HT1174 my ipod wont work and wont turn on or connect to computer its just like the whole device has been totally erased what do i do?
okay so yesterday i tried doing something to my ipod now it wont turn on or connect to the computer and its like the whole software on it is totally erased and its 4 years old and has one chip in it and a broken home button what can i do? or how can i fix this? is it cheaper to just go buy a brand new ipod?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I bought my ipod touch 4g 16gb last month, it came with ios 6..now that the ios 7 has been announced, i wanted to know if i can install it on my ipod
iOS 7 will be compatible with:
iPhone 4
iPhone 4S
iPhone 5
iPod touch 5th generation 16GB
iPod touch 5th generation 32GB/64GB
iPad 2
iPad with Retina Display
iPad mini -
i have an iod touch and aparently the software driver has been removed and i had it restored to factory settings as i bought it from someone,what does this mean and how do i solve the problem
Just what error message are you getting?
Are you trying to redownload them directly to the iPod?
If you are getting an error message that included Open GL 2 or similar that means that the app requires that but only the 3G and later iPods support that. -
I disconnected My Passport by mistake, and now Time Machine can not recognise it. It no longer appears in the My Devices section of Finder. What do I do?
Hello rjhc49,
Thank you for the details of the issue you are experiencing with your external hard drive. I found an article with steps you can take when an external device is not being recognized.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Ipod stopped working and wont turn on
i was using my ipod and it stopped working and the screen turned off and now it wont turn on. the computer wont even reconize it when i plug it in.
Hello, makaylla.
Thank you for visiting Apple Support Communities.
I am not sure what generation iPod nano you have so I will include a couple troubleshooting articles that may help with this issue.
iPod won't turn on
http://support.apple.com/kb/ts1383
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Cheers,
Jason H. -
Ipod stoped working and wont cut on
i charged my ipod over night after i just disconnected it from my xbox 360 and i had been doing thsi for a while well i was about to eave and decided ill take it with me i found out over night it didnt charge and now it just cuts on says www.apple/support/.com and cuts off then when i plug it in to the usb intead of wall it shows the battery but wont charge and still starts up and shuts down what do i do
http://www.apple.com/support/ipodclassic/
-
I've recently tried reseting the whole Ipod and it came up with an on-screen message saying ''are you sure you want to reset the device? it will take up to an hour and no music or pictures will be restored'' so i clicked ''Yes, Rest'' (or what ever it said). I am now sitting here 24 hours later with an ipod that won't turn on.
i have tried holding the 'power' button down along with the 'home' button for 30 seconds etc.. and nothing is working; it won't show up on Itunes niether the computer. why won't it turn on?If you did not try any items listed here, try them
iOS: Not responding or does not turn on
I still problem make an appointment at the Genius Bar of an Apple store. -
Bridge wont work and wont uninstall
Win7, Bridge cs5
Maybe if i reinstall Bridge it will work. But I use Win7 Uninstall Program and i see Photoshop CS2, Photoshop CS4, and Photoshop CS5. Non of which will uninstall. Everytime a message comes up telling me to close Bridge CS5 (Bridge CS5.exe). But Bridge isn't open. I restart, I dont open Bridge, and the uninstall fails again with the same notice.i looked for a contradiction and cant find it; lets just suffice it to say that i am
confused. I finally did uninstall CS5 [had to use MSCONFIG to remove its startup status so that bridge.exe wouldnt open upon startup] and i uninstalled CS4 & CS2. Reinstalled CS2 & CS5. Same problem, this problem is related to my other post, being, MY DOCUMENTS does not show in Brid
ge CS5's file tree. But it does show in Favorites. But it all shows in Bridge CS2 so i will use that. The only thing i know for certain is the problems started when i switched to Windows7 and its happening on an Acer laptop. Now i am advised to use CS4 so my file associations wont be confused. So i will reinstall it. -
please can someone help me to unistall itunes from my laptop control panel, this means it also wont let me install the latest version!
I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
Adobe flash player wont work and wont reinstall can anyone help?
my adobe flash player quit working i uninstalled it and redown loaded it. several times but i keep getting this message [ blocked plug in ] what can be done?
First update to 10.6.8.
Two bugs, one affecting Apple's Mac platform and another attacking Microsoft's Windows, exploit certain Flash player vulnerabilities to install malware onto users' systems, reports ArsTechnica. While users of other operating systems like Linux have yet to report attacks, Adobe's advisory notes the exploit affects all platforms.
Designated as CVE-2013-0634, the first vulnerability targets the Safari and Firefox Web browsers running on OS X, and is also being used as a trojan to deploy Microsoft Word documents containing malware. For Mac users, the flaw affects Adobe Flash Player version 11.5.502.146 or earlier.
On March 1 Apple again blocked Flash Player for Lion and Mountain Lion:
http://support.apple.com/kb/HT5660
The Adobe Flash patch can be found on Adobe’s website, and users can visit this page to check if their software is the most curent version.
You should uninstall any previous version first, and repair permissions after installing the new version.
If you still get a ‘plug-ins blocked’ message:
http://support.apple.com/kb/HT5271 -
I had my ipod touch and iphone synced to itunes on my PC and basically managed my photos and music, etc. from there. However recently my computer died and I am considering replacing it with an ipad eventually. Can I still add stuff onto my two devices? And if so, am I limited to apple store purchases only? Can I retain all the photos and non-apple store downloaded music that is presently on these two devices? Any guidance in this area will be very welcome!
Morning @mb,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/HT1209
Music imported from a CD or another source
iTunes cannot transfer this media back to a computer. Make sure to back up your iTunes Library, or you can use iTunes Match2.
Best of luck,
Mario -
I tried to open my Itunes toady on my home computer. It said to update the library so I did. Now it wont open or anything. Tried reinstalling everything and get the error messages posted in the title above. Please Help. I have a lot tied into Itunes. Now when I check for updates it says everything is upt to date but when I try to open it i still get these two erroe messages. MSVCR80.dll and ERROR 7 (Windows error 126)
Hello berlinfire1979,
The following article provides further information regarding this error, and steps that can help get iTunes working again.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
Cheers,
Allen -
We have tried to alter the profile to push out a different password and to push out no password, but the the new settings do not copy over to the Ipad when connected via usb cable.
Any ideas?You can try to reset and configure the iPad as a new device.
Have a look at recovery mode and DFU mode. -
My Ipod touch wont work and ive tried everything!!
Please help! My ipod touch (8gb) just stopped working one day and I think it had something to do with being Jailbroken and having less then 20% of battery, But now it wont work and ive let it charge for 2 days straight, Ive tried plugging it into the computer - Nothing, Ive tried holding down the sleep and home button - Still nothing! please help, i dont want to get a new one because this one has absolutly Everything on it.
Also, my iphone comes up with No wifi and its all grey but my bluetooth is fine...and ive restored it and everything...help on that too?Your iPod.
When you held both Sleep & Home Button, did you hold for more than 10secs until you see Apple logo?
If that still does not work
try this.....
1. Plug into a power source
2. Hold down the power button(Sleep button) for about 5 seconds
3. After 5 seconds of holding down the power button, hold down the home button while still holding down the power buttom (so now you are holding them both down) for about 5 seconds.
4. After 5 seconds of holding them both down, let go of the power button - but still keep holding down the home button - hold the home buttom alone for about 5 seconds.
You should then see the apple icon on the screen. be patient. after about 5 seconds of the apple icon on the screen, the ipod should turn on. -
my ipod 5 froze and wont work or anything and my home button doesnt work so i cant soft reset or anything does anyone know what to do about this?
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says plae the iPod in Recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Data level security for Dashboard pages.
Hi all, I have a question.I want to apply data level security to the data in Dashboard pages . Any Answers. Thanks Sunny.
-
Flashback buf free by RVWR is in top-5 wait event.
Hi Team, I am having slowness in my database. due to this i am getting some of the query getting timed out. while i view the AWR ,i am seeing the wait event-flashback buf free by RVWR. Can you please help me will it affect the database performance. a
-
Oracle standard reports (non FSG) using Report Manager
Hi, I was wondering if Oracle standard report (non FSG reports) can be run/published from Report Manager. If yes, can somebody provide me the steps to run/publish these reports? Thanks in advance. Thanks Sam
-
I made this account awhile ago, but I just foud some apps I had purchased on my computer so I downloaded them onto my iPad, but they need to be updated and it asks for my prior account information which I do not know. I tried to send a recovery email
-
How to inject external configuration into web dynpro application
Hi colleagues, I've a web dynpro application, which has some hard coded hostnames in the source code. All hard coded hostnames should be moved to some else place, either engine parameters or external configuration file. Searching over the project, ha