HT1199 my mac pro will not install updates or new software such as printers what could be the problem

I have tried to complete updates and install software and for some reason it will not update or install new software such as a printer. What could be the problem

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Similar Messages

I am trying to put music into my 3rd gen ipod touch and older ipod shuffle but they do not show up on Itunes when i connect them,what could be the problem?

i am trying to put music into my 3rd gen ipod touch and older ipod shuffle but neither are popping up on itunes, what could be the problem?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Mid 2010 Mac Pro will not install 10.7.3 update

Hi all,
My Mac Pro (Mid 2010) will not install the 10.7.3 combo update. I use the software update tool to download the update, it goes to reboot. It starts loading the update in and at the very end it will tell me none of the updates can be installed because an unknown error has occurred. I have tried multiple times and had the same result. It also will not install any other updates such as the Airport Utility and iTunes update. This is a work computer so I think it is important to have all the updates installed on it.

Then the problem is:
You have Apple Pro RAID controller
A software RAID
Lion Recovery should be on one of your hard drives, not RAID.
Do a clean install of Lion on one of the other hard drives you have
Anything else we should know about your setup? controllers do matter.

Windows XP-Pro will not install on my new P965 Platinum

I hope someone can help me with my problem.
It seems that everytime i try to install Windows XP-Pro after the initial
drivers setup i get this Error Message:
A problem has been detected and windows has been shut down to prevent
damage to your computer.
If this is the first time you've seen this stop error screen, restart
your computer. If this screen appears again, Follow these steps:
Check to be sure you have adequate disk space. If a driver is identified
in the stop message, disable the driver or check with the manufacturer
for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS
Memory option such as caching or shadowing. If you need to use Safe Mode
to remove or disable components, restart your computer and press F8 to
select Advance Start up options, and then select Safe Mode.
Technical Information:
*** STOP: 0x0000007E (0xc0000005, 0xF78350BF,0xF7C81208,0xF7C80F08)
*** PCI. sys-address F8350BF base at F782E000, Datestamp 3b7d855c
This is a new build with a Samsung Spinpoint SP2504C SATAII Drive but
when this occurred i thought that it might be the drive that was the
problem.So i therefore put it i my Old PC and tried to install Windows
XP-Pro onto it which i did with no problems at all.
I then put the drive back in my New PC where it Booted Up First Time and
runs OK and i have even installed Software onto it.In fact i am using at
this very minute as i type.
Unfortunately when i still try to Reinstall Windows XP-Pro on my New Build
with my P965 i get the same Error Message as above.
Can anybody please help.
Thanks
P965 Platinum
Intel Core 2 Duo E6300
Samsung Spinpoint SP2504C SATAII
Corsair 1GB DDR2 Twin2X(5x512MB)
inno3D GeForce 7600GT
Creative Sound Blaster X-Fi Extreme Music Sound Card
NEC ND-3520 DVD
Arctic Cooling Freezer 7 Pro
Thermaltake Toughpower 600W
Thermaltake Tsunami Dream Case

Quote
I hope you don't mind me asking this question for Jack the Newbie.
You say i have to use a Windows XP-Pro Install-CD that includes SP2 as well as the JMicron driver for the JMicron IDE-Port which i have my Optical Drive connected to.I know this is telling me how to fix my problem, but what i would also like to know is WHY do i have to install it with SP2 & the JMicron driver like this on my P965 when it installed on my old pc with just the XP-Pro Install-CD.
Your Windows Installation CD should be as up to date as possible, especially for newer hardware. SP1 is from 2002, SP2 was released in 2004. Neither SP1 nor SP2 install CDs provide the proper drivers for the JMicron chipset used on your mainboard. I cannot give a detailed list about the differences between SP1 and SP2. I just know, that there are a lot of problems when people do not use SP2 on Intel 975/965 Chipset-boards which where released in 2006.
When you say that your installation works fine on your old PC I believe you. It worked on my old Laptop too. However I was not able to install XP Pro on my 975X-board without SP2 at all until I upgraded my Installation CD.
Quote
Garfield,
I had exactly the same problem--because I had my optical drive hooked up to a Promise IDE controller, rather than to a mobo IDE connection. Turns out the Promise will read and write the optical drives OK, just won't boot from them properly. And, somehow, that affects Windows Setup.
I don't know anything about the JMicron and the need for SP2. But, as you can see from my sig, I'm using XP Pro SP1, and once I moved my NEC 3500 back to the mobo IDE (as secondary behind my IDE hard disk) everything worked like a champ.
Just my $.02.
Stahlwird
To relate Garfields problem with your solution is a mistake. Your board does not use any JMicron hardware, has NVidia chipset instead of Intel and an AMD CPU. Your are talking about a totally different Setup here.

HT1222 Will not install updates?

My mac mini will not install updates?
Model Name:    Mac mini
Model Identifier:    Macmini1,1
Processor Name:    Intel Core Duo
Do you think it is because I have MacKeeper?

Hi Drew,
I have no idea how they can get away with advertising MacKeeper at all.
I even avoid linking to sites that advertise it.
You really really need to uninstall it, but maybe not using their uninstaller.
Klaus1's great post on MacKeeper...
https://discussions.apple.com/docs/DOC-3027#comment-2156
More...
https://discussions.apple.com/message/15732233#15732233
https://discussions.apple.com/thread/2779849?start=0&tstart=0
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/

16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What

16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What happened?what do I do now??????? Help!

Note that you don't have a Mac Pro as stated. Your profile says you have a MacBook Pro. Please clarify as they are entirely different computers. If nothing below works for you, then make a Genius Appointment and take it in for service.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

2009 Mac Pro will not boot up under Windows

I have an Early 2009 Mac Pro system (Mac Pro 4,1) and I've had this system for 3 years already and have been working under OS X with this system ever since I purchased it.
However, when I tried to boot off my Windows disk, something very interesting happens. The Mac Pro WILL NOT boot up off the Windows disk or a known working Windows partition if two monitors are connected. Upon holding down the option key and selecting the Windows partition, I will get a black screen on one monitor (the one connected via Mini Displayport) and the other screen receives no signal and will enter standby and the system is halted. It does not respond to keystrokes, there is no hard drive activity, no measured power increase on the UPS, no apparent network activity, nothing. The only way to exit this scenario (from what I can tell) is to power off the machine, disconnect the display on DVI, power on the machine again, select the Windows partition wait for the system to reach the login window and reconnect the DVI monitor (at which time Windows recognizes it immediately and the system works fine again).
My question to the community is, does anybody know why this is happening and is there a known fix for this? Quite frankly, having to disconnect a monitor just to restart is very tedious and frustrating.
I have two Samsung P2350 monitors attached to an ATI Radeon HD 4870 (512MB, from Apple). One is monitor is connected via directly DVI and the other is using a Mini Displayport to DVI adapter. Both monitors work fine under OS X with no issue. At first, I thought that this may be a driver issue on the Windows side and after installing all the latest updates and drivers the issue is still apparent. From what I can tell, this doesn't seem like a software issue but rather a firmware or EFI issue as this happens before Windows even loads.
If anyone knows of a fix or what to do in this situation, or if you are also having this issue, I would love to hear your input!
Thank you!
For the record, I am running all the latest software builds on the OS X side (10.7.4, not that it would really matter at this point). I have also disconnected all unnecessary equipment in a trial and error scenario but the results are still the same.
The system passes all ASD testing.
The full specification of the computer and all connected equipment are as follows:
2009 Mac Pro (4,1) 8-Core
2x Intel Xeon Nehalem 2.66GHz Quad-Core CPUs
16GB DDR3 ECC 1066MHz RAM (Apple Branded)
Two OWC 120GB SSDs (One for OS X, the other for Windows 7 x64) - These are in place of my optical drives.
4x 2TB WD Black Hard drives for storage.
Two Samsung P2350 Monitors connected via DVI. (One using a Mini Displayport to DVI adapter).

In Windows I am using the latest (12.4) Catalyst Software Suite, 64 bit of course, downloaded directly from AMD's site after installing the drivers from Boot Camp.
As for installing Windows I used an original (not burned) installation media (Disk is in a pristine condition). And yes, Windows is fine, the problem just seems to be getting the system to boot up Windows with that second monitor. However if the "problem monitor" is disconnected the system boots fine 100% of the time and connecting it later after booting the system will still operate properly.
For the sake of arguement I swapped monitor cables and connected the "second" monitor to the mini displayport adapter to verify that it wasn't a cabling issue and I'm still yielding the same issues.
As for GPU testing, I've played games (Crysis, Grand Theft Auto IV, Battlefield 3, etc.) and I've had no issues with the card or stability.
You would think that Apple would try to find a fix for this, especially considering the caliber of this machine.

Mac Pro will not shut down

As the subject line says, my "early 2008" Mac Pro will not shut down. I have let it set overnight and it will not shut down or restart. I also installed an update which required a restart, selected to restart and the computer would not. Also, whenever I boot up, the computer hangs and will not load the finder. I have to do a "hard" restart and after a couple tries it eventually works...should I just call Apple?

Forced shutdowns tend to cause more directory errors.
How many drives?
Any green version?
Did you disable "allow disks to spindown"?
Possible it is an external USB printer or device, or cable?
I'd boot from another hard drive and do system repair and maintenance.
Create another boot volume if need be.
Startup with using Disk utility but also Disk Warrior.
And when it is working, make backups with CCC or SuperDuper.
Lacking that, boot from OS X DVD and go to Utility menu and access Disk Utility.

Mac pro will not restart.

When I try to update software my mac pro will not restart. So the software does not update. What to do? I have tried unpluging all external drives. No luck. The screen just stays in the infinity picture. I have tried waiting 5 minutes. Still no restart.

You are still using 10.6.8, just to confirm, so you don't have Recovery Mode for one thing. But do you have a backup that is bootable? make one now before you do more. And try repairing the drive as well as doing a Safe Boot.
You may need to do a clean install to another drive. Apparently you have another Mac or something to post and get online so you could also use Target Disk Mode to access the system in trouble.
Update with what from what? what other internal drives are there?
Clone
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.bombich.com/
Create an OS X Lion Install disc
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
General Mac maintenance: Tips to keep your Mac in top form
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary account to isolate user-specific problems: Isolating an issue by using another user account
To resolve startup issues and perform disk maintenance, use Disk Utility.
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode

Mac Pro will not restart from dropdown menu

Hi all,
My Mac Pro will not restart from the dropdown menu or when clicking the 'restart computer' when installing software updates. I have an external firewire hard drive hooked up as part of my backup process. It contains a clone of my startup disk.
I have tried disconnecting the firewire drive, rebooting then attempting to restart from the dropdown menu. Still no joy. I always have to end up shutting down manually by holding the power button in and then restarting with the power button.
Any thoughts?
Thanks in advance.
Dennis

You might try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your Shutdown functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
EDIT: Also, if you can launch Activity Monitor in your Utilities folder and see if you can find the process that is still running.
-mj
Message was edited by: macjack

Mac Pro will not reboot after Bootcamp attempted installation

I have an older quad-core 2009 Mac Pro. I tried to install Bootcamp before realizing that it's not supported. Now the Mac Pro will not reboot.
It starts up fine. It shuts down fine. But it just will not reboot. When I try to reboot, it just clicks like it's trying to boot to a DVD or a drive that's not there (I have since formatted the drive I was using for Bootcamp and use it for Time Machine now).
This is what I have tried:
- PRAM reset
- SMC reset
What could be keeping my Mac Pro from rebooting properly?? Please help. Thank you!!

So you tried with Mac and Windows on same drive?
And you have Recovery partition.
You made a clone with CCC as well and cloned the Recovery
Paragon makes a couple programs to make life easier.
And, Well, Boot Camp works. There are unwritten rules. There is a forum devoted to it.
2009 is not old. Old is pre-2008 due to UEFI / EFI64 and how Windows 64-bit now looks during install.
It did install but the drivers and updates and such might be an issue.
Apple does not support HFS arrays, not just that Windows won't install but to mount, their Apple HFS driver.
You left out so much and maybe your IT didn't include Windows on Mac.
www.apple.com/support/bootcamp
In general pull all your drives during install except that one Windows will be installed on.
Do get video driver from ATI etc yourself
Tell us what version, I assume Windows 8 which works fine other than a few issues - more with MacBook series and iMac or Mac Mini lines.

Mac Pro will not find boot volume

Hello,
My Mac Pro will not find it's boot volume. Each time the computer is started, the blinking folder with the question mark is the result. A working install of 10.7 does exist on the machine's primary hard drive. If I were to press the option key on boot, I can select the primary hard drive (after entering the password) and everything boots as normal. I have run TechToolPro on the volume with no detected errors, even after a volume rebuild. A Recovery HD partition is not on the boot volume. Should that matter?
I really really do not want to reinstall Mac OS X. I have hundreds of gigabytes of data in question. Any reinstall/reconfig would take days to complete.
Thanks

So you are saying that setting the default in Startup Disk doesn't work?
And you have not got or been using Carbon Copy Cloner or another to provide working bootable backup?
You should have Lion Recovery on one of your drives, do a clean install.,
I assume TTPro media scan turns up no errors.
MOVE all your data OFF the boot drive. Keep the system OS and apps on its own drive.
Clone the system. Use TimeMachine and cloning for backup.
And how is the pram battery?
Any time you zap pram you lose the default and it will look for it like you see starting with SATA0 (bay 1)

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

Mac Pro will not restart after installation of Lion. Help!

Mac Pro will not restart after installation of Lion. Help

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

My brand new Mac Pro running Mountain Lion crashes when installing updates or new software.

My brand new Mac Pro running Mountain Lion crashes and re-boots when installing updates or new software. I can only perform these operations while in the safe boot mode. I have reloaded OSX twice. Does not solve the problem. The machine is brand new. It replaced a previous MacPro that would not support the new Mountain Lion. When my new machine came in. I swaped the dirve out of my old unit into the new and ran the new Lion update. The machine has had this aforementioned problem since that time. Also, I had the Legacy version of File Vault running on the old machine/drive, which I also turned off(thinking that was the problem) but that did not fix the problem either.

Here is my panic log entry:
Sun Nov 18 22:08:42 2012
panic(cpu 6 caller 0xffffff800b4ac90b): Releasing non-exclusive RW lock without a reader refcount!
Backtrace (CPU 6), Frame : Return Address
0xffffff8556cab950 : 0xffffff800b41d626
0xffffff8556cab9c0 : 0xffffff800b4ac90b
0xffffff8556cab9e0 : 0xffffff800b51c09c
0xffffff8556cabc10 : 0xffffff800b510e92
0xffffff8556cabc40 : 0xffffff800b4ff375
0xffffff8556cabf50 : 0xffffff800b7e182a
0xffffff8556cabfb0 : 0xffffff800b4ced33
BSD process name corresponding to current thread: installd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000000b200000
Kernel text base: 0xffffff800b400000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 427147359117
last loaded kext at 111975561856: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f8ba85000, size 229376)
last unloaded kext at 127467947009: com.apple.driver.AppleIntel8254XEthernet          3.1.1b1 (addr 0xffffff7f8bf8d000, size 69632)
loaded kexts:
com.zeobit.kext.Firewall          2.3.1
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleIntelProfile          97
com.apple.driver.AppleBluetoothMultitouch          75.15
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleHDA          2.3.1f2
com.apple.AMDRadeonAccelerator          1.0.0
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.driver.AppleUSBHub          5.2.5
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.Intel82574L          2.3.0b4
com.apple.BootCache          34
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBUHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleProfileTimestampAction          97
com.apple.driver.AppleProfileThreadInfoAction          97
com.apple.driver.AppleProfileRegisterStateAction          97
com.apple.driver.AppleProfileReadCounterAction          97
com.apple.driver.AppleProfileKEventAction          97
com.apple.driver.AppleProfileCallstackAction          97
com.apple.iokit.AppleProfileFamily          97
com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
com.apple.driver.AppleMultitouchDriver          235.28
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.AppleUSBAudio          2.9.0f6
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOAcceleratorFamily          19.0.26
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.kext.AMD5000Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleUSBHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

HT1199 my mac pro will not install updates or new software such as printers what could be the problem

Similar Messages

Maybe you are looking for