HT1192 caps lock function does not work after latest update

Hi there,
I have a Macbook 13" Early 2011 and recently after updating my operating system to Mac OS X 10.7.4, i have found that the caps lock button isn't functioning.
At present if i hold or press the button, it is failing to light up or function at all.
Is there a fix for this issue, as i have read that there was an update by Apple to stop accidental pressing of this key, however not being able to access its function at all seems to be unusual.
Your thoughts and opinions would be much appreciated,
Thanks,
Robsterhill101

My Macbook Pro Early 2011 15"  (base model) did this to me last night.
I did a PRAM Reset, the generic "Cure All Procedure" for Macs. It worked after, but I noticed that the button had to be pressed at just the right angle and with enough pressure. The light would come on and off and Caps Lock functions properly. Continued as normal.
I put the computer to sleep by simply closing the lid, and then put myself to sleep as well.
This morning, just before I came on here, my computer would NOT wake from sleep (a whole other issue). Would not wake up by pressing the power button. So I had to do a hard reset, hold the power button down, and press it again after...grrr I never feel good being forced to do this.
Anyways long story a little bit shorter, I restarted my computer and low-and-behold the Cap Lock is not working again. No Bueno, Cupertino.
No, sorry, no liquid damage on the keys, and I don't have kids, nor share my computer with anyone but myself.
Its one of the few things that bug me about this computer. The other is the issue of the computer not being able to wake from sleep. Too often.
SHOULDA BOUGHT THE APPLE CARE
Simply Because, perfect timing after the years original warranty, you will experience problems. After all, they do want you to be a repeat customer. IYKWIM

Similar Messages

  • Headset does not work after latest update...

    It is very "strange" that since the latest system update on my Z3 compact my headset is not working at all. I use my all time favourite iphone 4 headset. It worked flawlessly before the update but now if I plug it in, the phone is not recognizing it at all and the walkman still plays on the phone speakers. Before the update I could listen to music, use it for making calls and so on. Since the update, nothing is working. My headset is working fibe by the way, so it is not a hardware fault. Works like a charm with other phones, and on the top of that if I use the app Soundabout the music works with the headset but the calls are still not using my headset. Do not tell me to use the sony headset which was in the package because I hate it. Has poor audio quality, falling out of my ears constantly and the cable is everything but not flexible. So it is a shame that I need to use an app to get my headset work on my new phone...

    I understand you don't want to use the bundled headset, however for troubleshooting purposes can you please test it and let us know if it works.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Caps lock key does not work...

    my caps lock key was working perfectly up until 10-15 minutes ago.
    when i press my caps lock key, the little light on the key does not turn on and all of my letters remain in lowercase.
    i thought perhaps something was stuck underneath the key, but when i took the key off - nothing was there. i placed it back on and still the caps lock key does not work.
    does anyone have any ideas as to why the problem could be and how to fix it?

    Finally found something that worked for me. See this thread and look for the post about removing the Hitoolbox plist files.
    http://discussions.apple.com/thread.jspa?messageID=10765093&#10765093
    I removed all of them. (Had multiples) Also make sure you empty the trash afterwards.
    Then restart.
    Then I used the modifier key trick in this thread. Turned off the caps lock key. Then restart.
    Then use the modifier key trick and turn the caps lock key back on. Test to see if your lights come back on for the caps lock key.
    If so, next time you restart it should still work. Finally. This thing has been dogging me for a long time.

  • I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    Downgrading the iOS is not supported by Apple.Have yo tried:
    - Backing up and restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    - Go to the OverDrive support site

  • Mail search function does not work after reinstalling

    Hello!
    I recently had to re-install Leopard on my MacBook Pro.
    I made a clean install so, I manually copied the Mail folder and preferences from my old home folder to the new one.
    All mails are present, and everything works great, apart from the fact that the search function does not work.
    I can search for new mails (that came after the reinstall) but the old ones "dont exist" as far as the mail.app goes.
    What can I do about it ?

    It would probably be easier to do the entire hard drive. The App Store also uses Spotlight, so updating it will help there also. It takes some time to re-index and your computer will/may run slower until it is done.
    Direct answer to your question is go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Then go to System Preferences/Spotlight per the linked article and in your user folder, select Library/Mail/V2.
    Thanks to leonie for some information contained in this.

  • MS office report function does not work after building the appication

    I use the MS office report function  with a custom excel template my application.
    It works properly in de developstate, but after building the application it does not work .
    I use office 2000  and Windows XP

    jmq wrote:
    I use the MS office report function  with a custom excel template my application.
    It works properly in de developstate, but after building the application it does not work .
    What error message if any did you get? It could be a couple things:
    1. Did you include the Report Toolkit's dynamic vis in the app's build process?
    Ref: Error 7 when Running an .EXE Using VIs from Report Generation Toolkit for MS Office
    2. How are you giving the path to you custom template, as a relative or an absolute path? The path will be different for the .exe. You have to strip twice.
    Ref: Why Can't My Executable Load My Included File When I Use Relative Path Encoding?
    =====================================================
    Fading out. " ... J. Arthur Rank on gong."

  • Caps lock green light not working after coke spill. Help!?

    Hello.
    I accidentally spilled some coke on my brand new macbook pro! I can't believe how horrible this year has been for me so far. I rarely even drink coke! Anyway, I cleaned my macbook with some dry towels, then some laptop cleansing wipes and then I used a vacuum cleaner to get all the liquid out from underneath the keyboard. Everything's working fine. It's just that my keys are super sticky. Any help with that? I tried taking the keys off and cleaning them - no luck so far.
    Then I realized that the backlights from some of the keys aren't as strong as the other ones.. Can I do something about it?
    Also today I realized that the green light from the caps lock button isn't working properly. It lights up whenever it wants to and such. Help?
    If I was to take my laptop to get it fixed, what would it all cost me? My macbook is barely a month old and I've already caused such a chaos.
    Could anyone give me a decent answer to my questions? It would be very much appreciated!

    I'll take it to a friend who's an IT tomorrow. If he says that I must take it to the repair facility then I definitely will. Also, it wasn't a dollar can of coke. I had a glass which I didn't even take next to my MBP. Then for a second to plug in my charger, I put it down next to it and that happened. It's not sloppy care. I take care of it more than I've taken care of anything. Spilling coke on it was my mistake and I hope it'll never happen again. I am facing the consequences. For anyone else who's in the same situation or is just interested- I'll let you know how this works out.

  • Some Widget does not work after latest upgrade

    Today is July 23rd, 2011. By recent latest upgrade, mainly for supporting Lion, where I am still using Snow Leopard 10.6.8, some widget does not work, including Battery Meter, Digital Clock Alarm, Victoria Digital Clock, etc.
    By the way, my company use Chatter and I installed Chatter Desktop. Again, after recent upgrade, it no longer work anymore.
    Do you experience the same problem?
    For those who has upgraded to Lion, do you also find some widget does not work?

    I have read a couple of complaints like that, but not sure it's widespread.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

  • Apple tv not working after latest update

    apple tv not working after installing latest update.

    I have the latest update of the Remote app on my iPhonne but still no AppleTV icon visible.
    how can I do a roll back on my Apple TV?

  • Passing arrays with Call Library Function does not work after application builder

    Calling a DLL with Call Library Function which requires an array of data works correctly in Labview, but after building an exe with application builder, the call no longer works.  Dereferecing the pointer in the DLL retuns all 0s and not the actual values.
    Solved!
    Go to Solution.
    Attachments:
    TEST.zip ‏28 KB

    I did not run your code because it is a little unclear to me what it does.
    Two things:
    First, is the DLL you are calling the DLL-ified version of PopUpNames.vi? Then the problem is likely that the panel is not being built into the DLL.
    When LabView builds an application / dll, it strips the front panel and block diagram from all VIs that it doesn't think need to show a panel at run time. This reduces file size and increases code security. The App Builder's panel inclusion logic can be overridden by Build Specifications -> Source File Settings -> Remove front panel. A better method is to put a property node on a control in a window you want to show marking it "visible"; this is sufficient to tell the App Builder it should keep the panel.
    Currently Source File Settings shows "no dependencies" (clearly incorrect---another evil side effect of Express VIs I guess) but if you change the settings as shown below to keep ALL panels, one might hope the App Builder can figure it to keep the panel when it deconstructs the Express VI. (Alternatively convert the Express VI into a regular one.)
    A second comment: I am a bit flummoxed at the larger goal here. You are calling LabView DLL from LabView, which doesn't make a lot of sense, so I assume your larger goal is to call LabView from C or vice-versa. In that case be aware that your DLL is x86 (32-bit) but you are passing 64-bit ints as your pointers. In this case it is 32-bit LabView with 32-bit pointers in embedeed in 64-bit containers calling 32-bit LabView with 32-bit pointers in embedeed in 64-bit containers, so it all works, but if your going to call this from C or whatnot you're going to have to follow that same design.
    When calling C code the LabView Call Library Function does have a "unsigned pointer-sized integer" data type that always appears to be 64 bits in the dev env but which actually passes a 64 or 32-bit int to the DLL depending on the environment. The "pointer sized int" has to be 64 bits in the "LabView" part of the code because LabView's strong typing requires the data type to be determined at compile time. Casting all pointers to the largest data type in LabView makes it possible to write platform-independent code, but down at the Call Library level you still have to put the right number of bytes on the stack.

  • MacBook Pro Late 2011 Model - Does not work after Yosemite update

    i recently updated my OS to Yosemite and had in problems for two days but yesterday it ceased to work in the middle of printing a document.
    I need my laptop back up and running since I have school exams soon and vital information and files are in this laptop.
    i Have never had a problem with the laptop before.
    Issues that I have had
    logging in takes at least 20 minutes
    cannot progress further than that, desktop is blank and nothing loads, only the dock.
    battery drains extremely fast
    Safe boot does not even load
    I've tried clearing that VRAM and the other one.
    Cannot access anything at all
    This is appalling and at the worst possible time.

    Please describe exactly what you're doing and what happens.

  • My sound device does not work after yesterdays update

    after the last update my sound device is out of system.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • Fly out tool menus are not working after latest update-help?!

    Attempting to click/hold click is not expanding the tool fly out menus in Illustrator after the latest update. I did discover that alt + left click will rotate tools, but I would still like to be able to access the fly out menus. Any help would be appreciated!

    ''tenderprey [[#answer-668426|said]]''
    <blockquote>
    So, it sounds like there's a compatibility problem. I didn't realize that Firefox accesses Silverlight in a whole different way. Do you think Firefox needs to be updated/patched to be able to work with the Silverlight plugin again, or does the plugin need to be updated to be compatible with the latest version of Firefox?
    </blockquote>
    First of all, I´m not a IT guy...just a fan of "firefox".
    Regarding your question, since this issue started with the 34.0.5
    version of "firefox" it´s my opinion that it´s "firefox" the one that
    should be updated/patched to work again with "netflix".
    to fix such issue.

  • Acrobat Pro Not Working after Latest Update to Snow Leopard

    After getting the latest update for Snow Leopard I get the following when Acrobat tries to boot:
    Process:         AdobeAcrobat [157]
    Path:            /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
    Identifier:      com.adobe.Acrobat.Pro
    Version:         9.0.0 (9.0.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [77]
    Date/Time:       2010-03-31 11:25:30.253 -0600
    OS Version:      Mac OS X 10.6.3 (10D573)
    There is more after this but the summary is that it doesn't boot. Is anyone having this problem also? And if so how did you fix it.? I have tried uninstalling and reinstalling Acrobat but with no success.
    Thanks in advance.
    David

    BBfolgart wrote:
    Hi Michael,
    Thanks for your reply. However how can you upgrade when the program won't boot? I tried downloading again from Adobe but the version that comes over is 9.0. Is there anyway to force a load? Or anyway for Adobe to push me 9.3.1?
    Regards,
    David
    First try removing preference  and or .plist files for Acrobat. Then when you get working try this tip below that might help when you update the application and it fails.
    I've come across this in these forums That may or may not solve the update issue for "some" people:
    <http://forums.adobe.com/message/2692924#2692924>
    see if you think. it helps.

  • Smart mailboxes not working after latest update

    My smart mailboxes are all showing empty, including one whose entire duty is to show unread mail.
    How do I restore their functionality?  I did the index build but from what I can tell that does not affect smart mailboxes.

    Thanks for your suggestion, it has solved my difficulty. For informational purposes I will publish my post and the solution in hopes it will assist others.
    I am running Final Cut Pro 6.0.5. My Sony SR12's drive is recognized during the Log And Transfer process. The problems continue. All of the thumbnails have a grayish/brown band going right through the middle of each one. I am able to play the clip in the Log and Transfer window but as soon as I attempt to drag the clip to the media box, FCP crashes. I had this same problem with iMovie 7 and found that updating to the latest version solved the problem. In this case however, FCP 6.0.5 is the latest version. I have the same problem with Final Cut Pro Express 4.0.1 but again, not with iMovie 7.1.4. I loaded Sony’s XDCAM software as well just in case but it did not do anything to help the situation.
    When I trashed the Perian component along with QuickTime preferences it did the trick. I believe it was the old version of Perian causing the conflict with Final Cut Pro’s Log and Transfer option, not the Quick Time preferences. When I installed the newest version of Perian which is 1.1.3 there didn’t seem to be any conflict and the HD clips from my Sony SR12 imported fine with no further crashes.
    MacBook Pro 17" 2.33 GHz Intel Core 2 Duo
    2 GB 667 MHz DDR2 SDRAM
    Mac OS X 10.4.11
    Final Cut Pro 6.0.5

Maybe you are looking for