HT1108 Unhitch Website from Moble Me Server

I got my domain name from a provider, designed the site with iWeb. Pointed my web host provider to the Mobile Me servers and published the site. My problem is I need to unhitch from the Mobile Me and need the server name, Where can I find them?

It was not your web host that you pointed to MobileMe, it was your domain name that you pointed to MobileMe and all you need to do is go to your domain name registrar and delete what you set up there to forward your domain name to MobileMe. This would either have been CNAME forwarding, in which case go to the DNS settings and cancel it or it could have been web forwarding, in which case you need to go to the web forwarding settings and cancel it there.
You should not need any kind of server name to do anything. Did you get your domain name and hosting from the same company? If so, then you need do nothing else other than cancelling whatever forwarding you had to MobileMe. If your domain name and hosting are with different companies, then you need to point the nameservers of your domain host to your hosting company. To get the nameservers for your host you need to log into your account wherever you purchased your hosting account from and get them there and then go back and log into your domain name registrar account and replace the other nameservers with that of your host.
You need to get info from both your domain name registrar and your new host/server. If these are the same then you need do nothing else. Ultimately this is not an iWeb or MobileMe problem. You need to look at domain name registrar level and hosting level.

Similar Messages

ICal reports that it can't find server, and lots of data from several years ago is trying to get attention. Cannot bring up calendar in any view to use. also keeps loading unused calendar websites from long ago. I can' remove them. what to do?

iCal reports that it can't find server, and lots of data from several years ago is trying to get attention. Cannot bring up calendar in any view to use. also keeps loading unused calendar websites from long ago. I can' remove them. what to do?

UPDATE: I had 36 Safari windows open and minimized on the dock from my last session; 20 of those windows failed to open b/c Safari "couldn't find the server"; I just went to the URL bar of all 20 pages and clicked return, and all 20 pages loaded perfectly, without dropping any images or losing formatting. This is a puzzle!!!

How to Install BAM Alerts in multi environment in 2013 R2? How to point to a single BAM Portal(Default WebSite) configured on BTS APP server1 from BTS App Server 2 and BTS App Server 3 ?

Please guide me on BAM install in multi environment for 2013 R2. Any blog which can show, how to configure multiple BTS servers to point to a single BAM portal created on the first server.
The BAM portal is configured on the Default Website on the first server.
How Could I Point to the same portal while configuring other 2 BTS servers?
What are the authentication mechanisms, I have to use at virtual directories and root level?
Racha Rams

The document for installing BAM for B2K13 in a multi-computer environment is available as part of the BizTalk documentation available for download from
http://www.microsoft.com/en-in/download/details.aspx?id=35552
You will most likely also need to refer to the TechNet Blog
http://blogs.technet.com/b/meamcs/archive/2013/07/26/fixed-biztalk-2013-bam-tools-configuration-problem.aspx which mentions having to setup SQL Mail feature in SQL Server 2012 and post that configuring both the features BAM Tools and BAM Alerts together.
Regards.

Is it possible to import the website I completed in Muse from the ftp server back into Muse?

I have lost the Muse files for my site (due to a stolen laptop). Is it possible to download the site files from my ftp server and import the files back into Muse (without having to rebuild the entire site)? My site is hosted by GoDaddy cPanel, and I am running Windows 7 on my (new) laptop. Bumming out here and could use some help. Thanks!

Yes, go to your GoDaddy control panel and somewhere there will be a download your HTML button.

Website issue with osx server and hosting

so i had a website hosted from my osx server and i had bought the domain name from godaddy it worked great but i desided to instead of hosting it on my osx server to just host it on godaddy so i turned to server off and added the domain to my godaddy account hosting and now it works but one problem all computers can veiw the website but mine. i think it has somthing to do with the fact that my mac was the one hosting it. but if i go to my browser and go to my wesite i get a error but than i go to any other computer and it works great help please

A couple ideas
check our /etc/hosts file, you might have an entry for your domain.
sudo pico /etc/hosts
     do you see any entries for your domain? If so:
     edit the file by navigating with the arrow keys, delete the line
     with your domain. Hit ctrl-x when done (enter 'y' to save the change)
Clear your DNS cache
     dscacheutil -flushcache
Try a different DNS server, go into your network settings (In System Preferences)
Go to Ethernet or Wifi (whichever you are using), click Advanced and under the DNS tab enter:
     8.8.8.8
Make sure no entries are ABOVE it.
If none of this works, send the results of these commands:
     cat /etc/hosts
     cat /etc/resolv.conf
     dig +short mydomain.com   (replace with your domain)
The results of these should point us in the right direction.
Jeff

Smooth transition from Mountain Lion Server to Mavericks Server 3.0!!

After an new OS release that are always complaints about installation and configuration problems. First comers to using any new software tool provide valuable feedback we generally hope will help improve the new product. It's how things have worked since the first 6503 Apple II's and 8086 IBM PC's.
I've been using and upgrading PC's since THOSE DINOSAURS! And I can't remember EVER having an OS upgrade go as smoothly as my recent upgrade from Mountain Lion Server (OS X 10.8.5 w. Server 2.2.2) to Mavericks Server 3.0.
I chose to do a clean Mavericks install on a clean partition created on a 1 TB disk that was upgraded into my trusty MacBook. I used the DiskmakerX app to create a Mavericks installation USB drive. When the screen came up with the option to import users, programs & files (took a pass on email) from the Mountain Lion Server partition, I let it run overnight to transpose everything of value into the clean Mavericks installation.
The next morning the only program that wasn't PERFECTLY installed and configured on Mavericks was Server 2.2.2. I deleted it and bought/installed Server 3.0. After Server 3.0's setup ran that only thing I had to do manually was start Postgres! My domain setting, DNS, all my web applications that were set up on Mountain Lion Server were all GOOD TO GO again on Mavericks Server!
I'm disclosing this here, publicly because it was a BIG PAIN to install and deploy all my websites using Mountain Lion's server app. To say the easy transposition into Server 3.0 was an unexpected and pleasant surprise amounts to massive understatement.
Now I'm going to describe two small anomolies I've noticed in either Mavericks or Server 3.0 that other users might want to be on the lookout for. They're not fatal. But they might be "habringers" suggesting underlying problems in either the new OS or the new Server's internals.
The toolbar icon for TimeMachine doesn't "spin" when it backs up. It's not a big deal. But it's convenient to see the circle around the clock whirling so we know when TIme Machine is backing up.
Mavericks Server isn't reporting newly upgraded apps as available under the Updates Tab of the Server's Software Updates subsystem. It might be inconsequential. But with a new OS version it never hurts to let the developers know about the "little things" that don't apparently work.
Kudos to the Maverick's developers for releasing an OS X version that's THIS CLEAN. And hugs to Apple's management for making it a free download upgrade for developers!!!
Full disclosue: I don't now and never have worked for Apple. but I do own a few shares of Apple stock that we purchased many years ago at $14.00 / share. I'm not a big shareholder. But based on my recent seamless upgrades to Mavericks and iIOS 7, I'm a happy one who's not likely to sell any time soon.
If Apple can do for ALL THEIR HARDWARE AND SOFTWARE PRODUCTS what they seem to have done for OS X and iOS, they've got at least a fighting chance to recover from their losses after their stock peaked at about $700.00 /share.
Keep up the good work!
Dr. Bob Blomeyer

After an new OS release that are always complaints about installation and configuration problems. First comers to using any new software tool provide valuable feedback we generally hope will help improve the new product. It's how things have worked since the first 6503 Apple II's and 8086 IBM PC's.
I've been using and upgrading PC's since THOSE DINOSAURS! And I can't remember EVER having an OS upgrade go as smoothly as my recent upgrade from Mountain Lion Server (OS X 10.8.5 w. Server 2.2.2) to Mavericks Server 3.0.
I chose to do a clean Mavericks install on a clean partition created on a 1 TB disk that was upgraded into my trusty MacBook. I used the DiskmakerX app to create a Mavericks installation USB drive. When the screen came up with the option to import users, programs & files (took a pass on email) from the Mountain Lion Server partition, I let it run overnight to transpose everything of value into the clean Mavericks installation.
The next morning the only program that wasn't PERFECTLY installed and configured on Mavericks was Server 2.2.2. I deleted it and bought/installed Server 3.0. After Server 3.0's setup ran that only thing I had to do manually was start Postgres! My domain setting, DNS, all my web applications that were set up on Mountain Lion Server were all GOOD TO GO again on Mavericks Server!
I'm disclosing this here, publicly because it was a BIG PAIN to install and deploy all my websites using Mountain Lion's server app. To say the easy transposition into Server 3.0 was an unexpected and pleasant surprise amounts to massive understatement.
Now I'm going to describe two small anomolies I've noticed in either Mavericks or Server 3.0 that other users might want to be on the lookout for. They're not fatal. But they might be "habringers" suggesting underlying problems in either the new OS or the new Server's internals.
The toolbar icon for TimeMachine doesn't "spin" when it backs up. It's not a big deal. But it's convenient to see the circle around the clock whirling so we know when TIme Machine is backing up.
Mavericks Server isn't reporting newly upgraded apps as available under the Updates Tab of the Server's Software Updates subsystem. It might be inconsequential. But with a new OS version it never hurts to let the developers know about the "little things" that don't apparently work.
Kudos to the Maverick's developers for releasing an OS X version that's THIS CLEAN. And hugs to Apple's management for making it a free download upgrade for developers!!!
Full disclosue: I don't now and never have worked for Apple. but I do own a few shares of Apple stock that we purchased many years ago at $14.00 / share. I'm not a big shareholder. But based on my recent seamless upgrades to Mavericks and iIOS 7, I'm a happy one who's not likely to sell any time soon.
If Apple can do for ALL THEIR HARDWARE AND SOFTWARE PRODUCTS what they seem to have done for OS X and iOS, they've got at least a fighting chance to recover from their losses after their stock peaked at about $700.00 /share.
Keep up the good work!
Dr. Bob Blomeyer

How can I download a file over the internet from a WebDAV server?

I am trying to download a file over the internet from a WebDAV server. I've tried doing it with Datasocket as suggested in these articles,
<a href="http://digital.ni.com/public.nsf/websearch/f3cc5f7e60a75cb2862567e700696abf?opendocument">Retrieving an Unformatted Text File via FTP or HTTP Using DataSocket</a>
<a href="http://digital.ni.com/public.nsf/websearch/4FA09E7B3674DA34C1256BD400555C41?OpenDocument">Download a Text File from a Password Protected URL Using DataSocket</a>
but all I get is error 1181 (protocol unrecognized by Datasocket).
I know I have the URL correct, because I can put it into a web browser and it works fine - I can download the file manually.
But I want to have a LabVIEW program do the download automatically.
I have the internet toolkit, but don't have the foggiest clue how to use it, and am using LabVIEW 7.1
I am a bit out of my depth here, so any advice welcome.
Regards,
Mark.

MIG,
What is the URL to the website? Is it an FTP site? The articles you referenced are for specific transfer protocols. If the stie you're trying to get to doesn't follow these protocols, then you'll get the error you're seeing. You may have to use ActiveX to control IE and download the files programmatically.
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

How to import a website from the internet

How can I import a website from the internet to copy to
use?

See answer to your other post.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"scan reg" <[email protected]> wrote in
message
news:f5tr8b$anm$[email protected]..
>
quote:
Originally posted by:
Newsgroup User
>
> define a new site in dw.
> set the local folder to a new empty folder
> fill in the remote server info with your ftp info.
>
> connect and Get all the files.
>
> What if it's a dynamically generated site?
>
> Can DW grab all the rendered pages instead?
>
> I'm trying to convert from Joomla to DW
>
> Thanks
>
>
>

Creating accounts and receiving email from a mail server

Hi,
I'm wanting to create a web application that creates a new email account for a user when they sign-up on my website. My application will process any email that is sent to that email address and extract parts of the email to store in a database.
I think I can use JavaMail to poll the email accounts for new emails which will then be parsed and inserted into my database but I don't know how to programmatically create the email account for each user. I'm looking at using either sendmail or postfix as my mail server and this is on either *nix or os x.
Any advice/pointers to Java APIs would be appreciated. If there's nothing available in Java that can do this kind of thing I'd love to hear about other solutions people know of or think might work :)
Thanks!
- E

Hi there!
Do the following
message.setFlag(Flags.Flag.DELETED,true);
folder.close(true);
store.close();
these 3 statements will delete email from the mail server.
get back to me after u try this.
ciao
vivek

Retrieve from cache or server: what is Firefox's logic

I clicked on a hyperlink to visit a web site that I had not visited for a couple of months. Firefox showed me the page as it was when I last visited it.
I pressed F5 and the page updated to the latest version.
I don't seem to have this problem with other websites; just this one.
Does anybody understand the logic Firefox uses when determining whether to display a page from the cache or to get the latest page from the web server?
Using Firefox 10; Windows XP

Thank you cor-el. The first link mnot is particularly useful. But what I have learnt is that caching is a black art. The logic is influenced by the browser logic, the browser cache size, the web servers caching rules and the html on the page. Impossible for the user to control; very difficult for the web page author.
So even if I were to understand Firefox's logic it would not help me much.

How can i make iphone mobile website, database in Sql Server 2005 ?

how can i make iphone mobile website, database in Sql Server 2005 ?
Thanks & Regards
Jamshed Ali
Email id: [email protected]

You need to be a little clearer in what you're asking.
You can't make any web site in SQL Server - it's a database engine, not a website tool.
What you can do is create web sites that pull data from a back-end SQL Server, but the SQL server doesn't handle the client connection at all (that's handled by a web server such as Apache, IIS, or similar).
There are many ways to build such a site including .NET, PHP, Perl and more (although I don't know all the options for Windows servers because they're not as common outside of corporate/enterprise networks).
In either case, given your choice of development language (HTML, plus one of the PHP/Perl/.NET/etc. options), plus your database (SQL Server) plus your web server (IIS, Apache, etc.) you can make any web site you like (or, at least, you're capable of developing).
If you want to opimize that web site for iPhones then there are many references on how mobile browsing differs from the desktop. I'd recommend this book as a reference (and, yes, I understand the irony of linking to a paperback book for web design guidance ). Googling mobile web design (or iPhone web design) might yield more results.

Migration from sybase sql server 7 to Oracle 8i

Hi,
We have a very old Sybase database which contains some 2gb of data which is still being used by the users, we want to phase this out. We want to selectively export some tables and import them into our oracle 8i database. I have looked at documentation related to the migration workbench and it wont work for us because the version of sybase database is very old and I cannot find any client software either to help me to connect to the database.
I noticed in this forum, several messages suggesting the use of bcp to export data from the sql server and then sql*loader to import the data into oracle.
Can anybody please send me the information on bcp and how to export data using that and then how to import it in oracle. I am familiar with sql*loader but am not a expert so any help on how to define the control file etc for sql*loader would be helpful.
Thanks

Hi Hari,
You will be able to get the Beta release on this site in the next
couple of days in the 'Software' section of this page.
We are just waiting on our web page administrators to make this
software public.
The amount of interest in the SQL Server 7.0 plugin is
substantial, so we are focussing on making it production as soon
as possible.
Please provide feedback on the beta to [email protected]
Regards
John
Hari (guest) wrote:
: Hello great ones,
: I have a website converted from sql server 7 to Oracle 8i (okay
: the customer just woke up to the reality that Oracle rules in
: the e-commerce world..). I read about the workbench and the
: sqlserver 7 plugin which is still in beta.
: Is there any ways I could get hold of the beta release?. This
is
: a big company and if I could do the job fast, it would result
in
: more business to oracle for they will buy the production
: licenses
: (as well as Oracle Apps) after I show them I am successful and
: Oracle 8i is great.
: Any help would be appreciated and thanks a bunch. I am more
: concerned about database objects other than stored procedures
: only.
: Thanks in advance.
: Hari
Oracle Technology Network
http://technet.oracle.com
null

Passing from MS SQL Server to Oracle. Options?

Hello,
We are going to be passing from MS SQL Server to Oracle (ver 10.2.0.3 on Windows Server 2003).
It looks like there is no Oracle tool which will translate TSQL code so that an Oracle database can read it.
What can be used to pass SQL Server DML statement TO Oracle? What are the options?
Thanks

Nell,
If you want to translate TSQL to Oracle PL/SQL you have a tool to do that.
This is Oracle SQL*Developer, you can download (version 1.5.1 build 54.40 )from this website:
http://www.oracle.com/technology/products/database/sql_developer/index.html
This is a free tool.
When you use SQL*Developer, you have the menu Migration/Translation Scratch Editor.
For example, you can create a connection directly to your SQL server db, display your TSQL procedures and then translate automatically to PL/SQL.
You can migrate automatically SQL SERVER database, or only several tables to Oracle.
If you have question about this tool, please go in the Database/SQL developer forum
I hope it helps you.
Regards
Mireille

Migrating a website from 2008 R2 to 2012 ( iis 8.5)

Hi Need help with the following scenario.
I need to move the entire website from 2008 R2 to new 2012 server, please find the details below.
Web site number : 1
Current Server 2008 R2 ( iis 7.5)
Destination : 2012 ( iis 8.5 )
Is there any migration tool available for the same ?

Hi Joshy,
I agree with Tim. You should post the question in IIS forum. I believe we will get a better assistance there. There is the URL of IIS forum:
http://forums.iis.net/
I also find two simialr threads from IIS forum. It seems that you can use
IIS Easy MIgration Tool to migrate. Please refer to and check if can help you.
IIS 7.5 to 8.5
How to upgrade from IIS 7.5 (Server 2008R2) to IIS 8.5 (server 2012r2)
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Hosting IPv6 Website on Snow Leopard Server

I'm currently going through the IPv6 Certification offered by Hurricane Electric just for kicks and giggles. I already have a IPv6 tunnel running on my Time Capsule router(since my ISP is not providing IPv6 addresses yet) and have a valid IPv6 address manually assigned to my Snow Leopard Server.
I created an AAAA record (ipv6) on my external DNS host that points to the IPv6 address of my server. I also created a website at using the ipv6 subdomain, made sure the site pointed to the IPv6 address of the server and that it was hosted on TCP port 470 (I'm assuming this is the website port for IPv6 - at least Snow Leopard Server thinks so). I also made sure this port was being forwarded from my router.
When testing my website by using an external website tester it says that my AAAA hostname is correct but that it can't reach my website via IPv6. I did make sure to have an appropriate CNAME record for ipv6 on my internal DNS server but I can't add records - at least through Server Admin GUI - for IPv6 addresses. I know this isn't supported via Server Admin GUI but I can't find any documentation on how to add IPv6 addresses for the internal DNS server and if this is even necessary.
I can reach the site when I'm on my internal network - though I'm not sure if I'm reaching it via IPv6 or IPv4. Does anyone have any information or experience on hosting an IPv6 website on Snow Leopard Server?

I found the issue was that I was blocking all incoming connections via IPv6. I edited the firewall to allow ports 80 and 443 and also changed the site to use port 80 (I don't know why Server Admin changed the port to 470 when choosing the IPv6 address) and I was then able to access the website via IPv6.

HT1108 Unhitch Website from Moble Me Server

Similar Messages

Maybe you are looking for