HT1146 How do I block sender and add to a blocked list in mail

Does anyone know how I keep control of my emails by using a block sender list so that I dont recieve emails from the same people. It is very frustrating when trying to make a living and valuable time is wasted in deleting the same spam.
I am using Apple program Mail version 5.2. Is there a better way?

Maybe you could set a rule in Mail's Preferences to delete messages from any unwanted sender:
Message was edited by: Pierre L.

Similar Messages

How do I block unsolicited e-mail(s) from unsolicited senders? Why isn't there an auto option that simply pops up and asks if you wish to block this sender from future e-mails? I am so tired of my e-mail address being sucked out of a friends address book,

How do I block unsolicited e-mails from the sites that have stolen my e-mail address from a friends address book, and send me non-stop horrid e-mails. Why is there no pop-up to ask if "want sender blocked", to easily solve this problem? Seems like it would be such an easy solution to what must be a universal problem with these e-mail pirates.

It is frontiernet.com that would need to block the emails.
You can setup a Mail "Rule" to send email you do not want into the trash, or a spam folder, etc...
In fact, there is a Mail -> Message -> Mark -> as Junk Mail, which will train Mail to reconize junk mail and start to automatically move it to a junk mail folder.
You can put this option on the Mail toolbar via Mail -> View -> Customize Toolbar, and drag the "Junk" icon to your Mail Toolbar.
But of course Junk takes training. You can create a Rule to trash the emails you do not want right away via Mail -> Message -> Add Rule, or Mail -> Preferneces -> Rules

Outlook Integration Tool - 'Send and Add to CRM' button missing

Hey Folks,
We have an interesting issue with the Outlook 2003 - SP3. On some of our machines the button 'Send and Add to CRM' does not appear with you hit 'New Email'. The tool is installed and the 'Add to CRM' button is there as expected.
If we install the tool (downloaded from an R16 environment) is still does not appear? Any ideas? Seems strange that some machines with the same version of Outlook have it and others don't?
Thanks
Oli @ Innoveer

I would also check to see if the OEI Add-In is present and selected within Outlook. You may need to reselect it. If it is already selected you may need to manually register (they need to be present) the OEI DLL Files:
regsvr32 "C:\Program Files\Siebel CRM OnDemand\Siebel OEI OnDemand\SiebelOnDemand.dll"
regsvr32 "C:\Program Files\Siebel CRM OnDemand\Siebel OEI OnDemand\SiebelOnDemandEmail.dll"

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line ?

How can i launch firefox AND adds-on (web of trust, http header with options for exemple) in commande line, on windows ?
firefoxe... -option? <addon name>?....?

Does opening this page help: <b>about:addons</b>
*https://developer.mozilla.org/en/Command_Line_Options

TS3899 How can I block an e-mail address on iPhone 5s? My ISP is unable to help. I can block via Outlook on my laptop, but they still come through on my iPhone

How can I block an e-mail address from sending me spam on my iPhone 5s? My ISP is unable to help. I can block on my laptop via Outlook, but they still come through on my iPhone 5s. Thank you very much.

You can "Move to Junk" and it should start doing it automatically after a few times:
http://blog.mailup.com/2013/09/mail-app-in-ios-7-our-first-tests/

How can I block spam e-mail when the "from address" keeps changing?

How can I block a spam mail sender when that spamer uses a different e-mail address everytime! I have set up a rule with the spamers name (which does not change) and setting the rule to "is equal to" but it is not working.

deckersmom
Verizon can't fix it and yahoo can't change your Samsung application function.
Just use the free Yahoo app.
i Have a yahoo and Gmail and use separate apps for this reason.

How to temporary block list of web pages?

Hi While working I need access to web pages (I am developing web applications) but same time often I got distracted and spend my time reading interesting articles on web instead doing my job. I was using LeechBlock addon for Firefox, but now I migrated to chrome. So my question is:
Is there simple way how to temporary block list of web pages for all browsers?
It is OK to block http/https access only, but no problem to block all traffic from/to this sites. I need to by able to easily start/stop this block.

No. Each domain has (or has not) its own IP address. The IP address of a parent domain has no influence on the IP address of subdomains.
If you want to be able to use willcard, the best way is probably to base the filtering on HTTP level traffic.
That is directly in the client (firefox/chrome extensions)
Or, using an http proxy (squid).
Or, may be, using iptables with rules that match the URL.
eg
sudo iptables -A OUTPUT -p tcp --dport 80 -m string --string "google.com" --algo kmp -j DROP
will block outgoing traffic matching "google.com". You can of course tune better rules.
sudo iptables -F OUTPUT will flush all rules.
You can then add many "iptables -A OUTPUT" lines in a script, and associate a key shortcut to this script...
Well, an extension to the browser is probably preferable. I give this solution only for the fun

How can I block all other mail account just to only use the exchange mailbox of our company? This is to prevent the user to setup his on company iPhone.

How can I block all other mail account just to only use the exchange mailbox of our company? This is to prevent the user to setup his on company iPhone.

I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!!

How to find gr details and invoice status for particular list of purchase

Hi,
how to find gr details and invoice status for particular list of purchase orders.
is there any t.code/report for it??

Hi,
You use t.code:ME2Nand enter PO number,tn Execute.Now you will have PO details .Now in item details get GR details and Invoice details in purchase order history TAB.
In t.code:MIR5, you can see blocked invoice by selection.
Regards,
Biju K

How can i block email in mail

how can i block email in Mail? just marking it junk only makes it show up in the future as junk

One thought, your ISP likely has a very good and highly configurable Spam filter. If you go through their webmail interface you might find a huge number of options that may do as you require. This aasumes you use your ISPs mail service.
If not try the webmail interface for the Mail provider you use.

How do I go back and add a new e-mail address to my Envy printer

I wanted my son to be able to send pics to my printer. I added my e-mail but can't find how to go back and add anyone else.
This question was solved.
View Solution.

Hi,
Please
(a) Logon to your HP Connected account,
(b) Click Devices tab,
(c) Click your printer,
(d) Click Manage Allowed Senders
You can add more email address(es) from there.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to create a group and add class instances to that group using VSAE

how can i create a group in VSAE and add the objects to the group that too instances of a class.
should i use the ID of the object or some other rule to add members to that group
Thanks & Regards, Suresh Gaddam

Hi,
The below links should be helpful for you to create group in VSAE:
Computer and Instance Group Fragments in VSAE
http://blog.scomskills.com/create-a-computer-or-instance-group/
Create a Group of Health Service Watcher Objects Using VSAE
http://blog.scomskills.com/create-a-group-of-health-service-watcher-objects-using-vsae/
SCOM VSAE – Custom Dynamic Computer Groups Based On Server Registry Keys
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to create a control and add it to a page layput

I am reading the following link :-
http://www.itidea.nl/index.php/what-about-you-must-fill-out-all-required-properties-before-completing-this-action-when-publishing-a-page/
which says that i need to create a control and add it to a page layout. but can anyone help me in understanding how i can create a user control and add them to page layout ?
Thanks

> First problem i could not find a User Control (Farm Solution only) under the Office/SharePoint section
if you mean New item in Visual Studio, then check it under general Web category. User controls are basic ASP.Net functionalities, not Sharepoint-specific. If it is not there, you may use the following trick:
1. Create new project in other VS instance using "ASP.Net Empty Web Application" template
2. Add new user control there (in this project type it should exist for sure under Web category. Called "Web User Control")
3. Copy all user control's files to the folder of your Sharepoint project (ascx, ascx.cs, ascx.designer.cs)
4. In VS instance with Sharepoint project add existing items: all copied user control files. They should be grouped under ascx file automatically after that
> The type or namespace name 'TaxonomyFieldControl' could not be found (are you missing a using directive or an assembly reference?)"
you need to add reference to Microsoft.SharePoint.Taxonomy.dll assembly, which is located in the GAC (assume that you have installed Sharepoint on your dev env)
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com
thanks a lot for your help. so can i do the following steps:-
I follow these steps to deploy a user control.
using Visual Studio 2012 , i added a new Farm solution.
then inside the farm solution i added a new User Control(Farm Solution Only).
3. inside the user control i entered the following code:-
using Microsoft.SharePoint;
using Microsoft.SharePoint.Taxonomy;
using Microsoft.SharePoint.WebControls;
using System;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
namespace WikiPopUp.ControlTemplates.WikiPopUp
[ToolboxData("<{0}:CustomValidationRequiredFieldsOnPage runat=server></{0}:CustomValidationRequiredFieldsOnPage>")]
public class CustomValidationRequiredFieldsOnPage : WebControl
protected override void CreateChildControls()
base.CreateChildControls();
if (SPContext.Current.FormContext.FormMode == SPControlMode.Edit)
bool arethere = AreThereAnyMissingRequiredFieldsOnPage();
if (arethere)
//SPPageStateControl:
//Provides an ASP.NET control that handles the Ribbon buttons controlling the state of a Microsoft SharePoint Server wiki or publishing page,
//such as the CheckInCheckOutButton or the PublishingButton.
SPPageStateControl baseParentStateControl = Page.Items[typeof(SPPageStateControl)] as SPPageStateControl;
//Publish button: SPListItem MissingRequiredFields checks this.FieldHasValue(link.Name, field);
//the field is empty (which is right) when the page is first created (MMD field is never filled in)
//when the field was once filled, saved and emptied the field in sp code still has the previous value and the check MissingRequiredFields succeeds
//after succeeding this check the page is validated (this.Page.Validate()) and this one fails which results SP validating the page as the Save button does
if (baseParentStateControl.HasError)
//this overwrites the previous PageErrorState
//and validates the page
//no popup anymore and status updates in yellow area
baseParentStateControl.EnsureItemSavedIfEditMode(false);
else
//there are missing fields at this listitem, but they're not on the page
//do nothing here, because the SerializedErrorState contains the navigate url to the Edit Properties page
//and a message pops up
/// <summary>
/// Check if required fields are missing which are present at the page
/// </summary>
/// <returns></returns>
private static bool AreThereAnyMissingRequiredFieldsOnPage()
foreach (Control control in SPContext.Current.FormContext.FieldControlCollection)
//get the control type
string type = control.GetType().Name;
FieldTypes controlType = (FieldTypes)Enum.Parse(typeof(FieldTypes), type);
switch (controlType)
case FieldTypes.TaxonomyFieldControl:
TaxonomyFieldControl tfc = control as TaxonomyFieldControl;
if (!tfc.IsValid)
return true;
break;
default:
break;
return false;
enum FieldTypes
DateTimeField, FieldValue, TextField, RichImageField, NoteField, RichHtmlField, PublishingScheduleFieldControl, TaxonomyFieldControl, BooleanField, ComputedField
4. i add a reference for the Sharepoint.taxnomy
5. then i deploy the solution to my site collection. and now i can see the new solution inside the farm solution under central administration.
but not sure if these are all the required steps to register the user control or still i need to do extra steps ?

How to create a package and add a file?

Hi all,
I am new to Java and very much much confussed with how to create a package and then include some files any help will be very thankfull.
Thanks for your help
kka.

Steps for creating a package in java are as follows:
Choose a base directory for your classes. For example, you might choose c:\java\packages. Type the following command:
set CLASSPATH=%CLASSPATH%;c:\java\packages
Create subdirectories for each chapter or section, if you don't already have them.
For each of the classes in the subdirectories, add the following line to the very top of each file:
package directory-name;
where directory-name is the name of the subdirectory the class file is located in.
In other directories you may have class files that need to access one of the classes in another directory (package). To do this, write one of the following at the top of the class that needs the other class:
import subdir.*;
or
import subdir.classname;
Use the class by name in the new class file.
Note that you can create sub-packages by creating subdirectories of the original subdirectories, and inserting package statements at the top of the java files in those directories.
Hope this helps!

Easy Question How to create Basic Groups and add respective Users

Please help. I need to know how to create a basic group and later add users to the group. The group name would be callled Hardware and I will add johnsmith and janedoe to the group. Should I concern myself with the group id for whatever reason? I think the command is somthing like groupadd. Do I do somthing like:
# groupadd Hardware
# useradd -G Hardware johnsmith
# useradd -G Hardware janedoe
I'm using Solaris 10 if that helps.
A million thanks I very New2Solaris,
Johnny Mac

Ok here is what I found on the net:
change a user's group information change a user's primary group membership:
usermod -g Hardware johnsmith
usermod -g Hardware janedoe
I forgot to mention that these are existing accounts (sorry)
In order to change user's supplemental group membership:
usermod -G Hardware johnsmith
usermod -G Hardware janedoe
is the supplemental group simply adding them to another group and not changing there primary group, which by default I think is staff. I would like to keep them in staff and add them to another group, in this case Hardware.
Anyones thougths?

How do setup multiple send and receive domain on single virtual ironport?

HI all
how do i setup multiple send and receive domain on single virtual ironport?
Daemien

Please use the admin guide to assist you for setup/configuration:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-0/user_guide/ESA_8-0-1_User_Guide.pdf
On the VESA - the Recipient Access Table (RAT) will control which domains your appliance accepts for.
AsyncOS uses a Recipient Access Table (RAT) for each public listener to manage accept and reject actions for recipient addresses. Recipent addresses include these:
•Domains
•Email addresses
•Groups of email addresses
This is covered in detail in the "Overview of Accepting or Rejecting Connections Based on the Recipient’s Address" section.
Please see the "Configuring the Gateway to Receive Email" section for configuration of appliance for domains.
Please see the "Defining Which Hosts Are Allowed to Connect Using the Host Access Table (HAT)" section for configuration of appliance for sending.
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

HT1146 How do I block sender and add to a blocked list in mail

Similar Messages

Maybe you are looking for