can authorize an unlock. No one else can. If they refuse to unlock, there is nothing you can do but sell the device and get another phone.

  • Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

    Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

    Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

  • In which Board we need to post cRIO related Questions?

    sir,
         In which board do i need to post cRIO related Questions and doubts regarding my application with cRIO .Please help me previously i have posted in  motion control drives as my application is related to motor control using cRIO.bu i am not getting any reply .i couldnt find any cRIO related board in select board option.
    Solved!
    Go to Solution.

    Hi illa,
    You can post your query under the Real Time Measurement and Control
    http://forums.ni.com/t5/Real-Time-Measurement-and/bd-p/280

  • I need to change the security questions but there is no option in the "password and security" option to reset them .......what should i do ???

    i need to change my security questions because i forgot the answers to them ...... plus in the "password and security" option in the "manage account" department where the questions are asked , there is no option to reset the questions so how do i do it ????

    See Kappy's previous write-up.
      Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

  • This is a followup to my previous question.

    This is a followup to my previous question.
    The following code works:
    MyRec.List[1].AdminObject:=createoleobject('NovellGroupwareAdmi n');
    MyRec.List[1].AdminObject.ConnectByDN('SOMEDOMAIN.GROUPWISEOU.S OMEORG','SOME
    -TREE' );
    MyRec.List[2].AdminObject:=createoleobject('NovellGroupwareAdmi n');
    MyRec.List[2].AdminObject.ConnectByDN('SOMEOTHERDOMAIN.GROUPWIS EOU.SOMEOU.SO
    MEORG','SOME-TREE');
    MyRec.List[1].Domains:=MyRec.List[1].AdminObject.Domains;
    MyRec.List[2].Domains:=MyRec.List[2].AdminObject.Domains;
    Having said that I'm getting iffy results when I try to do operations on one
    domain then the other and back ... The Groupwise Admin Object api doesn't
    seem to want to be connected to multiple groupwise systems, even with
    multiple instantiations of 'NovellGroupwareAdmin'
    Question 1:
    1) Is there a way I can tell one instantiation ("You've got the football")
    and have it work reliably, then do the same for the other when I need to
    operate on it?
    2) Is there a natural limit or restriction to this library that I'm
    colliding with?
    3) Has anyone had any success operating on multiple groupwise systems at the
    same time?
    Any help appreciated.

    That should work in theory... however the problem I'm running into is that the job will report a "fail" everytime no matter what because it loses connection with the remote host while it's updating the network drivers. However, on the server, all network
    drivers are in fact updated. The only results I get from the receive-job is a timeout, but if I redirect the actual results from the command to a text file on the server, then just wait 15 seconds for the drivers to complete their install I can read what actually
    happened. I'm not sure why the job is timing out. It waits for a good 30-45 seconds before timing out when the host is only blipping for about 10 seconds, but it never tries to establish a connection back. 
    Reading through, if our servers were updated with powershell 4.0 I could use the InDisconnectedSession
    parameter I think... Hmmmm I'm gonna look into upgrading our powershell versions anyways.

  • We need to reset the security questions but the email address the reset email is being sent to is incorrect.

    The email address in the account details is correct, but I need to reset the security questions is incorrect...
    Forgot your answers?  Send reset secuirty info email to ******@hotmail.com.au  -  the .au part is incorrect, how do I fix it?  The email address in the account details is correct so I'm not sure how this happened.
    Any help would be very much appreciated.

    See Kappy's previous write-up.
      Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

  • I need to reset my security questions but when I send an email to the rescue email it doesn't get to me its the wrong email. help?

    iTunes wont let me download any music and I have over $20 on my account. It says I need to answer my security questions but I don't know the answers. When I try to send an email to the rescue email, it doesn't work. It says the email starts with an "h" but none of my emails start with an "h". I also don't know how to edit the email. Someone please help!

    You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (111154)

  • I need to know all the questions below.  I had to restore my computer to original state and now even if I sign on it won't let me sync my ipad or iphone.  the message is that it is synced to another library and it could wipe out my data on the ipad.

    I need to know all the questions below.  I had to restore my computer to original state and now even if I sign on it won't let me sync my ipad or iphone.  the message is that it is synced to another library and it could wipe out my data on the ipad.  Am I understanding correctly? I am running Windows 7 but have never had any problems.  Thanks

    You need iTunes on the computer. There is no iTunes for your phone. See:
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

Maybe you are looking for