HT1199 BATTERY SEEMS DOES NOT FIT IN ITS CASE
Do You know how is possible the battery is still working but its case seems out of order(Mac OSX 10.5.8)
It may help if you could take a photo and post the image here.
Similar Messages
-
Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5
Clean the lint or grit out of it with canned air or a toothpick.
-
2.5" SSD Does not fit in S10e
I ordered a OCZ vertex 2.5" 30GB to replace the factory 160gb HDD in my new S10e. The circuit board the drive connection is mounted on juts out into the drive bay, at the bottom of the bay. The HDD was able to fit because there an indention that runs across the drive just below the SATA connectors that allows it to fit. However, my SSD is squared off (no lip/ indention), so it does not fit. This seems to be an issue with the S10e, since I have another 2.5" drive that is the same shape as my new OCZ SSD. Has anyone else experience this issue? Is there a manufacturing defect with my S10e?
Thanks!Hi again.. the stripped SSD is used by only 2 user i known...
The first do this to reduce weigth in S12.. The second has the same problem as you have..
One use plastic polyurethane its more like foam
...cut a two ring squares off .. that fixed the SSD in the drive bay...
I fixed my second harddrive (without cage) with this pictured material ...its squezy and elastic..
Its out a giftbox ballpen ... ..
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
My airport card does NOT fit!
I've been searching and searching for my answer in the forums, so my apologies if the answer is already out there...
Problem:
I have a PowerMac G4 (firewire 800 - Mirrored Driver Doors).
I just bought an Original Airport Card that had said IN THE DESCRIPTION that the card would fit my specific computer.
However, when I received it, I found it does not fit!
I've looked at the computer manual and have seen exactly where the airport card should slide into.
BUT seems that the bracket that the card should slip into, is too small. I've now done search after search for which card that I REALLY do need, but all results say that this "original airport card" IS the one that I need. One result did say that I needed an adapter. But I dont see how an adapter would help me if the bracket is too small even for the card.
I am baffled and extremely frustrated.
Can someone be CLEAR about exactly what I need?
-MandyZIf it has a FW800 port on the back, it will use Airport Extreme
If it does not have a FW800 port (i.e., FW400 only), it will use regular Airport. When the original Airport cards were made and speced, the FW800 MDD G4 models had not yet been produced.
Cheers, Tom -
NB550D - battery icon does not always reflect the proper balance of time
I have just recently purchased an NB550D and I must say that at the outset I am very happy with it. It does tend to be a bit slow but I can live with that.
My problem however is that the battery icon does not always reflect the proper balance of time. For instance after a full charge it may show 9 hours remaining but after a shutdown and restart it will may show 75% and 3 hours remaining. If I shut down and restart it may show 75% and 6 hours remaining
When I first started the unit I allowed it to fully discharge (through use) three times as was suggested by the salesman at the store but quite candidly it doesn't seem to have made one scrap of difference!
Any advice will be appreciated.
RegardsRemaining time is not credible value of the battery state - it depends on actual duty of processor and the program wich estimates this sometimes shows wrong that time or corrects this after a while. Percentage of charge of battery is much better factor to use!
But in case your battery loses from 95% to 75% after restart indictates that's something wrong with the battery or program... In my NB550D after restart (pause for 1 day) the battery loses only 2-3% . -
Hi all,
I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM.
But its showing an error like 'Main window does not fit into Page'.
What could be the mistake?
Can anyone help me in this..
Regards,
ShanthiHi,
U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
if Your Space is small then data will be displayed in the next line.
And display The data in Smallest font possible.
Regards
sandipan -
Table does not fit into window.
Hi Guys,
When I execute the Smartforms I get this message ? '
"Table does not fit into window." any guess why this message ?
Regards>
P R Raghu wrote:
> "Table does not fit into window." any guess why this message ?
> Regards
If TABLE does not fit WINDOW try to take it through the DOOR LOL
Doesn't the error seems self explanatory to you?
Regards
Karthik D -
Note that the iPod touch 5th generation was updated to iOS 8. When I connect my charger to my iPod touch, for the first time, the battery indicator does not update when connected to a power source. Instead of being charged, it says that the battery is being depleted. Please fix this issue. Thank you!
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Recommends memory for Equium M50-164 does not fit
I have the Equium M50-164 in its original configuration.
I wanted to add more memory so, on the recommendation of the Toshiba Product Support page, I purchased the Toshiba PA3411S-2M1G memory module (from eBuyer).
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/individualOptions.do?service=UK&OPTION_ID=118626&t oshibaShop=true&selCategory=4700
On attempting to fit the memory module into my machine, I found that it does not fit! The plastic 'divider' between the two contacts in the laptop does not match the position of the notch between the two sets of pins on the memory module.
Tosh recommends Part Number: PA3411S-2M1G 1024MB (1GB) Memory PC2-4300 DDR2 (533MHz)
The memory that arrived has PA3411S-2M1G 1024MB (1GB) Memory PC2-4200 DDR2 (533MHz) on the box.
Someone in the forums says PC2700 PA3313U-2M1G is the part number.
The manual that came with the M50 states that PC2700 memory is required.
Does anyone know the correct part number, or a suitable alternative by a different manufacturer?
I'm quite annoyed, as the support helpline suggested I phone their Sales department! So they can sell me more incorrect memory modules?!? Now looking forward to the running the returns gauntlet with eBuyer...
Cheers,
AndyHi there,
I believe its annoying since they told you the wrong information. I wish you good luck for returning the memory module, maybe you can also try to sell it to another ebayer.
Regarding your memory: I agree with Ghost UK, you have to use DDR1 memory and not DDR2.
Dont forget to assign some reward points to GhostUK, I think he would appreciate it. ;)
Cheers guys -
"BP Category 1 does not fit the data in category 2" "Replies Appreciated"
Hi Gurus,
When i am trying to create an "Individual Account" in UI, I am getting the error "BP Category 1 does not fit the data in category 2".
If i try to create a "group" then it says "BP Category 3 does not fit the data in category 2".
It allows me to create only "Corporate Account" i..e. Category 2.
What should i do to create "Individual Account" and "Group". (Category1 & Category 3).
Individual Account (Category 1) - "BP Category 1 does not fit the data in category 2".
Corporate Account (Category 2) - Able to create only Corporate Account
Group (Category 3) - "BP Category 3 does not fit the data in category 2".
Thanks & Regards
RohanHi Rohan,
Hope this SAP Note : 1232459, Solves your problem.
You might have created a custom configuration for corporate accounts.
Unfortunately in case of custom configurations exist, they are selected with higher priority.
So in this case the configuration for corporate accounts is also shown for individual accounts,
this causes error.
In order to solve this problem, create a custom configuration for individual account also,
i.e for view BP_HEAD/AccountDetails. Object type BP_ACCOUNT and object subtype INDIVIDUAL.
Please make sure that the custom configuration includes the fields firstname and lastname for
persons instead of name1 and name2 which are only allowed for corporate accounts.
I hope the above information resolves your problem.
Best Regards
Shiven -
CRM 2007 IC : error "BP category 2 does not fit the data in category 1"
Hi Guys,
When I am trying to save the data on the Bupacreate page it gives the error as follows.
"BP category 2 does not fit the data in category 1".
Can anyone suggest what is causing this error to happen and how this error can be corrected.
thanks & regards
SandyHi,
This error usually occrus when you try to set field in without specifing bptype ie person, group etc. In our scenario we were trying to set field in Person which was not present in group. but since do_prepare_output method is same in both, that feild was getting set for group as well. When we placed restriction this error got removed.
Best regards
Pankaj Kumar -
Error: 'BP category 1 does not fit the data in category 2'
Hi,
i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
thanks:)
pushpa
*table for storing the line by line records in the excel file
TYPES: BEGIN OF TTAB,
REC(1000) TYPE C,
END OF TTAB.
DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
*variable for storing the name of the excel file to be uploaded
DATA UP_FILE TYPE STRING.
*data to be uploaded
TYPES: BEGIN OF TDAT,
FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
END OF TDAT.
DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
ADDRESS TYPE BAPIBUS1006_ADDRESS,
BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
PARAMETERS P_FILE TYPE LOCALFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = 'X'
CHANGING
FILE_NAME = P_FILE.
START-OF-SELECTION.
UP_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = UP_FILE
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
*writing out the contents of the internal table itab
LOOP AT ITAB.
WRITE:/ ITAB-REC.
CLEAR IDAT.
SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
APPEND IDAT.
ENDLOOP.
LOOP AT IDAT.
MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
IDAT-FLD2 TO ADDRESS-STREET,
IDAT-FLD3 TO ADDRESS-CITY,
IDAT-FLD4 TO ADDRESS-REGION,
IDAT-FLD5 TO ADDRESS-POSTL_COD1,
IDAT-FLD6 TO ADDRESS-COUNTRY,
IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
'0001' TO CENTRALDATA-PARTNERTYPE.
CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
EXPORTING
PARTNERCATEGORY = '1'
CENTRALDATA = CENTRALDATA
CENTRALDATAORGANIZATION = ORGANIZATION
ADDRESSDATA = ADDRESS
IMPORTING
BUSINESSPARTNER = BUSINESSPARTNER
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
REFRESH BAPIRETURN.
CLEAR BAPIRETURN.
CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
EXPORTING
BUSINESSPARTNER = BUSINESSPARTNER
BUSINESSPARTNERROLE = 'BUP001'
DIFFERENTIATIONTYPEVALUE =
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
ENDLOOP.Hi Pushpa,
you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
EXPORTING
BUSINESSPARTNER = SEARCH_PARTNER
CONTACTPERSON = CONTACT_SAP
VALIDFROMDATE = '00010101'
VALIDUNTILDATE = '99991231'
DEFAULTRELATIONSHIP =
ADDRESSGUID =
CENTRALDATA = WA_CENTRAL_DATA
ADDRESSDATA = WA_ADDR_DATA
TABLES
BAPIADTEL = I_TEL_DATA
BAPIADFAX = I_FAX_DATA
BAPIADTTX =
BAPIADTLX =
BAPIADSMTP = I_EMAIL_DATA
BAPIADRML =
BAPIADX400 =
BAPIADRFC =
BAPIADPRT =
BAPIADSSF =
BAPIADURI =
BAPIADPAG =
BAPIAD_REM =
BAPICOMREM =
RETURN = I_RETURN
hope this will help you
Siva -
I have a Macbook, 13" screen, purchased in 2007. I want to hook it up to my HDTV; I purchased a mini display port to hdmi adapter but it does not fit. Any suggestions?
If you connect yourMacBook using a MiniDVI/HDMI adapter you will need to use external speakers for audio since the pre-2010 MacBooks will only send video through the MiniDVI or MiniDisplay Port . The MiniDVI/HDMI doesn't carry audio and there's no audio plugs on the TV to work with HDMI since it's expecting audio with the HDMI.
If your TV has a DVI input plug you can use a MiniDisplayPort/DVI adapter. Then a DVI cable to the DVI input plug on the TV. The TV will have RCA audio plugs for use with the DVI. Plus DVI gives a sharper image than HDMI. -
Result set does not fit; it contains too many rows
Dear All,
We are in BI7 and running reports on Excel 2007. Even though number of rows limitation in Excel 2007 is more than 1Million, when I try to execute a report with more than 65k records of output, system is generating output only for 65k rows with message "Result set does not fit; it contains too many rows".
Our Patch levels:
GUI - 7.10
Patch level is 11
Is there any way to generate more than 65000 rows in Bex?
Thanks in advance...
regards,
Raju
Dear Gurus,
Could you please shed some light on this issue?
thanks and regards,
Raju
Edited by: VaraPrasadraju Potturi on Apr 14, 2009 3:13 AMVara Prasad,
This has been discussed on the forums - for reasons of backward compatibility I do not think BEx supports more that 65000 rows .... I am still not sure about the same since I have not tried out a query with more that 65K rows on excel 2007 but I think this is not possible... -
JSP error page does not displayed on its own, includes in the original JSP
Problem Description: - Exceptions in a Condition cause pages to fail to render.
The actual issue is, the JSP error page does not displayed on its own, included in the original JSP Page when exception occurs.
Problem Cause: As per the JSP specification when jsp content reached the buffer size (default 8KB) the page being flushed (Part of condent displays). The default �autoFlush� value is true.
When the page buffer value is default size (8KB), and if any exception occurs after flushing the part of the content, instead of redirecting into error page, the error page content included in the original page.
If i specify autoFlush="false" and with default buffer size, at the runtime if the buffer size is reached, i am getting stackoverflow error.
To solve the above problem we can make it autoFlush=�false� and buffer=�100KB�. But we can�t predict the actual size of the page.
I found in one of the weblogic forum as no solution for this issue. Ref.
http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_clfydoc&answerpage=solution&page=wls/S-10309.htm
Please provide me any solution to resolve the problem.Error-Page tags work best with an error.html pages. If you have an error.jsp page what I would do, and I have, is wrap my classes and jsp pages in a try catch block where you forward to the error jsp page and display anything you want. YOu can also do this with if else statements. I have used the tomcat error pages before but when I've implemented them I used java.lang.Exception as the error to catch not Throwable. I don't know if this would make a difference or have anything to do with your problem.
Maybe you are looking for
-
I haven't done anything differently. It just stopped working
-
Missing information when updating invoice line
Dear all, I am updating invoice line information but system giving and error declare begin for rec in (select l.* from ap_invoices_all l where invoice_num = 'akp/445' and vendor_id = 1068 and org_id = 82) loop AP_INVOICES_PKG.Update_Row(X_Rowid => 'A
-
Getting error while uploading data to the CCM thru excel file.
Hi while uploading supplier data to CCM i am getting error " The destination FXP_HTTP_ADAPTER has not been maintained! (see long text) " Error when sending to SAP XI; upload canceled ". FXP_HTTP_ADAPTER (Production) - is not maintained in SM59 tra
-
Interfacing SAP R/3 4.7 Order Management with GTS 3.0 or GTS future release
Scenario I During order entry (Tcode VA01) in SAP R/3 4.7 users would like to prevent an order from being saved for a certain product if it is not ok to order / blocked for shipment. The current thought is that GTS (version 3.0) has data loaded that
-
How to set resolutin in bridge??
it has been suggested that I set my resolution to 300ppi to help reduce im work flow. How do i set resolution in bridge??