HT1178 I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN o
I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
How do I rectify
Paul
you can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
But, I haven't tested this with a BT product...and I suppose anything is possible.
Still, I would be extremely surprised if this worked.
The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port.
Similar Messages
-
if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierraHey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.
-
I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?
sylviafromhanover wrote:
So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that.
Yes, that is correct.
Did you have the instructions that came with your Airport Extreme? Are you sure you have it setup properly? Here is the setup guide:
http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf
Ensure you have everything setup properly. Once you do this and if you are still having trouble, follow Star's instructions. -
I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?
You saved it after setting the Password? :
Inspector > Document > Document > Require Password to Open
I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
Peter -
Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.
This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3. -
Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek RandallI don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.
-
How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media
Hi.
You simply can't. Snow Leopard is compiled in Intel binary only.
Good Luck. -
I have not had any issue with Itunes on my PC until very recently. Every now and then my Itunes library appears on my screen? I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch? Why does this happen please as it is driving me crazy!.
What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)
-
Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.
Why is this? My husband's 4s is still on IOS7 and it still connects automatically.I do not know if this will help.
For a limited time Apple will allow you to downgrade to 7.1.2. Hurry do not wait.
See brownox second post here:
Are there known problems with hdmi screen display and iOS 8?
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/ -
I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much
Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.
-
How to purchase apps in App Store? When I am trying to buy those apps, it is asking for my card details. I have entered my debit card number and then it asked for 3 digit security code. I have entered cvv secure code but it is showing an invalid security
Debit cards are no longer accepted in the iTunes Store, it seems. The current valid payment methods are listed here:
http://support.apple.com/kb/HT5552
You can try contacting the iTunes Store and asking if there is any way to use your card, but they probably will tell you that it's not possible.
http://www.apple.com/emea/support/itunes/contact.html
Using a debit card in any online service where it stores your card is a bad idea in any case since if someone gains access to your account in the service, they can quickly drain your bank account. Credit cards limit your liability, as do prepaid iTunes cards.
Regards. -
I have a problem with my viber.It has stopped working.I tried reinstalling it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .My other applications are working fine ..other applications that require internet too are working fine.
Please get in touch with Viber's customer support.
-
I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?
I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time . -
while in email today, the computer began flashing. I had to turn off with button. When I turned it back on, I got the apple icon and the moving loading wheel. It would turn for about 60 seconds and then stop. I turned off again. I now have a black screen.
Hi wiesenruth,
If you are having issues starting up or booting your computer, you may find the following articles helpful:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Regards,
- Brenden
Maybe you are looking for
-
Can i pass parameter or global variable in view from 6i form
hi master sir can i pass parameter or global variable in view from 6i form i use view for some diff column calculation within the date then i use where date between data1 and date2 in view but view not create please give me idea how i pass external v
-
Question on spry vertical menu bar backgrounds
I have a spry vertical menu bar. The menu branches off to 3 or 4 levels in some cases. When you mouse over the menu structure the menu path that you have selected turns a different color. I acheived this by giving ul.MenuBarVertical a.MenuBarItemH
-
After upgrading MacBook Pro to OS X Yosemite, "Today" files are not displayed in Finder / Favorites / All My Files. It worked prior to the upgrade.
-
JAEHYLEE (R11i OIE) OIE Import ready 상태 status는
Purpose Expense Report가 Expense Import 수행중에 중단되었을때 Import를 하기 위해 정상 상태가 무엇인지 확인해 보고자 한다 What do the values mean in the columns SOURCE and WORKFLOW_APPROVED_FLAG in the table AP_EXPENSE_REPORT_HEADERS_ALL? Solution Soure는 'SelfService' 에 workflow_appr
-
Just bought this G5 used... a few questions.
Hi there, So I bought this G5 used a month or so ago. I have a few miscellaneous questions about it (as the subject suggests). 1. I created a new username for myself, and granted the account admin privileges. But, for some reason when I try to access