HT1145 i am unable to connect to my wi-fi  it is telling me \unable to join the network  (applenotebook)  my other laptops join with no problem   help!

I am unable to connect to wi-fi with my applenote book... had no problem a week ago.. its telling me    unable to join the network   my other laptop works ok
tried turning it off

Are you using an Apple AirPort Base Station? Try restarting it, as well as your laptop.

Similar Messages

  • My ipad wont accept any passwords, i am unable to connect to my wifi even though my password is correct and other laptops etc have no problem connecting.

    my ipad wont accept any passwords, i am unable to connect to my wifi even though my password is correct and other laptops etc have no problem connecting.
    The ipad can find my wifi connection but just wont accept the password.  connected with no problem in the Apple store.
    any suggestions,
    thanks.

    Does the iPad connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT1338 How do I update osx 10.4.8 if the network admin utility is not compatible with my apple airport extreme and I an't connect to the internet?

    I was given an iMac desktop computer, operating system OSX 10.4.8 (2011). The network admin utility is not compatiable with my airport extreme router, and I am unable to connect to the internet to update the software.   Can someone please tell me how to update the software or download a newer version on the network admin, or how to connect this computer to the internet?
    Thanks,

    I assume you have a PPC.  There is another update for the Intel.
    PPC:
    http://support.apple.com/kb/dl177
    Download. Do not expand.  Copy to your mac.  double click on dmg icon.
    Have you tried an ethernet cable? 
    Ethernet Bridge
    Ethernet Bridge  "The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network."  from linksys example: http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1
    This linksys bridge is the safest solution since it doesn't require any Mac OS drivers.
    Airport ExpressAirport Express is an external unit and you can configure it as a bridge.  802.11n ( I bevieve you will need a more modern version of Mac OS X to configure.  Sadly, Apple uses a configuration program to configure, not a web browser. ) 
    USB dongle
    Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/ 
    Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! 'n' speed is the newest and fastest. $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/

  • I am unable to download the current itunes to my laptop.

    i am unable to download the current itunes to my laptop. It is coming up as not connected. I tried resetting my router and i tried signing in and out of itunes. How do i get the update without losing everything i have on it?

    . The Snow Leopard 10.6 DVD should still be available at this time from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
      If you wait to long and they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

  • I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro.  I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the

    I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro.  I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the installation.  When I click on the Adobe Acrobat icon in the Applications folder, nothing happens.

    Hi Tom,
    kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
    For serial number message try: 
    Error "Invalid serial number" | Acrobat 9 | CS4
    Thanks,
    Atul Saini

  • My mac is the OS X 10.8.3.  I tried to update the latest Adobe flash player and kept getting 'Actionlist not found.'  I have uninstalled, enabled and disabled plug-ins and am still unable to download the update and now have no flashplayer at all.  Help!

    My mac is the OS X 10.8.3.  I tried to update the latest Adobe flash player and kept getting 'Actionlist not found.'  I have uninstalled, enabled and disabled plug-ins and am still unable to download the update and now have no flashplayer at all.  Help!
    PS I'm still new to Macs so the more broken down the better.

    Adobe Flash Player 11.8.800.42 is the most recent version from Adobe. It is a pre-release version. I am using it without any noticeable problems.
    The current stable version is Download 11.7.700.169.

  • I have a modem and a separate router in a part of my house that gets poor reception from the modem.My iPad won't connect to the auxillary router like my laptop does with ease. How do I get the iPad to connect?

    I have a modem, and a separate (hard wired from modem) router in a part of my house that gets poor reception from the modem.My iPad won't connect to the auxillary router like my laptop does with ease. How do I get the iPad to connect? It does see the router in my wi-fi connections list - just won't connect. !

    This article will provide a troubleshooting framework.
    http://support.apple.com/kb/TS1398

  • Unable to access the network

    Ok, I've had this problem for quite a while now
    There's this 1 site that I cannot access on my computer it says "Unable to access the network Google Chrome is having trouble accessing the network." However I can access the site on my laptop, I don't see how I can fix the problem!?

    Bradley750 wrote:
    Ok, I've had this problem for quite a while now
    There's this 1 site that I cannot access on my computer it says "Unable to access the network Google Chrome is having trouble accessing the network." However I can access the site on my laptop, I don't see how I can fix the problem!?
    Hi. Welcome to the forums.
    Can you give a little more information, mainly the site you're havging problems with.
    Have you tried a different browser ? What OS ?
    There are a wide variety of reasons, security products interferring, hosts file problems, browser issues etc.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • The audio is played through the tv, but the picture plays the first still shot of the moment it is connected then says a message saying "we're sorry" then something about the network provider.

    The audio is played through the tv, but the picture plays the first still shot of the moment it is connected then says a message saying "we're sorry" then something about the network provider.

    Welcome to the Apple Community.
    Please provide a little more detail, such as what you are trying to do when this occurs and exactly what the message says.

  • Why has my ipad mini stopped connecting with my iPhone 4S? I used to use it to download books, or transfer emails to my ipad mini. It was fine 3 days ago, now I get a message saying " cannot join with iPhone" Any help greatly appreciated.

    Why has my ipad mini stopped connecting with my iPhone 4S? I used to use it to download books, or transfer emails to my ipad mini. It was fine 3 days ago, now I get a message saying " cannot join with iPhone" Any help greatly appreciated.

    You can try resetting your iPad and iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • Unable to open the Network connection In WTK2.3

    hi all.
    I am doing an application in which i am downloading the screen details from the XML file, which will be available in the Server.
    with the details i will manipulate the screen in the MIDlet.
    The application was working fine in the localhost, when the asp file and the xml file in the localhost. but when the same was uploaded to my wap site i am unable to download the details.
    But when i am open that url in the Browser it was giving the response. When i am opening that in the MIDlet the application was stopping at the fallowing statement
    con.openInputStream()
    I am unable to use the connection object.I have seen in the Network monitor it was displaying only the opening of the connection, but not the response from the server.
    I am unable to trace out the possibility of error, because the same was working in the localhost.
    Can anybody please tell me the possiblities for happening like that.
    It was urgent, please help me
    Thanks in advance
    lakshman
    Quick response in helpful for me

    Hi Thirupathi,
    Can you send us a screenshot or the error message information ?
    If it is due to status missing (SAP note available for the same)
    Regards
    Terence

  • Windows Server 2012 R2 - unable to change the Network category when is in domain

    HI, I've read articles about this topic but after all tries - i couldn't find appropriate decision and i still have problem. 
    Set-NetConnectionProfile : Unable to set the NetworkCategory due to one of the following possible reasons: not running
    PowerShell elevated; the NetworkCategory cannot be changed from 'DomainAuthenticated'; user initiated changes to Networ
    kCategory are being prevented due to the Group Policy setting 'Network List Manager Policies'.
    At line:1 char:1
    + Set-NetConnectionProfile -InterfaceIndex 16 -NetworkCategory Public
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : PermissionDenied: (MSFT_NetConnect...EA9E84DF602D}"):root/StandardCi...nnectionProfile)
       [Set-NetConnectionProfile], CimException
        + FullyQualifiedErrorId : MI RESULT 2,Set-NetConnectionProfile
    I have  two NIC on my server2 - joined to domain as domain member  ( NIC are public (internet) and private (local net) )  Now they both are in NetworkCategory - DomainAuthenticated.
    I tryed:
    1. Check for Administrator  privileges on Powershell - OK
    2. Try to Change GPO - Network List Manager Policy - to be available for changes from user  - NO success
    3. Check - Local Policy on Server2 - too NO success
    4. Try to change throught command  with PowerShell   ->   Set-NetConnectionProfile -InterfaceIndex 16 -NetworkCategory Public  Again - NO success
    5.
     thru the registry:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles\
    open the network profile that you have to change and modify the "Category" value:
    0 = public
    1 = private
    2 = domain
    NO Success
    Did anybody have some other idea - what to do?
    Thanks in advance.
    Krasimir

    Hi, the topology of th network ist the next:
    ISP (DATACENTER) ->  SRV1 (phisical) +  SRV2 &SRV3 (virtual) 
    Every one of them have 2 NIC  ( for server  2 and 3  - virtual  too)  
    NIC1 - operates on private level -  192.168.1.1 dns, gate,dc (srv1)
    NIC2 - real ip address, gate - gateway of ISP  dns - 192.168.1.1
    When set up NIC1 - everything is ok .
    NIC2 - action is : set ip and mask - enable without gate  - then it is in unidentified status  and  go in public state.
    disable nic2, set up gateway  - and dns - 192.168.1.1  and again enable - everything is ok
    But after restart  - nic2 - goes again in Domainauthenticated mode. :(
    Additional:
    On srv2 - i put RRAs role and smthing stange is that after enable rras service - all ports are shutted and machine pretendet to be invisible.

  • My i Phone drops WiFi connection after just a few minutes and wont reconnect unless I reset the network settings and reboot the  phone?

    My i Phone 4s has suddenly started to drop wifi connection after nealy months of near perfect connections?
    To restore a wifi connection I have to reset the network settings and restart the phone, this only fixes the issues for around 2-3 mins?
    Other quick fixes like switching wifi on and off/ switching to airoplane mode for a few secconds have no impact.
    This is really annoying as I am using my data allowence very quickly, and as the phone is continually searching for a wifi connection the battery time has reduced dramatically.
    I just wondered if any one else has the same issue, and any suggestions as to how I can fix this.
    Thanks in Advance

    Reboot.
    Restore (from backup)
    Restore (as new)
    Test after each step. If one of them doesn't fix the problem, make an appointment at the genius bar.

  • HT201210 Ipod told me to connect to itunes because it was disabled. Now it's telling me to put in the passcode before I can use it with iTunes. I just want to restore my ipod. I have also tried recovery mode.

    I forgot my password to my ipod touch and locked it out. It told me to connect to iTunes and I did. I put it in recoery mode and started the 5 hour download of the restoring process. I tried it many times it always ends up stopping and an error occurs. Now iTunes is telling me I have to put in my password for my ipod before iTunes can use it and recognize it. But my ipod is still telling me to connect it to iTunes and I just want to restore my ipod.

    Try Recovery Mode a few more times.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • I have attempted to download ML but it does not install. The App store confirms I have paid for it, and while I have clicked yes to redownload, I am unable to find the file and it has not loaded automatically. Any help

    I have been asked several times if I want to redownload ML and answered yes, but nothing appears to happen and nothing installs. Somewhat surprisingly my internet service provider howevere has infrmed me I have exceeded my download limt today ( which suggests I have downloaded multiple copies of ML file, but I cannot find any evidence on my hard drive of where it has gone. Help appreciated.
    I am attempting to install ML on a 2009 Macbook pro, core2 duo, with 8mb RAM. I am currently running Lion 10.7.5.

    Thanks
    Problem resolved itself. Turned out that I had ben unable to contact the App store to confirm purchase. Once this resolved itself program downloaded properly and installation went without a hitch.
    Thanks again

Maybe you are looking for

  • Can't download apps on my new iPad mini,

    I get the message fail; try again later. Yes I have restarted, log in and out, have also talked to the support team all day - do you have any advice? This is really frustrating..

  • How to default Sysdate in Advance table region on clicking Add Another Row

    Hi, Can any one please help me how to default Sysdate (MessageTextInput column) in Advance table region on clicking Add Another Row. Thanks, Mohan

  • Photos on Hard drive

    I imported about 1000 photos on my macbook pro and when i look at my all images folder it shows duplicates of all pictures and i have over 6000 photos in the folder. What can be done to clear up hard drive space on my computer.

  • Print 3rd Party  Check using F110 Transaction

    Hi Folks I am working on US Payroll. I am executing the following programs. 1)RPCALCU0 to calculate payroll 2)Posting to Accounting 3)Third Party Posting Everything is working fine. Now i want to transaction code F110(Print 3rd Party check) to do che

  • Can anyone let me know how to do MCSI configuration?

    Hi all, Can anyone let  me know how to configure MCSI reports ? is there any links in sap nor docs about it ? Thanks Pooja