HT1212 can someone help me please ?
what do i do my ipod touch is disabled and it has never been synced to my new computer and i never set up the back up for it ?
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
Similar Messages
-
So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?
I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.
-
I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?
Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?
-
I run an itune 10.4 and would like to back up my entire library to a DVD, because I do not have an external hard drive to back it up to (as the "help" topic is suggesting). Is it possible?...and if so, can someone help me please.
This is no longer done via iTunes.
Use whatever CD/DVD burner software is installed on your computer.
Add the iTunes media folder to the list of files/folders to burn to disc. -
I had backed up my IPhone 4s on iCloud on Jan 19. I am now trying to do another back up but it says the time required is 7 hours. It appears to long a time for 1GB of data stored on the iCloud. Can someone help me please?
To be honest, that sounds about right.
For example on my 8Mbps (megbits) down service I get around 0.4Mbps upload. That is the equivalent of (very approximately) 3Mb (megabytes) per minute or 180Mb per hour. Over 7 hours that would be just over 1Gb.
Obviously, it all depends on your connection speed, but that is certainly what I would expect, and that is why I use my computer for backing up, not iCloud. So much quicker. -
i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Everytime i try and send a message to my boyfriend through imessage on my ipad, it says "Message send failure" but all of the messages are coming in through my email, i hate texting my boyfriend through my email. So can someone help me, please.
"iMessage allows users to send texts, photos, videos, contact information, and group messages over Wi-Fi or 3G to other iOS 5 users, thus providing an alternative to standard SMS messaging for all users with devices running iOS 5."
This is what it is and what it does. You both have to have iOS 5 installed on your supported device. If that's not what your setup is, then that's your answer. -
When i want to install itunes 10.5 there is an error (some keys are not found). Can someone help me, please???
I have solved the Problem
-
HI was wondering if anyone can help me. everytime i update/amend my playlist via my ipod touch 4G and then connect it to my laptop/itunes my playlist reverts back to how it was prior to me updating it. Can someone help me please?
Contact Mercedes if you want to use the dock connector for the the input to the car system. Does Mercedes say it is compatible with your model iPod and its iOS version?
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
You can get a cable that goes from the headphone jack and an AUX in on the car system if the car system has such an input. -
mac app is asking me to update an app, but it does says that its with another account that is not mine, can someone help me please?
same issue here with MacTracker 6.2 that I don't have but shw in the Update part, when clicking it asks me to log with [email protected] account first which is not mine
-
why when i'm watching at youtube the videos keep going down. or sometimes it says it "html" can someone help me please?
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Now open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Not empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Now try a video. If that didn't help, click: Request HTML Player here > YouTube -
HELP..... i am not sure how to remove my sync albums from my iphone4 i have tried everything can someone help me please thanks
Go on to iTunes, and uncheck the albums you want removed. When the phone re-synces, they will be off.
-
I can´t syncronize my iphone to the pc; can someone help me please?
I have being tying everything that al the forums that I have read to syncronize my iphone to the PC with windows 7 32 bytes.
And nothing occurs. Can someone help me please.
Thanks!!!!!Try changing USB port. Install latest iTunes. Does iPhone appears in it ? If not, uninstall all USB devices. Connect iPhone to computer. See.
-
In a search I changed the Brazilan store to the Canadian store and now I cannot get back, and Bcause of that I cannot buy anythin at the apple Store. Can someone help me please?
Click here and follow the instructions to change the iTunes Store country.
(86100) -
Why am I having trouble loading apps and updates on my iPad? I have closed out all my apps and rest my iPad but still no luck. Can someone help me please?
Try a reset, press and hold both the home and power buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
Maybe you are looking for
-
Transfer of Costs in Product Cost Collector to COPA
Dear Experts, Please can you advise me on this current issue I'm having. Below is a description of problem: Customer is currently using report designed in COPA (KE30) to derive P&L report for using Plant as a characteristic. This was being done at a
-
No return in JS when accessing an applet in loading process
When I try to access a property or a method of an applet which is not completely loaded by the plug-in, my javascript instruction never returns. Not even an exception or a null. The CPU is 100% busy with the netscape.exe for ever. When I close the br
-
I wanna make password for photos or for folder
please i want to make password for photos i dont want to upload them into another app and delete them from photos i just wanna make password for my orginal photo app or folder please tell me how my mobile iphone 5c
-
MDRT$ Not Getting Cleaned Up
We are having an issue where the MDRT$ tables remain in the schema after the spatial index has been dropped. I checked user_sdo_index_metadata and the MDRT$ do not exist in the table. Does anyone know if Oracle supports the manual dropping of MDRT$ t
-
JDBC+oracle+network adapter!!!
I have a jdbc program question: the oracle jdbc example Employee.java,I can run it under (win2000+oracle8.05),but when I run it under linux(redhat 6.2+Oracle8.16),the error show:"the network adapter can not estblish the connection",I can use the netw