HT and Modem conflict

This MSI system is my second rig, the problem i'm having is that temporarily i have connected my motorola surfboard sb5100 to it, to get on the web while my ABIT system is waiting for spare parts .... problem is that HT and modem on this system cannot cohabit together with HT enabled.
On the MSI system the PC BLUE SCREENS when i go on the net, i have the latest surfboard driver but this does not help, Does anyone know a fix for this as it seems there is a conflict with HT and Modem Driver?
Without connecting to the web the MSI system is ok but not when on line

Johnnyalex,
I'm pleased to find that the problem is solved now but I have removed the 1st two words from your post as this is an open forum on the net for troubleshooting and language used is a big concern for us. Please kindly understand how the forum works. Moan Guide
Thank you for your participation in the forum.

Similar Messages

Cable and internal modem conflict

I have an internal modem conflicting with the cable modem i have. They work, but know that I need to setup the wireless linksys router (wrt160v2)...it deflaults to the internal modem, and i can either connect to the wireless with no internet, or connect my pc to internet but this disables the wireless - but not both. a problem.
Disabling the internal does not work...the wireless still resolves this to it.
I did hte ipconfig/all and sure enough the default gateway for the internal is the wireless.
Any suggestions? sounds like i need to remove this and re-configure the cable modem....

If you have conflicts with the internal and external modem disconnect the internal modem as you don't need the internal modem if you have an external modem and a router...

Fax and Modem with UC560

Dear All,
I have a somewhat tricky configuration to make happen and hope you can help me.
I have a UC560-BRI-K9 (located in Germany) that is connected via BRI/ISDN and also utilizes an external SIP-Trunk.
The UC is shared by two related businesses and the Trunks are separated using COR-Lists.
I am now tasked with making both Faxes and Modems work. Via the SIP-Trunk, I only need T.38 to work for inbound and outbound faxes; no problem here. On the BRI-Port however, it is quite a different story: Here, I need both Fax and Modem working. The modem functionality is required by a Power Generator to call for maintenance in case of failure (or be called on a designated number for preventive checks). Furthermore, there also is a Postage Meter that also requires outbound modem comms.
Digging through the configuration documents, I see that the UC500-Series does not support Fax-passthrough and modem-passthrough to be enabled simultaneously as they are handled similarly.
If anyone has come across a solution for my problem, please let me know.
Thank you very much in advance!
Best regards,
Colin

If you use BRI and the fax or modem is conneceted to a FXS port in the same router, you don't need to worry about anything. It will work fine without any configuration.

Fax and Modem Over IP

Is it successful and reliable to deploy the fax and modem over IP in production? Does it stable enough to replace the PSTN connection?
Do delay and packet drops in the network affect so much for fax and modem traffic?
How about to implement fax and modem over IP via microwave link?

i have read in the article in the web. here is the link
http://www.soft-switch.org/foip.html
1) Can you comment about implementing POS modem over IP is not reliable and workable.
2) What the fine tune need to do most to successfully deploy the POS over IP?
3) We had using Linksys SPA2102 ATA for the POS machine to be connected to the CUCM. Is it recommended brand ATA for impementing the POS?
4) What is your experience implementing the POS modem? To CUCM or any Media gateway or IP PABX?

Issue with Linksys Router and Modem with Vonage Device

Hello,
I have a Linksys Router and Cable Modem. Plus I have Vonage for my home phone. I have been having several problems and now, my Vonage phone will not work at all. I have cable internet and my ISP is Cox Commuication. I do not know how to connect my Vonage device with my Router and Modem. People have been giving me advice, but nothing has worked.
Does anyone know how to intergrate all three of these items together? Basically which plug goes where. Currently my phone is not working. The only thing that is in use right now is my linksys cable modem. I have the power cord plugged in, the blue cord from the modem plugged into my laptop, and the cable from the modem to the wall jack. Please help. Thank-You!
Linksys Router: WRT54G version 6
Linksys Cable Modem: BEFCMU10
Vonage (Motorola): VT2143-VD
Message Edited by preshe79 on 03-16-2008 03:56 PM
Message Edited by preshe79 on 03-16-2008 03:58 PM

The router should be online first. Can you get into the router's configuration page?
The box said windows xp or better... So I installed Linux!

I will be travelling abroad but use time machine and modem at home. Do I need to leave these switched on while away for iCloud to work?

I will be travelling abroad but use time machine and modem at home. Do I need to leave these switched on while away for iCloud to work?

No. iCloud has nothing to do with Time Machine on your computer, and as long as your computer has synched all desired content and settings to iCloud, not only does the modem not need to be switched on, your computer doesn't need to be on either.
Regards.

How to deal with conflict and potential conflict classes?

Some classes are marked as conflict and potential conflict classes in the Classloader Analysis Tool.
How to deal with them?
How to use suggested solutions?

Not double load them.
Conflicting classes can lead to weird exceptions. One obvious example would be if you package
an older servlet.jar version into your application and use the weblogic classloading features, such
as prefer-web-inf-classes, to tell weblogic to use this class instead of the one provided in the
system classpath. This one example which leads to weird exceptions, such as connot process jsp tag...
If you really need a the version of the jar for your application, you have to test it through and through
so that you know you do not run into weird production errors.

Why does Scroll in IOS 8 and Swipe conflict?

Hi guys,
Why does Scroll in IOS 8 and Swipe conflict?
When I use swipe right or swipe left in EA and test it on IOS8 it works fine but if I scroll down
it triggers the swipe right or left assignment ...
Does anyone know a code to not have these two functions in conflict? I usually dodge this feature due to this ongoing
unfixed problem.
Thanks,
Henry Code

http://www.imore.com/having-issues-wallpapers-ios-7-heres-why-and-how-fix-it
 Cheers, Tom

Cable between hub and modem

Hi I had infinity installed yesterday. The engineer installed the hub & modem in my hallway. I explained that my existing setup comprised of 3 desktop computers in the loft and two laptops. From the main bt socket in the hall a cable runs up to the first floor. The engineer said he could fit the hub and modem on the first floor which I did not want as it was in a bedroom by the door. He installed the equipment and connected a laptop using the wireless connection @ 20mb explaining that I could hardwire my desktops if I wanted a faster speed. My question is: Would it be possible to replace (extend) the red etherent cable from the hub to the modem so that I could have the hub in the loft or will I have to run 3 seperate ethernet cables from the hub in the hallway up to the loft. Any help is appraciated Thank you in advance. (sorry I posted this in the wrong form yesterday)

i also had to use a longer ethernet cable from my PC to my hub,about 10ft which i bought on the net,i can give you the web address if needed for ethernet cables.
Q. There is smoke coming out of my open reach box... so can I have a new one.
A. Sorry sir, The fault is showing at the exchange so your box should be ok.
BRING BACK UK CALL CENTRES!!!!!

High Usage, Old PC and Modem Dial-up broadband, La...

Hello , AVG keeps popping up on Firefox with one of the latest usage being over 300mb+, when simply having 4 or so tabs open. High Usage, I have Old PC windows XP and Modem Dial-up broadband, Latest Firefox Browser 15.0.1 (sept2012)
Also netgear Hub Sister uses as wireless I somethimes use with Network cable on my Laptop, Windows 7 again Firefox.
Tried talking to BT customer service but no solution.
Whilst as a amatuer photographer and massive music fan I could be on Fb, Youtube, MySpace, msn all at the same time, msn is Bonkers crazy on flash and adverts etc, and I use an AD remover for FB.
I have tried disabling add-ons and Plug ins on firefox, but this year have had prob 3 or 4 Java, adobe Flash, and Firefox updtaes thus far. i am sure this background stuff could be eating up my usage, yet a non tech user cannot possibly do anything about this.
I post many pics on some sites and looking to do my own web site but if Uploading my images (which i reduce) and viewing others downloading etc I know that would be part of the usage, but I only started getting the Usage Allowance emails in May or June 2012, there was No issue the previous years with BT but Now it is an issue.
But I am pretty sure I was on Unlimited broadband but BT has put me on Option 1 10gb.
This is more of an info post to try and locate what can be done to reduce the Usage allowance
Thanks
DW

Thanks a lot for the reply.
I installed the update, and I think the '..\services.exe' issue might have overcome. (NOT 100% sure though)
But the machine still, Hangs
Or, Auto Shutdown occurs with the msg. '.. the process lsass.exe has terminated unexpectedly'
Let me elaborate the Hang situation a bit, this is very new to my experience. I can launch some programs like Notepad.exe, but when forefox or IE does not run. TaskManager icon appears at the system tray, but the program interface does not appear, as if TaskManager is running while minimized.
And when i try to shutdown the computer from the start menu, the User Log off/Switch User option appears, instead of the Shutdown options.
Any help will be highly appreciated.
Thank you for your time.
-Raquib
Message Edited by duckster on 15-Apr-2008 07:18 PM

Always have to restart router and modem.

I don't think this actually is the airport's fault and this only happens at my house, but maybe someone would know.
I have airport extremes in my G5 and ibook, and a linksys broadband modem, and a motorola router. if i restart my computers or the computers go to sleep i always have to unplug the modem and router to reset them; then the internet finally works. The only place i ever have to do this is my house, it always automatically works anywhere else. Anyone know what could be causing this?

when i first turn on the computer, or wake it up from sleeping the airport wireless recognizes my wireless connection but can't connect to the internet. when i unplug the router and modem i unplug it, wait about 10 seconds then plug it back in. after doing this my internet works fine for as long as the computer stays on. if i turn it off, or put it to sleep again, however, then i must unplug the router and modem again. i don't know why unplugging it works, but i was hoping maybe someone knew what i could do to have it just work automatically.

All Drivers are working fine EXCEPT Audio and Modem drivers on my G430

I have a lenovo 3000 G430 4152C2Q that is 1 month old.It came with Vista home but I uninstalled it and installed Windows XP SP2.I downloaded all drivers from Lenovo's official site for my Laptop's type and installed them. Now I'm not able to install Audio/Sound drivers and not able to connect to Internet as it's giving me some error messages for both.(I've installed patches and hotfix already).
I've seen most of the people having same problem, So I tried following instructions given by members in some other posts but still I'm not able to make it finished and same problem is there. Please help me asap with clear instructions so that I can install Audio drivers and modem drivers...as I'm a techie and most of the times I use internet for my work.
I will highly appreciate any kind of help.
Thanks in advance.

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!
Curtis

Manual IP and DHCP conflicts

My Barricade g died (SMC2804WBRP-G). I replaced it with an Airport Extreme (802.11g).
With the Barricade g, I had manually assigned IP address to all the computers on the LAN (range 192.168.x.1-192.168.x.99). The router distributed IP addresses to the wireless clients via DHCP range (192.162.x.100-192.168.x.200)
I've setup the AEBS to Distribute IP addresses and selected Share a single IP address (using DHCP and NAT).
BUT, the AEBS is assigning some of the manual addresses to wireless client IP requests. Then the computer that is supposed to have a manual IP address doesn't have one. Basically, the manual and DHCP addresses are coming from the same pool and causing conflicts.
How do I deal with manual IP addresses AND DHCP with this router?
Thanks

David,
Thanks for the input. But, I may have misread my post.
From my original post.
'With the Barricade g, I had manually assigned IP address to all the computers on the LAN (range 192.168.x.1-192.168.x.99). The router distributed IP addresses to the wireless clients via DHCP range (192.162.x.100-192.168.x.200).'
In other words, on the network, LAN=static IPs, Wireless clients=DHCP.
You can have both static and DHCP on the same network.

Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

Detect / Resolve Conflicts: Automatically detect and resolve conflicts

Hi
From documentation:http://technet.oracle.com/products/oracle9i/daily/jun05.html
" Detect / Resolve Conflicts: Automatically detect and resolve conflicts "
I know that the detection of the conflicts between versions is automatic, but I didn't know that the resolution was also automatic.
So Can you tell me, please, in which cases the resolution of conflicts is automatic?
thank you in advance
(sorry for the previous message)

Just to follow up on Arun's reply: The Workspace Manager manual has the correct information (i.e., conflicts are detected automatically, but must be resolved manually). The error is just in the OTN document that you refer to.

HT and Modem conflict

Similar Messages

Maybe you are looking for