HT1146 i work on a file an want to send it to other mail recipient , but , this service is disabled

Assalamalaikum
i work on file and want to send it to others by opening file menue and send file , but it is disable , i dont know how i can do it
please help
regards

Dear Klaus 1
Assalamalaikum
thanks , i will try this
Assalamalaikum

Similar Messages

I have a dll file, i want to send messages from this to the device ,how can i do it in labview

Hi,
I am a new user of labview.
I got Vector Card, DUT, DC Power supply and .dll file. Hoe can i connect dll file and hoe to senf the information to the device,
i want to send/receive a message to that device . and measure temperature , humidity of the device. is any one can help?
i have a .dll file, i want to send messages from this file to the testing device ,how can i do it in labview?

Dear Sandy,
How are your DUT, Vector Card and your PC connected?
What vector card is this?
There are a huge amount of Knowledge base articles that you can access from www.ni.com. Simply go to the website and do a search on dll, etc.
There are also a lot of example problems shipped with LabVIEW that will be very helpful for you to learn from and to modify to meet your needs. Go to File»Find Example ....
There are LabVIEW classes taught locally as well that are very helpful. If you're interested I can arrange for you to receive an email with info about it.
Sincerely,
Sammy Z.

I was using iphone4 in england then in pakistan and now in south korea.....but here the sim is not working.....shopkeepers said that it is not factory unlock. but this set is factory unlocked. kindly inform me what to do now to activate the korean sim hre

i was using iphone4 in england then in pakistan and now the same set in south korea.....but here the sim is not working.....shopkeepers said that it is not factory unlock. but this set is factory unlocked. kindly inform me what to do now to activate the korean sim here.

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

HT3412 I want to send a Photo book to Belgium but I can't change the Country (now is Italy) in the shipping contacts but only the address (name, street, city) and there is Italy fix. How can I do ?

I want to send a Photo book to Belgium but I can't change the Country (now is Italy) in the shipping contacts but only the address (name, street, city) and there is Italy fix. How can I do ? Can I send from my country a photobook in another country?

You can change the Print Store location from iTaly to Belium in iPhoto's Advanced preference pane:
Then try to order. HOWEVER, you still may not be able to order. Over here in the States the shipping address must be in the same country as the billing address of the credit card used. It may be the same way over in Europe.
Give it a try and see. Let us know how you fare.
OT

I have an iPhone 3G. I want to be able to upgrade to IOS5 but this not possible now. Will this be possible in the near future?

I have an iPhone 3G. I want to be able to upgrade to IOS5 but this not possible now. Will this be possible in the near future?

No. The iPhone 3G is not physically capable of running anything higher than 4.2.1. It was discontinued 3 years ago.

When ever I leave a site a drop down box appears " Are you sure you want to send form again?" " To re-open this page Safari must resend a form, this may sesult in duplicate purchases, comments, or other actions". It does it twice every time? *** is this?

When ever I leave a internet site an Apple drop down box appears that says,
" Are you sure you want to send form again?", " To Re-open this page Safari must resend a form. "This action might result in duplicate purchases, comments, or other actions".
The box has two options,... "Send", or " Don't send",...
I always hit the don't send button.
It always drops down twice now when it used to only drop down once.
*** is going on with that?

Zoomantics wrote:
If anyone has a way of stopping Safari from doing this I'd appreciate the "how to".
I am on a website that has phpbb installed and when I do a search for new posts it shows them to me.
When I click on a post that I wish to read it shows me that post but if I hit back the server is set up to not allow multiple searches within a short time and the page returns "you cannot submit another search in such a short time".
If I understand what you're describing, that's a function of the phpbb forum, not something Safari is doing or can change.
A suggestion: Instead of just clicking on the posts you want to read, I would Command-click to open them in new tabs. Your page of search results will remain open in the first tab, so when you're finished reading the posts, you can close their tabs and return to your list of search results.

IMessage works fine for me and my friend when talking with other Apple guys but doesn't work when we want to chat with each other

Hello. Both me and my friend has got an iPhone. We both have the newest version of iOS7. We both have iMessage turned on and it works for both of us while we want to chat with other iPhone/iPad/iPod friends. But... when we want to send each other an iMessage... it doesn't work. Let's say my friend's contact name is "D" so i go to Messages -> New Message and in the recipient field i write D. I can choose her number and if it was iMessage "D" would obviously turn in blue like it does. But no, it turnes green and forces me to send normal SMS as if she didn't have an Apple device. Please help, klejbroda.

Make sure the send address you are using for the friend (and vice versa) are actually one of those you have set for iMessage.

AdBlockPlus is preventing me from attaching photos to emails I want to send via gmail - How do I correct this?

''locking as a duplicate - https://support.mozilla.com/en-US/questions/877475''
Quite some time ago I switched to Mozilla Firefox, and installed AdBlocker. Have had NO ads since then and have been very happy with it. Ever since I've had AdBlocker, when I go to attach a file to an email I'm about to send in gmail, I see a little word "Block" pop up over "Attach a file". I just always ignored it. Now, however, I find I am unable to attach photos I want to send. When I click on that little word "Block" I get a whole menu that I don't really understand titled Add AdBlock Filter Rule. It shows this in the "New Filter" field at top: "||mail.google.com/mail/uploader/*. Under that a "Blocking Filter" radio button is selected, and under, under "Look for "Pattern", I see the item "mail.google.com/mail/uploader/*" is selected. At the bottom of the screen is a radio button "Custom" that has https://mail.google.com/mail/uploader/uploaderapi2.swf after it, but that button is not selected. I just removed all custom filters in an attempt to get rid of whatever is disallowing me to attach photos. But that didn't work. Any ideas? I'm lost

BTW, I should have said AdBlockerPlus above - I have ABP, not just AB.

When I type in the email address I want to send an email to, mail suggests email addresses i never use

I am using Apple's Mail application on my MacBook Pro for 3 emails. One personal, one for my work place and one for my university email address. From the university I receive lots of emails which isn't sent only for me, but every student on my course, so I am not the only receiver.
When I am sending an email, from any of my email addresses and I type in whom I want to send it to, it shows a bunch of email addresses that I have never sent an email to. They are all university email addresses and I want to get rid of them, but they are not in my address book and I have no clue how to delete them / where to find them.
For example: I wanted to send an email from my work place email to James Fox. He's email is [email protected] (just an example). When I start to type in James.f, about 100 email addresses pop up, but none of them is the one I need and I will never need those and I CANT GET RID OF THEM.
Please help me, how to get rid of all these unwan

How is the university account added to your system? (You should be able to find it in either System Preferences - Internet Accounts, or Mail - Preferences). Is it an Exchange account, perhaps? I wonder if you're seeing a centralized contact group that can't be controlled from your computer (but you may be able to turn it off completely).
Matt

How do you make imessage work? The icon is there. You can type in the recipient but are not allowed to hit the send button

How do you make imessage work? We upgraded to verision5. The icon is there. You can type the message but the send button is not available.

There is some instability in iMessage. It is a versatile and confusing app even though there are so few options in its use.
I had issues trying to get iMessage work on both my iPads and my iPhone.
ON the iPhone, turning off WiFi service and then trying iMessage fixed the problem.
On the iPad 2, same thing. Turning off WiFi service fixed it.
On the iPad 1, I took a suggestion from zoomzoom and changed the WiFi network configuration on the iPad to use 8.8.8.8 as a DNS server and then use iMessage. That fixed it. Now I put the DNS back to default and it still works.
I suspect the iPod Touch will have the same fix as the iPad.
If you have a WiFi and 3G iPad or iPhone, try turing off WiFi and see if that fixes it.
Why? (beware, some of this is guesswork)
iMessage can talk SMS to cellphones and smartphones (that are using the cell-network). It can also talk Apple iMessage format to iPhones and iPads whether they are on cell-network or on WiFi. If you are talking to an SMS cellphone, iMessage figures that out and blindly sends your message. If you are talking to a iOS5 device, iMessage figures that out too, checks to see that they are on-line, and then does something different if they are or are not on-line. If you type in an email address, and not a phone number, I think iMessage attempts to see if the email address is registered with Apple (or iCloud or whatever) and if it is not, it does something to let you know, possibly by making the Send button not light up.
In order to register iMessage and an email, you have to let the iOS device see whatever service it is that iMessage uses. That is where the problem happenes. zoomzoom suggested manually setting the WiFi DNS to google's 8.8.8.8 IP address, then run IMessage, and that seemed to fix the problem. Setting the iOS device to use 3G-only (by turning off WiFi) also fixed the problem. I suspect going down to StarBucks or McDonalds and using their WiFi would also fix the problem. Once the problem is fixed, it doesn't seem to come back so I can't test these 'fixes'.
To change the DNS on your iPad find your WiFi networks configuration, click on the blue arrow, touch DNS, backspace over the number that is shown, type in 8.8.8.8 Then click on the WiFiNetworks button at the top of the screen. Now go run iMessage. After that, you can delete the DNS entry again and leave it blank. Your iPad will fill it in from the WiFi router when it needs it.

Can I password protect a file I want to send in the pdf pack?

I just subscribed to the pdf pack. I want to take pictures and send them as a protected file. How/can I do that with the subscription I just purchased?

Hi ericg77,
Please see my answer in your similar post: Protected files
Best,
Sara

I have 2 files I want to consolidate into 1 how can I do this?

Everytime I try to do it the program freezes up.
Attachments:
Tigear_RPM.vi ‏119 KB
Tigear_Test_Setup_New.vi ‏596 KB

Which two files are you trying to combine? The two VIs? or two of the datafiles you're generating. In any case, I was able to install the counter vi into the other one without any lockup.
However there are some significant issues in you code that if you are interested I can help you work through. Suffice it to say that you are going to a lot more trouble than needed to generate your datafile, and there are some major problems in terms of code efficiency and potential race conditions.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Opening file present in treeview by clicking on it within a table? I had created a table with a row and two columns. in one column i had dislayed treeview and want that if i click on the file in treeview it gets opened in other column. Can this happen?

I also got a code in some website related to my problem but there are errors in this code that i am not able to understand can you correct those errors:
using System;
using System.IO;
using System.Collections;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Web;
using System.Web.SessionState;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.HtmlControls;
using Microsoft.Web.UI.WebControls;
namespace shark.TreeView
/// <summary>
/// Summary description for DocTree.
/// </summary>
public class DocTree : System.Web.UI.Page
protected Microsoft.Web.UI.WebControls.TreeView TreeCtrl;
public DocTree()
Page.Init += new System.EventHandler(Page_Init);
private void Page_Load(object sender, System.EventArgs e)
if ( ! this.IsPostBack )
// add tree node "type" for folders and files
string imgurl = "/shark/webctrl_client/1_0/Images/";
TreeNodeType type;
type = new TreeNodeType();
type.Type = "folder";
type.ImageUrl = imgurl + "folder.gif";
type.ExpandedImageUrl = imgurl + "folderopen.gif";
TreeCtrl.TreeNodeTypes.Add( type );
type = new TreeNodeType();
type.Type = "file";
type.ImageUrl = imgurl + "html.gif";
TreeCtrl.TreeNodeTypes.Add( type );
// start the recursively load from our application root path
// (we add the trailing "/" for a little substring trimming below)
GetFolders( MapPath( "~/./" ), TreeCtrl.Nodes );
// expand 3 levels of the tree
TreeCtrl.ExpandLevel = 3;
private void Page_Init(object sender, EventArgs e)
InitializeComponent();
// recursive method to load all folders and files into tree
private void GetFolders( string path, TreeNodeCollection nodes )
// add nodes for all directories (folders)
string[] dirs = Directory.GetDirectories( path );
foreach( string p in dirs )
string dp = p.Substring( path.Length );
if ( dp.StartsWith( "_v" ) )
continue; // ignore frontpage (Vermeer Technology) folders
nodes.Add( Node( "", p.Substring( path.Length ), "folder" ) );
// add nodes for all files in this directory (folder)
string[] files = Directory.GetFiles( path, "*.aspx" );
foreach( string p in files )
nodes.Add( Node( p, p.Substring( path.Length ), "file" ) );
// add all subdirectories for each directory (recursive)
for( int i = 0; i < nodes.Count; i++ )
if ( nodes[ i ].Type == "folder" )
GetFolders( dirs[ i ] + "\\", nodes[i ].Nodes );
// create a TreeNode from the specified path, text and type
private TreeNode Node( string path, string text, string type )
TreeNode n = new TreeNode();
n.Type = type;
n.Text = text;
if ( type == "file" )
// strip off the physical application root portion of path
string nav = "/" + path.Substring( MapPath( "/" ).Length );
nav.Replace( '\\', '/' );
n.NavigateUrl = nav;
// set target if using FRAME/IFRAME
n.Target="doc";
return n;
#region Web Form Designer generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
this.Load += new System.EventHandler(this.Page_Load);
#endregion
and the design that i got on website for the code that i displayed just above it is
<%@ Register TagPrefix="iewc" Namespace="Microsoft.Web.UI.WebControls" Assembly="Microsoft.Web.UI.WebControls" %>
<%@ Page language="c#" Codebehind="DocTree.aspx.cs" AutoEventWireup="false" Inherits="shark.TreeView.DocTree" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" >
<HTML>
<HEAD>
<meta content="Microsoft Visual Studio 7.0" name="GENERATOR">
<meta content="C#" name="CODE_LANGUAGE">
<meta content="JavaScript (ECMAScript)" name="vs_defaultClientScript">
<meta content="http://schemas.microsoft.com/intellisense/ie5" name="vs_targetSchema">
</HEAD>
<body>
<form id="DocTree" method="post" runat="server">
<table height="100%" cellSpacing="0" cellPadding="8" border="0">
<tr height="100%">
<td vAlign="top">
<iewc:treeview id="TreeCtrl" runat="server" SystemImagesPath="/shark/webctrl_client/1_0/treeimages/">
</iewc:treeview>
</td>
<td vAlign="top" width="100%" height="100%">
Click on any *.aspx page in the tree and it should load here <iframe id="doc" name="doc" frameBorder="yes" width="100%" scrolling="auto" height="100%">
</iframe>
</td>
</tr>
</table>
</form>
</body>
</HTML>
This is my code for viewing treeview but it is not expanding plz help me in this also
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Data;
using System.IO;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.HtmlControls;
using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;
using System.Media;
using System.Drawing;
using System.Drawing.Imaging;
public partial class _Default : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
if (Page.IsPostBack == false)
System.IO.DirectoryInfo RootDir = new System.IO.DirectoryInfo(Server.MapPath("~/Files"));
// output the directory into a node
TreeNode RootNode = OutputDirectory(RootDir, null);
// add the output to the tree
MyTree.Nodes.Add(RootNode);
TreeNode OutputDirectory(System.IO.DirectoryInfo directory, TreeNode parentNode)
// validate param
if (directory == null) return null;
// create a node for this directory
TreeNode DirNode = new TreeNode(directory.Name);
// get subdirectories of the current directory
System.IO.DirectoryInfo[] SubDirectories = directory.GetDirectories();
// OutputDirectory(SubDirectories[0], "Directories");
// output each subdirectory
for (int DirectoryCount = 0; DirectoryCount < SubDirectories.Length; DirectoryCount++)
OutputDirectory(SubDirectories[DirectoryCount], DirNode);
// output the current directories file
System.IO.FileInfo[] Files = directory.GetFiles();
for (int FileCount = 0; FileCount < Files.Length; FileCount++)
DirNode.ChildNodes.Add(new TreeNode(Files[FileCount].Name));
} // if the parent node is null, return this node
// otherwise add this node to the parent and return the parent
if (parentNode == null)
return DirNode;
else
parentNode.ChildNodes.Add(DirNode);
return parentNode;
This is my design
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
<style type="text/css">
.auto-style2
width: 412px;
.auto-style3
width: 174px;
.auto-style4
width: 743px;
.auto-style5
width: 506px;
height: 226px;
</style>
</head>
<body>
<form id="form1" method="post" runat="server">
<table align:"center" class="auto-style4" border="1" style="table-layout: fixed; border-spacing: 1px">
<tr>
<td class="auto-style3">
<br />
<br />
<br />
<br />
</td>
<td class="auto-style2">
<br />
<br />
<br />
<br />
</td>
</tr>
<tr>
<td class="auto-style3" valign="top">
<asp:TreeView Id="MyTree" PathSeparator = "|" ExpandDepth="0" runat="server" ImageSet="Arrows" AutoGenerateDataBindings="False">
<SelectedNodeStyle Font-Underline="True" HorizontalPadding="0px" VerticalPadding="0px" ForeColor="#5555DD"></SelectedNodeStyle>
<NodeStyle VerticalPadding="0px" Font-Names="Tahoma" Font-Size="10pt" HorizontalPadding="5px" ForeColor="#000000" NodeSpacing="0px"></NodeStyle>
<ParentNodeStyle Font-Bold="False" />
<HoverNodeStyle Font-Underline="True" ForeColor="#5555DD"></HoverNodeStyle>
</asp:TreeView>
</td>
<td class="auto-style2">
<base target="_blank" /> <iframe frameborder="0" scrolling="yes" marginheight="0" marginwidth="0"
src="" class="auto-style5"></iframe>
</td>
</tr>
</table>
</form>
</body>
</html>

Hi meghage,
From your code, it is a WebForm project.
This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
You can consider posting it in asp.net forum for supports . Thanks.
ASP.NET: http://forums.asp.net
Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am working on a book and want to send it to someone to help edit, how can I do this

I am working on a photo book in iPhoto and would like to send it to another member of the family for editing before I publish. How can I do this?

Not really possible in general
a book is simply entries in the iPhoto database and to transfer it you must transfer the entire iPhoto database
You could preview it and send the resulting PDF but typically that is VERY large
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Adobe Reader stops me from opening PDF files I want to read. I trashed Adobe Reader but I still can't get into some PDF's?

I can't understand when I try to open PDFs on a website, and even after trashing Adobe Reader, I am not allowed to read PDFs on web sites?

Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.

HT1146 i work on a file an want to send it to other mail recipient , but , this service is disabled

Similar Messages

Maybe you are looking for