HT1175 We upgraded our operating system to Mountain Lion, but now our time capsule won't link up to our computer. Help

We upgraded our operating sytem to Mountain Lion and now our computer wont recognize our time capsule. Help!!

Just to be sure, we're talking about a Time Capsule -- not an AirPort Extreme connected to an external hard drive. Right?
If so, proceed as follows.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • I have updated my operating system to mountain lion and all is good except my microsoft word and excel and asking me to repurchase them. They were installed over three years ago and due to my hard drive upgrade I don't have time machine backup to revert

    I have replaced my hard drive on our 27" Imac and upgraded the op system to mountain lion. Once all done and collected from apple, i have found my word and ecel have expired and are requesting me to repurcahse the items. As they were purchased almost 4 yrs ago I have no idea where the original box or codes / product key / passwords are. What can I do to get around this problem. In addition my time machine only goes back as far as the op system upgrade.
    Regards
    Tim.

    Good news - saved you a 2 hour phone call

  • HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard).  However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore.  HELP!!

    HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard).  However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore.  HELP!!

    Can you tell us about one or more of the video files - what are they?  QuickTime?  MP4?  Something else?  How did you create the video files in the first place?
    I do a lot of video and when I upgraded to Snow Leopard I discovered that many of the QT videos that I had created previously (via iMovie & Final Cut) would not play correctly in QuickTime X - the bizarre behavior was that QT X acted as if my video files were only audio files!  I reported this to Apple at the time but never heard anything back, and there hasn't been any change in later updates to QT X.
    The solution was to (re)install QuickTime 7.  But first look in your Applications > Utilities folder.  When you upgrade from Leopard to Snow Leopard, the installer normally moves the old QT 7 program to your Utilities folder.  If it's there, try using QT 7 to play one of your video files.    If QT 7 is not there, you can download and install it from here  Make sure you are running at least OS X 10.6.3 before you install QT 7.  It's even better if you make sure you are running 10.6.8 which was the last release of Snow Leopard.

  • Want to update the operating systems to Mountain Lion version 10.8.2

    Want to update the operating systems to Mountain Lion version 10.8.2 on my Macbook6,1 from Mac OS X Version 10.6.8. Will this affect the performance of my computer in a negative way, and if the benefits outweigh it? Thanks.

    While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

  • I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

    I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

    I upgraded from the app store. It is actually quite awhile ago so I do not remember how. I think I used a thumbdrive to create some type of file. No I do not have any backups. My iLife CD is nowhere to be found because this is a very old macbook pro that I've had for a couple years.
    Thanks for taking the time to help

  • Just upgraded my MacBookPro to OSX Mountain Lion. Now unable to reinstall Capt.Installer driver for my Canon LBP3010 printer. Same installer was used in previous OS

    Just upgraded my MacBookPro to OSX Mountain Lion. Now unable to reinstall Capt.Installer driver for my Canon LBP3010 printer. Same Capt.Installer was used in previous OS.
    Got message that the software was not obtained from Apple or trusted source.
    Anyone can help solve this issue, do not wish to purcahse new printer, and Apple does not appear to be friendly to me

    Apple is still friendly, only became more protective - for your very best. Right-click on the installer, then "Open", and then you get a window offering you the option to run it. That's a ML feature. Again, for your protection.
    Independently, and as not only with Apple, a new OS X is sometimes different, and ML is that bit "pickier" with fully compatible software. So, even if your driver ran under Lion, it can be that it won't under ML. In that case please check Canon's website if they have a newer ML-compatible version, If not, also go and blame Canon. It's their responsibility to provide up-to-date drivers, not Apple's.
    Good luck.

  • I updated the operating system in my iPad, but now I can't open any apps.....they just wiggle when I try to open

    I updated the operating system in my iPad, but now I can't open apps.....they just wiggle when I try!

    Don't hold your finger down for an excess amount of time. Just quickly tap and release on the app icon.

  • Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well,

    Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well, but what can I do for QuickTime opens on .avi and doesn't convert to .mov?

    HI GalaxieMusique,
    I'm french too, but I'm going to write this post in english so that everyone may understand it
    I have the same problem in Mavericks, but I'd say, more important, with QuickLook.
    Indeed Quicklook can't read avi movies anymore. Actually it always been the case, but with Perian we were able to fix it. The problem is that Perian is no longer available for Mac OS 10.9....
    I'd assume that our only hope is Apple themselves... It would be nice from Apple to creat an add-on for quicklook to be able to preview the avi movies.
    In regards with quicktime, you can download QuickTime 7 here:
    http://www.01net.com/telecharger/windows/Multimedia/lecteurs_video_dvd/fiches/10 0.html
    and ask all the .avi movies to be played by QuickTime 7 and not QuickTime X (included into Mac OS).
    Sorry for the english, we french people can make mistakes sometimes
    If anyone has a solution for QuickLook, please do not hesitate. This topic is becoming a real mess....

  • Hi Iv'e downloaded mountain lion but now can't open mail?

    Hi Iv'e downloaded mountain lion but now can't open mail?

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • I downloaded Mountain Lion, but now I don't see all my notes that were in my mail. Where can I find them?

    i downloaded Mountain lion, but now i can't access all the info that was in my notes. Where can I locate them?

    Refer to this post and see if it helps: https://discussions.apple.com/message/19099058#19099058

  • I upgraded my Macbook Pro to Mountain Lion and now cannot get my album artwork to show?  Help!

    I upgraded my Macbook Pro to Mountain Lion and cannot get my album artwork to show.  Help!

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • I recently upgraded my Macbook Air to Mountain Lion and now I cannot seem to find my "notes", regardless of the countless answers given to people with questions similar to me.   Surely Apple wouldn't make you lose all your important information.   If some

    I recently upgraded my Macbook Air to the mighty "Mountain Lion" and now I cannot seem to find my "notes", regardless of the countless answers given to people with questions similar to me.
    Surely Apple wouldn’t make you lose all your important information-or they would be "bad apples".
    If someone has a solution, please please please help me find my lovely notes! (Step by step would be most helpful). Cyber high fives and Smiles will be rewarded graciously.

    I recently upgraded my Macbook Air to the mighty "Mountain Lion" and now I cannot seem to find my "notes", regardless of the countless answers given to people with questions similar to me.
    Surely Apple wouldn’t make you lose all your important information-or they would be "bad apples".
    If someone has a solution, please please please help me find my lovely notes! (Step by step would be most helpful). Cyber high fives and Smiles will be rewarded graciously.

  • I was installing mountain lion and now my macbook pro won't start up

    I was installing Mountain Lion and i restarted my computer and now it won't boot up.

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I just upgraded my iPhone 4s to iOS 6 but now it isn't compatible with my itunes 10.6 please help?

    I just upgraded my iPhone 4s to iOS 6 but now it isn't compatible with my itunes 10.6. I have tried to download itunes 10.7 however my macbook is only 10.5.8 so I can't. So now I can't connect my iPhone to my itunes, what should I do?

    Hi guyz just fixed mine just now, I used an app named iREB please refer to the below link. Make sure youre iphone is plugged in to your USB then launch the app as admin. As soon as the app is running go to the "Recovery Mode Loop Fixer" tab & hit the "Set Auto-Boot True (Fixes 1015 errors / Recovery Loops). It will restart your iPhone in just a moment & get you back to your homescreen.
    I hope this will help those whos undergoing this horrifying iPhone problem.
    Just additional info.
    Issue: Stucked with USB & Itunes Logo during upgrade attempt to iOS 6.0
    Iphone 4S (iOS 5.1.1.(9B206)
    32 GB
    Official Factory Unlock
    PC-Win 7 Home Premium 64bit
    iREB Download Link:
    http://www.yourtechinfo.com/2012/05/how-to-fix-recovery-mode-loop-or-itunes.html #Downloads:

  • Two operating systems with mountain lion

    Is it possible to install two operating systems on a mac running OS X Mountain Lion?
    I would like to setup Snow Leopard and keep Mountain Lion on seperate partitions.
    Can this work?

    As long as your Mac shipped with SL or less you can do it. You'll need to put SL on another drive or partition your existing hard drive. I prefer a seperate drive. Then when you need SL just boot from your SL drive.

Maybe you are looking for

  • My IPad is Disabled and can't get it on.

    My IPad is Disabled and says connect to Itunes. I don't know how to get it working again.

  • Damaged material adjustment posting

    Your help is required for the following scenario. Material received from the foreign vendor against import PO. Total qty is entered in SAP through MIGO posting with movement type 101. Partial qty damaged received which are to be settled by the insura

  • R12 Test instance available.

    hi, R12 Test instance Available Now!!! http://vis1200.solutionbeacon.net Regards, Phani.K

  • Getting lines in prints Photoshop CS6

    Hello, I am getting lines in my prints from PhotoShop CS6. My printer is the Canon MX522. Ive noticed that printing from other *dumb* programs such as Microsoft Paint the images look fine BUT with photoshop the images print ultra fast and have lines.

  • Editing Menus and Bottons in Photoshop

    I'm using the Tryout version 2.0 (my first experience with Encore). Whenever I try to edit a menu or button (Control+Shift+M), I get an error message stating that "Could not edit in Photoshop. Does not appear to be installed." I am currentlly running