HT1040 I continue to get "stuck" in the preview mode.  No pdf. is ever generated.

I have updated my credit card information.
This is an 80 page book.
I get to "your book is being prepared" and then get on hourglass after it is 1/5th through.
Any ideas?

Hi
Sorry for delay Response 
Did You tried setting passive mode after logging into the FTP site?
Have you check the firewall settings and the firewall log on Windows?
You need to two scripts to execute the task as following:
Script 1 (scriptname.bat): To call the .bat script with your code to execute.
ftp -i -n -s:yourscript.bat
Script 2: Actual code you want to execute which in my case is to copy files from ftp to specific local directory.
open ftp.domain.com
user username
password
cd /ftpDirectoryYouNeedToCopyFrom
lcd C:\DirectoryYouWantToCopyInto
mget * 
bye
Hope This will Help
http://www.santanunayak.com An MVP From Microsoft

Similar Messages

  • Why does my iMessage always get stuck in the sending mode?

    Whenever I try to send an iMessage it gets stuck in the sending mode and just sits there and in hardly receive my messages because of it, please make this stop. My parents both have iPhones and theirs don't do it.

    The sending and receiving of iMessages is dependent on an active data connection. If you are sending, the recipient has to have an active connection as well, and this can result in the behavior that you are describing. Try double tapping on the home button and finding the Messages app in the multi-tasking tray. Touch and hold the icon until it starts to wiggle. Tap on the minus sign to close it. Do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, open the Messages app and try messaging again. You can try to message with one of your parents right there with you and see how that works.

  • My ipod 5th generation is frozen on the lock screen and i tried restarting it 4 times and it continued to get stuck what do i do

    My iPod 5th generation is stuck on the lock screen and I tried restarting it 4 times and it continues to get stuck on the lock screen. What do I do.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Messages getting stuck at the end of sending

    I have an iPhone 5 running iOS 6.0.1 and often my text messages will get stuck at the end of the sending progress bar.  Like this: http://i.imgur.com/iqxjo.jpg It'll slowly progress towards that point and then it'll just stop.  It will sit there anytime from a few seconds to a few minutes.  It usually happens to regular texts, but it occurs with iMessages occasionally too.  I can assure you it's my coverage/Internet connection is fine when this occurs.  I've contacted Verizon Wireless and they've done countless troubleshooting such as resetting things on their end, sending me a new iPhone, SIM card, etc.  I've done restores, I've used it without restoring form a backup, on a new phone, etc. and it continues.  This problem has NEVER occurred before I got my iPhone 5 running iOS 6.  iOS 6.0.1 didn't fix anything.  Considering iMessage is doing it too, I'm beginning to believe it's a glitch in iOS or the new iPhone.  Please help, this is a really annoying bug and anything would help.  Is anybody else having this issue? Thanks!

    I have solved it by this steps:
    1-I have removed the current iTunes(version 10.4.1)
    2-I have downloaded the iTunes from apple sites and installed
    3-after the installing process finished I want to the iTunes properties and the compatibility tab and marked 'Run as administrator'
    4-I lunched  the iTunes and gone through the security question and after that plugged in the iPhone and successfully restored it

  • My macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

    my macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

    Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

    Jai141 wrote:
    ... and im not sure as i brought the phone of someone else..  i will have to ask them
    Good Luck.
    Jai141 wrote:
    Thanks
    You're Welcome.

  • Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error ,

    Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
    This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
    (NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
    (NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
    (NAND) WMR_Start: 149 apple PNN  NAND Driver, Read / Write
    (NAND) WMR_Start: 174 FIL_INT (OK)
    (NAND) WMR_open :371 vfl_open (ok)
    (NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
    (NAND) WMR_open:420 FTL_open      (ok)
    (NAND)_publishServices:642 FTL capabilities: 0x00000001
    (NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
    (NAND)_fetchBorrowedList:881 number of borrowed blocks 16

    Hi Guys!
    I'm German, so my english writing might not be perfect
    I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
    It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
    I almost gave up, thought the Logic Board was bad.
    BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
    Long story short, on mine the front facing camera, and sensor assy were bad.
    Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
    If so, i can live without the sensor and front cam.
    Just wanted to share, good luck everyone.

  • Label of items get 'stuck' on the items....

    Hi everybody,
    I have upgraded Oracle 6i Forms to Oracle Forms 10g v10.1.2 . The peculiar matter is that in the upgraded 10g forms almost 60-70% of the labels of all items (display , text items) get stuck on the upper side of these kind of items...., altough in Forms 6i the labels were not stuck on the items......
    Is there a bug or something i can do except for modifying the X position of the labels manually...?????
    NOTE: In Forms Builder the gap is significant almost as it is in Forms 6i..The problem appears at runtime....
    thanks , a lot
    Simon

    I am using Firefox.  The boxes show up no matter if I sign out and sign back in or not and flash has been updated and it still occurs.  I've attached an image to show you what it looks like.  I've minimized my form to show that the box continues to stay in place.  (My form is a lot longer than what screen capture allows me to show and there are more randomly placed text boxes further down the page.)
    Nicole Atkins  I  Quality Control Coordinator
    Fanatics, Inc. I  Box Seat Clothing Co.
    “Providing the ultimate shopping experience to sports fans.”

  • Internet recovery gets stuck on the spinning globe with the progress bar below.

    Hello Everybody!
    I'm trying to fix the iMac (27-inch, Mid 2010) of my friend. He said it doesn't boot anymore and just gets stuck on the grey screen with the Apple logo and the spinning wheel below. So my first step was to go into the Startup Manager by pressing the Option key after the chime. There I was presented with the Macintosh HD and the Recovery HD. After selecting the Recovery HD to access the Disk Utilities I got stuck on the grey screen with the Apple logo and the spinning wheel again. So I guess the data on the drive is corrupted and might have to be replaced. But before I do that, I wanted to give the Internet Recovery a try. I connected the iMac to the internet using an ethernet cable and pressed Command + Option + R after the chime and the spinning globe appeared with the info: "starting recovery process from network. This may take a while". After a short time the sentences are replaced by a progress bar and a timer that is counting up. The progress bar then moved for a tiny little bit and then nothing happens anymore but the timer keeps counting up. I waited for quiet some time before I gave up. I did not get any errors so I can't provide any other useful information. Can anyone give my some advice? I read in other posts that the ISPs of specific countries block ports which are needed for the internet recovery. I'm in Thailand right now. Does anyone know if that might cause the problem?
    Thank you for all your help!

    Neither we nor Apple support jailbroken iDevices.

  • HT4623 My ios update keeps getting stuck on the Restoring iPhone software stage. I uninstalled iTunes and reinstalled it again, but still nothing. Now I can't even use my phone as it shows the plug into iTunes screen. Please help!!!! Thanks,

    My ios update keeps getting stuck on the Restoring iPhone software stage. I uninstalled iTunes and reinstalled it again, but still nothing. Now I can't even use my phone as it shows the plug into iTunes screen. Please help!!!! Thanks,

    A Restore first downloads a new copy of iOS to your computer. On a slow Internet connection this can take a long time. How fast is your connection? How long would you expect it to take to download 900 MB?
    That's assuming nothing is interfering with the download. Some firewalls and antivirus programs will block the download or slow it down. So you should temporarily disable your security software. Security software can also block the update after the iOS download is complete.

  • I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, I get stuck in the same loop and can't sign in!

    I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!

    If you want to use it, click Review and check your account information.  Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.

  • I tried to eject a cd, didn't work so I turned off the computer and now it keeps getting stuck at the gray screen. How do I fix it?

    Here are a few more details. I put in a game cd for a windows computer, once I opened the folder on the desktop I noticed the install application was .exe so I tried to eject the cd but no matter what I tried on the computer it wouldn't come out. I will say though that I didn't try the manual cd eject cause I didn't have anything small to hit the button in the cd drive with. It was getting late so we decided to just turn off the computer and leave it for the next day. I can't remember if we turned the computer off with apple shut down or by holding down the power button but we walked away pretty quickly before it was fully shut down. The next day the computer won't turn on. When I walked into the room I was the computer stuck with a grey background with the apple logo showing and the circular thing under it frozen. Since no one was in the room I held down the power button and turned the computer off. We tried to start the computer again later but again it keeps getting stuck at the same spot. Now when we hold the power button down to turn it off I'm not sure if it's really turning off all the way. The screen goes dark but it sounds like the fan is still going. I tried disconnecting everything but the keyboard and mouse but when I started it up again it got stuck on the grey screen with just the apple logo. I'd really apprechiate help on this cause I live in Germany right now and support call centers work so much worse when you don't speak the language well... Thanks for any help you can give!

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • My ipod nano 4th generation will not turn on when i rstart it it gets stuck on the apple icon screen what do i do

    my iPod will not turn on when I charge it or restart it it just gets stuck on the apple icon screen what do I do to fix it

    Hello crimsonflare,
    Try this first:
    Apple - Support - iPod Troubleshooting Assistant
    If that does not work, use this:
    Putting iPod into Disk Mode
    and try to restore you ipod.
    Hope this helps.
    ~Julian

  • My printer hp photosmart c4680 is stuck in the scanning mode how do i get it out to print again need

    My printer hp photosmart C4680 is stuck in the scanning mode how do I get in back to the printing  again I need help please

    i have this problem too! have you fixed yours yet?

  • I can't upload our packaged app. Each time I attempt to upload the zip file the system uploads it and then it gets stuck on the "validating .....zip" part. :(

    I have created an app in accordance with your requirements. Most notably, the app runs well and error free in your provided simulator. However, as I attempt to submit the app on the https://marketplace.firefox.com/developers/submit/ page, immediately after the .zip file (contains the required manifest.webapp in the root directory) is uploaded, the system just gets stuck at the "uploading APP.zip" part and I am never allowed to proceed. This is quite frustrating. Any help with this matter would be greatly appreciated.
    Regards,
    Ethan-Anthony

    Hi,
    This is more of an end user support forum so I'm not sure that many of the people here are best placed to answer questions about submitting apps to the marketplace.
    The best thing would probably be to connect to the #app-reviewers team via IRC. Then you can chat directly with them and get answers to your questions.
    See here for details on how to connect to IRC: https://wiki.mozilla.org/IRC
    Alternatively you can email: [email protected]
    Also see here for more information on Reviewers/Apps/Testing:
    https://wiki.mozilla.org/Marketplace/Reviewers/Apps/Testing

Maybe you are looking for